Effect of combined pulsed electric energy and high pressure homogenization on selective and energy efficient extraction of bio-molecules from microalga Parachlorella kessleri

LWT ◽  
2021 ◽  
Vol 141 ◽  
pp. 110901
Author(s):  
Rui Zhang ◽  
Luc Marchal ◽  
Eugène Vorobiev ◽  
Nabil Grimi
Keyword(s):  
High Pressure ◽  
Energy Efficient ◽  
Electric Energy ◽  
High Pressure Homogenization ◽  
Parachlorella Kessleri ◽  
Efficient Extraction

Sewage sludge solubilization by high-pressure homogenization

2013 ◽  
Vol 67 (11) ◽  
pp. 2399-2405 ◽  
Author(s):  
Yuxuan Zhang ◽  
Panyue Zhang ◽  
Jianbin Guo ◽  
Weifang Ma ◽  
Wei Fang ◽  
...  
Keyword(s):  
High Pressure ◽  
Energy Efficient ◽  
Suspended Solids ◽  
Oxygen Demand ◽  
Operating Conditions ◽  
High Pressure Homogenization ◽  
Sludge Sample ◽  
Cycle Number ◽  
Soluble Chemical Oxygen Demand ◽  
Solids Content

The behavior of sludge solubilization using high-pressure homogenization (HPH) treatment was examined by investigating the sludge solid reduction and organics solubilization. The sludge volatile suspended solids (VSS) decreased from 10.58 to 6.67 g/L for the sludge sample with a total solids content (TS) of 1.49% after HPH treatment at a homogenization pressure of 80 MPa with four homogenization cycles; total suspended solids (TSS) correspondingly decreased from 14.26 to 9.91 g/L. About 86.15% of the TSS reduction was attributed to the VSS reduction. The increase of homogenization pressure from 20 to 80 MPa or homogenization cycle number from 1 to 4 was favorable to the sludge organics solubilization, and the protein and polysaccharide solubilization linearly increased with the soluble chemical oxygen demand (SCOD) solubilization. More proteins were solubilized than polysaccharides. The linear relationship between SCOD solubilization and VSS reduction had no significant change under different homogenization pressures, homogenization cycles and sludge solid contents. The SCOD of 1.65 g/L was solubilized for the VSS reduction of 1.00 g/L for the three experimental sludge samples with a TS of 1.00, 1.49 and 2.48% under all HPH operating conditions. The energy efficiency results showed that the HPH treatment at a homogenization pressure of 30 MPa with a single homogenization cycle for the sludge sample with a TS of 2.48% was the most energy efficient.

High-Pressure Homogenization Alters Physicochemical Properties and In Vitro Digestibility of Chinese Yam (Dioscorea Opposita Thunb.) Starch

2018 ◽  
Vol 18 (1) ◽  
pp. 10-15
Author(s):  
Wang Yi-Wei ◽  
He Yong-Zhao ◽  
An Feng-Ping ◽  
Huang Qun ◽  
Zeng Feng ◽  
...  
Keyword(s):  
High Pressure ◽  
Physicochemical Properties ◽  
Starch Content ◽  
In Vitro Digestibility ◽  
High Pressure Homogenization ◽  
Starch Granules ◽  
Cross Polarization ◽  
Chinese Yam ◽  
Crystal Type

In this study, Chinese yam starch-water suspension (8%) were subjected to high-pressure homogenization (HPH) at 100 MPa for increasing cycle numbers, and its effect of on the physicochemical properties of the starch was investigated. Results of the polarizing microscope observations showed that the starch granules were disrupted (i.e. greater breakdown value) after HPH treatment, followed by a decrease in cross polarization. After three HPH cycles, the crystallinity of starch decreased, while the crystal type remained unaltered. Meanwhile, the contents of rapidly digestible starch and slowly digestible starch were increased. On the contrary, resistant starch content was decreased. Our results indicate that HPH treatment resulted in reduction of starch crystallinity and increase of starch digestibility.

scholarly journals Cavitation patterns in high-pressure homogenization nozzles with cylindrical orifices: Influence of mixing stream in Simultaneous Homogenization and Mixing

2021 ◽  
Author(s):  
V. Gall ◽  
E. Rütten ◽  
H. P. Karbstein
Keyword(s):  
High Pressure ◽  
Process Design ◽  
High Speed ◽  
State Of The Art ◽  
Back Pressure ◽  
High Pressure Homogenization ◽  
Unit Operation ◽  
Mixing Chamber ◽  
Cavitation Intensity ◽  
Droplet Sizes

AbstractHigh-pressure homogenization is the state of the art to produce high-quality emulsions with droplet sizes in the submicron range. In simultaneous homogenization and mixing (SHM), an additional mixing stream is inserted into a modified homogenization nozzle in order to create synergies between the unit operation homogenization and mixing. In this work, the influence of the mixing stream on cavitation patterns after a cylindrical orifice is investigated. Shadow-graphic images of the cavitation patterns were taken using a high-speed camera and an optically accessible mixing chamber. Results show that adding the mixing stream can contribute to coalescence of cavitation bubbles. Choked cavitation was observed at higher cavitation numbers σ with increasing mixing stream. The influence of the mixing stream became more significant at a higher orifice to outlet ratio, where a hydraulic flip was also observed at higher σ. The decrease of cavitation intensity with increasing back-pressure was found to be identical with conventional high-pressure homogenization. In the future, the results can be taken into account in the SHM process design to improve the efficiency of droplet break-up by preventing cavitation or at least hydraulic flip.

Impact of high-pressure homogenization on the microstructure and rheological properties of citrus fiber

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Dianbin Su ◽  
Xin-Di Zhu ◽  
Yong Wang ◽  
Dong Li ◽  
Li-Jun Wang
Keyword(s):  
Particle Size ◽  
High Pressure ◽  
Rheological Properties ◽  
Binding Capacity ◽  
Loss Modulus ◽  
High Pressure Homogenization ◽  
Carreau Model ◽  
Hydration Properties ◽  
Water Binding ◽  
Water Holding

Abstract Citrus fiber dispersion with different concentrations (5–25 g/kg) was treated by high-pressure homogenization (90 and 160 MPa) for two cycles. The particle size distribution, hydration properties of powders, morphology and rheological measurements were carried out to study the microstructure and rheological properties changes by high-pressure homogenization (HPH). In conclusion, the HPH can reduce the particle size of fiber, improve the water holding capacity and water binding capacity. Furthermore, fiber shape can be modified from globular cluster to flake-like slices, and tiny pores can be formed on the surface of citrus fiber. The apparent viscosity, storage modulus and loss modulus were increased by HPH whereas the activation energy was reduced. The Hershcel–Bulkley model, Carreau model and Power Law mode were selected to evaluate the rheological properties.

Sign in / Sign up

Export Citation Format

Share Document