Fabrication, characterization, and adsorption applications of low-cost hybride activated carbons from peanut shell-vinasse mixtures by one-step pyrolysis

2021 ◽  
Author(s):  
Esra Arslanoğlu ◽  
Muhammet Ş. A. Eren ◽  
Hasan Arslanoğlu ◽  
Harun Çiftçi
Keyword(s):  
Activated Carbons ◽  
Low Cost ◽  
Peanut Shell ◽  
One Step

scholarly journals Facile preparation of porous biomass charcoal from peanut shell as adsorbent

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Suzhen Bai ◽  
Tiantian Wang ◽  
Zhengshan Tian ◽  
Kesheng Cao ◽  
Jitao Li
Keyword(s):  
Activated Carbons ◽  
Low Cost ◽  
Chemical Activation ◽  
Peanut Shell ◽  
Biomass Waste ◽  
Adsorptive Property ◽  
Environmental Friendliness ◽  
Synthetic Process ◽  
Removal Capacity ◽  
Hierarchical Porous

Abstract Activated carbons derived from biomass have been proved to be one of the most promising adsorbents due to their abundance, low cost, reproducibility and environmental friendliness. In this study, a simple, facile and effective pyrolysis method was demonstrated to prepare hierarchical porous biomass charcoal by using peanut shells as precursor without chemical activation in an electric muffle furnace. The obtained products hold porous structure and abundant oxygen-containing functional groups, which were mainly due to in-built template of the structure of peanut shell and the preparation process without nitrogen protection, respectively. Interestingly, the obtained biomass charcoal sample with excellent adsorptive property quickly removed Pb2+ (100 mg/L) and methylene blue (50 mg/L) from water with removal efficiency of 96.5% and 97.1%, and removal capacity of 48 mg/g and 24 mg/g, respectively. The synthetic process was simple and economical, and it could be used as a beneficial reference in the recycling of biomass waste.

Dual Nickel/Palladium-Catalyzed Reductive Cross-Coupling Reactions Between Two Phenol Derivatives

2020 ◽  
Author(s):  
Baojian Xiong ◽  
Yue Li ◽  
Yin Wei ◽  
Søren Kramer ◽  
Zhong Lian
Keyword(s):  
Functional Group ◽  
Low Cost ◽  
Cross Coupling ◽  
Coupling Reactions ◽  
Phenol Derivatives ◽  
Cross Coupling Reactions ◽  
Palladium Catalyzed ◽  
One Step ◽  
Aryl Tosylates ◽  
Low Sensitivity

Cross-coupling between substrates that can be easily derived from phenols is highly attractive due to the abundance and low cost of phenols. Here, we report a dual nickel/palladium-catalyzed reductive cross-coupling between aryl tosylates and aryl triflates; both substrates can be accessed in just one step from readily available phenols. The reaction has a broad functional group tolerance and substrate scope (>60 examples). Furthermore, it displays low sensitivity to steric effects demonstrated by the synthesis of a 2,2’disubstituted biaryl and a fully substituted aryl product. The widespread presence of phenols in natural products and pharmaceuticals allow for straightforward late-stage functionalization, illustrated with examples such as Ezetimibe and tyrosine. NMR spectroscopy and DFT calculations indicate that the nickel catalyst is responsible for activating the aryl triflate, while the palladium catalyst preferentially reacts with the aryl tosylate.

Surface Modification of Poly(Vinylchloride) for Manufacturing Advanced Catheters

2020 ◽  
Vol 27 (10) ◽  
pp. 1616-1633 ◽  
Author(s):  
Oana Cristina Duta ◽  
Aurel Mihail Ţîţu ◽  
Alexandru Marin ◽  
Anton Ficai ◽  
Denisa Ficai ◽  
...  
Keyword(s):  
Surface Modification ◽  
Chemical Modification ◽  
Medical Devices ◽  
Low Cost ◽  
Physical And Mechanical Properties ◽  
Polymeric Materials ◽  
Modern Medicine ◽  
Structural Failure ◽  
Chemical Grafting ◽  
One Step

