scholarly journals Montmorillonite-anchored magnetite nanocomposite for recovery of ammonium from stormwater and its reuse in adsorption of Sc3+

2021 ◽  
Vol 6 (3) ◽  
Author(s):  
Jianzhi Song ◽  
Varsha Srivastava ◽  
Tomas Kohout ◽  
Mika Sillanpää ◽  
Tuomo Sainio
Keyword(s):  
Electron Microscopy ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Selective Adsorption ◽  
Maximum Adsorption Capacity ◽  
Suitable Model ◽  
Transmission Electron ◽  
Adsorbent Surface ◽  
Langmuir Isotherm Model ◽  
Co Precipitation

AbstractThe treatment of stormwater to remove and recover nutrients has received increasing interest. The objective of this study was to develop a novel adsorbent that is easy to handle, has good adsorption capacity, and is economical to use. A novel nanocomposite of montmorillonite (MT)-anchored magnetite (Fe3O4) was synthesised by co-precipitation as an adsorbent for ammonium. The MT/Fe3O4 nanocomposite had pore sizes (3–13 nm) in the range of narrow mesopores. The dispersion of the anchored Fe3O4 was confirmed by transmission electron microscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy (XPS). The nanocomposite exhibited higher affinity towards ammonium than the original MT. The Langmuir isotherm model was found to be the most suitable model to explain the ammonium adsorption behaviour of the nanocomposite. The maximum adsorption capacity for ammonium was 10.48 mg/g. The adsorption mechanism was a combination of ion exchange and electrostatic interaction. In an authentic stormwater sample, the synthesised adsorbent removed 64.2% of ammonium and reduced the amount of heavy metal contaminants including Mn, Ni, Cu and Zn. Furthermore, the ammonium loading on MT/Fe3O4 during adsorption functionalised the adsorbent surface. Additionally, the spent nanocomposite showed potential for rare earth elements (REEs) adsorption as a secondary application, especially for the selective adsorption of Sc3+. The versatile application of montmorillonite-anchored magnetite nanocomposite makes it a promising adsorbent for water treatment. Graphic abstract

scholarly journals Preparation of ureido-functionalized PVA/silica mesoporous fibre membranes via electrospinning for adsorption of Pb2+ and Cu2+ in wastewater

2017 ◽  
Vol 76 (9) ◽  
pp. 2526-2534 ◽  
Author(s):  
Meimei Zhou ◽  
Weizhen Tang ◽  
Pingping Luo ◽  
Jiqiang Lyu ◽  
Aixia Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Adsorption Capacity ◽  
Freundlich Isotherm ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
Transmission Electron ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Adsorption Desorption

Abstract Ureido-functionalized mesoporous polyvinyl alcohol/silica composite nanofibre membranes were prepared by electrospinning technology and their application for removal of Pb2+ and Cu2+ from wastewater was discussed. The characteristics of the membranes were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and N2 adsorption-desorption analysis. Results show that the membranes have long fibrous shapes and worm-like mesoporous micromorphologies. Fourier transform infrared spectroscopy confirmed the membranes were successfully functionalized with ureido groups. Pb2+ and Cu2+ adsorption behavior on the membranes followed a pseudo-second-order nonlinear kinetic model with approximately 30 minutes to equilibrium. Pb2+ adsorption was modelled using a Langmuir isotherm model with maximum adsorption capacity of 26.96 mg g−1. However, Cu2+ adsorption was well described by a Freundlich isotherm model with poor adsorption potential due to the tendency to form chelating complexes with several ureido groups. Notably, the membranes were easily regenerated through acid treatment, and maintained adsorption capacity of 91.87% after five regeneration cycles, showing potential for applications in controlling heavy metals-related pollution and metals reuse.

scholarly journals Fabrication of Carboxymethylcellulose/Metal-Organic Framework Beads for Removal of Pb(II) from Aqueous Solution

Materials ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 942 ◽  
Author(s):  
Huo-Xi Jin ◽  
Hong Xu ◽  
Nan Wang ◽  
Li-Ye Yang ◽  
Yang-Guang Wang ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Langmuir Isotherm ◽  
Adsorption Equilibrium ◽  
Isotherm Model ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Metal Organic ◽  
Langmuir Isotherm Model

