Knowledge and Safeguarding of Cultural Heritage. New Technologies for Survey and Restoration: Innovative Methods and Non-destructive Investigation

Author(s):  
Federica Bonerba ◽  
Carlo Alberto di Buono ◽  
Stefano Leonardi ◽  
Immacolata Lorè ◽  
Raffaele Piatti
Heritage ◽  
2019 ◽  
Vol 2 (3) ◽  
pp. 2053-2066
Author(s):  
Antonio Spagnuolo ◽  
Carmela Vetromile ◽  
Antonio Masiello ◽  
Maria Francesca Alberghina ◽  
Salvatore Schiavone ◽  
...  

A monitoring campaign performed on the Real Site of Carditello (found in the commune of San Tammaro, province of Caserta, Italy) was aimed to evaluate the parameters related to air quality and then to control and prevent the degradation risk. The analyses were carried out in the context of the project “Innovative methods and technologies for the conservation, valorisation and use of cultural heritage: environmental and archaeological analyses”, within the CULTURA CREA-MIBAC program, which aims to provide innovative methods for conservation and enhancement of cultural heritage through environmental and archaeometric analyses. Preliminarily, using field equipment, non-destructive investigations were carried out to identify constituent, restoration, and/or degradation materials belonging to the wall paintings on the main floor and to assess their conservation state under the current environmental conditions. Environmental monitoring was performed both outdoor (to assess the effects of atmospheric pollution and changes in the climate of the structure) and indoor the rooms of the site (to evaluate the conditions of conservation and fruition). The collected data are reported in a web platform, where one can check the real time monitoring data. The platform integrates both environmental data and information regarding the "health status" of site in order to provide a detailed analysis useful for its protection.


Author(s):  
Andrew J. Komrowski ◽  
Luis A. Curiel ◽  
Daniel J. D. Sullivan ◽  
Quang Nguyen ◽  
Lisa Logan-Willams

Abstract The acquisition of reliable Acoustic Micro Images (AMI) are an essential non-destructive step in the Failure Analysis (FA) of electronic packages. Advanced packaging and new IC materials present challenges to the collection of reliable AMI signals. The AMI is complicated due to new technologies that utilize an increasing number of interfaces in ICs and packages. We present two case studies in which it is necessary to decipher the acoustic echoes from the signals generated by the interface of interest in order to acquire trustworthy information about the IC package.


2021 ◽  
Vol 13 (4) ◽  
pp. 92
Author(s):  
Agnese Augello ◽  
Ignazio Infantino ◽  
Giovanni Pilato ◽  
Gianpaolo Vitale

This paper deals with innovative fruition modalities of cultural heritage sites. Based on two ongoing experiments, four pillars are considered, that is, User Localization, Multimodal Interaction, User Understanding and Gamification. A survey of the existing literature regarding one or more issues related to the four pillars is proposed. It aims to put in evidence the exploitation of these contributions to cultural heritage. It is discussed how a cultural site can be enriched, extended and transformed into an intelligent multimodal environment in this perspective. This new augmented environment can focus on the visitor, analyze his activity and behavior, and make his experience more satisfying, fulfilling and unique. After an in-depth overview of the existing technologies and methodologies for the fruition of cultural interest sites, the two experiments are described in detail and the authors’ vision of the future is proposed.


2021 ◽  
Vol 11 (4) ◽  
pp. 1446
Author(s):  
Jacopo Orsilli ◽  
Anna Galli ◽  
Letizia Bonizzoni ◽  
Michele Caccia

