Testing the numerical models for boulder transport through high energy marine wave event: An example from southern Saurashtra, western India

2017 ◽  
Vol 444 ◽  
pp. 209-216 ◽  
Author(s):  
Drasti Gandhi ◽  
K.A. Chavare ◽  
S.P. Prizomwala ◽  
Nilesh Bhatt ◽  
N.Y. Bhatt ◽  
...  
2017 ◽  
Vol 21 (6) ◽  
pp. 3041-3060 ◽  
Author(s):  
Beas Barik ◽  
Subimal Ghosh ◽  
A. Saheer Sahana ◽  
Amey Pathak ◽  
Muddu Sekhar

Abstract. Meeting the growing water and food demands in a densely populated country like India is a major challenge. It requires an extensive investigation into the changing patterns of the checks and balances behind the maintenance of food security at the expense of depleting groundwater, along with high energy consumption. Here we present a comprehensive set of analyses which assess the present status of the water–food–energy nexus in India, along with its changing pattern, in the last few decades. We find that with the growth of population and consequent increase in the food demands, the food production has also increased, and this has been made possible with the intensification of irrigation. However, during the recent decade (after 1996), the increase in food production has not been sufficient to meet its growing demands, precipitating a decline in the per-capita food availability. We also find a statistically significant declining trend of groundwater storage in India during the last decade, as derived from the Gravity Recovery and Climate Experiment (GRACE) satellite datasets. Regional studies reveal contrasting trends between northern and western–central India. North-western India and the middle Ganga basin show a decrease in the groundwater storage as opposed to an increasing storage over western–central India. Comparison with well data reveals that the highest consistency of GRACE-derived storage data with available well measurements is in the middle Ganga basin. After analysing the data for the last 2 decades, we further showcase that, after a drought, the groundwater storage drops but is unable to recover to its original condition even after good monsoon years. The groundwater storage reveals a very strong negative correlation with the electricity consumption for agricultural usage, which may also be considered as a proxy for groundwater pumped for irrigation in a region. The electricity usage for agricultural purposes has an increasing trend and, interestingly, it does not have any correlation with the monsoon rainfall as computed with the original or de-trended variables. This reveals an important finding that the irrigation has been intensified irrespective of rainfall. This also resulted in a decreasing correlation between the food production and monsoon rainfall, revealing the increasing dependency of agricultural activities on irrigation. We conclude that irrigation has now become essential for agriculture to meet the food demand; however, it should be judiciously regulated and controlled, based on the water availability from monsoon rainfall, specifically after the drought years, as it is essential to recover from the deficits suffered previously.


2021 ◽  
Vol 91 (10) ◽  
pp. 1040-1066
Author(s):  
Thomas C. Neal ◽  
Christian M. Appendini ◽  
Eugene C. Rankey

