scholarly journals Low Mg content on Ti-Nb-Sn alloy when in contact with eBMMSCs promotes improvement of its biological functions

2021 ◽  
Vol 32 (12) ◽  
Author(s):  
Carolina da Silva Dias ◽  
Mariana Correa Rossi ◽  
Emanuel V. P. Apolonio ◽  
Gustavo dos Santos Rosa ◽  
João Pedro Hübbe Pfeifer ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Osteogenic Differentiation ◽  
Cortical Bone ◽  
Conditioned Medium ◽  
Morphological Characteristics ◽  
Ion Release ◽  
Alizarin Red ◽  
Porous Ti ◽  
Atomic Force

AbstractMagnesium is a metal used in the composition of titanium alloys and imparts porosity. Due to its osteoconductive, biocompatible and biodegradable characteristics, its application in the development of biomedical materials has become attractive. This study aimed to evaluate the influence of magnesium present in porous Ti-Nb-Sn alloys, which have a low elastic modulus in adhesive, osteogenic properties and the amount of reactive intracellular oxygen species released in mesenchymal stem cells derived from bone marrow equine bone (eBMMSCs). Mechanical properties of the alloy, such as hardness, compressive strength and elastic modulus, were analyzed, as well as surface morphological characteristics through scanning electron microscopy. The evaluation of magnesium ion release was performed by atomic force spectroscopy. The biological characteristics of the alloy, when in contact with the alloy surface and with the culture medium conditioned with the alloy, were studied by SEM and optical microscopy. Confirmation of osteogenic differentiation by alizarin red and detection of ROS using a Muse® Oxidative Stress Kit based on dihydroetide (DHE). The alloy showed an elastic modulus close to cortical bone values. The hardness was close to commercial Ti grade 2, and the compressive strength was greater than the value of cortical bone. The eBMMSCs adhered to the surface of the alloy during the experimental time. Osteogenic differentiation was observed with the treatment of eBMMMSCs with conditioned medium. The eBMMSCs treated with conditioned medium decreased ROS production, indicating a possible antioxidant defense potential of magnesium release.

scholarly journals Low Mg Content on Ti-Nb-Sn Alloy When in Contact with BMMSCs Promotes Improvement of its Biological Functions

2021 ◽  
Author(s):  
Carolina da Silva Dias ◽  
Mariana Correa Rossi ◽  
Emanuel V. P. Apolonio ◽  
Gustavo dos Santos Rosa ◽  
João Pedro Hübbe Pfeifer ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Elastic Modulus ◽  
Osteogenic Differentiation ◽  
Cortical Bone ◽  
Conditioned Medium ◽  
Morphological Characteristics ◽  
Ion Release ◽  
Alizarin Red ◽  
Porous Ti ◽  
Atomic Force

Abstract Introduction: Magnesium is a metal used in the composition of titanium alloys and imparts porosity. Due to its osteoconductive, biocompatible and biodegradable characteristics, its application in the development of biomedical materials has become attractive.Objective: This study aimed to evaluate the influence of magnesium present in porous Ti-Nb-Sn alloys, which have a low elastic modulus in adhesive, osteogenic properties and the amount of reactive intracellular oxygen species released in mesenchymal stem cells derived from bone marrow equine bone (eBMMSCs).Methods: Mechanical properties of the alloy, such as hardness, compressive strength and elastic modulus, were analyzed, as well as surface morphological characteristics through scanning electron microscopy. The evaluation of magnesium ion release was performed by atomic force spectroscopy. The biological characteristics of the alloy, when in contact with the alloy surface and with the culture medium conditioned with the alloy, were studied by SEM and optical microscopy. Confirmation of osteogenic differentiation by alizarin red and detection of ROS using a Muse® Oxidative Stress Kit based on dihydroetide (DHE).Results and discussion: The alloy showed an elastic modulus close to cortical bone values. The hardness was close to commercial Ti grade 2, and the compressive strength was greater than the value of cortical bone. The eBMMSCs adhered to the surface of the alloy during the experimental time. Osteogenic differentiation was observed with the treatment of eBMMMSCs with conditioned medium. The eBMMSCs treated with conditioned medium decreased ROS production, indicating a possible antioxidant defense potential of magnesium release.

scholarly journals Yunnan Baiyao Conditioned Medium Promotes the Odonto/Osteogenic Capacity of Stem Cells from Apical Papilla via Nuclear Factor Kappa B Signaling Pathway

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Xiyao Pang ◽  
Yanqiu Wang ◽  
Jintao Wu ◽  
Zhou Zhou ◽  
Tao Xu ◽  
...  
Keyword(s):  
Stem Cells ◽  
Alkaline Phosphatase ◽  
Osteogenic Differentiation ◽  
Conditioned Medium ◽  
Signaling Pathway ◽  
Cell Counting ◽  
Dependent Manner ◽  
Alizarin Red ◽  
Apical Papilla ◽  
Yunnan Baiyao

