586. Colour changes in heated and unheated milk: IV. the theoretical background to the reflectance changes in separated milk

1955 ◽  
Vol 22 (2) ◽  
pp. 200-204 ◽  
Author(s):  
H. Burton
Keyword(s):  
Soluble Protein ◽  
Colloidal Particles ◽  
Theoretical Background ◽  
General Level ◽  
Colloidal Solutions ◽  
Casein Micelles ◽  
Scattering Of Light ◽  
Colour Changes ◽  
Mean Size ◽  
The Mean

The theory of the scattering of light in colloidal solutions is considered. As a result it is suggested that the reflectance changes in milk which involve a rise or fall in the general level of reflectance are caused by an increase or decrease in the mean size of the colloidal particles. Whether the particles responsible are the casein micelles or the soluble protein depends on the phenomenon to be explained.The change in reflectance on the browning of milk, which is dependent on wavelength, is considered to have a more complex cause, involving the production of absorbing molecules.

scholarly journals Investigations on the scattering of light in colloidal solutions and gels. Part I—Agar sol and gel

1929 ◽  
Vol 122 (789) ◽  
pp. 76-103 ◽  
Keyword(s):  
Optical Properties ◽  
Colloidal Particles ◽  
Clear Understanding ◽  
Special Importance ◽  
Colloidal Systems ◽  
Colloidal Solutions ◽  
Scattering Of Light ◽  
Internal Equilibrium ◽  
Tyndall Effect ◽  
Colloidal State

One of the fundamental problems in the field of colloids is the investigation of their structure. This is a subject of considerable importance and has been attracting a great deal of attention from workers in this field. A systematic study of the various physical properties of colloids is essential for a clear understanding of the nature of the colloidal state. The optical properties are of special importance as they have the great advantage of revealing the structure of colloidal systems without disturbing their internal equilibrium. They furnish direct information concerning the size and the shape of the colloidal particles. In a series of papers, of which this is the first, the author proposes to publish investigations on the scattering of light in colloidal solutions and gels. An attempt will be made to discuss the various problems concerning their structure, as revealed by the study of the Tyndall effect in such systems.

Effect on the composition and properties of casein micelles of interaction with ionic materials

1982 ◽  
Vol 49 (1) ◽  
pp. 87-98 ◽  
Author(s):  
Margaret L. Green
Keyword(s):  
Calcium Phosphate ◽  
Inorganic Phosphate ◽  
Casein Micelles ◽  
Low Concentrations ◽  
Colloidal Calcium Phosphate ◽  
Ionic Materials ◽  
Mean Size ◽  
Charge Concentration ◽  
The Mean ◽  
Micelle Hydration

SummaryThe effect on the composition and properties of casein micelles of the binding of ionic materials which accelerate the coagulation of milk on rennet treatment, was investigated. When considered in terms of their relative charge concentration, all the materials tested caused similar effects. The casein, inorganic phosphate and Ca contents of the micelles increased slightly. Micelle hydration decreased as additive binding increased. Casein and Ca dissociation on cooling increased at low concentrations of bound material, then progressively decreased at higher concentrations. The mean size of micelles and their electrophoretic mobility was little affected by bound ionic materials. The aggregation of the casein complexes in colloidal calcium phosphate-free milk was markedly increased by adding ionic materials, the efficiencies of these additives paralleling their efficiencies in accelerating the coagulation of milk by rennet. The results suggested that the ionic materials were bound in the interior of the casein micelles and promoted aggregation after rennet treatment by shielding charged groups, thus increasing the micellar hydrophobicity.

Colloidal molybdoantimonic acids as ion exchangers

1991 ◽  
Vol 69 (2) ◽  
pp. 293-299 ◽  
Author(s):  
M. Koné ◽  
P. Courtin ◽  
J. Lemerle
Keyword(s):  
Colloidal Particles ◽  
Polymerization Process ◽  
Exchange Reactions ◽  
Aqueous Dispersions ◽  
Normal Distributions ◽  
Mean Size ◽  
The Mean ◽  
Mo Content ◽  
The Stability ◽  
Log Normal

Colloidal particles with a c.c.p. structure were obtained from mixtures of antimonic and molybdic acids through a polymerization process. These particles were octahedral and their sizes fits the log-normal distributions. The mean size decreases and the polydispersity increases with increasing Mo content in the particles. The stability of the aqueous dispersions was due to the surface charge density of the particles which was enhanced when increasing the Mo content. Ion exchange reactions can occur with the dispersions. Two different routes lead to Ag+ fixation: substitution of core H+ without flocculation of the dispersion or cancellation of external charges with flocculation. Key words: inorganic exchangers, colloids, antimonic acid, molybdic acid.

