Physical factors affecting the impact strength of polycarbonate

1982 ◽  
Vol 17 (1) ◽  
pp. 199-203 ◽  
Author(s):  
J. A. Zurimendi ◽  
F. Biddlestone ◽  
J. N. Hay ◽  
R. N. Haward
Keyword(s):  
Impact Strength ◽  
Physical Factors ◽  
Factors Affecting ◽  
The Impact

scholarly journals Aphid–Plant–Phytovirus Pathosystems: Influencing Factors from Vector Behaviour to Virus Spread

Agriculture ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 502
Author(s):  
Junior Corneille Fingu-Mabola ◽  
Frédéric Francis
Keyword(s):  
Influencing Factors ◽  
Virus Transmission ◽  
Physical Factors ◽  
Factors Affecting ◽  
Vector Borne Diseases ◽  
Vector Behaviour ◽  
Crop Fields ◽  
Host Seeking ◽  
The Impact ◽  
Vector Efficiency

Aphids are responsible for the spread of more than half of the known phytovirus species. Virus transmission within the plant–aphid–phytovirus pathosystem depends on vector mobility which allows the aphid to reach its host plant and on vector efficiency in terms of ability to transmit phytoviruses. However, several other factors can influence the phytoviruses transmission process and have significant epidemiological consequences. In this review, we aimed to analyse the aphid behaviours and influencing factors affecting phytovirus spread. We discussed the impact of vector host-seeking and dispersal behaviours mostly involved in aphid-born phytovirus spread but also the effect of feeding behaviours and life history traits involved in plant–aphid–phytovirus relationships on vector performances. We also noted that these behaviours are influenced by factors inherent to the interactions between pathosystem components (mode of transmission of phytoviruses, vector efficiency, plant resistance, …) and several biological, biochemical, chemical or physical factors related to the environment of these pathosystem components, most of them being manipulated as means to control vector-borne diseases in the crop fields.

scholarly journals Environmental Factors Causing the Development of Microorganisms on the Surfaces of National Cultural Monuments Made of Mineral Building Materials—Review

Coatings ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 1203
Author(s):  
Elżbieta Stanaszek-Tomal
Keyword(s):  
Environmental Factors ◽  
Building Materials ◽  
Ion Concentration ◽  
Physical Factors ◽  
Comprehensive Overview ◽  
Hydrogen Ion Concentration ◽  
Factors Affecting ◽  
Stone Concrete ◽  
The Impact ◽  
Cultural Monuments

The ability of microorganisms to degrade building materials depends on several factors. Biological corrosion occurs in close dependence with chemical and physical factors affecting microorganisms. The growth and development of microorganisms is stimulated by external stimuli, i.e., environmental factors. Microorganisms have a relatively large tolerance range for changes in environmental conditions. Under the right conditions, microorganisms thrive very well. The adverse effects may cause the inhibition of cell growth, damage, or lead to the death of the microorganism. Considering the impact of environmental factors on microorganisms, it is not possible to identify the most important of them. The result effect of overlapping factors determines the possibility of the growth of certain microorganisms. The main factors affecting the growth are temperature, humidity, hydrogen ion concentration in the environment, oxidoreductive potential, water activity in the environment, and hydrostatic pressure. This article provides a comprehensive overview of the factors causing biodeterioration. The influence of external/internal environment on the surface of cultural monuments made of mineral building materials, i.e., stone, concrete, mortar, etc., is presented.

scholarly journals WORK ACCELERATION STRATEGY DEVELOPMENT ON DESIGN-BUILD PROJECT TO IMPROVE RISK BASED QUALITY PERFORMANCE

2020 ◽  
pp. 10-15
Author(s):  
DITA AYUNINGTYAS ◽  
AYOMI DITA RARASATI
Keyword(s):  
Social Economy ◽  
Project Work ◽  
Strategy Development ◽  
Physical Factors ◽  
Literature Study ◽  
Quality Performance ◽  
Factors Affecting ◽  
Project Outcome ◽  
Design Build ◽  
The Impact

