A Novel Dye-Sensitized Solar Cell Structure Based on Metal Photoanode without FTO/ITO

Traditional dye-sensitized solar cells (DSSC) use FTO/ITO containing expensive rare elements as electrodes, which are difficult to meet the requirements of flexibility. A new type of flexible DSSC structure with all-metal electrodes without rare elements is proposed in this paper. Firstly, a light-receiving layer was prepared outside the metal photoanode with small holes to realize the continuous oxidation-reduction reaction in the electrolyte; Secondly, the processing technology of the porous titanium dioxide (TiO2) film was analyzed. By testing the J–V characteristics, it was found that the performance is better when the heating rate is slow. Finally, the effects of different electrode material combinations were compared through experiments. Our results imply that in the case of all stainless-steel electrodes, the open-circuit voltage can reach 0.73 V, and in the case of a titanium photoanode, the photoelectric conversion efficiency can reach 3.86%.

Cross-Scale Synthesis of Organic High-k Semiconductors Based on Spiro-Gridized Nanopolymers

High dielectric constants in organic semiconductors have been identified as a central challenge for the improvement in not only piezoelectric, pyroelectric, and ferroelectric effects but also photoelectric conversion efficiency in OPVs, carrier mobility in OFETs, and charge density in charge-trapping memories. Herein, we report an ultralong persistence length (lp≈41 nm) effect of spiro-fused organic nanopolymers on dielectric properties, together with excitonic and charge carrier behaviors. The state-of-the-art nanopolymers, namely, nanopolyspirogrids (NPSGs), are synthesized via the simple cross-scale Friedel-Crafts polygridization of A2B2-type nanomonomers. The high dielectric constant (k=8.43) of NPSG is firstly achieved by locking spiro-polygridization effect that results in the enhancement of dipole polarization. When doping into a polystyrene-based dielectric layer, such a high-k feature of NPSG increases the field-effect carrier mobility from 0.20 to 0.90 cm2 V-1 s-1 in pentacene OFET devices. Meanwhile, amorphous NPSG film exhibits an ultralow energy disorder (<50 meV) for an excellent zero-field hole mobility of 3.94×10−3 cm2 V−1 s−1, surpassing most of the amorphous π-conjugated polymers. Organic nanopolymers with high dielectric constants open a new way to break through the bottleneck of efficiency and multifunctionality in the blueprint of the fourth-generation semiconductors.

High throughput screening of promising lead-free inorganic halide double perovskites via first-principles calculations

Perovskite solar cells (PSCs) have been intensively investigated and made great progress due to their high photoelectric conversion efficiency and low production cost. However, poor stability and the toxicity of...

Influence of molar ratio of MAI and PbI2 on synthesis of perovskite film

This study explores the influence of molar ratio of the synthetic solution of methylammonium iodide (MAI) and PbI2 on perovskite solar cells. The complete perovskite crystals must be produced in a low-humidity environment. The substrate is spin-coated in the adjusted MAPbI3 synthesis solution and annealed by using a nitrogen furnace tube to form perovskite crystals. During the crystallization of MAPbI3, some of the PbI2 remains, which improves the efficiency of the perovskite solar cell. Therefore, we adjust the molar concentration of MAI to find the appropriate amount of the PbI2 residual. We fix the MAI molar concentration at 1 M and adjust the PbI2 molar concentration from 0.8 M to 1.4 M. The molar ratios of MAI and PbI2 are, then, 1:0.8, 1:1, 1:1.2, and 1:1.4, respectively. Then, we use UV–vis, FE-SEM, and photoelectric conversion efficiency (PCE) measurements for comparing the growth of perovskite crystals and their photoelectric characteristics. The results show that 1.2 M of PbI2 is the most appropriate concentration for perovskite solar cells among the adjusted concentrations.

Accurate Analysis of Anisotropic Carrier Mobility and Structure–property Relationships in Organic BOXD Crystalline Materials

Charge mobility is an essential factor of organic crystalline materials. Although many investigators have made important progress, the exact relationship between the crystal structure and carrier mobility remains to be clarified. Fortunately, a series of bis-1,3,4-oxadiazole derivatives have been successfully prepared and reported. They have similar main molecular fragments but different crystal packing modes, which provide an ideal research objective for studying the effect of molecular packing on charge mobility in organic photoelectric conversion systems. In this work, the charge mobilities of these molecules are systematically evaluated from the perspective of first-principles calculation, and the effect of a molecular overlap on orbital overlap integral and final charge carrier mobility is fully discussed. It can be seen that the small intermolecular distance (less than 6 Å) is the decisive factor to achieve high electron mobility in π stacking, and better mobility can be obtained by increasing the hole migration distance appropriately. A larger dihedral angle of anisotropy is an important point limiting the charge mobility in the herringbone arrangement. It is hoped that the correlation results between the crystal structure and mobility can assist the experimental study and provide an effective way to improve the photoelectric conversion efficiency of the organic semiconductor devices and multiple basis for multiscale material system characterization and material information.

