scholarly journals On the hydrodynamics of unstable excitations

2020 ◽  
Vol 2020 (9) ◽  
Author(s):  
Olalla A. Castro-Alvaredo ◽  
Cecilia De Fazio ◽  
Benjamin Doyon ◽  
Francesco Ravanini
Keyword(s):  
Bound States ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Scattering Matrix ◽  
Large Temperature ◽  
Analytic Structure ◽  
Quantum Field Theories ◽  
Unstable Particles ◽  
Hydrodynamic Approach ◽  
Stable Particles

Abstract The generalized hydrodynamic (GHD) approach has been extremely successful in describing the out-of-equilibrium properties of a great variety of integrable many-body quantum systems. It naturally extracts the large-scale dynamical degrees of freedom of the system, and is thus a particularly good probe for emergent phenomena. One such phenomenon is the presence of unstable particles, traditionally seen via special analytic structures of the scattering matrix. Because of their finite lifetime and energy threshold, these are especially hard to study. In this paper we apply the GHD approach to a model possessing both unstable excitations and quantum integrability. The largest family of relativistic integrable quantum field theories known to have these features are the homogeneous sine-Gordon models. We consider the simplest non-trivial example of such theories and investigate the effect of an unstable excitation on various physical quantities, both at equilibrium and in the non-equilibrium state arising from the partitioning protocol. The hydrodynamic approach sheds new light onto the physics of the unstable particle, going much beyond its definition via the analytic structure of the scattering matrix, and clarifies its effects both on the equilibrium and out-of-equilibrium properties of the theory. Crucially, within this dynamical perspective, we identify unstable particles as finitely-lived bound states of co-propagating stable particles of different types, and observe how stable populations of unstable particles emerge in large-temperature thermal baths.

scholarly journals Simulation of Dual Mixed Refrigerant Natural Gas Liquefaction Processes Using a Nonsmooth Framework

Processes ◽  
2018 ◽  
Vol 6 (10) ◽  
pp. 193 ◽  
Author(s):  
Matias Vikse ◽  
Harry Watson ◽  
Truls Gundersen ◽  
Paul Barton
Keyword(s):  
Natural Gas ◽  
Heat Exchangers ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Aspen Plus ◽  
Large Temperature ◽  
Scale Production ◽  
Simulation Tool ◽  
Natural Gas Liquefaction ◽  
Feasible Solutions

Natural gas liquefaction is an energy intensive process where the feed is cooled from ambient temperature down to cryogenic temperatures. Different liquefaction cycles exist depending on the application, with dual mixed refrigerant processes normally considered for the large-scale production of Liquefied Natural Gas (LNG). Large temperature spans and small temperature differences in the heat exchangers make the liquefaction processes difficult to analyze. Exergetic losses from irreversible heat transfer increase exponentially with a decreasing temperature at subambient conditions. Consequently, an accurate and robust simulation tool is paramount to allow designers to make correct design decisions. However, conventional process simulators, such as Aspen Plus, suffer from significant drawbacks when modeling multistream heat exchangers. In particular, no rigorous checks exist to prevent temperature crossovers. Limited degrees of freedom and the inability to solve for stream variables other than outlet temperatures also makes such tools inflexible to use, often requiring the user to resort to a manual iterative procedure to obtain a feasible solution. In this article, a nonsmooth, multistream heat exchanger model is used to develop a simulation tool for two different dual mixed refrigerant processes. Case studies are presented for which Aspen Plus fails to obtain thermodynamically feasible solutions.

scholarly journals Dynamic Loads and Response of a Spar Buoy Wind Turbine with Pitch-Controlled Rotating Blades: An Experimental Study

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3598
Author(s):  
Sara Russo ◽  
Pasquale Contestabile ◽  
Andrea Bardazzi ◽  
Elisa Leone ◽  
Gregorio Iglesias ◽  
...  
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Laboratory Data ◽  
Nonlinear Behavior ◽  
Offshore Wind ◽  
Small Scale ◽  
Wave Steepness ◽  
Design Factor

New large-scale laboratory data are presented on a physical model of a spar buoy wind turbine with angular motion of control surfaces implemented (pitch control). The peculiarity of this type of rotating blade represents an essential aspect when studying floating offshore wind structures. Experiments were designed specifically to compare different operational environmental conditions in terms of wave steepness and wind speed. Results discussed here were derived from an analysis of only a part of the whole dataset. Consistent with recent small-scale experiments, data clearly show that the waves contributed to most of the model motions and mooring loads. A significant nonlinear behavior for sway, roll and yaw has been detected, whereas an increase in the wave period makes the wind speed less influential for surge, heave and pitch. In general, as the steepness increases, the oscillations decrease. However, higher wind speed does not mean greater platform motions. Data also indicate a significant role of the blade rotation in the turbine thrust, nacelle dynamic forces and power in six degrees of freedom. Certain pairs of wind speed-wave steepness are particularly unfavorable, since the first harmonic of the rotor (coupled to the first wave harmonic) causes the thrust force to be larger than that in more energetic sea states. The experiments suggest that the inclusion of pitch-controlled, variable-speed blades in physical (and numerical) tests on such types of structures is crucial, highlighting the importance of pitch motion as an important design factor.