The ability to remove toxic heavy metals, such as Pb(II), from the environment is an important objective from both human-health and ecological perspectives. Herein, we describe the fabrication of a novel carboxymethylcellulose-coated metal organic material (MOF-5–CMC) adsorbent that removed lead ions from aqueous solutions. The adsorption material was characterized by Fourier-transform infrared spectroscopy, X-ray diffractometry, scanning electron microscopy, and X-ray photoelectron spectroscopy. We studied the functions of the contact time, pH, the original concentration of the Pb(II) solution, and adsorption temperature on adsorption capacity. MOF-5–CMC beads exhibit good adsorption performance; the maximum adsorption capacity obtained from the Langmuir isotherm-model is 322.58 mg/g, and the adsorption equilibrium was reached in 120 min at a concentration of 300 mg/L. The adsorption kinetics is well described by pseudo-second-order kinetics, and the adsorption equilibrium data are well fitted to the Langmuir isotherm model (R2 = 0.988). Thermodynamics experiments indicate that the adsorption process is both spontaneous and endothermic. In addition, the adsorbent is reusable. We conclude that MOF-5–CMC is a good adsorbent that can be used to remove Pb(II) from aqueous solutions.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

scholarly journals Facile Preparation of Rod-like MnO Nanomixtures via Hydrothermal Approach and Highly Efficient Removal of Methylene Blue for Wastewater Treatment

Nanomaterials ◽  
2018 ◽  
Vol 9 (1) ◽  
pp. 10 ◽  
Author(s):  
Yuelong Xu ◽  
Bin Ren ◽  
Ran Wang ◽  
Lihui Zhang ◽  
Tifeng Jiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Methylene Blue ◽  
Photoelectron Spectroscopy ◽  
Degradation Mechanism ◽  
Dye Adsorption ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Transmission Electron ◽  
Degradation Ratio ◽  
Hydrothermal Approach

In the present study, nanoscale rod-shaped manganese oxide (MnO) mixtures were successfully prepared from graphitic carbon nitride (C3N4) and potassium permanganate (KMnO4) through a hydrothermal method. The as-prepared MnO nanomixtures exhibited high activity in the adsorption and degradation of methylene blue (MB). The as-synthesized products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), surface area analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). Furthermore, the effects of the dose of MnO nanomixtures, pH of the solution, initial concentration of MB, and the temperature of MB removal in dye adsorption and degradation experiments was investigated. The degradation mechanism of MB upon treatment with MnO nanomixtures and H2O2 was studied and discussed. The results showed that a maximum adsorption capacity of 154 mg g−1 was obtained for a 60 mg L−1 MB solution at pH 9.0 and 25 °C, and the highest MB degradation ratio reached 99.8% under the following optimum conditions: 50 mL of MB solution (20 mg L−1) at room temperature and pH ≈ 8.0 with 7 mg of C, N-doped MnO and 0.5 mL of H2O2.

Adsorption of Crystal Violet oNto Nitrogen-Doped Mesoporous Carbon

2017 ◽  
Vol 42 (3) ◽  
pp. 269-281
Author(s):  
Lvling Zhong ◽  
Liang Zhang ◽  
Hongliang Shi
Keyword(s):  
Adsorption Capacity ◽  
Crystal Violet ◽  
Photoelectron Spectroscopy ◽  
Control Process ◽  
Maximum Adsorption Capacity ◽  
Nitrogen Doped ◽  
First Order Kinetics ◽  
Equilibrium Data ◽  
Langmuir Isotherm Model ◽  
Adsorption Desorption

A series of nitrogen-doped mesoporous carbons (NDMCs) was prepared using p-phenylenediamine and glyoxal as a carbon source and mesoporous silica as a hard template. N2 adsorption–desorption isotherms indicated that mesopores with a wider distribution exist in NDMCs. Elemental analysis showed that the N content on the surface of NDMC-800 was 9.9at.%, with a result close to 8.4at.% from X-ray photoelectron spectroscopy. The adsorption capacity of NDMCs for crystal violet (CV) in aqueous solution was investigated. Static equilibrium data were well described by the Langmuir isotherm model, with a maximum adsorption capacity of 243.9 mg g−1. Adsorption kinetics data suggested that the adsorption control process follows the pseudo first-order kinetics model. The results showed that this carbon material has the potential for application in adsorption of CV.