Design-build method has become a more popular procurement method in Indonesia. This method differs from other conventional procurement methods because the design and construction is one entity. All responsibilities are taken over by contractors so that the project outcome expected becomes more comprehensive. Design -build applies fast-track system. The work acceleration implemented during the construction will potentially generate risks on the performance, in this case quality performance. The implementation of risk management is expected to significantly reduce the impact of the risk on the quality performance of a project. The objective of this study is to analyze risks (the frequency and the impact) by identifying factors affecting the success of work acceleration, and thus work acceleration strategy can be developed for design-build project in order to improve risk based quality. This study is a qualitative research with literature study on factors of risks affecting quality performance and questioners given to experts and respondents who are experienced in design-build procurement. Risk factors analyzed in this study are competence of project owner, team leader, and project manager, planning and execution ability, procurement process, scope and nature of the project, work relationship among project teams, project owner’s information, physical factors, and social economy environment. The result of this study is work acceleration strategy on design-build project in order to improve risk based quality performance.

scholarly journals Radon Over Kimberlite Pipes: Estimation of the Emanation Properties of Rocks (Lomonosov Diamond Deposit, NW Russia)

2021 ◽  
Vol 11 (13) ◽  
pp. 6065
Author(s):  
Evgeny Yakovlev ◽  
Andrey Puchkov
Keyword(s):  
Experimental Studies ◽  
State Level ◽  
The Body ◽  
Free State ◽  
Physical Factors ◽  
Diamond Deposit ◽  
Factors Affecting ◽  
Emanation Coefficient ◽  
Host Rocks ◽  
The Impact

In this paper, using the example of the Lomonosov diamond deposit, experimental studies of rocks were carried out to assess the main radiation and physical factors affecting the formation of the radon field over the kimberlite pipes of the Arkhangelsk diamondiferous province. For various types of rocks, represented by vent kimberlites, tuffaceous-sedimentary rocks of the crater and enclosing and overlying sediments, the following were studied: porosity, density, activity of radium-226, activity of radon in a free state, level of radon production, and emanation coefficient. The research results showed that the greatest amount of radon in a free state is produced by rocks of the near-pipe space, represented by the enclosing Vendian V2 deposits and characterized by high values of the emanation coefficient, radium activity, radon production level and porosity. This fact is associated with the structural and geological features of the near-pipe space, which was exposed to the impact of kimberlite magma on the host rocks. The lowest values of these parameters are characteristic of the kimberlites of the vent facies, which limits the formation of free radon in the body of the pipe. The results of the experimental studies create prospects for the development of emanation methods for searching for kimberlite pipes in the conditions of the Arkhangelsk diamondiferous province.

DAMPAK KEBIJAKAN FISKAL TERHADAP KINERJA SEKTOR PERTANIAN DI SULAWESI TENGGARA

2017 ◽  
Vol 1 (1) ◽  
Author(s):  
La Ode Jabuddin ◽  
Ayub M Padangaran ◽  
Azhar Bafadal Bafadal
Keyword(s):  
Fiscal Policy ◽  
Interest Rates ◽  
Agricultural Sector ◽  
Simultaneous Equations ◽  
Poor People ◽  
Land Area ◽  
Factors Affecting ◽  
Historical Simulation ◽  
The Impact ◽  
Direct Expenditure

This study aims to: (1) Knowing the dynamics of fiscal policy and the performance of the agricultural sector, (2) Analyze the factors that influence fiscal policy and the performance                   of the agricultural sector, and (3) Analyzing the impact of fiscal policy on the performance of the agricultural sector. The data used in this study were pooled 2005-2013 data in the aggregate. Econometric model the impact of fiscal policy on the performance of the agricultural sector is built in the form of simultaneous equations, consisting of 7 equations with 25 total variables in the model, 7 endogenous variables, 12 exogenous variables, and 6 variables lag. The model is estimated by 2SLS method SYSLIN procedures and historical simulation with SIMNLIN procedure.The results showed that: (1) The development of fiscal policy in Southeast Sulawesi from year to year tends to increase, (2) The performance of the agricultural sector from the aspect of GDP has decreased, from the aspect of labor is still consistent, in terms of investment to grow positively, and assign roles which means to decrease the number of poor people, (3) factors affecting fiscal policy is local revenues, equalization funds, other revenues, as well as the lag fiscal policy, (4) the factors that affect the performance of the agricultural sector from the aspect GDP is labor, direct expenditure and GDP lag; from the aspect of labor is the total labor force, investment, land area, direct expenditure, as well as the lag of labor; from the aspect of investment is influenced by GDP per capita, land area, interest rates and investment lag; as well as from the aspect of poor people, are affected by population, investments, direct expenditure and poverty lag, (5). Fiscal policy impact on the agricultural sector GDP increase, a decrease in the number of poor, declining agricultural laborers, and a decrease in the amount of investment in the agricultural sector.Keywords: Fiscal policy, the performance of the agricultural sector, the simultaneous equations