scholarly journals Automated Quality Assessment of Interferometric Ring Laser Data

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3425
Author(s):  
Andreas Brotzer ◽  
Felix Bernauer ◽  
Karl Ulrich Schreiber ◽  
Joachim Wassermann ◽  
Heiner Igel
Keyword(s):  
Quality Assessment ◽  
Ground Motion ◽  
Ring Laser ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Scientific Field ◽  
Optical Frequency ◽  
Laser Array ◽  
Laser Data ◽  
Rotational Motions

In seismology, an increased effort to observe all 12 degrees of freedom of seismic ground motion by complementing translational ground motion observations with measurements of strain and rotational motions could be witnessed in recent decades, aiming at an enhanced probing and understanding of Earth and other planetary bodies. The evolution of optical instrumentation, in particular large-scale ring laser installations, such as G-ring and ROMY (ROtational Motion in seismologY), and their geoscientific application have contributed significantly to the emergence of this scientific field. The currently most advanced, large-scale ring laser array is ROMY, which is unprecedented in scale and design. As a heterolithic structure, ROMY’s ring laser components are subject to optical frequency drifts. Such Sagnac interferometers require new considerations and approaches concerning data acquisition, processing and quality assessment, compared to conventional, mechanical instrumentation. We present an automated approach to assess the data quality and the performance of a ring laser, based on characteristics of the interferometric Sagnac signal. The developed scheme is applied to ROMY data to detect compromised operation states and assign quality flags. When ROMY’s database becomes publicly accessible, this assessment will be employed to provide a quality control feature for data requests.

scholarly journals On the short-term variability of turbulence and temperature in the winter mesosphere

2018 ◽  
Vol 36 (4) ◽  
pp. 1099-1116
Author(s):  
Gerald A. Lehmacher ◽  
Miguel F. Larsen ◽  
Richard L. Collins ◽  
Aroh Barjatya ◽  
Boris Strelnikov
Keyword(s):  
Attitude Control ◽  
Large Scale ◽  
Lower Thermosphere ◽  
Density Fluctuations ◽  
Large Temperature ◽  
Small Scale ◽  
Spatial And Temporal Variability ◽  
Temperature Structure ◽  
Wind Shears

Abstract. Four mesosphere–lower thermosphere temperature and turbulence profiles were obtained in situ within ∼30 min and over an area of about 100 by 100 km during a sounding rocket experiment conducted on 26 January 2015 at Poker Flat Research Range in Alaska. In this paper we examine the spatial and temporal variability of mesospheric turbulence in relationship to the static stability of the background atmosphere. Using active payload attitude control, neutral density fluctuations, a tracer for turbulence, were observed with very little interference from the payload spin motion, and with high precision (<0.01 %) at sub-meter resolution. The large-scale vertical temperature structure was very consistent between the four soundings. The mesosphere was almost isothermal, which means more stratified, between 60 and 80 km, and again between 88 and 95 km. The stratified regions adjoined quasi-adiabatic regions assumed to be well mixed. Additional evidence of vertical transport and convective activity comes from sodium densities and trimethyl aluminum trail development, respectively, which were both observed simultaneously with the in situ measurements. We found considerable kilometer-scale temperature variability with amplitudes of 20 K in the stratified region below 80 km. Several thin turbulent layers were embedded in this region, differing in width and altitude for each profile. Energy dissipation rates varied between 0.1 and 10 mW kg−1, which is typical for the winter mesosphere. Very little turbulence was observed above 82 km, consistent with very weak small-scale gravity wave activity in the upper mesosphere during the launch night. On the other hand, above the cold and prominent mesopause at 102 km, large temperature excursions of +40 to +70 K were observed. Simultaneous wind measurements revealed extreme wind shears near 108 km, and combined with the observed temperature gradient, isolated regions of unstable Richardson numbers (0<Ri<0.25) were detected in the lower thermosphere. The experiment was launched into a bright auroral arc under moderately disturbed conditions (Kp∼5).

