Synergetic Fermentation of Glucose and Glycerol for High-Yield N-Acetylglucosamine Production in Escherichia coli

N-acetylglucosamine (GlcNAc) is an amino sugar that has been widely used in the nutraceutical and pharmaceutical industries. Recently, microbial production of GlcNAc has been developed. One major challenge for efficient biosynthesis of GlcNAc is to achieve appropriate carbon flux distribution between growth and production. Here, a synergistic substrate co-utilization strategy was used to address this challenge. Specifically, glycerol was utilized to support cell growth and generate glutamine and acetyl-CoA, which are amino and acetyl donors, respectively, for GlcNAc biosynthesis, while glucose was retained for GlcNAc production. Thanks to deletion of the 6-phosphofructokinase (PfkA and PfkB) and glucose-6-phosphate dehydrogenase (ZWF) genes, the main glucose catabolism pathways of Escherichia coli were blocked. The resultant mutant showed a severe defect in glucose consumption. Then, the GlcNAc production module containing glucosamine-6-phosphate synthase (GlmS*), glucosamine-6-phosphate N-acetyltransferase (GNA1*) and GlcNAc-6-phosphate phosphatase (YqaB) expression cassettes was introduced into the mutant, to drive the carbon flux from glucose to GlcNAc. Furthermore, co-utilization of glucose and glycerol was achieved by overexpression of glycerol kinase (GlpK) gene. Using the optimized fermentation medium, the final strain produced GlcNAc with a high stoichiometric yield of 0.64 mol/mol glucose. This study offers a promising strategy to address the challenge of distributing carbon flux in GlcNAc production.

Dual regulation of lipid droplet-triacylglycerol metabolism and ERG9 expression for improved β-carotene production in Saccharomyces cerevisiae

Background The limitation of storage space, product cytotoxicity and the competition for precursor are the major challenges for efficiently overproducing carotenoid in engineered non-carotenogenic microorganisms. In this work, to improve β-carotene accumulation in Saccharomyces cerevisiae, a strategy that simultaneous increases cell storage capability and strengthens metabolic flux to carotenoid pathway was developed using exogenous oleic acid (OA) combined with metabolic engineering approaches. Results The direct separation of lipid droplets (LDs), quantitative analysis and genes disruption trial indicated that LDs are major storage locations of β-carotene in S. cerevisiae. However, due to the competition for precursor between β-carotene and LDs-triacylglycerol biosynthesis, enlarging storage space by engineering LDs related genes has minor promotion on β-carotene accumulation. Adding 2 mM OA significantly improved LDs-triacylglycerol metabolism and resulted in 36.4% increase in β-carotene content. The transcriptome analysis was adopted to mine OA-repressible promoters and IZH1 promoter was used to replace native ERG9 promoter to dynamically down-regulate ERG9 expression, which diverted the metabolic flux to β-carotene pathway and achieved additional 31.7% increase in β-carotene content without adversely affecting cell growth. By inducing an extra constitutive β-carotene synthesis pathway for further conversion precursor farnesol to β-carotene, the final strain produced 11.4 mg/g DCW and 142 mg/L of β-carotene, which is 107.3% and 49.5% increase respectively over the parent strain. Conclusions This strategy can be applied in the overproduction of other heterogeneous FPP-derived hydrophobic compounds with similar synthesis and storage mechanisms in S. cerevisiae. Graphical Abstract

Dual Regulation of Lipid Droplet-triacylglycerol Metabolism and ERG9 Expression for Improved β-carotene Production in Saccharomyces Cerevisiae

BackgroundThe limitation of storage space, product cytotoxicity and the competition for precursor is the major challenges for efficiently overproducing carotenoid in engineered non-carotenogenic microorganisms. In this work, to improve β-carotene accumulation in Saccharomyces cerevisiae, a strategy that simultaneous increases cell storage capability and strengthens metabolic flux to carotenoid pathway was developed using exogenous oleic acid (OA) combined with metabolic engineering approaches.ResultsThe direct separation of lipid droplets (LDs), quantitative analysis and genes disruption trial indicated that LDs are major storage locations of β-carotene in S. cerevisiae. However, due to the competition for precursor between β-carotene and LDs-triacylglycerol biosynthesis, enlarging storage space by engineering LDs related genes has minor promotion on β-carotene accumulation. Adding 2 mM OA significantly improved LDs-triacylglycerol metabolism and resulted in 36.4% increase in β-carotene content. The transcriptome analysis was adopted to mine OA-repressible promoters and IZH1 promoter was used to replace native ERG9 promoter to dynamically down-regulate ERG9 expression, which diverted the metabolic flux to β-carotene pathway and achieved additional 31.7% increase in β-carotene content without adversely affecting cell growth. By inducing an extra constitutive β-carotene synthesis pathway for further conversion precursor farnesol to β-carotene, the final strain produced 11.4 mg/DCW and 142 mg/L of β-carotene, which is 107.3% and 49.5% increase respectively over the parent strain. ConclusionsThis strategy can be applied in the overproduction of other heterogeneous FPP-derived hydrophobic compounds with similar synthesis and storage mechanisms in S. cerevisiae.