Among the possible variants of X-Ray Fluorescence (XRF), applications exploiting scanning Macro-XRF (MA-XRF) are lately widespread as they allow the visualization of the element distribution maintaining a non-destructive approach. The surface is scanned with a focused or collimated X-ray beam of millimeters or less: analyzing the emitted fluorescence radiation, also elements present below the surface contribute to the elemental distribution image obtained, due to the penetrative nature of X-rays. The importance of this method in the investigation of historical paintings is so obvious—as the elemental distribution obtained can reveal hidden sub-surface layers, including changes made by the artist, or restorations, without any damage to the object—that recently specific international conferences have been held. The present paper summarizes the advantages and limitations of using MA-XRF considering it as an imaging technique, in synergy with other hyperspectral methods, or combining it with spot investigations. The most recent applications in the cultural Heritage field are taken into account, demonstrating how obtained 2D-XRF maps can be of great help in the diagnostic applied on Cultural Heritage materials. Moreover, a pioneering analysis protocol based on the Spectral Angle Mapper (SAM) algorithm is presented, unifying the MA-XRF standard approach with punctual XRF, exploiting information from the mapped area as a database to extend the comprehension to data outside the scanned region, and working independently from the acquisition set-up. Experimental application on some reference pigment layers and a painting by Giotto are presented as validation of the proposed method.


Author(s):  
Pablo Cazenave ◽  
Katina Tiñacos ◽  
Ming Gao ◽  
Richard Kania ◽  
Rick Wang

New technologies for in-ditch non-destructive evaluation were lately developed and are becoming of mainstream use in the evaluation of external corrosion features for both In-Line-Inspection performance evaluation and pipeline integrity assessment. However, doubt was cast about the reliability and repeatability of these new technologies (hardware and processing software) when compared with those used in the traditional external-corrosion in-ditch measurement and the reliability of the pipeline integrity assessment calculations (PBurst) embedded in their software when compared with industry-wide accepted calculation methods. Therefore, the primary objective of this study is to evaluate the variation and repeatability of the measurements produced by these new technologies in corrosion feature profiling and associated PBurst calculations. Two new 3D scanning systems were used for the evaluation of two pipe samples removed from service which contain complex external corrosion features in laboratory. The reliability of the 3D scanning system in measuring corrosion profiles was evaluated against traditional profile gage data. In addition, the associated burst pressures reported by the systems were compared with results obtained using industry-widely used calculation methods. Also, consistencies, errors and gaps in results were identified. In this paper, the approach used for this study is described first, the evaluation results are then presented and finally the findings and their implications are discussed.


2014 ◽  
Vol 27 ◽  
pp. 1460135
Author(s):  
CARMEN PAVEL ◽  
FLORIN CONSTANTIN ◽  
COSMIN IOAN SUCIU ◽  
ROXANA BUGOI

X-ray Computed Tomography (CT) is a powerful non-destructive technique that can yield interesting structural information not discernible through visual examination only. This paper presents the results of the CT scans of four objects belonging to the Romanian cultural heritage attributed to the Vinča, Cucuteni and Cruceni-Belegiš cultures. The study was performed with an X-ray tomographic device developed at the Department for Applied Nuclear Physics from Horia Hulubei National Institute for Nuclear Physics and Engineering in Măgurele, Romania. This apparatus was specially designed for archaeometric studies of low-Z artifacts: ceramic, wood, bone. The tomographic investigations revealed the internal configuration of the objects and provided information about the degree to which the previous manipulations affected the archaeological items. Based on the X-ray images resulting from the CT scans, hints about the techniques used in the manufacturing of the artifacts were obtained, as well as some indications useful for conservation/restoration purposes.


Infolib ◽  
2021 ◽  
Vol 26 (2) ◽  
pp. 34-37
Author(s):  
Anna Chulyan ◽  

The article touches upon the importance of long-term digital preservation of Armenian cultural heritage through creation of digital repositories using Open-Source Software in Armenian libraries. The research highlights the advantages of Open-Source Software in context of providing free access to digital materials, as well as its high level of functionality in order to empower libraries with new technologies for more efficient organization and dissemination of information.


