Microplastic extraction protocols can impact the polymer structure

Although microplastics are ubiquitous in today’s natural environments, our understanding of the materials, quantities, and particle sizes involved remains limited. The recovery of microplastics from different types of environmental matrices requires standardized matrix digestion protocols that allow inter-laboratory comparisons and that have no effect on the polymers themselves. A number of commonly used digestion methods rely on oxidation with concentrated hydrogen peroxide solutions to remove organic matter from the matrix. However, this can alter the nature of polymers through hydrolysis and often does not lead to a complete matrix removal. We have therefore investigated the use of two altered matrix digestion protocols, an acidic (Fenton) protocol and a new alkaline (Basic Piranha) protocol, focusing mainly on the effect on biodegradable polymers (polylactide, polybutylene adipate terephthalate, polybutylene succinate) and polymers with known degradation pathways via hydrolysis (thermoplastic polyurethanes, polyamide). Comparing the initial surface textures, chemical compositions, and particle size distributions with those obtained after digestion revealed that the Fenton protocol left most of the polymers unchanged. The ferrous residue that remains following Fenton digestion had no effect on either the polymer composition or the particle size distribution, but could disturb further analytics (e.g. Raman microscopy due to auto-fluorescence). While increasing the chance of complete matrix removal, the more powerful Basic Piranha protocol is also more likely to affect the polymer properties: Polylactide polymers in particular showed signs of degradation under alkaline digestion (reduced polylactide content, holes in the polymer matrix), indicating the unsuitability of the Basic Piranha protocol in this specific case. Polyamide, however, remained stable during the Basic Piranha treatment, and the surface chemistry, the particle size as well as the molar mass distribution of the investigated thermoplastic polyurethanes were also not affected. Hence, this protocol offers a powerful alternative for microplastic analysis with focus on particle size in more complex environmental matrices (e.g. removal of cellulose in soil), while avoiding ferrous Fenton residue. Unexpectedly, also tire rubber, a frequent target analyte in microplastic monitoring, was found to be susceptible to artefact structures by both oxidation protocols. In summary, controls for the specific combination of polymer and sample preparation protocol are highly recommended to select the most fitting protocol. Here selected suitable combinations are reported.

Efficient Matrix Cleanup of Soft-Gel-Type Dietary Supplements for Rapid Screening of 92 Illegal Adulterants Using EMR-Lipid dSPE and UHPLC-Q/TOF-MS

An efficient matrix cleanup method was developed for the rapid screening of 92 illegal adulterants (25 erectile dysfunction drugs, 15 steroids, seven anabolic steroids, 12 antihistamines, 12 nonsteroidal anti-inflammatory drugs (NSAIDs), four diuretics, and 17 weight-loss drugs) in soft-gel-type supplements by ultra-high performance liquid chromatography-quadrupole/time of flight-mass spectrometry (UHPLC-Q/TOF-MS). As representative green chemistry methods, three sample preparation methods (dispersive liquid-liquid microextraction (DLLME), “quick, easy, cheap, effective, rugged, and safe” dispersive solid-phase extraction (QuEChERS-dSPE), and enhanced matrix removal-lipid (EMR-Lipid) dSPE) were evaluated for matrix removal efficiency, recovery rate, and matrix effect. In this study, EMR-Lipid dSPE was shown to effectively remove complicated matrix contents in soft-gels, compared to DLLME and QuEChERS-dSPE. For the rapid screening of a wide range of adulterants, extracted common ion chromatogram (ECIC) and neutral loss scan (NLS) based on specific common MS/MS fragments were applied to randomly collected soft-gel-type dietary supplement samples using UHPLC-Q/TOF-MS. Both ECICs and NLSs enabled rapid and simple screening of multi-class adulterants and could be an alternative to the multiple reaction monitoring (MRM) method. The developed method was validated in terms of limit of detection (LOD), precision, accuracy, recovery, and matrix effects. The range of LODs was 0.1–16 ng/g. The overall precision values were within 0.09–14.65%. The accuracy ranged from 81.6% to 116.6%. The recoveries and matrix effects of 92 illegal adulterants ranged within 16.9–119.4% and 69.8–114.8%, respectively. The established method was successfully applied to screen and identify 92 illegal adulterants in soft-gels. This method can be a promising tool for the high-throughput screening of various adulterants in dietary supplements and could be used as a more environmentally friendly routine analytical method for screening dietary supplements illegally adulterated with multi-class drug substances.

Mixed mode monolithic sorbent in pipette tip for extraction of ractopamine and clenbuterol prior to analysis by HPLC-UV and UHPLC-Q ExactiveTM Plus Orbitrap MS

This work developed a fast and simple method for the quantification of two important β-agonists, ractopamine (RAC) and clenbuterol (CLEN) in animal urines. The method was based on micro-extraction by a mixed mode monolithic material and analysis by HPLC-UV and UHPLC-Q ExactiveTM Plus Orbitrap mass spectrometer. A mixed functional monolith with nonpolar ester-based structure containing polar carboxylic groups was thermally synthesized in situ in the pipette tips. The material combines both hydrophobic and ionic interactions. Parameters including conditions and composition of reagents for the in-pipette tip monolith synthesis, as well as the extraction process, were investigated and optimized. The procedure for extraction is 800 μL washing solvent of 10:90 (v/v) ACN:water and 150 μL eluting solvent of 30:70 (v/v) ACN:200 mM acetate buffer pH 4.0. Extraction efficiencies of 92% and 100% for RAC and CLEN, respectively, were achieved within 5 min with total organic solvent consumption of 395 μL. The extracts of spiked cattle and swine urines were analyzed by HPLC-UV and UHPLC-Q ExactiveTM Plus Orbitrap mass spectrometer. Good recovery with acceptable precision was observed. The mass spectrometry data confirmed efficient matrix removal by the synthesized extraction sorbent allowing routine analysis by the HPLC-UV method.

An Optimized Extraction Procedure for Determining Acaricide Residues in Foundation Sheets of Beeswax by Using Gas Chromatography-Mass Spectrometry

Pesticides can be found in beehives for several reasons, including contamination from surrounding cultivars; yet one of the most pertinent is related to the fact that beekeepers employ acaricides to control various types of mites, which may accumulate in beeswax due to their lipophilic nature. In the present study, foundation sheets of different origins, collected over a period of three years, were analyzed to detect the residues of seven acaricides (atrazine, chlorpyrifos, chlorfenvinphos, alpha-endosulfan, bromopropylate, coumaphos, tau-fluvalinate) by gas chromatography with mass spectrometric detection. An efficient sample treatment (recoveries between 90% and 108%) is proposed, involving solvent extraction with 1% acetic acid in acetonitrile mixture followed by dispersive solid-phase extraction (enhanced matrix removal lipid) and a polishing step. An evaluation was made of the analytical performance of the proposed method. It was shown to be selective, linear from a limit of quantification to 5000 µg/kg, precise (relative standard deviation values were below 6%), and with a goo sensitivity (limit of quantification ranging from 5 to 10 µg/kg). Finally, results showed that a large majority of the sheets analyzed (>90%) contained residues of at least one of these compounds. Coumaphos and tau-fluvalinate residues were the most common, with chlorpyrifos and chlorfenvinphos detected to a lesser extent.