ABSTRACT Although carbonate ramps are ubiquitous in the geologic record, the impacts of oceanographic processes on their facies patterns are less well constrained than with other carbonate geomorphic forms such as isolated carbonate platforms. To better understand the role of physical and chemical oceanographic forces on geomorphic and sedimentologic variability of ramps, this study examines in-situ field measurements, remote-sensing data, and hydrodynamic modeling of the nearshore inner ramp of the modern northeastern Yucatán Shelf, Mexico. The results reveal how sediment production and accumulation are influenced by the complex interactions of the physical, chemical, and biological processes on the ramp. Upwelled, cool, nutrient-rich waters are transported westward across the ramp and concentrated along the shoreline by cold fronts (Nortes), westerly regional currents, and longshore currents. This influx supports a mix of both heterozoan and photozoan fauna and flora in the nearshore realm. Geomorphically, the nearshore parts of this ramp system in the study area include lagoon, barrier island, and shoreface environments, influenced by the mixed-energy (wave and tidal) setting. Persistent trade winds, episodic tropical depressions, and winter storms generate waves that propagate onto the shoreface. Extensive shore-parallel sand bodies (beach ridges and subaqueous dune fields) of the high-energy, wave-dominated upper shoreface and foreshore are composed of fine to coarse skeletal sand, lack mud, and include highly abraded, broken and bored grains. The large shallow lagoon is mixed-energy: wave-dominated near the inlet, it transitions to tide-dominated in the more protected central and eastern regions. Lagoon sediment consists of Halimeda-rich muddy gravel and sand. Hydrodynamic forces are especially strong where bathymetry focuses water flow, as occurs along a promontory and at the lagoon inlet, and can form subaqueous dunes. Explicit comparison among numerical models of conceptual shorefaces in which variables are altered and isolated systematically demonstrates the influences of the winds, waves, tides, and currents on hydrodynamics across a broad spectrum of settings (e.g., increased tidal range, differing wind and wave conditions). Results quantify how sediment transport patterns are determined by wave height and direction relative to the shoreface, but tidal forces locally control geomorphic and sedimentologic character. Similarly, the physical oceanographic processes acting throughout the year (e.g., daily tides, episodic winter Nortes, and persistent easterly winds and waves) have more impact on geomorphology and sedimentology of comparable nearshore systems than intense, but infrequent, hurricanes. Overall, this study provides perspectives on how upwelling, nutrient levels, and hydrodynamics influence the varied sedimentologic and geomorphic character of the nearshore areas of this high-energy carbonate ramp system. These results also provide for more accurate and realistic conceptual models of the depositional variability for a spectrum of modern and ancient ramp systems.


Author(s):  
Martin Storheim ◽  
Ekaterina Kim ◽  
Jørgen Amdahl ◽  
Sören Ehlers

Large natural resources in the Arctic region will in the coming years require significant shipping activity within and through the Arctic region. When operating in Arctic open water, there is a significant risk of high-energy encounters with smaller ice masses like bergy bits and growlers. Consequently, there is a need to assess the structural response to high energy encounters in ice-infested waters. Experimental data of high energy ice impact are scarce, and numerical models could be used as a tool to provide insight into the possible physical processes and to their structural implications. This paper focuses on impact with small icebergs and bergy bits. In order to rely on the numerical results, it is necessary to have a good understanding of the physical parameters describing the iceberg interaction. Icebergs are in general inhomogeneous with properties dependent among other on temperature, grain size, strain rate, shape and imperfections. Ice crushing is a complicated process involving fracture, melting, high confinement and high pressures. This necessitates significant simplifications in the material modeling. For engineering purposes a representative load model is applied rather than a physically correct ice material model. The local shape dependency of iceberg interaction is investigated by existing representative load material models. For blunt objects and moderate deformations the models agree well, and show a similar range of energy vs. hull deformation. For sharper objects the material models disagree quite strongly. The material model from Liu et.al (2011) crush the ice easily, whereas the models from Gagnon (2007) and Gagnon (2011) both penetrate the hull. From a physical perspective, a sharp ice edge should crush initially until sufficient force is mobilized to deform the vessel hull. Which ice features that will crush or penetrate is important to know in order to efficiently design against iceberg impact. Further work is needed to assess the energy dissipation in ice during crushing, especially for sharp features. This will enable the material models to be calibrated towards an energy criterion, and yield more coherent results. At the moment it is difficult to conclude if any of the ice models behave in a physically acceptable manner based on the structural deformation. Consequently, it is premature to conclude in a design situation as to which local ice shapes are important to design against.


Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4304
Author(s):  
Miroslaw Ferdynus ◽  
Patryk Rozylo ◽  
Michal Rogala

The paper presents the results of numerical tests of impact and energy absorption capacity of thin-walled columns, subjected to axial impact loading, made of aluminum alloy, and having a square cross-section and spherical indentations on their lateral surfaces. The numerical models were validated using an experiment that was conducted on the Instron CEAST 9350 High Energy System drop hammer. Material properties of the applied aluminum alloy were determined on the basis of a static tension test. The crushing behavior of the columns and some crashworthiness indicators were investigated. On the basis of the results of the conducted analyses, conclusions were drawn about the most beneficial design/constructional variants in terms of achieved crashworthiness parameters.


