scholarly journals The magnitude of variation in temperature within a year has an effect on the seasonal variations of chickenpox incidence in Japan

2001 ◽  
Vol 126 (2) ◽  
pp. 269-277 ◽  
Author(s):  
A. KOKAZE ◽  
M. YOSHIDA ◽  
Y. SEKINE ◽  
M. ISHIKAWA ◽  
T. KUROKOCHI ◽  
...  
Keyword(s):  
Seasonal Variations ◽  
Close Correlation ◽  
Daily Temperature ◽  
Size And Shape ◽  
Different Types ◽  
Close Relationship ◽  
The Difference ◽  
Two Peaks ◽  
Second Peak

We investigated the epidemic pattern of chickenpox incidence among 47 prefectures in Japan. There were two peaks in chickenpox incidence in all prefectures. The first peaks appear at almost the same time in a year, while the second peaks occur at different times with relatively different types of size and shape. The feature of the second peak might characterize the epidemic pattern of chickenpox. We first introduced the second peak index, that is, the ratio of the difference between the incidence at the point of the second peak and the minimum incidence between the first and second peaks to the difference between the incidence at the point of the second peak and the minimum incidence in the year. There was a close correlation between the second peak index and the magnitude of variation in temperature within a year corresponding to the difference between the maximum and the minimum of the monthly mean of the highest daily temperature. This is the first article focusing on the close relationship between the second peak of epidemic pattern of chickenpox incidence and the variation of temperature within a year.

scholarly journals CYTOPLASMIC PARTICLES AND AMINOACYL TRANSFERASE I ACTIVITY

1970 ◽  
Vol 45 (1) ◽  
pp. 1-8 ◽  
Author(s):  
Emma Shelton ◽  
Edward L. Kuff ◽  
Elizabeth S. Maxwell ◽  
J. T. Harrington
Keyword(s):  
Electron Microscopy ◽  
Escherichia Coli ◽  
Plant Cells ◽  
Size And Shape ◽  
Two Peaks ◽  
Second Peak ◽  
Aminoacyl Transferase

It has been possible to show by electron microscopy of samples selected from sucrose gradients that particles of specific size and shape are present in supernatant fluids derived from nucleated animal and plant cells, but not in extracts from Escherichia coli. Aminoacyl transferase I activity in these same gradients sediments in two peaks representing material of approximately 5–7S and 18–20S. A rectangular particle, 100 x 145 A in size, sediments at 19S and coincides with the second peak of transferase I activity. The possibility that the rectangular particle may be a "carrier" particle associated with transferase I is discussed.

Difference of [Ca2+]i Movements in Platelets Stimulated by Thrombin and TRAP: the Involvement of αIIbβ3-Mediated TXA2 Synthesis

1998 ◽  
Vol 79 (06) ◽  
pp. 1184-1190 ◽  
Author(s):  
Yoshiaki Tomiyama ◽  
Shigenori Honda ◽  
Kayoko Senzaki ◽  
Akito Tanaka ◽  
Mitsuru Okubo ◽  
...  
Keyword(s):  
Platelet Aggregation ◽  
Fibrinogen Binding ◽  
Adp Release ◽  
The Difference ◽  
Txa2 Receptor Antagonist ◽  
High Level ◽  
Inhibition Studies ◽  
Peak Increase ◽  
Second Peak ◽  
Assay Conditions