Yunnan Baiyao is a traditional Chinese herbal remedy that has long been used for its characteristics of wound healing, bone regeneration, and anti-inflammation. However, the effects of Yunnan Baiyao on the odonto/osteogenic differentiation of stem cells from apical papilla (SCAPs) and the potential mechanisms remain unclear. The aim of this study was to investigate the odonto/osteogenic differentiation effects of Yunnan Baiyao on SCAPs and the underlying mechanisms involved. SCAPs were isolated and cocultured with Yunnan Baiyao conditioned media. The proliferation ability was determined by cell counting kit 8 and flow cytometry. The differentiation capacity and the involvement of NF-κB pathway were investigated by alkaline phosphatase assay, alizarin red staining, immunofluorescence assay, real-time RT-PCR, and western blot analyses. Yunnan Baiyao conditioned medium at the concentration of 50 μg/mL upregulated alkaline phosphatase activity, induced more mineralized nodules, and increased the expression of odonto/osteogenic genes/proteins (e.g., OCN/OCN, OPN/OPN, OSX/OSX, RUNX2/RUNX2, ALP/ALP, COL-I/COL-I, DMP1, DSP/DSPP) of SCAPs. In addition, the expression of cytoplasmic phos-IκBα, phos-P65, and nuclear P65 was significantly increased in Yunnan Baiyao conditioned medium treated SCAPs in a time-dependent manner. Conversely, the differentiation of Yunnan Baiyao conditioned medium treated SCAPs was obviously inhibited when these stem cells were cocultured with the specific NF-κB inhibitor BMS345541. Yunnan Baiyao can promote the odonto/osteogenic differentiation of SCAPs via the NF-κB signaling pathway.

Effect of Sintering Temperature on Porous Structures and Mechanical Properties of Ti-39Nb-6Zr Alloys

2016 ◽  
Vol 848 ◽  
pp. 532-537 ◽  
Author(s):  
Ye Shao ◽  
Xiao Yun Song ◽  
Wen Jun Ye ◽  
Song Xiao Hui ◽  
Yang Yu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Sintering Temperature ◽  
Porous Structures ◽  
Powder Metallurgy Technique ◽  
Porous Ti ◽  
The Stability ◽  
Surrounding Bone ◽  
Compressive Tests

Titanium and its alloys have been widely used as implants replacing hard human tissues in biomedical fields. To improve the stability of implants in the surrounding bone tissues, the materials with porous structures were fabricated. In this paper powder metallurgy technique was employed to fabricate porous Ti-39Zr-6Nb (wt.%) alloys. The porous structures and mechanical properties of the porous alloys were examined by scanning electron microscopy (SEM) and compressive tests. The results showed that with increasing the sintering temperature the porosity of the alloys decreased and the compressive strength and the elastic modulus increased. The porosity of the alloys was in the range from 20.8% to 23.2%, and the pore sizes mostly centered in 10~30μm. The compressive strength and the elastic modulus were in the range from 110.4 to 292.4MPa and 4.7 to 12.4GPa respectively, which was close to human bone.

scholarly journals Finite Element Analysis of Porous Ti-6Al-4V Alloy Structures for Biomedical Applications

2021 ◽  
Vol 2070 (1) ◽  
pp. 012224
Author(s):  
N Ganesh ◽  
S Rambabu
Keyword(s):  
Finite Element ◽  
Elastic Modulus ◽  
Cortical Bone ◽  
Bone Ingrowth ◽  
Stress Shielding ◽  
Shielding Effect ◽  
Element Analysis ◽  
Human Cortical Bone ◽  
Porous Ti ◽  
Manufacturing Technologies

Abstract In this article, design and finite element simulation of porous Ti-6Al-4V alloy structures was presented. Typically, titanium and titanium alloy implants can be manufactured with required pore size and porosity volume by using powder bed fusion techniques due to advancement in additive manufacturing technologies. However, the mismatch of elastic modulus between human cortical bone and the dense Ti-6Al-4V alloy implant resulted in stress shielding which accelerate the implant failure. The porous implant structures help in reduce the mismatch of elastic modulus between the cortical bone and implant structure and also improve the bone ingrowth. Hence, the present work focuses on design of Ti-6Al-4V alloy porous structures with various porosities ranging from 10% to 70% and simulated to determine the elastic modulus suitable for human cortical bone. The sample with 45% porosity is found to be best suited for replacement of cortical bone with elastic modulus of 74Gpa, preventing stress shielding effect and enhanced chances of bone ingrowth.

scholarly journals Experimental Analysis of the Mechanical Properties and Resistivity of Tectonic Coal Samples with Different Particle Sizes

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2303
Author(s):  
Congyu Zhong ◽  
Liwen Cao ◽  
Jishi Geng ◽  
Zhihao Jiang ◽  
Shuai Zhang
Keyword(s):  
Mechanical Properties ◽  
Particle Size ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Uniaxial Compressive Strength ◽  
Coalbed Methane ◽  
Coal Sample ◽  
Fine Particles ◽  
Particle Sizes ◽  
Tectonic Coal

