scholarly journals Coupling High Resonant Frequency Piezoelectrics to Human-Scale Frequencies for Energy Harvesting

2017 ◽  
Vol 109 ◽  
pp. 771-776
Author(s):  
Euiyoung Park ◽  
Nazanin Bassiri-Gharb ◽  
Ilan Stern
Keyword(s):  
Energy Harvesting ◽  
Resonant Frequency ◽  
Human Scale ◽  
High Resonant Frequency

scholarly journals Development of a hybrid vibration converter for real vibration source / Entwicklung eines Hybrid-Vibrationswandlers für eine echte Schwingungsquelle

2019 ◽  
Vol 86 (s1) ◽  
pp. 57-61 ◽  
Author(s):  
Sonia Bradai ◽  
Slim Naifar ◽  
Olfa Kanoun
Keyword(s):  
Magnetic Field ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Energy Harvesting ◽  
Resonant Frequency ◽  
Ambient Vibration ◽  
Vibration Source ◽  
Frequency Bandwidth ◽  
Element Analysis ◽  
The Magnetic Field

AbstractHarvesting energy from ambient vibration sources is challenging due to its low characteristic amplitude and frequencies. In this purpose, this work presents a compact hybrid vibration converter based on electromagnetic and magnetoelectric principles working for a frequency bandwidth and under real vibration source properties. The combination of especially these two principles is mainly due to the fact that both converters can use the same changes of the magnetic field for energy harvesting. The converter was investigated using finite element analysis and validated experimentally. Results have shown that a frequency bandwidth up to 12 Hz with a characteristic resonant frequency at 24 Hz and a power density of 0.11mW/cm3 can be reached.

Resonant Frequency Tuning Strategies for Vibration-Based Energy Harvesters

2017 ◽  
Author(s):  
Lin Dong ◽  
Frank T. Fisher
Keyword(s):  
Energy Harvesting ◽  
Resonant Frequency ◽  
Energy Harvester ◽  
Frequency Tuning ◽  
Electrical Energy ◽  
Mechanical Stretch ◽  
Applied Bias Voltage ◽  
Energy Harvesters ◽  
Frequency Matching ◽  
Low Levels

Vibration-based energy harvesting has been widely investigated to as a means to generate low levels of electrical energy for applications such as wireless sensor networks. However, due to the fact that vibration from the environment is typically random and varies with different magnitudes and frequencies, it is a challenge to implement frequency matching in order to maximize the power output of the energy harvester with a wider frequency bandwidth for applications where there is a time-dependent, varying source frequency. Possible solutions of frequency matching include widening the bandwidth of the energy harvesters themselves in order to implement frequency matching and to perform resonance-based tuning approach, the latter of which shows the most promise to implement a frequency matching design. Here three tuning strategies are discussed. First a two-dimensional resonant frequency tuning technique for the cantilever-geometry energy harvesting device which extended previous 1D tuning approaches was developed. This 2D approach could be used in applications where space constraints impact the available design space of the energy harvester. In addition, two novel resonant frequency tuning approaches (tuning via mechanical stretch and tuning via applied bias voltage, respectively) for electroactive polymer (EAP) membrane-based geometry energy harvesters was proposed, such that the resulting changes in membrane tension were used to tune the device for applications targeting variable ambient frequency environments.

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilever in Piezoelectric Vibration Energy Harvester

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Shan Gao ◽  
Hongrui Ao ◽  
Hongyuan Jiang
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuits ◽  
Resonant Frequency ◽  
Power Density ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Cantilevered Beam ◽  
Piezoelectric Vibration

Abstract Piezoelectric vibration energy harvesting technology has attracted significant attention for its applications in integrated circuits, microelectronic devices, and wireless sensors due to high power density, easy integration, simple configuration, and other outstanding features. Among piezoelectric vibration energy harvesting structures, the cantilevered beam is one of the simplest and most commonly used structures. In this work, a vertically staggered rectangle-through-holes (VS-RTH) cantilevered model is proposed, which focuses on the multi-directional vibration collection. To verify the output performance of the device, this paper employs basic materials and fabrication methods with mathematical modeling. The simulations are conducted through finite element methods to discuss the properties of VS-RTH energy harvester on resonant frequency and output characteristics. Besides, an energy storage circuit is adopted as a collection system. It can achieve a maximum voltage of 4.5 V which is responded to the harmonic vibrating input of 1 N force and 1 m/s2 in a single vibrating direction. Moreover, the power density is 2.596 W/cm3 with a 100 kΩ resistor. It is almost four times better than the output of unidirectional cantilever beam with similar resonant frequency and volume. According to the more functionality in the applications, VS-RTH energy harvester can be used in general vibration acquisition of machines and vehicles. Except for electricity storage, the harvester can potentially employ as a sensor to monitor the diversified physical signals for smooth operation and emergence reports. Looking forward, the VS-RTH harvester renders an effective approach toward decomposing the vibration directions in the environment for further complicating vibration applications.

