The Orange Peel: An Outstanding Source of Chemical Resources

Citrus sinensis (L.) Osbeck is a very common cultivar belonging to the Rutaceae family. It is largely diffused in several areas of the world characterized by mild to warm climate conditions. Its abundant worldwide production (up to 107 Tons. per year) and consumption both as the edible part of the fruit and as several types of derivative products imply the production of a huge amount of waste, such as the fruit pomace. Several ways of recycling this material have been developed in recent years: employment as fertilizer, fodder ingredient, and even cloth material. However, the chemical added value of Citrus sinensis peel has been underestimated despite the diversified and significant content of useful chemicals, such as polyphenols, polymethoxylated phenols, glycosylated flavonoids, volatile and non-volatile terpenoids, pectins, enzymes, etc. This work aims to highlight the outstanding chemical potential of Citrus sinensis peel.

Effect of modified pomace on copper migration via riverbank soil in southwest China

To explore the effects of modified pomace on copper migration via the soil on the banks of the rivers in northern Sichuan and Chongqing, fruit pomace (P) and ethylene diamine tetra-acetic acid (EDTA) modified P (EP) were evenly added (1% mass ratio) to the soil samples of Guanyuan, Nanbu, Jialing, and Hechuan from the Jialing River; Mianyang and Suining from the Fu River; and Guangan and Dazhou from the Qu River. The geochemical characteristics and migration rules of copper in different amended soils were simulated by column experiment. Results showed that the permeation time of copper in each soil column was categorized as EP-amended > P-amended > original soil, and the permeation time of amended soil samples at different locations was Jialing > Suining > Mianyang > Guangan > Dazhou > Nanbu > Guanyuan > Hechuan. Meanwhile, the average flow rate of copper in each soil column showed a reverse trend with the permeation time. Copper in exchangeable, carbonate, and iron–manganese oxide forms decreased with the increase of vertical depth in the soil column, among which the most evident decreases appeared in the carbonate-bonding form. The copper accumulation in different locations presented a trend of Jialing > Suining > Mianyang > Guangan > Dazhou > Nanbu > Guangyuan > Hechuan, and the copper content under the same soil showed EP-amended > P-amended > original soil. The copper proportion of the carbonate form was the highest in each soil sample, followed by the exchangeable form. The proportions of iron-manganese oxide and organic matter forms were relatively small. A significant correlation was observed between the cation exchange capacity and the copper content in exchangeable and carbonate forms. Moreover, total organic carbon and copper contents were negatively correlated.

A Structured Approach to Recover Valuable Compounds from Agri-food Side Streams

Food side streams contain useful compounds such as proteins, sugars, polyphenols, and amino acids that might get discarded during processing. The concentration of these components may be low (e.g., fruit side streams are mainly composed by water, around 90%, while polyphenol content in rapeseed meal is less than 3% dry weight) and therefore effective separation techniques should be evaluated. The aim of this review is to identify the different process steps (like pretreatment, volume reduction, phase change, solid removal, purification, and formulation) required to recover high-value products from agri-food residues. It reviews different plant-based byproducts as sources (cereal bran, fruit pomace, oilseed meals, fruit wastewater) of valuable compounds and discusses the relevant technologies required for processing (such as extraction, adsorption, crystallization, drying, among others). A structured approach to design recovery processes presented focused on high purity products. This work demonstrates that multiple high-value products can be recovered from a single agri-food side stream depending on the processing steps and the origin source (strong and soft structures and wastewater).

Biowaste as a Potential Source of Bioactive Compounds—A Case Study of Raspberry Fruit Pomace

Raspberry fruit pomace, a byproduct of juice production, was studied as a potential source of antioxidant compounds. Target high-performance liquid chromatography analysis of important polyphenolic compounds (gallic, p-coumaric, caffeic, quercitrin, chlorogenic, and ellagic acid) was performed together with analysis of total phenolic content (TPC), total flavonoid content (TFC), total anthocyanins content (TAC), and antioxidant capacity (via ferric reducing antioxidant power (FRAP) and 1,1-diphenyl-2-picrylhydrazyl (DPPH) assays). The differences in polyphenolic content of Rubus idaeus L. pomace were evaluated following ultrasound-assisted extraction and conventional maceration with different organic solvents. Additionally, the yield of free phenolics was measured in hydrolyzed pomace extracts. The results obtained show that the ultrasound method maximizes the quantity of antioxidant compounds in terms of TPC (27.79 mg/L gallic acid equivalent (GAE)), TFC (8.02 mg/g quercetin equivalent (QE)), TAC (7.13 mg/L cyanidine-3-glucoside equivalent (C3G Eq)), caffeic (19.17 µg/g), chlorogenic (3.56 µg/g), ellagic (105.52 µg/g), and gallic acids (8.75 µg/g), as well as FRAP (1002.72 µmol/L) and DPPH assays (969.71 µmol/mL vitamin C equivalent (vit C Eq); 567.00 µmol/100 g Trolox equivalent (TE)). On the other hand, conventional maceration maximizes the yield of quercetin and p-coumaric acid. In terms of biowaste valorization, raspberry fruit pomace has a promising industrial potential and may prove to be useful in the development of antioxidant dietary supplements.

Properties of Biocomposites from Rapeseed Meal, Fruit Pomace and Microcrystalline Cellulose Made by Press Pressing: Mechanical and Physicochemical Characteristics

This paper presents the results of research on biocomposites made of the mixture of post-extraction rapeseed meal, microcrystalline cellulose and various fruit pomace (chokeberry, blackcurrant, apple and raspberry pomace). The biocomposites were made in the process of mechanical thickening by means of a heated mould (die and stamp) which is located between two heating elements installed on a hydraulic press. The presented research combines mechanical engineering and material engineering issues. The physical and mechanical tests of obtained biocomposites included mechanical strength measurements, thermogravimetric analyses (TGA), colour change tests and scanning electron microscopic (SEM) tests of the internal structure after breaking the sample. In addition, Fourier transform infrared spectroscopy (FTIR) tests were carried out. Generally, the bend tests and Young’s modulus were significantly increased, for example, biocomposites with an addition of chokeberry pomace had the flexural strength higher by approximately 25% in relation to the primary sample. Furthermore, it is interesting to note the increase of water contact angle of these biocomposites by 40% in relation to the primary sample. The research indicates the potential for using fruit pomace for the needs of biocomposite production.