Exploring the growth of MAPbI3 under different preparation methods for mesoporous perovskite solar cells

The control of the perovskite growth morphology plays an extremely critical role in mesoporous perovskite solar cells. In this paper, anatase TiO2 nanoparticles (NPs) with high crystallinity were synthesized by a hydrothermal method, and the thickness of the TiO2 mesoporous film (TiO2-MT) was adjusted with concentration of TiO2-NP slurry by controlling ethanol. The perovskite layers were prepared by the traditional two-step (TTS) method, and the improved two-step (ITS) method was used. It is proved that different preparation processes of the perovskite light-absorbing layers have a certain influence on the photoelectric performance of the cell device, but also, the thickness of the TiO2mesoporous film affects the electron transport efficiency at the TiO2/MAPbI3 interface and the suppression of electron–hole recombination through [Formula: see text]–[Formula: see text] positive and negative scanning, electrochemical impedance spectroscopy (EIS) and dark state [Formula: see text]–[Formula: see text] curve analysis of the device. By optimizing the thickness of the TiO2 mesoporous film, the short-circuit photocurrent density ([Formula: see text] of mesoporous perovskite solar cells (M-PSCs) based on the TiO2 mesoporous electron transporting layer of 400 nm thickness is 23.85 mA/cm2, and the optimal photoelectric conversion efficiency (PCE) is 15.38%.

Effect of Polarization on Performance of Inverted Solar Cells Based on Molecular Ferroelectric 1,6-Hexanediamine Pentaiodide Bismuth with PCBM as Electron Transport Layer

The depolarization field of ferroelectric photovoltaic materials can enhance the separation and transport of photogenerated carriers, which will improve the performance of photovoltaic devices, thus attracting the attention of researchers. In this paper, a narrow bandgap molecular ferroelectric Hexane-1,6-diammonium pentaiodobismuth (HDA-BiI5) was selected as the photo absorption layer for the fabrication of solar cells. After optimizing the ferroelectric thin film by the antisolvent process, the effect of different polarization voltages on the performance of ferroelectric devices was studied. The results showed that there was a significant increase in short-circuit current density, and the photoelectric conversion efficiency showed an overall increasing trend. Finally, we analyzed the internal mechanism of the effect of polarization on the device.

Au Nanoparticles Effect on Inverted ZnO Nanorods/Organic Hybrid Solar Cell Performance

The sun provides a plentiful and inexpensive source of carbon-neutral energy that has yet to be fully utilized. This is a major driving force behind the development of organic photovoltaic (OPV) materials and devices, which are expected to offer benefits such as low cost, flexibility, and widespread availability. For the photovoltaic performance enhancement of the inverted ZnO-nanorods (NR)/organic hybrid solar cells with poly(3-exylthiophene):(6,6)-phenyl-C61-butyric-acid-methylester (P3HT:PCBM) and poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) (PEDOT:PSS) active layers, gold nanoparticles (Au-NPs) were introduced into the interface between indium-thin-oxide cathode layer and ZnO cathode buffer layer, and the efficiency improvement was observed. It's worth noting that adding Au NPs had both a positive and negative impact on device performance. Au NPs were shown to be advantageous to localized surface plasmon resonance (LSPs) in the coupling of dispersed light from ZnO NRs in order to extend the light's path length in the absorbing medium. Although the light absorption in the active layer could be enhanced, Au NPs might also act as recombination centers within the active layer. To avoid this adverse effect, Au NPs are covered by the ZnO seeded layer to prevent Au NPs from direct contact with the active layer. The dominant surface plasmonic effect of Au NPs increased the photoelectric conversion efficiency from 2.4% to 3.8%.

Anticorrosion Protection of TiO2 Nanofilm on the Surface of Carbon Steel

Carbon steel (CS) is the preferred base material for construction in various industries due to its low cost; however, industrial equipment failure caused by carbon steel corrosion can lead to several environmental risks and safety hazards, thus limiting its application scenarios. Enhancing the corrosion resistance of carbon steel and reducing the maintenance cost of carbon steel substrate have become a hot topic of current research. Therefore, in this study, a zinc oxide/polyaniline-titanium dioxide composite film (ZnO/PAni-TiO2) with long-lasting photogenerated cathodic protection was constructed based on the photoelectric conversion properties of TiO2. This new TiO2 composite film, which can avoid photogenerated electron–hole complexation, significantly enhanced the photoelectric conversion efficiency of TiO2, thereby decreasing the anodic corrosion current density of low carbon steel and enhancing the cathodic protection of carbon steel. Hence, it is expected to provide a new direction for the preparation of corrosion-resistant TiO2-laminated carbon steel nanofilms.

Preparation of ZnO/Bi2O3 Composites as Heterogeneous Thin Film Materials with High Photoelectric Performance on FTO Base

In recent years, ZnO nanomaterials have achieved great performance in solar energy applications. How to synthesize a ZnO nanocomposite structure with high photoelectric conversion efficiency has become an urgent problem to solved. In this paper, a narrow band gap bismuth trioxide (Bi2O3) coated on a ZnO nanoarray by magnetron sputtering was used to prepare a composite heterojunction ZnO/Bi2O3. Studies have found that ZnO/Bi2O3 exhibits excellent photoelectric conversion performance. By preparing a composite heterostructure of ZnO/Bi2O3, it can effectively compensate for the insufficient absorption of ZnO in the visible light range and inhibit the recombination of carriers within the material. The influence of Bi2O3 thickness on the microstructure and electronic structure of the ZnO/Bi2O3 composite structure was explored and analyzed. The energy gap width of the composite heterostructure decreases with the increase in the Bi2O3 thickness on the surface of the ZnO nanorod array. At the same time, the conductive glass composite film structure is simple to prepare and is very environmentally friendly. The ZnO/Bi2O3 composite heterogeneous material prepared this time is suitable for solar cells, photodetectors, photocatalysis and other fields.