Synthesis of magnetic biochar derived from cotton stalks for the removal of Cr(VI) from aqueous solution

2019 ◽  
Vol 79 (11) ◽  
pp. 2106-2115 ◽  
Author(s):  
Fengfeng Ma ◽  
Baowei Zhao ◽  
Jingru Diao
Keyword(s):  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Batch Adsorption ◽  
Maximum Adsorption Capacity ◽  
Cotton Stalk ◽  
Magnetic Biochar ◽  
X Ray ◽  
Cotton Stalks ◽  
Pseudo Second Order ◽  
Co Precipitation

Abstract A magnetic cotton stalk biochar (MCSBC) was synthesized through chemical co-precipitation, based on cotton stalk biochar (CSBC). The MCSBC and CSBC were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy and vibrating sample magnetometry. The characterization analyses showed that the magnetization process endowed the CSBC with excellent magnetic properties with a superparamagnetic magnetization of 27.59 emu/g. Batch adsorption experiment results indicated that the Cr(VI) maximum adsorption capacity of MCSBC was 20.05 mg/g, which was higher than that of CSBC (18.77 mg/g). The adsorption kinetic data were well fitted by the pseudo-second-order model and the adsorption isotherms were well represented by the Sips isotherm model. The thermodynamic studies indicated that the adsorption process was spontaneous and endothermic, and the entropy increased. The potential adsorption mechanism was the electrostatic adsorption of anionic Cr(VI) to the positively charged MCSBC surface, the reduction of Cr(VI) into Cr(III) and the complexation of Cr(III) by oxygen-containing functional groups of MCSBC. The regeneration studies showed that MCSBC kept 80% of its initial Cr(VI) adsorption capacity in the cycle. All the findings suggest that this novel magnetic biochar could be used in the field of Cr(VI)-containing wastewater treatment.

scholarly journals Removal of Arsenite from Water by Ce-Al-Fe Trimetal Oxide Adsorbent: Kinetics, Isotherms, and Thermodynamics

2016 ◽  
Vol 2016 ◽  
pp. 1-8 ◽  
Author(s):  
Cuizhen Sun ◽  
Jinwei Qiu ◽  
Zhibin Zhang ◽  
Taha F. Marhaba ◽  
Yanhao Zhang
Keyword(s):  
Adsorption Capacity ◽  
Standard Free Energy ◽  
Entropy Change ◽  
Maximum Adsorption Capacity ◽  
Transmission Electron ◽  
Adsorbent Surface ◽  
Adsorption Mode ◽  
Freundlich Adsorption Isotherm ◽  
Pseudo Second Order ◽  
Isotherms And Thermodynamics

Ce-Al-Fe trimetal oxide adsorbent was prepared. The morphology characteristics of the new adsorbent were analysed by the transmission electron microscope (SEM) method. The SEM results implied its ability in the adsorption of As (III). To verify the analyses, bench-scale experiments were performed for the removal of As (III) from water. In the experiments of adsorption, As (III) adsorption capacity of the trimetal oxide adsorbent was presented significantly higher than activated aluminium oxide and activated carbon. As (III) adsorption kinetics resembled pseudo-second-order adsorption mode. When initial As (III) concentration was 3, 8, and 10 mg·L−1, the maximum adsorption capacity achieved was 1.48, 3.73, and 5.12 mg·g−1, respectively. In addition, the experimental adsorption data were described well by the Freundlich adsorption isotherm model at 20, 30, and 40°C. The enthalpy change(ΔS), the standard free energy(ΔG), and entropy change(ΔH)indicated that the nature of As (III) adsorption was exothermic and spontaneous with increasing randomness on the interface of solid and liquid. And the adsorption mechanism can be interpreted as chemisorption with As (III) multilayer coverage formation on the adsorbent surface.