Performance of Core Exit Thermocouple for PWR Accident Management Action in Vessel Top Break LOCA Simulation Experiment at OECD/NEA ROSA Project

2008 ◽  
Author(s):  
Mitsuhiro Suzuki ◽  
Takeshi Takeda ◽  
Hideo Nakamura
Keyword(s):  
Time Delay ◽  
Large Scale ◽  
Simulation Experiment ◽  
Three Dimensional ◽  
Test Facility ◽  
Large Temperature ◽  
Energy Agency ◽  
Pressurized Water ◽  
The Core ◽  
Accident Management

Presented are experiment results of the Large Scale Test Facility (LSTF) conducted at the Japan Atomic Energy Agency (JAEA) with a focus on core exit thermocouple (CET) performance to detect core overheat during a vessel top break loss-of-coolant accident (LOCA) simulation experiment. The CET temperatures are used to start accident management (AM) action to quickly depressurize steam generator (SG) secondary sides in case of core temperature excursion. Test 6-1 is the first test of the OECD/NEA ROSA Project started in 2005, simulating withdraw of a control rod drive mechanism penetration nozzle at the vessel top head. The break size is equivalent to 1.9% cold leg break. The AM action was initiated when CET temperature rose up to 623K. There was no reflux water fallback onto the CETs during the core heat-up period. The core overheat, however, was detected with a time delay of about 230s. In addition, a large temperature discrepancy was observed between the CETs and the hottest core region. This paper clarifies the reasons of time delay and temperature discrepancy between the CETs and heated core during boil-off including three-dimensional steam flows in the core and core exit. The paper discusses applicability of the LSTF CET performance to pressurized water reactor (PWR) conditions and a possibility of alternative indicators for earlier AM action than in Test 6-1 is studied by using symptom-based plant parameters such as a reactor vessel water level detection.

Integrated Redesign of Large-Scale Structures by Large Admissible Perturbations

2003 ◽  
Vol 125 (4) ◽  
pp. 234-241 ◽  
Author(s):  
Vincent Y. Blouin ◽  
Michael M. Bernitsas ◽  
Denby Morrison
Keyword(s):  
Degrees Of Freedom ◽  
Large Scale ◽  
Direct Method ◽  
Computational Effort ◽  
Forced Response ◽  
Response Amplitude ◽  
Computational Time ◽  
Performance Constraints ◽  
Large Admissible Perturbations ◽  
Design Selection

In structural redesign (inverse design), selection of the number and type of performance constraints is a major challenge. This issue is directly related to the computational effort and, most importantly, to the success of the optimization solver in finding a solution. These issues are the focus of this paper, which provides and discusses techniques that can help designers formulate a well-posed integrated complex redesign problem. LargE Admissible Perturbations (LEAP) is a general methodology, which solves redesign problems of complex structures with, among others, free vibration, static deformation, and forced response amplitude constraints. The existing algorithm, referred to as the Incremental Method is improved in this paper for problems with static and forced response amplitude constraints. This new algorithm, referred to as the Direct Method, offers comparable level of accuracy for less computational time and provides robustness in solving large-scale redesign problems in the presence of damping, nonstructural mass, and fluid-structure interaction effects. Common redesign problems include several natural frequency constraints and forced response amplitude constraints at various frequencies of excitation. Several locations on the structure and degrees of freedom can be constrained simultaneously. The designer must exercise judgment and physical intuition to limit the number of constraints and consequently the computational time. Strategies and guidelines are discussed. Such techniques are presented and applied to a 2,694 degree of freedom offshore tower.

Analytical Model for Rockfall Protection Galleries - a Blind Prediction of Test Results and Conclusion

2011 ◽  
Vol 82 ◽  
pp. 722-727 ◽  
Author(s):  
Kristian Schellenberg ◽  
Norimitsu Kishi ◽  
Hisashi Kon-No
Keyword(s):  
Degrees Of Freedom ◽  
Large Scale ◽  
Test Results ◽  
Blind Prediction ◽  
Proposed Model ◽  
Input Parameters ◽  
Scale Test ◽  
Definition Of ◽  
Protective Structures ◽  
Cushion Layer

A system of multiple degrees of freedom composed out of three masses and three springs has been presented in 2008 for analyzing rockfall impacts on protective structures covered by a cushion layer. The model has then been used for a blind prediction of a large-scale test carried out in Sapporo, Japan, in November 2009. The test results showed substantial deviations from the blind predictions, which led to a deeper evaluation of the model input parameters showing a significant influence of the modeling properties for the cushion layer on the overall results. The cushion properties include also assumptions for the loading geometry and the definition of the parameters can be challenging. This paper introduces the test setup and the selected parameters in the proposed model for the blind prediction. After comparison with the test results, adjustments in the input parameters in order to match the test results have been evaluated. Conclusions for the application of the model as well as for further model improvements are drawn.