Расчетные методы оценки ударной вязкости сварных элементов с трещинами

2020 ◽  
Vol 44 (3) ◽  
pp. 22-36
Author(s):  
Keyword(s):  
Stress Intensity ◽  
Impact Strength ◽  
Welded Joints ◽  
Development Process ◽  
Welded Joint ◽  
Operating Temperature ◽  
Crack Development ◽  
Heterogeneous Structure ◽  
Critical Crack Length ◽  
The Impact

Практика показывает, что для сварных конструкций, эксплуатируемых в условиях Крайнего Севера необходимо уделять внимание работоспособности сварных соединений при низких температурах. Металл сварных соединений в процессе воздействия обработки изменяет свои свойства, снижается ударная вязкость, образуется гетерогенная структура с большой степенью разнозернистости. Чтобы оценивать и иметь возможность правильно контролировать термическое воздействие и последствия сварочного процесса, требуется решить задачу аналитического определения ударной вязкости для всех зон сварного соединения. В настоящей статье представлен инженерный метод оценки ударной вязкости, применимый для любой зоны сварного соединения, в которой имеется острый или особый концентратор напряжений – трещина. Разработанный аналитический метод расчета ударной вязкости отражает качественную и количественную картину взаимосвязи структурно-механических характеристик и работы развития трещины в диапазоне температур 77…300 К. Предложенная схематизация зависимости критического коэффициента интенсивности напряжений от температуры позволила найти коэффициенты, характеризующие свойства материала, и выполнить расчеты изменения предела текучести и предела прочности от температуры эксплуатации. Построены графики зависимости работы развития трещины от температуры эксплуатации для сталей 15ГС и 17ГС, сравнение которых с экспериментальными данными показывает удовлетворительное согласование. Найдено, что при напряжениях предела выносливости отношение работы развития трещины к критической длине трещины постоянно, не зависит от температуры и для сталей 15ГС и 17ГС равно около 10. Ключевые слова: ударная вязкость, работа разрушения, коэффициент интенсивности напряжений, трещина, феррито-перлитная сталь, зона термического влияния. For welded structures under operation in the Far North, attention must be paid to the performance of welded joints at low temperatures. The properties of metal of welded joints are changed in the process of treatment, its toughness decreases, and a heterogeneous structure with a large range of different grain sizes is formed. In order to evaluate and be able to correctly control the thermal effect and the consequences of the welding process, it is necessary to solve the problem of analytical determination of impact strength for all zones of the welded joint. The paper presents an engineering method for evaluation of the impact strength applicable to any area of the welded joint in which there is a sharp or super sharp stress concentrator – a crack. The developed analytical method for calculating the impact strength reflects a qualitative and quantitative codependency of structural and mechanical characteristics and the process of crack development in the temperature range of 77–300 K. The proposed schematization of dependence of the critical coefficient of stress intensity on the temperature made it possible to find coefficients characterizing the properties of the material and to perform calculations of changes in yield strength and tensile strength on operating temperature. Graphs of the crack development process dependency on the operating temperature for 15ГС and 17ГС steels were constructed, and their comparison with experimental data displays satisfactory agreement. It was found that at endurance limit stresses, the ratio of the crack development process to the critical crack length is constant, non-dependent on temperature, and is equal to 10 for 15ГС and 17ГС steels. Keywords: impact strength, fracture work, stress intensity factor, crack, ferrite-pearlite steel, heat affected zone, steel tempering.

Impact Strength, Flexural Modulus and Wear Rate of PMMA Composites Reinforced by Eggshell Powders

2020 ◽  
Vol 38 (7A) ◽  
pp. 960-966
Author(s):  
Aseel M. Abdullah ◽  
Hussein Jaber ◽  
Hanaa A. Al-Kaisy
Keyword(s):  
Impact Strength ◽  
Wear Rate ◽  
Flexural Modulus ◽  
Matrix Material ◽  
Weight Fraction ◽  
Pure Pmma ◽  
Calcination Process ◽  
The Matrix ◽  
The Impact ◽  
Interface Bond