Batch Precipitation of Lead Iodide

1994 ◽  
Vol 59 (6) ◽  
pp. 1301-1304
Author(s):  
Jaroslav Nývlt ◽  
Stanislav Žáček
Keyword(s):  
Aqueous Solution ◽  
Particle Size ◽  
Particle Size Distribution ◽  
Size Distribution ◽  
Crystal Size ◽  
Lead Nitrate ◽  
Lead Iodide ◽  
Constant Rate ◽  
Mean Size ◽  
The Mean

Lead iodide was precipitated by a procedure in which an aqueous solution of potassium iodide at a concentration of 0.03, 0.10 or 0.20 mol l-1 was stirred while an aqueous solution of lead nitrate at one-half concentration was added at a constant rate. The mean size of the PbI2 crystals was determined by evaluating the particle size distribution, which was measured sedimentometrically. The dependence of the mean crystal size on the duration of the experiment exhibited a minimum for any of the concentrations applied. The reason for this is discussed.

scholarly journals Effects of topical gel formulation of Ficus carica latex on cutaneous leishmaniasis induced by Leishmania major in BALB/c mice

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Ali Pouryousef ◽  
Erfan Eslami ◽  
Sepehr Shahriarirad ◽  
Sina Zoghi ◽  
Mehdi Emami ◽  
...  
Keyword(s):  
Cutaneous Leishmaniasis ◽  
Murine Model ◽  
Leishmania Major ◽  
Considerable Effect ◽  
Ficus Carica ◽  
Control Group ◽  
Topical Gel ◽  
The Third ◽  
Mean Size ◽  
The Mean

Abstract Objectives The current study aimed to evaluate the effects of Ficus carica latex on the treatment of cutaneous leishmaniasis (CL), induced by Leishmania major. A 5% topical gel with F. carica latex was prepared. BALB/c mice were infected by inoculation of amastigotes form of L. major. Thirty BALB/c mice were divided into five groups, where the first group was treated daily, the second group twice per day, and the third group every other day with the 5% topical gel, for 3 weeks. The sizes of the lesions were measured before and during the course of treatment. Results Although the mean size of lesions in the mice group treated with the 5% F. carica gel, especially in the group receiving daily treatment, was less than the mean size of the lesions in the control group, yet, the differences was not statistically significant (p > 0.05). The findings of the current study demonstrated that the 5% F. carica latex with a 3-week course of treatment had no considerable effect in recovery or control of CL induced by L. major in the murine model. Using higher concentration of F. carica latex and with longer treatment lengths may increase its efficacy in the treatment of CL.

scholarly journals Mudrock Microstructure: A Technique for Distinguishing between Deep-Water Fine-Grained Sediments

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 653
Author(s):  
Shereef Bankole ◽  
Dorrik Stow ◽  
Zeinab Smillie ◽  
Jim Buckman ◽  
Helen Lever
Keyword(s):  
Grain Size ◽  
Deep Water ◽  
Sedimentary Facies ◽  
X Ray Diffraction ◽  
Weak Current ◽  
Large Area ◽  
Fine Grained ◽  
Mean Size ◽  
The Mean ◽  
Water Facies

Distinguishing among deep-water sedimentary facies has been a difficult task. This is possibly due to the process continuum in deep water, in which sediments occur in complex associations. The lack of definite sedimentological features among the different facies between hemipelagites and contourites presented a great challenge. In this study, we present detailed mudrock characteristics of the three main deep-water facies based on sedimentological characteristics, laser diffraction granulometry, high-resolution, large area scanning electron microscopy (SEM), and the synchrotron X-ray diffraction technique. Our results show that the deep-water microstructure is mainly process controlled, and that the controlling factor on their grain size is much more complex than previously envisaged. Retarding current velocity, as well as the lower carrying capacity of the current, has an impact on the mean size and sorting for the contourite and turbidite facies, whereas hemipelagite grain size is impacted by the natural heterogeneity of the system caused by bioturbation. Based on the microfabric analysis, there is a disparate pattern observed among the sedimentary facies; turbidites are generally bedding parallel due to strong currents resulting in shear flow, contourites are random to semi-random as they are impacted by a weak current, while hemipelagites are random to oblique since they are impacted by bioturbation.

Late endoscopic evaluation of the ostium size after external dacryocystorhinostomy

2020 ◽  
pp. 112067212097604
Author(s):  
Reem R Al Huthail ◽  
Yasser H Al-Faky
Keyword(s):  
Chart Review ◽  
Retrospective Chart Review ◽  
Tertiary Hospital ◽  
Nasal Endoscope ◽  
Long Term Follow Up ◽  
Mean Size ◽  
External Dacryocystorhinostomy ◽  
The Mean

Objective: To evaluate the effect of chronicity on the size of the ostium after external dacryocystorhinostomy (DCR) with intubation. Methods: Design: A retrospective chart review of patients who underwent external DCR with intubation over 10 years from January 2003 at a tertiary hospital. All patients were recruited and examined with rigid nasal endoscope. Results: A total number of 66 (85 eyes) patients were included. The mean age at the time of evaluation was 53.1 years with gender distribution of 54 females (81.8 %). The mean duration ±SD between the date of surgery and the date of evaluation was 33.2 ± 33.6 (6–118 months). Our study showed an overall anatomical and functional success of 98.8% and 95.3%, respectively. The mean size of the ostium (±SD) was 23.0 (±15.7) mm2 (ranging from 1 to 80.4 mm2). The size of the ostium was not a significant factor for failure ( p = 0.907). No statistically significant correlation was found between the long-term duration after surgery and the size of the ostium ( R: 0.025, p = 0.157). Conclusions: Nasal endoscopy after DCR is valuable in evaluating the ostium with no observed potential correlation between the long-term follow-up after surgery and the size of the ostium.