2018 ◽  
Vol 66 (2) ◽  
pp. 172-188 ◽  
Author(s):  
Mario Luiz Mascagni ◽  
Eduardo Siegle ◽  
Moysés Gonsalez Tessler ◽  
Samara Cazzoli y Goya

Abstract Wave-dominated embayed beaches on irregular rocky coastlines are highly appreciated for their landscapes and tourism potential. Yet our understanding about the interaction of the oceanographic processes with the geological inheritance in this type of beaches still needs further investigation to better understand their natural balance. In this study, we apply the classical approach of morphodynamics to describe for the first time the variations in the Boiçucanga beach morphology, an embayed beach located in São Sebastião City on an irregular rocky coastline that is well known for its beautiful beaches embedded in the valleys of Serra do Mar. Field surveys were performed over 15 months, between April 2008 and September 2009, seeking to evaluate the interactions among the morphology, sediments and hydrodynamic characteristics at Boiçucanga. All data generated during the field surveys have supported the application of the following morphodynamic models: Classification of morphological beach stages [O]; Number of nearshore sandbars [B*]; Relative tide range [RTR]; Beach exposure on embayed coasts [Ro/a and ß]; and Embayment beach scaling parameter [d] to determine the geomorphological behavior of the beach on monthly and annual time scales. From these models, Boiçucanga is classified as a deep embayed beach exposed to high-energy waves, with a predominant reflective profile, which favors the development of beach cusps and topographically controlled rip currents. The combined results of the field observations and applied models allowed us to better understand the role of geological heritage in the two morphodynamic signatures found at the same beach arch. For future studies, we will focus on numerical models to increase the understanding of the hydrodynamic processes that govern the sediment transport in Boiçucanga.


2016 ◽  
Vol 93 (12) ◽  
Author(s):  
Reetanjali Moharana ◽  
Soebur Razzaque ◽  
Nayantara Gupta ◽  
Peter Mészáros

2021 ◽  
Vol 9 (6) ◽  
pp. 1531-1543
Author(s):  
Sophie Bodek ◽  
Douglas J. Jerolmack

Abstract. As rocks are transported, they primarily undergo two breakdown mechanisms: fragmentation and chipping. Fragmentation is catastrophic breakup by fracture in the bulk – either by subcritical crack growth under repeated collisions, or from a single high-energy (supercritical) collision – and produces angular shards. Chipping is a distinct low-energy mechanism of impact attrition that involves shallow cracking; this process rounds river pebbles in a universal manner under bed-load transport. Despite its geophysical significance, the transition from chipping to fragmentation is not well studied. Here, we examine this transition experimentally by measuring the shape and mass evolution of concrete particles of varying strength, subject to repeated collisions in a rotating drum. For sufficiently strong particles, chipping occurred and was characterized by the following: attrition products were orders of magnitude smaller than the parent; attrition rate was insensitive to material strength; and particles experienced monotonic rounding toward a spherical shape. As strength decreased, we observed the onset of a subcritical cracking regime associated with fragmentation: mass of attrition products became larger and more varied; attrition rate was inversely proportional to material strength; and shape evolution fluctuated and became non-monotonic. Our results validate conceptual and numerical models for impact attrition: chipping follows “Sternberg's law” of exponential mass loss through time; for fragmentation, the lifetime of particles increases nonlinearly with material strength, consistent with “Basquin's law” of fatigue failure. We suggest that bedrock erosion models must be clarified to incorporate distinct attrition mechanisms, and that pebble or bedrock-channel shape may be utilized to deduce the operative mechanism in a given environment.


2021 ◽  
Author(s):  
Giovanni Scardino ◽  
Angela Rizzo ◽  
Vincenzo De Santis ◽  
Despo Kyriakoudi ◽  
Alessio Rovere ◽  
...  

