Atypical dependence of excited exciton energy levels and electron-hole correlation on emission energy in pyramidal InP-based quantum dots

We calculate the spectrum of excited exciton states in application-relevant self-assembled pyramidal quantum dots grown in InAs/InP and InAs/AlGaInAs material systems. These types of dots have been recently shown to combine the emission in the third optical fiber window with low surface density and a reasonable level of in-plane symmetry of emitters, which predestines them for studies on single- and entangled-photon emission and for corresponding applications. The spectrum of optically active excited states is crucial for successful resonant and quasi-resonant excitation of emitters, allowing for conservation of angular momentum and addressing individual selected quantum states. Here, we show that in both types of studied dots, due to their specific morphology of truncated pyramid, the density of excited-state ladder, especially the s–p shell splitting may follow an unconventional dependence on emission energy, opposite to the one typically met in regular quantum dots. We obtain this result via modeling based on available morphological data and calculation within the multi-band $${{\varvec{k}} {\cdot } {\varvec{p}}}$$ k · p envelope-function theory combined with the configuration-interaction method used to calculate exciton states. Then, we explain this observation in purely geometric terms, as a result of an increasing effective quantum confinement width in a pyramid that is progressively cut from the top. Additionally, we show that the inverted trend is also manifested in the amount of electron-hole correlation in the exciton ground state, which also shows an anomalous dependence on emission energy and quantum dot volume.

Mitral Annular Forces and Their Potential Impact on Annuloplasty Ring Selection

Objectives: To provide an overview that describes the characteristics of a mitral annuloplasty device when treating patients with a specific type of mitral regurgitation according to Carpentier's classification of mitral regurgitation.Methods: Starting with the key search term “mitral valve annuloplasty,” a literature search was performed utilising PubMed, Google Scholar, and Web of Science to identify relevant studies. A systematic approach was used to assess all publications.Results: Mitral annuloplasty rings are traditionally categorised by their mechanical compliance in rigid-, semi-rigid-, and flexible rings. There is a direct correlation between remodelling capabilities and rigidity. Thus, a rigid annuloplasty ring will have the highest remodelling capability, while a flexible ring will have the lowest. Rigid- and semi-rigid rings can furthermore be divided into flat and saddled-shaped rings. Saddle-shaped rings are generally preferred over flat rings since they decrease annular and leaflet stress accumulation and provide superior leaflet coaptation. Finally, mitral annuloplasty rings can either be complete or partial.Conclusions: A downsized rigid- or semi-rigid ring is advantageous when higher remodelling capabilities are required to correct dilation of the mitral annulus, as seen in type I, type IIIa, and type IIIb mitral regurgitation. In type II mitral regurgitation, a normosized flexible ring might be sufficient and allow for a more physiological repair since there is no annular dilatation, which diminishes the need for remodelling capabilities. However, mitral annuloplasty ring selection should always be based on the specific morphology in each patient.

An adaptive optimal viewing angle determination algorithm for TEVAR operation

Background The determination of the right x-ray angiography viewing angle is an important issue during the treatment of thoracic endovascular aortic repair (TEVAR). An inaccurate projection angle (manually determined today by the physicians according to their personal experience) may affect the placement of the stent and cause vascular occlusion or endoleak. Methods Based on the acquisition of a computed tomography angiography (CTA) image before TEVAR, an adaptive optimization algorithm is proposed to determine the optimal viewing angle of the angiogram automatically. This optimal view aims at avoiding any overlapping between the left common carotid artery and the left subclavian artery. Moreover, the proposed optimal procedure exploits the patient-specific morphology to adaptively reduce the potential foreshortening effect. Results Experimental results conducted on thirty-five patients demonstrate that the optimal angiographic viewing angle based on the proposed method has no significant difference when compared with the expert practice (p = 0.0678). Conclusion We propose a method that utilizes the CTA image acquired before TEVAR to automatically calculate the optimal C-arm angle. This method has the potential to assist surgeons during their interventional procedure by providing a shorter procedure time, less radiation exposure, and less contrast injection.

Environmental and health impacts of spraying COVID-19 disinfectants with associated challenges

Coronavirus refers to a group of widespread viruses. The name refers to the specific morphology of these viruses because their spikes look like a crown under an electron microscope. The outbreak of coronavirus disease 2019 (COVID-19) that has been reported in Wuhan, China, in December 2019, was proclaimed an international public health emergency (PHEIC) on 30 January 2020, and on 11 March 2020, it was declared as a pandemic (World Health Organization 2020). The official name of the virus was declared by the WHO as “COVID-19 virus”, formerly known as “2019-nCoV”, or “Wuhan Coronavirus”. The International Committee on Virus Taxonomy’s Coronavirus Research Group has identified that this virus is a form of coronavirus that caused a severe outbreak of acute respiratory syndrome in 2002–2003 (SARS). As a result, the latest severe acute respiratory syndrome has been classified as a corona virus 2 (SARS-CoV-2) pathogen by this committee. This disease spread quickly across the country and the world within the first 3 months of the outbreak and became a global pandemic. To stop COVID-19 from spreading, the governing agencies used various chemicals to disinfect different commercial spaces, streets and highways. However, people used it aggressively because of panic conditions, anxiety and unconsciousness, which can have a detrimental impact on human health and the environment. Our water bodies, soil and air have been polluted by disinfectants, forming secondary products that can be poisonous and mutagenic. In the prevention and spread of COVID-19, disinfection is crucial, but disinfection should be carried out with sufficient precautions to minimize exposure to harmful by-products. In addition, to prevent inhalation, adequate personal protective equipment should be worn and chemical usage, concentrations, ventilation in the room and application techniques should be carefully considered. In the USA, 60% of respondents said they cleaned or disinfected their homes more often than they had in the previous months. In addition to the robust use of disinfection approaches to combat COVID-19, we will explore safe preventative solutions here.

