An N/M-Ratio All-Digital Clock Generator with a Pseudo-NMOS Comparator-Based Programmable Divider

A multiplying delay-locked loop (MDLL)-based all-digital clock generator with a programmable N/M-ratio frequency multiplication capability for digital SoC is presented. The proposed digital MDLL provides programmable N/M-ratio frequency multiplication using a new high-speed Pseudo-NMOS comparator-based programmable divider with small area and low power consumption. The proposed MDLL clock generator can also provide a de-skew function by eliminating the phase offset problem caused by the propagation delay of the front divider in conventional N/M MDLL architectures. Fabricated in a 0.13-µm 1.2-V CMOS process, the proposed digital MDLL clock generates fully de-skewed output clock frequencies from 0.3 to 1.137 GHz with programmable N/M ratios of N = 1~32 and M = 1~16. It achieves a measured effective peak-to-peak jitter of 12 ps at 1.0 GHz when N/M = 8/1. It occupies an active area of only 0.034 mm2 and consumes a power of 10.3 mW at 1.0 GHz.

A Low-Jitter Harmonic-Free All-Digital Delay-Locked Loop for Multi-Channel Vernier TDC

This paper presents a low jitter All-Digital Delay-Locked Loop (ADDLL) with fast lock time and process immunity. A coarse locking algorithm is proposed to prevent harmonic locking with just a small increase in hardware resources. In order to effectively solve the dithering phenomenon after locking, a replica delay line and a modified binary search algorithm with two modes were introduced in our ADDLL, which can significantly reduce the peak-to-peak jitter of the replica delay line. In addition, digital codes for a replica delay line can be conveniently applied to the delay line of multi-channel Vernier TDC while maintaining consistency between channels. The proposed ADDLL has been designed in 55 nm CMOS technology. In addition, the post-layout simulation results show that when operated at 1.2 V, the proposed ADDLL locks within 37 cycles and has a closed-loop characteristic, the peak-to-peak and root-mean-square jitter at 800 MHz are 6.5 ps and 1.18 ps, respectively. The active area is 0.024 mm2 and the power consumption at 800 MHz is 6.92 mW. In order to verify the performance of the proposed ADDLL, an architecture of dual ADDLL is applied to Vernier TDC to stabilize the Vernier delay lines against the process, voltage, and temperature (PVT) variations. With a 600 MHz operating frequency, the TDC achieves a 10.7 ps resolution, and the proposed ADDLL can keep the resolution stable even if PVT varies.

Analysis of impact of group delay on slope distortion of S-curve in delay locked loop

As essential specifications of correlation domain for signal quality evaluation, distortions of the S-curve, including bias and slope distortions of the zero-crossing point, are usually selected as indicators of optimisation in the process of designing the channels of receivers or navigation satellites. Focusing on this issue, we present a detailed analysis of slope distortion in the presence of group delay and amplitude distortions. After validating the theoretical results, we present further discussions about the impacts of different group delay terms on slope distortions. The results indicate that both the odd-order and the even-order terms have impacts on the slope distortion, and higher odd-order terms have less slope distortion compared with the lower odd-order terms. These results are useful for evaluating the slope distortion from the group delay and guiding improvement in design of the channel.

Design of Multi Standard Near Field Communication Outphasing Transmitter with Modulation Wave Shaping

The aim of this work is to tackle the problem of modulation wave shaping in the field of near field communication (NFC) radio frequency identification (RFID). For this purpose, a high-efficiency transmitter circuit was developed to comply with the strict requirements of the newest EMVCo and NFC Forum specifications for pulse shapes. The proposed circuit uses an outphasing modulator that is based on a digital-to-time converter (DTC). The DTC based outphasing modulator supports amplitude shift keying (ASK) modulation, operates at four times the 13.56 MHz carrier frequency and is made fully differential in order to remove the parasitic phase modulation components. The accompanying transmitter logic includes lookup tables with programmable modulation pulse wave shapes. The modulator solution uses a 64-cell tapped current controlled fully differential delay locked loop (DLL), which produces a 360° delay at 54.24 MHz, and a glitch-free multiplexor to select the individual taps. The outphased output from the modulator is mixed to create an RF pulse width modulated (PWM) output, which drives the antenna. Additionally, this implementation is fully compatible with D-class amplifiers enabling high efficiency. A test circuit of the proposed differential multi-standard reader’s transmitter was simulated in 40 nm CMOS technology. Stricter pulse shape requirements were easily satisfied, while achieving an output linearity of 0.2 bits and maximum power consumption under 7.5 mW.