In the present study, the impact strength, flexural modulus, and wear rate of poly methyl methacrylate (PMMA) with eggshell powder (ESP) composites have been investigated. The PMMA used as a matrix material reinforced with ESP at two different states (including untreated eggshell powder (UTESP) and treated eggshell powder (TESP)). Both UTESP and TESP were mixed with PMMA at different weight fractions ranged from (1-5) wt.%. The results revealed that the mechanical properties of the PMMA/ESP composites were enhanced steadily with increasing eggshell contents. The samples with 5 wt.% of UTESP and TESP additions give the maximum values of impact strength, about twice the value of the pure PMMA sample. The calcination process of eggshells powders gives better properties of the PMMA samples compared with the UTESP at the same weight fraction due to improvements in the interface bond between the matrix and particles. The wear characteristics of the PMMA composites decrease by about 57% with increases the weight fraction of TESP up to 5 wt.%. The flexural modulus values are slightly enhanced by increasing of the ESP contents in the PMMA composites.

Structural Model of Service Quality Factors Affecting Loyalty Sustainability

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Eman Al-erqi ◽  
◽  
Mohd Lizam Mohd Diah ◽  
Najmaddin Abo Mosali ◽  
◽  
...  
Keyword(s):  
International Students ◽  
Service Quality ◽  
Goodness Of Fit ◽  
Structural Model ◽  
Quality Factors ◽  
Factors Affecting ◽  
Measurement Models ◽  
Confirmatory Factor ◽  
The University ◽  
The Impact

This study seeks to address the impact of service quality affecting international student's satisfaction towards loyalty tothe Universiti Tun Hussein Onn Malaysia(UTHM). The aim of thestudy is to develop relationship between service quality factor and loyalty to the university from the international students’ perspectives. The study adopted quantitative approach where data was collected through questionnaire survey and analysed statistically. A total of 246 responses were received and found to be valid. The model was developed and analysed using AMOS-SEM software. Confirmatory factor analysis (CFA) function of the software was to assessed the measurement models and found that all the models achieved goodness of fit. Then path analysis function was used to assessed structural model and found that service qualityfactors have a significant effect on the students’ satisfaction and thus affecting the loyaltyto the university. Hopefully the outcome form this study will benefit the university in providing services especially to the international students.

Working conditions and the formation of health risks among workers of the petrochemical industry engaged in the production of methanol and its derivatives

2019 ◽  
pp. 266-271
Author(s):  
Nina M. Meshchakova ◽  
Marina P. Dyakovich ◽  
Salim F. Shayakhmetov
Keyword(s):  
Working Conditions ◽  
Health Risks ◽  
Quantitative Assessment ◽  
Circulatory System ◽  
Medical Examination ◽  
Physical Factors ◽  
Labor Intensity ◽  
Industrial Noise ◽  
Harmful Substances ◽  
The Impact

Introduction.Methanol and its derivatives occupy one of the leading places among the main organic synthesis intermediates in terms of their importance and scale of production. According to experts, by 2027 the global demand for methanol can reach 135 million tons, the annual growth will be about 5.5%. However, there is little information regarding the assessment of working conditions and occupational risks for workers in modern methanol production and its derivatives.The aim of the studyis hygienic assessment of working conditions and the formation of health risks in workers of modern production of methanol and methylamines.Materials and methods.The assessment of the main adverse factors of production is given. When studying the state of health, objective indicators (the results of an in-depth medical examination) and subjective (the results of a quantitative assessment of the risks of the main pathological syndromes associated with health) are considered.Results.According to long-term observations, the concentration of harmful substances in the air of the working area, indicators of labor severity, parameters of physical factors met hygienic requirements, with the exception of industrial noise exceeding the maximum permissible level, as well as labor intensity of 1 degree. The General assessment of working conditions corresponds to the category of harmful 2 degrees (3.2). According to the results of the medical examination and quantitative assessment of the risks of health disorders in workers, the most significant were functional disorders and diseases of the circulatory system. The levels of somatic pathology on the part of the main body systems were significantly higher in apparatchiks compared to the engineering and technical personnel (ETP).Conclusions:In the production of methyl alcohol and methylamines, the main hygienic importance is the impact on workers of the complex of harmful substances of 1-IV hazard classes in low concentrations, increased levels of industrial noise, labor intensity of 1 degree. According to the subjective assessment of health and medical examination, the greatest prevalence of health risks in workers was observed from the circulatory system, and the levels of the revealed somatic pathology were statistically significantly higher in apparatchiks compared with the ETP.

Sign in / Sign up

Export Citation Format

Share Document