Design of a 6-DOF VCM-Driven Micro Stage

2014 ◽  
Vol 532 ◽  
pp. 3-6 ◽  
Author(s):  
Jae Heon Jeong ◽  
Myeong Hyeon Kim ◽  
Si Woong Woo ◽  
Da Hoon Ahn ◽  
Dong Pyo Hong
Keyword(s):  
Resonant Frequency ◽  
Laser Interferometer ◽  
Voice Coil Motor ◽  
Degree Of Freedom ◽  
Out Of Plane ◽  
Gap Sensors ◽  
Moving Magnet ◽  
High Resonant Frequency

This paper presents design of micro stage performing 6 degree-of-freedom (DOF) motions, which actuated by voice coil motor (VCM). The VCMs generate forces to perform in-plane motions and out-of-plane motions. The stage is supported by springs for compensating mass of the moving part of the stage and the stiffness of the springs has been chosen to meet the moving range requirement and to have high resonant frequency at the same time. Moving magnet type has been selected against moving coil type due to few merits of the type. The size of the stage is 380 X 380 X 60 mm3 and the motions are measured by laser interferometer and gap sensors.

scholarly journals Power Consideration in a Piezoelectric Generator

2013 ◽  
Vol 2013 ◽  
pp. 1-7
Author(s):  
Rémi Tardiveau ◽  
Frédéric Giraud ◽  
Adrian Amanci ◽  
Francis Dawson ◽  
Christophe Giraud-Audine ◽  
...  
Keyword(s):  
Phase Shift ◽  
Energy Harvesting ◽  
Resonant Frequency ◽  
Piezoelectric Material ◽  
Power Flow ◽  
Mechanical Energy ◽  
Power Losses ◽  
Vibration Excitation ◽  
Piezoelectric Generator ◽  
Energy Harvesting Devices

A piezoelectric generator converts mechanical energy into electricity and is used in energy harvesting devices. In this paper, synchronisation conditions in regard to the excitation vibration are studied. We show that a phase shift of ninety degrees between the vibration excitation and the bender’s displacement provides the maximum power from the mechanical excitation. However, the piezoelectric material is prone to power losses; hence the bender’s displacement amplitude is optimised in order to increase the amount of power which is converted into electricity. In the paper, we use active energy harvesting to control the power flow, and all the results are achieved at a frequency of 200 Hz which is well below the generator’s resonant frequency.

Evaluation of human-scale motion energy harvesting for wearable electronics

2017 ◽  
Author(s):  
Bharat Kathpalia ◽  
David Tan ◽  
Ilan Stern ◽  
Alper Erturk
Keyword(s):  
Energy Harvesting ◽  
Wearable Electronics ◽  
Human Scale ◽  
Motion Energy ◽  
Scale Motion

scholarly journals Use of Flat Ribbon like Electrode Geometry to Pole PVDF Piezoelectrics in Solution Processing

2019 ◽  
Vol 9 (1S3) ◽  
pp. 27-31
Keyword(s):  
Energy Harvesting ◽  
Resonant Frequency ◽  
Electric Fields ◽  
Low Frequency ◽  
Solution Processing ◽  
Electrode Geometry ◽  
Large Area ◽  
Parallel Plate Capacitor ◽  
Low Frequency Vibration ◽  
Corona Poling

We study how ribbons of fluids subjected to electric fields can serve applications in energy harvesting. In particular the emphasis is on how the geometry (i.e. 2-D ribbons) can influence functionality. For applications related to energy harvesting, we consider the use of polymer Piezo-electric PolyvinylideneFluoride (PVDF). Corona poling, photo-induced, photo-thermal and electron beam poling are the different conventional techniques used for PVDF poling. The parallel plate capacitor structure made for poling the PVDF material while the PVDF is being cured. One key advantage of preparing PVDF is the ability of solution processing. Normally, the liquid is then spin coated on a substrate and left to dry. Either during the process of spin coating, or after drying - the film of PVDF is poled so as to align the dipoles and make a piezoelectric. We propose the use of a metal-insulator ribbon like electrode geometry to combine the process of fabrication and poling thereby making the process more efficient. On the application of a voltage across the electrodes, the voltage of Vs is developed across the fluid. This result in a field of Vs/d across the PVDF fills aiding the process of poling while the film is in liquid phase. Therefore the ribbon like geometry aids the use of PVDF piezo-electrics in two ways. Firstly, it makes the fabrication process efficient by combining the poling with the structure development. Secondly, the control of width (w) and length (l) aids the setup of the PVDF piezoelectric resonant frequency for a given thickness (d). This helps match the resonant frequency of the ribbon with the incoming low frequency vibration to improve the energy harvesting levels. Piezo-electrics can be used in submerged applications, large area PVDF energy scavengers, mechanical filters and sensors, rural electrification, and charging circuits for hand-held devices.

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilevered in Piezoelectric Vibration Energy Harvester

2019 ◽  
Author(s):  
Shan Gao ◽  
Hongrui Ao ◽  
Hongyuan Jiang
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuits ◽  
Resonant Frequency ◽  
High Power ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy ◽  
Piezoelectric Vibration

Abstract Piezoelectric vibration energy harvesting technology has attracted significant attention for its applications in integrated circuits, microelectronic devices and wireless sensors due to high power density, easy integration, simple configuration and other outstanding features. Among piezoelectric vibration energy harvesting structures, cantilevered beam is one of the simplest and most commonly used structures. In this work, a vertically staggered rectangle-through-holes (VS-RTH) cantilevered model of mesoscale piezoelectric energy harvester is proposed, which focuses on the multi-directional vibration collection and low resonant frequency. To verify the output performances of the device, this paper employs basic materials and fabrication methods with mathematical modeling. The simulations are conducted through finite element methods to discuss the properties of VS-RTH energy harvester on resonant frequency and output characteristics. Besides, an energy storage circuit with high power collection rate is adopted as collection system. This harvester is beneficial to the further application of devices working with continuous vibrations and low power requirements.

Sign in / Sign up

Export Citation Format

Share Document