Because of its weak cementation and abundant pores and cracks, it is difficult to obtain suitable samples of tectonic coal to test its mechanical properties. Therefore, the research and development of coalbed methane drilling and mining technology are restricted. In this study, tectonic coal samples are remodeled with different particle sizes to test the mechanical parameters and loading resistivity. The research results show that the particle size and gradation of tectonic coal significantly impact its uniaxial compressive strength and elastic modulus and affect changes in resistivity. As the converted particle size increases, the uniaxial compressive strength and elastic modulus decrease first and then tend to remain unchanged. The strength of the single-particle gradation coal sample decreases from 0.867 to 0.433 MPa and the elastic modulus decreases from 59.28 to 41.63 MPa with increasing particle size. The change in resistivity of the coal sample increases with increasing particle size, and the degree of resistivity variation decreases during the coal sample failure stage. In composite-particle gradation, the proportion of fine particles in the tectonic coal sample increases from 33% to 80%. Its strength and elastic modulus increase from 0.996 to 1.31 MPa and 83.96 to 125.4 MPa, respectively, and the resistivity change degree decreases. The proportion of medium particles or coarse particles increases, and the sample strength, elastic modulus, and resistivity changes all decrease.

scholarly journals Transcutaneous Drug Delivery Systems Based on Collagen/Polyurethane Composites Reinforced with Cellulose

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1845
Author(s):  
Narcis Anghel ◽  
Valentina Maria Dinu ◽  
Liliana Verestiuc ◽  
Irene Alexandra Spiridon
Keyword(s):  
Drug Delivery ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Metal Complex ◽  
Drug Delivery Systems ◽  
Delivery Systems ◽  
Fickian Diffusion ◽  
Mechanical Resistance ◽  
Natural Polymers ◽  
Transcutaneous Drug Delivery

Designing composites based on natural polymers has attracted attention for more than a decade due to the possibility to manufacture medical devices which are biocompatible with the human body. Herein, we present some biomaterials made up of collagen, polyurethane, and cellulose doped with lignin and lignin-metal complex, which served as transcutaneous drug delivery systems. Compared with base material, the compressive strength and the elastic modulus of biocomposites comprising lignin or lignin-metal complex were significantly enhanced; thus, the compressive strength increased from 61.37 to 186.5 kPa, while the elastic modulus increased from 0.828 to 1.928 MPa. The release of ketokonazole from the polymer matrix follows a Korsmeyer–Peppas type kinetics with a Fickian diffusion. All materials tested were shown to be active against pathogenic microorganisms. The mucoadhesiveness, bioadhesiveness, mechanical resistance, release kinetic, and antimicrobial activity make these biocomposites to be candidates as potential systems for controlled drug release.

scholarly journals A Universal Model for the Log-Normal Distribution of Elasticity in Polymeric Gels and Its Relevance to Mechanical Signature of Biological Tissues

Biology ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 64
Author(s):  
Arnaud Millet
Keyword(s):  
Elastic Modulus ◽  
Normal Distribution ◽  
Biological Tissues ◽  
Force Microscopy ◽  
Polymeric Gels ◽  
Atomic Force ◽  
Clear Explanation ◽  
Log Normal ◽  
Log Normal Distribution

The mechanosensitivity of cells has recently been identified as a process that could greatly influence a cell’s fate. To understand the interaction between cells and their surrounding extracellular matrix, the characterization of the mechanical properties of natural polymeric gels is needed. Atomic force microscopy (AFM) is one of the leading tools used to characterize mechanically biological tissues. It appears that the elasticity (elastic modulus) values obtained by AFM presents a log-normal distribution. Despite its ubiquity, the log-normal distribution concerning the elastic modulus of biological tissues does not have a clear explanation. In this paper, we propose a physical mechanism based on the weak universality of critical exponents in the percolation process leading to gelation. Following this, we discuss the relevance of this model for mechanical signatures of biological tissues.

scholarly journals Clay-Based Products Sustainable Development: Some Applications

2021 ◽  
Vol 13 (3) ◽  
pp. 1364
Author(s):  
Michele La Noce ◽  
Alessandro Lo Faro ◽  
Gaetano Sciuto
Keyword(s):  
Sustainable Development ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Basalt Fibers ◽  
Future Studies ◽  
Clay Bricks ◽  
Brick Powder ◽  
Alkaline Resistance ◽  
Raw Earth

Clay has a low environmental impact and can develop into many different products. The research presents two different case studies. In the first, the clay is the binder of raw earth doughs in order to produce clay-bricks. We investigate the effects of natural fibrous reinforcements (rice straws and basalt fibers) in four different mixtures. From the comparison with a mix without reinforcements, it is possible to affirm that the 0.40% of basalt fibers reduce the shrinkage by about 25% and increase the compressive strength by about 30%. Future studies will focus on identifying the fibrous effects on tensile strength and elastic modulus, as well as the optimal percentage of fibers. In the second study, the clay, in form of brick powder (“cocciopesto”), gives high alkaline resistance and breathability performance, as well as rendering and color to the plaster. The latter does not have artificial additives. The plaster respects the cultural instance of the original building. The research underlines how the use of a local (and traditional) material such as clay can be a promoter of sustainability in the contemporary building sector. Future studies must investigate further possible uses of clay as well as a proper regulatory framework.

Sign in / Sign up

Export Citation Format

Share Document