In-situ amino-functionalization of zeolitic imidazolate frameworks for high-efficiency capture of low-concentration CO2 from flue gas

Fuel ◽  
2021 ◽  
Vol 298 ◽  
pp. 120875
Author(s):  
Shi Lijuan ◽  
Qi Kai ◽  
Wu Haonan ◽  
Li Jie ◽  
Qiu Mingyue ◽  
...  
Keyword(s):  
Flue Gas ◽  
High Efficiency ◽  
Zeolitic Imidazolate Frameworks ◽  
Low Concentration ◽  
Amino Functionalization

scholarly journals Influence of Casting Solvents on CO2/CH4 Separation Using Polysulfone Membranes

Membranes ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 286
Author(s):  
Roba M. Almuhtaseb ◽  
Ahmed Awadallah-F ◽  
Shaheen A. Al-Muhtaseb ◽  
Majeda Khraisheh
Keyword(s):  
High Efficiency ◽  
In Situ Synthesis ◽  
Separation Process ◽  
Polymeric Membranes ◽  
Gas Mixture ◽  
Manufacturing Cost ◽  
Binary Gas Mixture ◽  
Maximum Permeability ◽  
Polysulfone Membranes

Polysulfone membranes exhibit resistance to high temperature with low manufacturing cost and high efficiency in the separation process. The composition of gases is an important step that estimates the efficiency of separation in membranes. As membrane types are currently becoming in demand for CO2/CH4 segregation, polysulfone will be an advantageous alternative to have in further studies. Therefore, research is undertaken in this study to evaluate two solvents: chloroform (CF) and tetrahydrofuran (THF). These solvents are tested for casting polymeric membranes from polysulfone (PSF) to separate every single component from a binary gas mixture of CO2/CH4. In addition, the effect of gas pressure was conducted from 1 to 10 bar on the behavior of the permeability and selectivity. The results refer to the fact that the maximum permeability of CO2 and CH4 for THF is 62.32 and 2.06 barrer at 1 and 2 bars, respectively. Further, the maximum permeability of CF is 57.59 and 2.12 barrer at 1 and 2 bars, respectively. The outcome selectivity values are 48 and 36 for THF and CF at 1 bar, accordingly. Furthermore, the study declares that with the increase in pressure, the permeability and selectivity values drop for CF and THF. The performance for polysulfone (PSF) membrane that is manufactured with THF is superior to that of CF relative to the Robeson upper bound. Therefore, through the results, it can be deduced that the solvent during in-situ synthesis has a significant influence on the gas separation of a binary mixture of CO2/CH4.

Formation and in-situ dissociation of particulate arsenic in the zinc-containing flue gas from nonferrous metallurgy

2021 ◽  
Vol 266 ◽  
pp. 118575
Author(s):  
Wenming Yao ◽  
Xiaobo Min ◽  
Qingzhu Li ◽  
Kaizhong Li ◽  
Shengli Qu ◽  
...  
Keyword(s):  
Flue Gas ◽  
Nonferrous Metallurgy

scholarly journals Start-up Strategies for Anaerobic Ammonia Oxidation (Anammox) in In-Situ Nitrogen Removal from Polluted Groundwater in Rare Earth Mining Areas

2021 ◽  
Vol 13 (8) ◽  
pp. 4591
Author(s):  
Shuanglei Huang ◽  
Daishe Wu
Keyword(s):  
Rare Earth ◽  
Low Temperature ◽  
Removal Efficiency ◽  
Nitrogen Removal ◽  
Ex Situ ◽  
High Concentration ◽  
Low Concentration ◽  
Start Up ◽  
Anammox Activity

The tremendous input of ammonium and rare earth element (REE) ions released by the enormous consumption of (NH4)2SO4 in in situ leaching for ion-adsorption RE mining caused serious ground and surface water contamination. Anaerobic ammonium oxidation (anammox) was a sustainable in situ technology that can reduce this nitrogen pollution. In this research, in situ, semi in situ, and ex situ method of inoculation that included low-concentration (0.02 mg·L−1) and high-concentration (0.10 mg·L−1) lanthanum (La)(III) were adopted to explore effective start-up strategies for starting up anammox reactors seeded with activated sludge and anammox sludge. The reactors were refrigerated for 30 days at 4 °C to investigate the effects of La(III) during a period of low-temperature. The results showed that the in situ and semi in situ enrichment strategies with the addition of La(III) at a low-concentration La(III) addition (0.02 mg·L−1) reduced the length of time required to reactivate the sludge until it reached a state of stable anammox activity and high nitrogen removal efficiency by 60–71 days. The addition of La(III) promoted the formation of sludge floc with a compact structure that enabled it to resist the adverse effects of low temperature and so to maintain a high abundance of AnAOB and microbacterial community diversity of sludge during refrigeration period. The addition of La(III) at a high concentration caused the cellular percentage of AnAOB to decrease from 54.60 ± 6.19% to 17.35 ± 6.69% during the enrichment and reduced nitrogen removal efficiency to an unrecoverable level to post-refrigeration.