Constitutive Modelling of Polylactic Acid at Large Deformation Using Multiaxial Strains

Sheet specimens of a PLLA-based polymer have been extended at a temperature near to the glass transition in both uniaxial and planar tension, with stress relaxation observed for some time after reaching the final strain. Both axial and transverse stresses were recorded in the planar experiments. In all cases during loading, yielding at small strain was followed by a drop in true stress and then strain hardening. This was followed by stress relaxation at constant strain, during which stress dropped to reach an effectively constant level. Stresses were modelled as steady state and transient components. Steady-state components were identified with the long-term stress in stress relaxation and associated with an elastic component of the model. Transient stresses were modelled using Eyring mechanisms. The greater part of the stress during strain hardening was associated with dissipative Eyring processes. The model was successful in predicting stresses in both uniaxial and planar extension over a limited range of strain rate.

Reconstruction of the Diaminopimelic Acid Pathway to Promote L-lysine Production in Corynebacterium glutamicum

The dehydrogenase pathway and the succinylase pathway are involved in the synthesis of L-lysine in Corynebacterium glutamicum. Despite the low contribution rate to L-lysine production, the dehydrogenase pathway is favorable for its simple steps and potential to increase the production of L-lysine. The effect of ammonium (NH4+) concentration on L-lysine biosynthesis was investigated, and the results indicated that the biosynthesis of L-lysine can be promoted in a high NH4+ environment. In order to reduce the requirement of NH4+, the nitrogen source regulatory protein AmtR was knocked out, resulting in an 8.5% increase in L-lysine production (i.e., 52.3 ± 4.31 g/L). Subsequently, the dehydrogenase pathway was upregulated by blocking or weakening the tetrahydrodipicolinate succinylase (DapD)-coding gene dapD and overexpressing the ddh gene to further enhance L-lysine biosynthesis. The final strain XQ-5-W4 could produce 189 ± 8.7 g/L L-lysine with the maximum specific rate (qLys,max.) of 0.35 ± 0.05 g/(g·h) in a 5-L jar fermenter. The L-lysine titer and qLys,max achieved in this study is about 25.2% and 59.1% higher than that of the original strain without enhancement of dehydrogenase pathway, respectively. The results indicated that the dehydrogenase pathway could serve as a breakthrough point to reconstruct the diaminopimelic acid (DAP) pathway and promote L-lysine production.

Reconstruction of the Diaminopimelic Acid Pathway to Promote L-lysine Production in Corynebacterium Glutamicum

Background: The dehydrogenase pathway and the succinylase pathway are involved in the synthesis of L-lysine in Corynebacterium glutamicum. Despite the low contribution rate to L-lysine production, the dehydrogenase pathway is favorable for its simple steps and great potentials to increase the production of L-lysine. Results: The aim of this work is to enhance the carbon flux in dehydrogenase pathway to promote L-lysine production. Firstly, the effect of ammonium (NH4+) concentration on L-lysine biosynthesis was investigated, and the results indicated that the biosynthesis of L-lysine can be promoted in high NH4+ environment. In order to reduce the requirement of NH4+, the nitrogen source regulatory protein AmtR was knocked out, resulting in an 8.5% increase in L-lysine production (i.e., 52.3±4.31 g/L). Subsequently, the dehydrogenase pathway was upregulated by blocking or weakening tetrahydrodipicolinate succinylase (DapD)-coding gene dapD and overexpressing the ddh gene to further enhance L-lysine biosynthesis. The final strain XQ-5-W4 could produce 189±8.7 g/L L-lysine with the maximum specific rate (qLys,max.) of 0.35±0.05 g/(g·h) in a 5-L jar fermenter. Conclusions: The L-lysine titer and qLys,max achieved in this study is about 25.2% and 59.1% higher than that of the original strain without enhancement of dehydrogenase pathway, respectively. The results indicated that the dehydrogenase pathway could serve as a breakthrough point to reconstruct the diaminopimelic acid (DAP) pathway and promote L-lysine production.