<p>South-eastern Sicily is among the most seismically active areas of the central Mediterranean. As such, it is marked by a high level of crustal seismicity producing major earthquakes (up to Mw ∼7), and consequent several earthquake-generated tsunami, which have affected the Ionian coast of South-eastern Sicily in historical times. These tsunami events left geomorphic imprints such as large boulders or high-energy deposits along the Sicily coasts. In Ognina, a small town located 20 km south of Siracusa, high-energy deposits were correlated with three tsunami events that struck this coast on 21 July 365 Common Era (CE), 4 February 1169 CE, and 11 January 1693 CE. The deposits are detected in the inner part of a narrow channel, that is thought to have funnelled the tsunami flow energy. In this work, numerical models have been performed to simulate the tsunami impacts, considering the most probable tsunamogenic sources described in literature and integrating them with the past sea-level positions. To this end, we used Delft Dashboard, Delft 3d-FLOW and XBeach. A reconstruction of the past topography of Ognina coast was performed through geological and historical information, in order to model the tsunami wave propagation in the ancient landscape. Geological evidence with model results, under different scenarios, allow us to benchmark fault location and displacement scenarios. Modelling results indicate that the 1693 tsunami event was stronger than others impacting the Ognina area, determining significant inland flooding in the narrow channel. Moreover, simulations show that the most probable tsunamogenic sources of 1693 and 1169 tsunami events could be attributed to Western Fault dislocations occurred off-shore of Ognina area, rather than the other tsunamogenic sources described in literature, located off-shore of Catania and Siracusa. Modelling of 365 AD event shows a long period for the tsunami wave that determined the sedimentation on the lower units in the outcrop. For each of the three tsunami events, models of high-energy deposition match with position and thickness of high-energy layers detected in the field. The results of this study show how a combined approach between geological evidence and tsunami modelling could be a suitable tool for the attribution of tsunami deposits connected to specific tsunamogenic sources.</p><p> </p><p>Keyword: tsunami; earthquake; faults; flooding; sea-level</p>


2013 ◽  
Vol 762 ◽  
pp. 457-464 ◽  
Author(s):  
Riccardo Casati ◽  
Matteo Amadio ◽  
Carlo Alberto Biffi ◽  
David Dellasega ◽  
Ausonio Tuissi ◽  
...  

Metal matrix nanocomposites have been produced by powder metallurgy route. Al and nanoAl2O3powders were grinded through high energy ball milling. Then, the composite powders were sintered by Equal Channel Angular Pressing (ECAP). 12 ECAP passes were carried out in order to improve the dispersion of the hard particles. SEM analysis was performed to investigate the distribution of the ceramic nanoparticles within the matrix. Hardness tests were executed to evaluate the mechanical behavior of the nanocomposites. Finally, mechanical strength values obtained by numerical models were compared with those estimated from hardness measurements. High energy ball milling followed by ECAP process revealed to be a suitable route for the production of metal matrix composites reinforced with well dispersed nanoparticles.


2019 ◽  
Vol 490 (4) ◽  
pp. 4935-4943 ◽  
Author(s):  
Markus Ahlers ◽  
Lea Halser

ABSTRACT We investigate the expected high-energy neutrino fluence from internal shocks produced in the relativistic outflow of gamma-ray bursts. Previous model predictions have primarily focused on on-axis observations of uniform jets. Here, we present a generalization to account for arbitrary viewing angles and jet structures. Based on this formalism, we provide an improved scaling relation that expresses off-axis neutrino fluences in terms of on-axis model predictions. We also find that the neutrino fluence from structured jets can exhibit a strong angular dependence relative to that of gamma-rays and can be far more extended. We examine this behaviour in detail for the recent short gamma-ray burst GRB 170817A observed in coincidence with the gravitational wave event GW170817.


Sign in / Sign up

Export Citation Format

Share Document