A combination strategy of functionalized polymer coating with Ta ion implantation for multifunctional and biodegradable vascular stents

The defect microstructures of Si arising from ion implantation and subsequent regrowth for a (111) substrate have been found to be dominated by microtwins. Figure 1(a) is a typical diffraction pattern of annealed ion-implanted (111) Si showing two groups of extra diffraction spots; one at positions (m, n integers), the other at adjacent positions between <000> and <220>. The object of the present paper is to show that these extra reflections are a direct consequence of the microtwins in the material.

Download Full-text

Interlayer mixing in GaAs/AlxGa1-xAs heterostructures as a result of Se+ ion implantation

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100106600 ◽

1988 ◽

Vol 46 ◽

pp. 908-909

Author(s):

E.G. Bithell ◽

W.M. Stobbs

Keyword(s):

Ion Implantation ◽

Diffusion Coefficients ◽

Dark Field ◽

Atomic Mass ◽

Composition Profile ◽

Semiconductor Heterostructures ◽

Transmission Electron ◽

Microscope Images ◽

Damage Process ◽

Electron Energy Loss

It is well known that the microstructural consequences of the ion implantation of semiconductor heterostructures can be severe: amorphisation of the damaged region is possible, and layer intermixing can result both from the original damage process and from the enhancement of the diffusion coefficients for the constituents of the original composition profile. A very large number of variables are involved (the atomic mass of the target, the mass and energy of the implant species, the flux and the total dose, the substrate temperature etc.) so that experimental data are needed despite the existence of relatively well developed models for the implantation process. A major difficulty is that conventional techniques (e.g. electron energy loss spectroscopy) have inadequate resolution for the quantification of any changes in the composition profile of fine scale multilayers. However we have demonstrated that the measurement of 002 dark field intensities in transmission electron microscope images of GaAs / AlxGa1_xAs heterostructures can allow the measurement of the local Al / Ga ratio.

Download Full-text

Dynamic studies of silicide-mediated crystallization of amorphous silicon

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100131395 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1352-1353

Author(s):

C. Hayzelden ◽

J. L. Batstone

Keyword(s):

Ion Implantation ◽

Solid Phase ◽

Metallic Phase ◽

Single Crystal Substrate ◽

Free Electrons ◽

Melt Temperature ◽

Transmission Electron ◽

Crystal Substrate ◽

High Resolution Tem

Epitaxial reordering of amorphous Si(a-Si) on an underlying single-crystal substrate occurs well below the melt temperature by the process of solid phase epitaxial growth (SPEG). Growth of crystalline Si(c-Si) is known to be enhanced by the presence of small amounts of a metallic phase, presumably due to an interaction of the free electrons of the metal with the covalent Si bonds near the growing interface. Ion implantation of Ni was shown to lower the crystallization temperature of an a-Si thin film by approximately 200°C. Using in situ transmission electron microscopy (TEM), precipitates of NiSi2 formed within the a-Si film during annealing, were observed to migrate, leaving a trail of epitaxial c-Si. High resolution TEM revealed an epitaxial NiSi2/Si(l11) interface which was Type A. We discuss here the enhanced nucleation of c-Si and subsequent silicide-mediated SPEG of Ni-implanted a-Si.Thin films of a-Si, 950 Å thick, were deposited onto Si(100) wafers capped with 1000Å of a-SiO2. Ion implantation produced sharply peaked Ni concentrations of 4×l020 and 2×l021 ions cm−3, in the center of the films.

Download Full-text

Analysis of Silicon-On-Insulator Structures Formed By Oxygen Ion Implantation

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100118370 ◽

1985 ◽

Vol 43 ◽

pp. 300-301

Author(s):

N. Lewis ◽

E. L. Hall ◽

A. Mogro-Campero ◽

R. P. Love

Keyword(s):

Ion Implantation ◽

Single Crystal ◽

Single Crystal Silicon ◽

Silicon Layer ◽

Device Fabrication ◽

Silicon On Insulator ◽

High Dose ◽

Crystal Silicon ◽

Oxygen Ion ◽

Oxygen Ion Implantation

The formation of buried oxide structures in single crystal silicon by high-dose oxygen ion implantation has received considerable attention recently for applications in advanced electronic device fabrication. This process is performed in a vacuum, and under the proper implantation conditions results in a silicon-on-insulator (SOI) structure with a top single crystal silicon layer on an amorphous silicon dioxide layer. The top Si layer has the same orientation as the silicon substrate. The quality of the outermost portion of the Si top layer is important in device fabrication since it either can be used directly to build devices, or epitaxial Si may be grown on this layer. Therefore, careful characterization of the results of the ion implantation process is essential.