scholarly journals Shell model description of heavy nuclei and abnormal collective motions

2018 ◽  
Vol 178 ◽  
pp. 02015
Author(s):  
Chong Qi
Keyword(s):  
Shell Model ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Model Description ◽  
Heavy Nuclei ◽  
Collective Models ◽  
Collective Behaviors ◽  
Electromagnetic Transition ◽  
Nuclear Shell ◽  
Model Approach

In this contribution I present systematic calculations on the spectroscopy and electromagnetic transition properties of intermediate-mass and heavy nuclei around 100Sn and 208Pb. We employed the large-scale configuration interaction shell model approach with realistic interactions. Those nuclei are the longest isotopic chains that can be studied by the nuclear shell model. I will show that the yrast spectra of Te isotopes show a vibrational-like equally spaced pattern but the few known E2 transitions show rotational-like behaviour. These kinds of abnormal collective behaviors cannot be reproduced by standard collective models and provide excellent background to study the competition of single-particle and various collective degrees of freedom. Moreover, the calculated B(E2) values for neutron-deficient and heavier Te isotopes show contrasting different behaviours along the yrast line, which may be related to the enhanced neutron-proton correlation when approaching N=50. The deviations between theory and experiment concerning the energies and E2 transition properties of low-lying 0+ and 2+ excited states and isomeric states in those nuclei may provide a constraint on our understanding of nuclear deformation and intruder configuration in that region.

Maximum load determination of nonholonomic mobile manipulator using hierarchical optimal control

Robotica ◽  
2011 ◽  
Vol 30 (1) ◽  
pp. 53-65 ◽  
Author(s):  
M. H. Korayem ◽  
V. Azimirad ◽  
H. Vatanjou ◽  
A. H. Korayem
Keyword(s):  
Optimal Control ◽  
Degrees Of Freedom ◽  
Large Scale ◽  
Maximum Load ◽  
Mobile Manipulator ◽  
Interaction Terms ◽  
Different Types ◽  
Interaction Variables ◽  
Maximum Allowable Dynamic Load

SUMMARYThis paper presents a new method using hierarchical optimal control for path planning and calculating maximum allowable dynamic load (MADL) of wheeled mobile manipulator (WMM). This method is useful for high degrees of freedom WMMs. First, the overall system is decoupled to a set of subsystems, and then, hierarchical optimal control is applied on them. The presented algorithm is a two-level hierarchical algorithm. In the first level, interaction terms between subsystems are fixed, and in the second level, the optimization problem for subsystems is solved. The results of second level are used for calculating new estimations of interaction variables in the first level. For calculating MADL, the load on the end effector is increased until actuators get into saturation. Given a large-scale robot, we show how the presenting in distributed hierarchy in optimal control helps to find MADL fast. Also, it enables us to treat with complicated cost functions that are generated by obstacle avoidance terms. The effectiveness of this approach on simulation case studies for different types of WMMs as well as an experiment for a mobile manipulator called Scout is shown.

scholarly journals Flow of S-matrix poles for elementary quantum potentials1This research was supported in part by an NSERC Undergraduate Summer Research Award (SGN) and an NSERC Discovery Grant (MAW).

2011 ◽  
Vol 89 (11) ◽  
pp. 1127-1140 ◽  
Author(s):  
B. Belchev ◽  
S.G. Neale ◽  
M.A. Walton
Keyword(s):  
Bound States ◽  
Scattering Matrix ◽  
Nucl Phys ◽  
Quantum Scattering ◽  
Research Award ◽  
Momentum Plane ◽  
S Matrix ◽  
Potential Depth ◽  
Square Well ◽  
Insight Into

The poles of the quantum scattering matrix (S-matrix) in the complex momentum plane have been studied extensively. Bound states give rise to S-matrix poles, and other poles correspond to non-normalizable antibound, resonance, and antiresonance states. They describe important physics but their locations can be difficult to determine. In pioneering work, Nussenzveig (Nucl. Phys. 11, 499 (1959)) performed the analysis for a square well (wall), and plotted the flow of the poles as the potential depth (height) varied. More than fifty years later, however, little has been done in the way of direct generalization of those results. We point out that today we can find such poles easily and efficiently using numerical techniques and widely available software. We study the poles of the scattering matrix for the simplest piecewise flat potentials, with one and two adjacent (nonzero) pieces. For the finite well (wall) the flow of the poles as a function of the depth (height) recovers the results of Nussenzveig. We then analyze the flow for a potential with two independent parts that can be attractive or repulsive, the two-piece potential. These examples provide some insight into the complicated behavior of the resonance, antiresonance, and antibound poles.

Sign in / Sign up

Export Citation Format

Share Document