Lead inclusions in aluminium

1989 ◽  
Vol 157 ◽  
Author(s):  
E. Johnson ◽  
L. Gråbaek ◽  
J. Bohr ◽  
A. Johansen ◽  
L. Sarholt-Kristensen ◽  
...  
Keyword(s):  
Hysteresis Loop ◽  
Room Temperature ◽  
Noble Gas ◽  
Melting Transition ◽  
X Ray Diffraction ◽  
Free Surfaces ◽  
The Matrix ◽  
Mean Size ◽  
The Mean ◽  
Spontaneous Phase

ABSTRACTIon implantation at room temperature of lead into aluminium leads to spontaneous phase separation and formation of lead precipitates growing topotactically with the matrix. Unlike the highly pressurised (∼ 1–5 GPa) solid inclusions formed after noble gas implantations, the pressure in the lead precipitates is found to be less than 0.12 GPa.Recently we have observed the intriguing result that the lead inclusions in aluminium exhibit both superheating and supercooling [1]. In this paper we review and elaborate on these results. Small implantation-induced lead precipitates embedded in an aluminium matrix were studied by X-ray diffraction. The (111) Bragg peak originating from the lead crystals was followed during several temperature cycles, from room temperature to 678 K. The melting temperature for bulk lead is 601 K. In the first heating cycle we found a superheating of the lead precipitates of 67 K before melting occurred. During subsequent cooling a supercooling of 21 K below the solidification point of bulk lead was observed. In the subsequent heating cycles this hysteresis at the melting transition was reproducible. The full width of the hysteresis loop slowly decreased to 62 K, while the mean size of the inclusions gradually increased from 14.5 nm to 27 nm. The phenomena of superheating and supercooling are thus most pronounced for the small crystallites. The persistence of the hysteresis loop over successive heating cycles demonstrate that its cause is intrinsic in nature, and it is believed that the superheating originates from the lack of free surfaces of the lead inclusions.

scholarly journals Mechanical ventilation-induced alterations of intracellular surfactant pool and blood–gas barrier in healthy and pre-injured lungs

2020 ◽  
Author(s):  
Jeanne-Marie Krischer ◽  
Karolin Albert ◽  
Alexander Pfaffenroth ◽  
Elena Lopez-Rodriguez ◽  
Clemens Ruppert ◽  
...  
Keyword(s):  
Mechanical Ventilation ◽  
Blood Gas ◽  
Control Groups ◽  
Gas Barrier ◽  
Alveolar Epithelial ◽  
Alveolar Surfactant ◽  
Healthy Control ◽  
Mean Size ◽  
The Mean ◽  
Injury Progression

AbstractMechanical ventilation triggers the manifestation of lung injury and pre-injured lungs are more susceptible. Ventilation-induced abnormalities of alveolar surfactant are involved in injury progression. The effects of mechanical ventilation on the surfactant system might be different in healthy compared to pre-injured lungs. In the present study, we investigated the effects of different positive end-expiratory pressure (PEEP) ventilations on the structure of the blood–gas barrier, the ultrastructure of alveolar epithelial type II (AE2) cells and the intracellular surfactant pool (= lamellar bodies, LB). Rats were randomized into bleomycin-pre-injured or healthy control groups. One day later, rats were either not ventilated, or ventilated with PEEP = 1 or 5 cmH2O and a tidal volume of 10 ml/kg bodyweight for 3 h. Left lungs were subjected to design-based stereology, right lungs to measurements of surfactant proteins (SP−) B and C expression. In pre-injured lungs without ventilation, the expression of SP-C was reduced by bleomycin; while, there were fewer and larger LB compared to healthy lungs. PEEP = 1 cmH2O ventilation of bleomycin-injured lungs was linked with the thickest blood–gas barrier due to increased septal interstitial volumes. In healthy lungs, increasing PEEP levels reduced mean AE2 cell size and volume of LB per AE2 cell; while in pre-injured lungs, volumes of AE2 cells and LB per cell remained stable across PEEPs. Instead, in pre-injured lungs, increasing PEEP levels increased the number and decreased the mean size of LB. In conclusion, mechanical ventilation-induced alterations in LB ultrastructure differ between healthy and pre-injured lungs. PEEP = 1 cmH2O but not PEEP = 5 cmH2O ventilation aggravated septal interstitial abnormalities after bleomycin challenge.

Sign in / Sign up

Export Citation Format

Share Document