Optimization of tetramycin production in Streptomyces ahygroscopicus S91

Background Tetramycin is a 26-member tetraene antibiotic used in agriculture. It has two components, tetramycin A and tetramycin B. Tetramycin B is obtained by the hydroxylation of tetramycin A on C4. This reaction is catalyzed by the cytochrome P450 monooxygenase TtmD. The two components of tetramycin have different antifungal activities against different pathogenic fungi. Therefore, the respective construction of high-yield strains of tetramycin A and tetramycin B is conducive to more targeted action on pathomycete and has a certain practical value. Results Streptomyces ahygroscopicus S91 was used as the original strain to construct tetramycin A high-yield strains by blocking the precursor competitive biosynthetic gene cluster, disrupting tetramycin B biosynthesis, and overexpressing the tetramycin pathway regulator. Eventually, the yield of tetramycin A in the final strain was up to 1090.49 ± 136.65 mg·L− 1. Subsequently, TtmD, which catalyzes the conversion from tetramycin A to tetramycin B, was overexpressed. Strains with 2, 3, and 4 copies of ttmD were constructed. The three strains had different drops in tetramycin A yield, with increases in tetramycin B. The strain with three copies of ttmD showed the most significant change in the ratio of the two components. Conclusions A tetramycin A single-component producing strain was obtained, and the production of tetramycin A increased 236.84% ± 38.96% compared with the original strain. In addition, the content of tetramycin B in a high-yield strain with three copies of ttmD increased from 26.64% ± 1.97 to 51.63% ± 2.06%.

ATP and NADPH engineering of Escherichia coli to improve the production of 4-hydroxyphenylacetic acid using CRISPRi

Background 4-Hydroxyphenylacetic acid (4HPAA) is an important raw material for the synthesis of drugs, pesticides and biochemicals. Microbial biotechnology would be an attractive approach for 4HPAA production, and cofactors play an important role in biosynthesis. Results We developed a novel strategy called cofactor engineering based on clustered regularly interspaced short palindromic repeat interference (CRISPRi) screening (CECRiS) for improving NADPH and/or ATP availability, enhancing the production of 4HPAA. All NADPH-consuming and ATP-consuming enzyme-encoding genes of E. coli were repressed through CRISPRi. After CRISPRi screening, 6 NADPH-consuming and 19 ATP-consuming enzyme-encoding genes were identified. The deletion of the NADPH-consuming enzyme-encoding gene yahK and the ATP-consuming enzyme-encoding gene fecE increased the production of 4HPAA from 6.32 to 7.76 g/L. Automatically downregulating the expression of the pabA gene using the Esa-PesaS quorum-sensing-repressing system further improved the production of 4HPAA. The final strain E. coli 4HPAA-∆yfp produced 28.57 g/L of 4HPAA with a yield of 27.64% (mol/mol) in 2-L bioreactor fed-batch fermentations. The titer and yield are the highest values to date. Conclusion This CECRiS strategy will be useful in engineering microorganisms for the high-level production of bioproducts.

Initiation of Dynamic Recrystallization of As-Cast N08028 Alloy

The use of high nickel content austenitic stainless steels (SASS) has significantly increased in the last decade. The corrosion and high fatigue resistance of these materials make them suitable for manufacturing oil country tubular goods (OCTG). SASS are processing by forging from casting conditions. Dynamic recovery (DRV) and recrystallization (DRX) of as-cast super austenitic stainless steel, N08028 Alloy, is investigated to study the refining effect from the as-cast grain structure to fully recrystallized austenite due to hot deformation. Both the critical stress and strain for the initiation of DRX are determined using the flow curves. To perform this analysis, hot compression tests are performed at temperatures between 900°C and 1250°C, and strain rates between 0.1 s-1 and 10 s-1, up to 0,8 final strain using a Gleeble®3800 thermomechanical simulator. Subsequently, the Johnson-Avrami-Mehl-Kolmogorow (JMAK) model is used to numerically fit the flow curves and consequently determine the critical strain. No critical points are seen for temperatures under 1100°C. Above this temperature, the JMAK model proves to be valid in all studied strain rates.

Room Temperature Creep of a Tin-Lead Solder Wire under Self-Weight

Creep tests using a simple jig have been performed on 63 wt.% tin-37 wt.% lead solder wires of diameters 1 mm and 2 mm at room temperature (23°C). Coils containing 5 or 10 rings were allowed to creep under their own weight for 60 minutes. It was noted that for either of these diameter wires, the coil with 10 rings had significantly large vertical displacements as compared to those with 5 rings. In each particular coil, the highest vertical displacements were in the bottom rings. The overall maximum vertical displacement was 76.5 mm and this was in a bottom ring of the 2 mm diameter wire with 10 rings. However, in all cases, the amount of horizontal displacement was negligible. The bottom ring of the 2 mm diameter wire had the largest initial strain of 0.151 at 5 minutes and final strain of 0.546 at 60 minutes; this was in the coil with 10 rings. Although no consistent pattern in change between the initial and final diameters was noted for the rings in any coil even after 24 hours of creep, it was quite apparent that in a majority of cases a change in diameter occurred. The main factor responsible for the observed creep is attributed to the weight of the rings in the coils rather than capillary flow.