2013 ◽  
Vol 3 (2) ◽  
pp. 98-110 ◽  
Author(s):  
P. B. Lourenço

ABSTRACTModern societies understand built cultural heritage as a landmark of culture and diversity. Only during the last decades the idea that ancient buildings could be conserved and reused became appealing. Still, a large part of this heritage is affected by structural problems which menace the safety of buildings and people. The developments in the areas of inspection, non-destructive testing, monitoring and structural analysis of historical constructions, together with recent guidelines for reuse and conservation, allow for safer, economical and more adequate remedial measures. The paper addresses the issues of the methodology to adopt, of different cases studies and of present challenges. In particular, recent interventions in Portuguese cases studies (the Cathedral of Porto and a theological school in Braga) are analyzed in detail.Keywords: Cultural heritage buildings; Conservation and rehabilitation; Earthquakes and seismic engineering; Case studies.RESUMENLas sociedades modernas entienden su patrimonio cultural como un hito de cultura y diversidad. Sólo durante las últimas décadas la idea de que edificios antiguos podrían ser conservados y reutilizados se ha convertido en atractiva. Sin embargo, una gran parte de este patrimonio es afectado por problemas estructurales lo cual amenaza la seguridad de los edificios y personas. Los desarrollos en el área de inspección, ensayos no destructivos, seguimiento y análisis estructural de construcciones históricas, bien como recientes normas para reutilización y conservación, permiten medidas correctivas más seguras, económicas y adecuadas. El artículo aborda las metodologías adoptadas, en diferentes casos de estudio así como presentes desafíos. En particular, intervenciones recientes en casos de estudio en Portugal (Catedral de Porto y Seminario de Braga) son analizadas con detalle.Palabras Clave: Edificios de patrimonio cultural; Conservación y rehabilitación; Terremotos e ingeniería sísmica; Casos de estudio.


2020 ◽  
Vol 11 (23) ◽  
pp. 106
Author(s):  
Damiano Aiello ◽  
Cecilia Bolognesi

<p class="VARAbstract">Can we preserve cultural heritage and, consequently, the memory of the past? To answer this question, one should look at the digital revolution that the world has gone through in recent decades and analyse the complex and the dialectical relationship between cultural heritage and new technologies. Thanks to these, increasingly accurate reconstructions of archaeological sites and historical monuments are possible. The resulting digital replicas are fundamental to experience and understand cultural heritage in innovative ways: they have complex and dynamic relationships with the original objects. This research paper highlights the importance and the scientific validity of digital replicas aimed at understanding, enhancing and protecting cultural heritage. The study focuses on the virtual reconstruction of the constructive phases, from the mid-15<sup>th</sup> century to date, of one of the most emblematic Gothic-Renaissance buildings in the city of Milan (Italy): the convent of Santa Maria delle Grazie, famous worldwide for hosting Leonardo da Vinci's Last Supper painting. This site proved to be an ideal case study because of its troubled and little-known history that led to numerous changes over the centuries. Thanks to a methodological approach based on the analysis of the documentary sources and three-dimensional (3D) modelling, it was possible to outline the chronological succession of the convent transformations; the way in which these overlapped the pre-existing structures was described starting from the Renaissance harmonious and organic interventions, to finally reach 18<sup>th</sup>-19<sup>th </sup>centuries inhomogeneous and incompatible additions. Finally, the research was completed by mapping the 3D models based on the sources used and their different levels of accuracy. The 3D models have thus become a valid tool for checking and verifying the reconstruction hypotheses.</p><p class="VARAbstract">Highlights:</p><ul><li><p>The study focused on the virtual reconstruction of the convent of Santa Maria delle Grazie, one of the most emblematicGothic-Renaissance buildings in the city of Milan.</p></li><li><p>By combining data from documentary sources, architectural treatises, period photos and digital survey, the mainbuilding phases of the convent, from the 15th century to date, were digitally reconstructed.</p></li><li><p>The 3D models are enriched with information about the accuracy of the digital reconstruction, creating 3D databasesthat can be easily consulted and updated.</p></li></ul>


Sign in / Sign up

Export Citation Format

Share Document