Polymeric materials, due to their excellent physicochemical properties and versatility found applicability in multiples areas, including biomaterials used in tissue regeneration, prosthetics (hip, artificial valves), medical devices, controlled drug delivery systems, etc. Medical devices and their applications are very important in modern medicine and the need to develop new materials with improved properties or to improve the existent materials is increasing every day. Numerous reasearches are activated in this domain in order to obtain materials/surfaces that does not have drawbacks such as structural failure, calcifications, infections or thrombosis. One of the most used material is poly(vinylchloride) (PVC) due to its unique properties, availability and low cost. The most common method used for obtaining tubular devices that meet the requirements of medical use is the surface modification of polymers without changing their physical and mechanical properties, in bulk. PVC is a hydrophobic polymer and therefore many research studies were conducted in order to increase the hydrophilicity of the surface by chemical modification in order to improve biocompatibility, to enhance wettability, reduce friction or to make lubricious or antimicrobial coatings. Surface modification of PVC can be achieved by several strategies, in only one step or, in some cases, in two or more steps by applying several techniques consecutively to obtain the desired modification / performances. The most common processes used for modifying the surface of PVC devices are: plasma treatment, corona discharge, chemical grafting, electric discharge, vapour deposition of metals, flame treatment, direct chemical modification (oxidation, hydrolysis, etc.) or even some physical modification of the roughness of the surface.

scholarly journals Development of a simplified gas ultracleaning process: experiments in biomass residue-based fixed-bed gasification syngas

2021 ◽  
Author(s):  
Christian Frilund ◽  
Esa Kurkela ◽  
Ilkka Hiltunen
Keyword(s):  
Activated Carbons ◽  
Low Cost ◽  
Fixed Bed ◽  
Carbonyl Sulfide ◽  
Gas Analysis ◽  
Small Scale ◽  
Cleaning Process ◽  
Medium Temperature ◽  
Gas Cleaning ◽  
Adsorption Affinity

AbstractFor the realization of small-scale biomass-to-liquid (BTL) processes, low-cost syngas cleaning remains a major obstacle, and for this reason a simplified gas ultracleaning process is being developed. In this study, a low- to medium-temperature final gas cleaning process based on adsorption and organic solvent-free scrubbing methods was coupled to a pilot-scale staged fixed-bed gasification facility including hot filtration and catalytic reforming steps for extended duration gas cleaning tests for the generation of ultraclean syngas. The final gas cleaning process purified syngas from woody and agricultural biomass origin to a degree suitable for catalytic synthesis. The gas contained up to 3000 ppm of ammonia, 1300 ppm of benzene, 200 ppm of hydrogen sulfide, 10 ppm of carbonyl sulfide, and 5 ppm of hydrogen cyanide. Post-run characterization displayed that the accumulation of impurities on the Cu-based deoxygenation catalyst (TOS 105 h) did not occur, demonstrating that effective main impurity removal was achieved in the first two steps: acidic water scrubbing (AWC) and adsorption by activated carbons (AR). In the final test campaign, a comprehensive multipoint gas analysis confirmed that ammonia was fully removed by the scrubbing step, and benzene and H2S were fully removed by the subsequent activated carbon beds. The activated carbons achieved > 90% removal of up to 100 ppm of COS and 5 ppm of HCN in the syngas. These results provide insights into the adsorption affinity of activated carbons in a complex impurity matrix, which would be arduous to replicate in laboratory conditions.

scholarly journals Synthesis of catalysts with fine platinum particles supported by high-surface-area activated carbons and optimization of their catalytic activities for polymer electrolyte fuel cells

RSC Advances ◽  
2021 ◽  
Vol 11 (33) ◽  
pp. 20601-20611
Author(s):  
Md. Mijanur Rahman ◽  
Kenta Inaba ◽  
Garavdorj Batnyagt ◽  
Masato Saikawa ◽  
Yoshiki Kato ◽  
...  
Keyword(s):  
Fuel Cells ◽  
Polymer Electrolyte ◽  
High Performance ◽  
Activated Carbons ◽  
Low Cost ◽  
High Surface ◽  
High Surface Area ◽  
Polymer Electrolyte Fuel Cells ◽  
Supported Platinum ◽  
Platinum Particles