Download Full-text

Layered and ion implantation specimens as possible reference materials for the electron-probe microanalysis

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100132893 ◽

1992 ◽

Vol 50 (2) ◽

pp. 1652-1653

Author(s):

G. Remond ◽

R.H. Packwood ◽

C. Gilles ◽

S. Chryssoulis

Keyword(s):

Ion Implantation ◽

Reference Materials ◽

Analytical Techniques ◽

Thin Film Deposition ◽

Film Deposition ◽

X Ray ◽

Spatially Resolved ◽

Analytical Expressions ◽

Original Approach ◽

Depth Concentration

Merits and limitations of layered and ion implanted specimens as possible reference materials to calibrate spatially resolved analytical techniques are discussed and illustrated for the case of gold analysis in minerals by means of x-ray spectrometry with the EPMA. To overcome the random heterogeneities of minerals, thin film deposition and ion implantation may offer an original approach to the manufacture of controlled concentration/ distribution reference materials for quantification of trace elements with the same matrix as the unknown.In order to evaluate the accuracy of data obtained by EPMA we have compared measured and calculated x-ray intensities for homogeneous and heterogeneous specimens. Au Lα and Au Mα x-ray intensities were recorded at various electron beam energies, and hence at various sampling depths, for gold coated and gold implanted specimens. X-ray intensity calculations are based on the use of analytical expressions for both the depth ionization Φ (ρz) and the depth concentration C (ρz) distributions respectively.

Download Full-text

The Effects of Ion Implantation on the Surface Features of Inconel 600

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100118333 ◽

1985 ◽

Vol 43 ◽

pp. 288-289

Author(s):

John D. Rubio

Keyword(s):

Grain Boundary ◽

Ion Implantation ◽

Nuclear Power ◽

Power Plants ◽

Surface Region ◽

Selective Dissolution ◽

Boundary Region ◽

Near Surface ◽

Inconel 600 ◽

Steam Generator Tubing

The degradation of steam generator tubing at nuclear power plants has become an important problem for the electric utilities generating nuclear power. The material used for the tubing, Inconel 600, has been found to be succeptible to intergranular attack (IGA). IGA is the selective dissolution of material along its grain boundaries. The author believes that the sensitivity of Inconel 600 to IGA can be minimized by homogenizing the near-surface region using ion implantation. The collisions between the implanted ions and the atoms in the grain boundary region would displace the atoms and thus effectively smear the grain boundary.To determine the validity of this hypothesis, an Inconel 600 sample was implanted with 100kV N2+ ions to a dose of 1x1016 ions/cm2 and electrolytically etched in a 5% Nital solution at 5V for 20 seconds. The etched sample was then examined using a JEOL JSM25S scanning electron microscope.

Download Full-text

Analytical Electron Microscopy of Ion-Implanted Metals

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s042482010011831x ◽

1985 ◽

Vol 43 ◽

pp. 282-285

Author(s):

D.I. Potter ◽

M. Ahmed ◽

K. Ruffing

Keyword(s):

Electron Microscopy ◽

Ion Implantation ◽

Friction And Wear ◽

Analytical Electron Microscopy ◽

Chemical Compositions ◽

Surface Chemical ◽

Near Surface ◽

The Past ◽

Analytical Electron ◽

Property Changes

Ion implantation, used extensively for the past decade in fabricating semiconductor devices, now provides a unique means for altering the near-surface chemical compositions and microstructures of metals. These alterations often significantly improve physical properties that depend on the surface of the material; for example, catalysis, corrosion, oxidation, hardness, friction and wear. Frequently the mechanisms causing these beneficial alterations and property changes remain obscure and much of the current research in the area of ion implantation metallurgy is aimed at identifying such mechanisms. Investigators thus confront two immediate questions: To what extent is the chemical composition changed by implantation? What is the resulting microstructure? These two questions can be investigated very fruitfully with analytical electron microscopy (AEM), as described below.

Download Full-text

TEM study of buried cobalt disilicide layers formed by ion implantation: Identification of cobalt monosilicide inclusions

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100176010 ◽

1990 ◽

Vol 48 (4) ◽

pp. 576-577

Author(s):

A. De Veirman ◽

J. Van Landuyt ◽

K.J. Reeson ◽

R. Gwilliam ◽

C. Jeynes ◽

...

Keyword(s):

Ion Implantation ◽

Annealing Treatment ◽

Silicon On Insulator ◽

High Dose ◽

Nitrogen Flow ◽

Cobalt Disilicide ◽

Transmission Electron ◽

Beam Heating ◽

Co Concentration ◽

Silicon On Insulator Technology

In analogy to the formation of SIMOX (Separation by IMplanted OXygen) material which is presently the most promising silicon-on-insulator technology, high-dose ion implantation of cobalt in silicon is used to synthesise buried CoSi2 layers. So far, for high-dose ion implantation of Co in Si, only formation of CoSi2 is reported. In this paper it will be shown that CoSi inclusions occur when the stoichiometric Co concentration is exceeded at the peak of the Co distribution. 350 keV Co+ ions are implanted into (001) Si wafers to doses of 2, 4 and 7×l017 per cm2. During the implantation the wafer is kept at ≈ 550°C, using beam heating. The subsequent annealing treatment was performed in a conventional nitrogen flow furnace at 1000°C for 5 to 30 minutes (FA) or in a dual graphite strip annealer where isochronal 5s anneals at temperatures between 800°C and 1200°C (RTA) were performed. The implanted samples have been studied by means of Rutherford Backscattering Spectroscopy (RBS) and cross-section Transmission Electron Microscopy (XTEM).

Download Full-text

Vascular stents

Current Problems in Surgery ◽

10.1016/s0011-3840(99)80007-0 ◽

1999 ◽

Vol 36 (12) ◽

pp. 909-1053

Author(s):

M AMATTOS ◽

K HODGSON ◽

S HURLBERT ◽

J HENRETTA ◽

Y STERNBACH ◽

...

Keyword(s):

Vascular Stents

Download Full-text