Study on Mechanical Automation with Design of Rapid Milk Detector Based on Freezing Point

2013 ◽  
Vol 703 ◽  
pp. 282-286
Author(s):  
Ren Cai Zhang ◽  
Xiang Yu ◽  
Xing Ju Liu ◽  
Jin Hai Zhai ◽  
Zhen Wu Ning
Keyword(s):  
Integrated Circuit ◽  
Temperature Sensor ◽  
High Efficiency ◽  
Freezing Point ◽  
Electronic Control ◽  
Freezing Point Depression ◽  
Electronic Control System ◽  
Freezing Curve ◽  
Rack Mechanism

An efficient automated milk detector based on freezing point depression is designed. This detector shares characters of high efficiency and good stability with accuracy and automation. Its main parts include temperature sensor of IC (Integrated Circuit), pinion-rack mechanism and crank-rocker mechanism and electronic control system. Monitoring in-situ change of milk freezing curve and developing efficiency of sampling can be available by means of pinion-rack mechanism and IC temperature sensor mechatronics design. As a result, adulterating status of milk can be discriminated in a rapid and accurate and automated way. The detector may be employed to detect liquid foods other than milk as well.

Separation of phenols from oils using deep eutectic solvents and ionic liquids

2020 ◽  
Vol 92 (10) ◽  
pp. 1717-1731
Author(s):  
Yucui Hou ◽  
Zhi Feng ◽  
Jaime Ruben Sossa Cuellar ◽  
Weize Wu
Keyword(s):  
Ionic Liquids ◽  
Phenolic Compounds ◽  
High Efficiency ◽  
Deep Eutectic Solvents ◽  
Environmentally Benign ◽  
Organic Chemical ◽  
Environmental Friendliness ◽  
Oil Mixtures ◽  
Organic Chemical Industry

AbstractPhenolic compounds are important basic materials for the organic chemical industry, such as pesticides, medicines and preservatives. Phenolic compounds can be obtained from biomass, coal and petroleum via pyrolysis and liquefaction, but they are mixtures in oil. The traditional methods to separate phenols from oil using alkaline washing are not environmentally benign. To solve the problems, deep eutectic solvents (DESs) and ionic liquids (ILs) have been developed to separate phenols from oil, which shows high efficiency and environmental friendliness. In this article, we summarized the properties of DESs and ILs and the applications of DESs and ILs in the separation of phenols and oil. There are two ways in which DESs and ILs are used in these applications: (1) DESs formed in situ using different hydrogen bonding acceptors including quaternary ammonium salts, zwitterions, imidazoles and amides; (2) DESs and ILs used as extractants. The effect of water on the separation, mass transfer dynamics in the separation process, removal of neutral oil entrained in DESs, phase diagrams of phenol + oil + extractant during extraction, are also discussed. In the last, we analyze general trends for the separation and evaluate the problematic or challenging aspects in the separation of phenols from oil mixtures.

Construction of Z-Scheme Bi3TaO7/Zn0.5Cd0.5S composites with high-efficiency for levofloxacin degradation under visible light irradiation

2021 ◽  
Author(s):  
Jingjing Xu ◽  
Yang liu ◽  
xueping li ◽  
Mindong Chen
Keyword(s):  
Visible Light ◽  
Hydrothermal Method ◽  
Visible Light Irradiation ◽  
High Efficiency ◽  
Light Irradiation ◽  
In Situ Growth ◽  
Composite Photocatalysts ◽  
Photocatalytic Activities

Direct Z-scheme Bi3TaO7/Zn0.5Cd0.5S composite photocatalysts were successfully prepared via an in-situ growth hydrothermal method. The photocatalytic activities of composites were investigated by the degradation of levofloxacin under visible light. And...

Sign in / Sign up

Export Citation Format

Share Document