Herein, we demonstrated that carbon-supported platinum (Pt/C) is a low-cost and high-performance electrocatalyst for polymer electrolyte fuel cells (PEFCs).

scholarly journals Novel BiOBr by compositing low-cost biochar for efficient ciprofloxacin removal: the synergy of adsorption and photocatalysis on the degradation kinetics and mechanism insight

RSC Advances ◽  
2021 ◽  
Vol 11 (25) ◽  
pp. 15369-15379
Author(s):  
Wandi Song ◽  
Jianghua Zhao ◽  
Xiuhong Xie ◽  
Wang Liu ◽  
Shuxia Liu ◽  
...  
Keyword(s):  
Synergistic Effect ◽  
Solvothermal Method ◽  
Degradation Kinetics ◽  
Low Cost ◽  
Kinetics And Mechanism ◽  
One Step ◽  
Ciprofloxacin Removal

1. The C-loaded BiOBr was synthesized via a one-step solvothermal method. 2. C/BiOBr showed an obvious synergistic effect of adsorption and photocatalysis on the degradation of ciprofloxacin.

EFFECT OF HYDROTHERMAL TIME ON THE GROWTH OF ZnO NANORODS

2020 ◽  
pp. 84-91
Author(s):  
Hanh
Keyword(s):  
Printed Circuit Board ◽  
Low Cost ◽  
Cell Structure ◽  
Zno Nanorods ◽  
Zinc Nitrate ◽  
Circuit Board ◽  
Nitrate Hexahydrate ◽  
Hydrothermal Time ◽  
One Step ◽  
Surface Morphologies

In this work, ZnO nanorods (NRs) were successfully grown on printed circuit board substrates (PCBs) by utilizing a one-step, seedless, low-cost hydrothermal method. It was shown that by implementing a galvanic cell structure in an aqueous solution of 80 mM of zinc nitrate hexahydrate and hexamethylenetetramine, ZnO NRs can directly grow on the PCBs substrate without the assistance of a seed layer. The effect of hydrothermal time on the surface morphologies, and the crystallinity of the as-grown ZnO nanorods (NRs) was also investigated. The as-grown ZnO NRs also exhibited a significant enhancement in vertical growth and their crystallinity with 5 hour growth.

scholarly journals Removal of Ni (II) from Aqueous Solution by Adsorption onto Activated Carbon Prepared from Lapsi (Choerospondias axillaris) Seed Stone

2014 ◽  
Vol 9 (1) ◽  
pp. 166-174 ◽  
Author(s):  
Rajeshwar M. Shrestha ◽  
Margit Varga ◽  
Imre Varga ◽  
Amar P. Yadav ◽  
Bhadra P. Pokharel ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Activated Carbons ◽  
Low Cost ◽  
Chemical Characterization ◽  
Maximum Adsorption Capacity ◽  
Adsorption Data ◽  
Optimum Ph ◽  
Nickel Adsorption

Activated carbons were prepared from Lapsi seed stone by the treatment with H2SO4 and HNO3 for the removal of Ni (II) ions from aqueous solution. Two activated carbon have been prepared from Lapsi seed stones by treating with conc.H2SO4 and a mixture of H2SO4 and HNO3 in the ratio of 1:1 by weight for removal of Ni(II) ions. Chemical characterization of the resultant activated carbons was studied by Fourier Transform Infrared Spectroscopy and Boehm titration which revealed the presence of oxygen containing surface functional groups like carboxyl, lactones and phenols in the carbons. The optimum pH for nickel adsorption is found to be 5. The adsorption data were better fitted with the Langmuir equations than Freundlich adsorption equation to describe the equilibrium isotherms. The maximum adsorption capacity of Ni (II) on the resultant activated carbons was 28.25.8 mg g-1 with H2SO4 and 69.49 mg g-1 with a mixture of H2SO4 and HNO3. The waste material used in the preparation of the activated carbons is inexpensive and readily available. Hence the carbons prepared from Lapsi seed stones can act as potential low cost adsorbents for the removal of Ni (II) from water. DOI: http://dx.doi.org/10.3126/jie.v9i1.10680Journal of the Institute of Engineering, Vol. 9, No. 1, pp. 166–174

Sign in / Sign up

Export Citation Format

Share Document