A novel iron modified montmorillonite composite and its enhanced performance for tetracycline hydrochloride adsorption

2019 ◽  
Vol 12 (02) ◽  
pp. 1950014 ◽  
Author(s):  
Wei Yang ◽  
Sheng Guo ◽  
Jinyi Chen ◽  
Abdul Naeem ◽  
Hussain Fida ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Adsorption Capacity ◽  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Interlayer Spacing ◽  
Tetracycline Hydrochloride ◽  
Maximum Adsorption Capacity ◽  
X Ray ◽  
Modified Montmorillonite ◽  
Wide Ph Range

Iron-modified montmorillonite (Mt) composites with controlled interlayer spacing were successfully synthesized through Fenton-like process with the addition of different concentrations of Rhodamine B (RhB). The physicochemical properties of the resulting samples were characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). It was worth noting that the adsorption efficiency of the composite for tetracycline hydrochloride (TC) increased with the increase of the RhB concentration during preparation. The maximum adsorption capacity of the as-prepared composite toward TC was 192.4[Formula: see text]mg/g, which was much higher than that of the Mt (144.9[Formula: see text]mg/g). Moreover, the as-prepared adsorbent showed high adsorption capacity of TC in a wide pH range of 3.0–9.0. The adsorption process followed the pseudo-second-order equation and the Langmuir isotherm model, suggesting the mono-layer chemisorption of the adsorption process. The present work may provide a new strategy for the design and fabrication of functional clay-based materials.

Study on Electrospun-Membrane-Based Filter to Rapidly Remove Reactive Yellow 2 from Wastewater

2013 ◽  
Vol 726-731 ◽  
pp. 707-711
Author(s):  
Wen Peng Zhang ◽  
Da Yong Wu ◽  
Ya Kun Wang
Keyword(s):  
Electron Microscopy ◽  
Mesoporous Silica ◽  
Adsorption Capacity ◽  
Temperature Treatment ◽  
High Temperature Treatment ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Electrospun Membrane ◽  
Transmission Electron ◽  
Prepared Material

Uniform highly ordered mesoporous silica nanofiber membrane was successfully prepared onto copper mesh via coaxial electrospinning combining with the solvent evaporation and extraction induced surfactant assembly process. After a high temperature treatment and amination, it was employed to remove reactive yellow 2 (RY2) in wastewater showing remarkable adsorption capacity. The maximum adsorption capacity can reach up to 371.7 mg/g. The structural properties of synthesized mesoporous silica were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Fourier transform infrared spectrum (FTIR). And the adsorption behavior of prepared material was analyzed through three kinds of isotherm models.

scholarly journals Gum Arabic-Magnetite Nanocomposite as an Eco-Friendly Adsorbent for Removal of Lead(II) Ions from Aqueous Solutions: Equilibrium, Kinetic and Thermodynamic Studies

Separations ◽  
2021 ◽  
Vol 8 (11) ◽  
pp. 224
Author(s):  
Ismat H. Ali ◽  
Mutasem Z. Bani-Fwaz ◽  
Adel A. El-Zahhar ◽  
Riadh Marzouki ◽  
Mosbah Jemmali ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Aqueous Solutions ◽  
Contact Time ◽  
Gum Arabic ◽  
Ion Concentration ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
Transmission Electron ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model

In this study, a gum Arabic-magnetite nanocomposite (GA/MNPs) was synthesized using the solution method. The prepared nanocomposite was characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and thermogravimetric analysis (TGA). The prepared composite was evaluated for the adsorption of lead(II) ions from aqueous solutions. The controlling factors such as pH, contact time, adsorbent dose, initial ion concentration, and temperature were investigated. The optimum adsorption conditions were found to be 0.3 g/50 mL, pH = 6.00, and contact time of 30 min. The experimental data well fitted the pseudo-second-order kinetic model and the Langmuir isotherm model. The maximum adsorption capacity was determined as 50.5 mg/g. Thermodynamic parameters were calculated postulating an endothermic and spontaneous process and a physio-sorption pathway.

Sign in / Sign up

Export Citation Format

Share Document