Study of ZnO-CNT Nanocomposites in High-Pressure Conditions

Recently, carbon nanotubes (CNTs) have been used extensively to develop new materials and devices due to their specific morphology and properties. The reinforcement of different metal oxides such as zinc oxide (ZnO) with CNT develops advanced multifunctional materials with improved properties. Our aim is to obtain ZnO-CNT nanocomposites by in situ hydrothermal method in high-pressure conditions. Various compositions were tested. The structure and morphology of ZnO-CNT nanocomposites were analyzed by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry—thermogravimetry (DSC-TG), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), and transmission electron microscopy (TEM). These analyses showed the formation of complex ZnO-CNT structures. FT-IR spectra suggest possible interactions between CNT and ZnO. DSC-TG analysis also reveals the formation of some physical bonds between ZnO and CNT, through the appearance of endothermic peaks which could be assigned to the decomposition of functional groups of the CNT chain and breaking of the ZnO-CNT bonds. XRD characterization demonstrated the existence of ZnO nanocrystallites with size around 60 nm. The best ZnO:CNT composition was further selected for preliminary investigations of the potential of these nanocomposite powders to be processed as pastes for extrusion-based 3D printing.

844 A Case of Pulmonary Artery Banding for Future Anatomical Repair in Congenitally Corrected Transposition of the Great Arteries (ccTGA)

This is a case of a patient prenatally diagnosed with ccTGA. Immediately after birth, postnatal transthoracic echocardiography diagnosed ccTGA with concomitant Ebstein’s anomaly of the tricuspid valve, without a ventricular septal defect (VSD). Initially, this dysplastic tricuspid valve had mild tricuspid regurgitation. However, by 12 months follow up, the patient was becoming symptomatic, and their tricuspid regurgitation had become severe. Due to the patients worsening symptoms and regurgitation, clinical intervention was pursued. The patient had Cardiovascular Magnetic Resonance performed to assess for myocardial fibrosis and to measure the size of each ventricle. After imaging and MDT discussion, the patient was deemed suitable for a double switch operation, a form of anatomical repair. However, since this patient did not have pulmonary stenosis (PS), they required a pulmonary artery (PA) band before anatomical repair. This procedure has dual benefits: to retrain the morphological left ventricle (mLV) to cope with systemic pressures, and to induce a septal shift, which can reduce the severity tricuspid regurgitation. At 18 months of age, this patient had their PA band placed. The patient immediately had a reduction in the severity of their tricuspid regurgitation. In the future, this patient will have cardiac catheterisation performed to measure mLV pressures and assess when the patient is ready for anatomical repair. The morphology of this patient is rare, as most patients with ccTGA have an associated VSD. This case describes a potential management pathway for a ccTGA patient without VSD and an Ebstenoid tricuspid valve. It also demonstrates the benefits of PA banding in a ccTGA patient with this morphology. This is a unique contribution, due to the rarity of this specific morphology and the limited evidence and guidance for its successful management.

Cutaneous Melanomas Arising during Childhood: An Overview of the Main Entities

Cutaneous melanomas are exceptional in children and represent a variety of clinical situations, each with a different prognosis. In congenital nevi, the risk of transformation is correlated with the size of the nevus. The most frequent type is lateral transformation, extremely rare before puberty, reminiscent of a superficial spreading melanoma (SSM) ex-nevus. Deep nodular transformation is much rarer, can occur before puberty, and must be distinguished from benign proliferative nodules. Superficial spreading melanoma can also arise within small nevi, which were not visible at birth, usually after puberty, and can reveal a cancer predisposition syndrome (CDKN2A or CDK4 germline mutations). Prognosis is correlated with classical histoprognostic features (mainly Breslow thickness). Spitz tumors are frequent in adolescents and encompass benign (Spitz nevus), intermediate (atypical Spitz tumor), and malignant forms (malignant Spitz tumor). The whole spectrum is characterized by specific morphology with spindled and epithelioid cells, genetic features, and an overall favorable outcome even if a regional lymph node is involved. Nevoid melanomas are rare and difficult to diagnose clinically and histologically. They can arise in late adolescence. Their prognosis is currently not very well ascertained. A small group of melanomas remains unclassified after histological and molecular assessment.

Laser assisted synthesis of WS2 nanorods by pulsed laser ablation in liquid environment

Two dimensional (2D) materials are widely attracting the interest of researchers due to their unique crystal structure and diverse properties. In the present work, tungsten disulfide (WS[Formula: see text] nanorods were synthesized by a simple method of pulsed laser ablation in liquid (PLAL) environment. The prepared WS2 are analyzed by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), UV-visible spectroscopy (UV-vis) and Raman spectroscopy to confirm the surface morphology, phase and structure. A possible growth mechanism of WS2 is proposed. This study indicates new door for the preparation of 2D materials with specific morphology.

State-of-the-art progress in tracking plasmon-mediated photoredox catalysis

Metal nanocrystals (NCs), particularly for plasmonic metal NCs with specific morphology and size, can strongly interact with ultraviolet-visible or even near-infrared photons to generate energetic charge carriers, localized heating, and electric field enhancement. These unique properties offer a promising opportunity for maneuvering solar-to-chemical energy conversion through different mechanisms. As distinct from previous works, in this review, recent advances of various characterization techniques in probing and monitoring the photophysical/photochemical processes, as well as the reaction mechanisms of plasmon-mediated photoredox catalysis are thoroughly summarized. Understanding how to distinguish and track these reaction mechanisms would furnish basic guidelines to design next-generation photocatalysts for plasmon-enhanced catalysis.