SummaryThis study investigated the difference of [Ca2+]i movement in platelets in response to thrombin and TRAP. The involvement of αIIbβ3 in this signaling was also studied. Stimulation of platelets with thrombin at 0.03 U/ml caused platelet aggregation and a two-peak increase in [Ca2+]i. The second peak of [Ca2+]i, but not the first peak was abolished by the inhibition of platelet aggregation with αIIbβ3 antagonists or by scavenging endogenous ADP with apyrase. A cyclooxygenase inhibitor, aspirin, and a TXA2 receptor antagonist, BM13505, also abolished the second peak of [Ca2+]i but not the first peak, although these regents did not inhibit aggregation. Under the same assay conditions, measurement of TXB2 demonstrated that αIIbβ3 antagonists and aspirin almost completely inhibited the production of TXB2. In contrast to thrombin-stimulation, TRAP caused only a single peak of [Ca2+]i even in the presence of platelet aggregation, and a high level of [Ca2+]i increase was needed for the induction of platelet aggregation. The inhibition of aggregation with αIIbβ3 antagonists had no effect on [Ca2+]i change and TXB2 production induced by TRAP. Inhibition studies using anti-GPIb antibodies suggested that GPIb may be involved in the thrombin response, but not in the TRAP. Our findings suggest that low dose thrombin causes a different [Ca2+]i response and TXA2 producing signal from TRAP. Endogenous ADP release and fibrinogen binding to αIIbβ3 are responsible for the synthesis of TXA2 which results in the induction of the second peak of [Ca2+]i in low thrombin- but not TRAP-stimulated platelets.

Use of a Lyophilized Reference Plasma to Compare Coagulation Test Procedures

1975 ◽  
Vol 34 (02) ◽  
pp. 426-444 ◽  
Author(s):  
J Kahan ◽  
I Nohén
Keyword(s):  
Oral Anticoagulant Therapy ◽  
Repeated Measurements ◽  
Test Procedures ◽  
Coagulation Activity ◽  
Close Relationship ◽  
Measured Activity ◽  
Test Materials ◽  
The Difference ◽  
The Stability ◽  
The One

SummaryIn 4 collaborative trials, involving a varying number of hospital laboratories in the Stockholm area, the coagulation activity of different test materials was estimated with the one-stage prothrombin tests routinely used in the laboratories, viz. Normotest, Simplastin-A and Thrombotest. The test materials included different batches of a lyophilized reference plasma, deep-frozen specimens of diluted and undiluted normal plasmas, and fresh and deep-frozen specimens from patients on long-term oral anticoagulant therapy.Although a close relationship was found between different methods, Simplastin-A gave consistently lower values than Normotest, the difference being proportional to the estimated activity. The discrepancy was of about the same magnitude on all the test materials, and was probably due to a divergence between the manufacturers’ procedures used to set “normal percentage activity”, as well as to a varying ratio of measured activity to plasma concentration. The extent of discrepancy may vary with the batch-to-batch variation of thromboplastin reagents.The close agreement between results obtained on different test materials suggests that the investigated reference plasma could be used to calibrate the examined thromboplastin reagents, and to compare the degree of hypocoagulability estimated by the examined PIVKA-insensitive thromboplastin reagents.The assigned coagulation activity of different batches of the reference plasma agreed closely with experimentally obtained values. The stability of supplied batches was satisfactory as judged from the reproducibility of repeated measurements. The variability of test procedures was approximately the same on different test materials.

scholarly journals Investigation of Color Reproduction on Linen Fabrics when Printing with Mimaki TX400-1800D Inkjet with Pigment TP250 Dyes

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 354
Author(s):  
Tim Tofan ◽  
Rimantas Stonkus ◽  
Raimondas Jasevičius
Keyword(s):  
Mechanical Properties ◽  
Color Reproduction ◽  
Related Effect ◽  
Color Characteristics ◽  
Fabric Density ◽  
Different Types ◽  
The Difference ◽  
Printing Parameters ◽  
Linen Fabric

The aim of this research is to investigate related effect of dyeability to linen textiles related to different printing parameters. The study investigated the change in color characteristics when printing on linen fabrics with an inkjet MIMAKI Tx400-1800D printer with pigmented TP 250 inks. The dependence of color reproduction on linen fabrics on the number of print head passes, number of ink layers to be coated, linen fabric density, and different types of linen fabric was investigated. All this affects the quality of print and its mechanical properties. The change in color characteristics on different types of linen fabrics was determined experimentally. We determine at which print settings the most accurate color reproduction can be achieved on different linen fabrics. The difference between the highest and the lowest possible number of head passages was investigated. The possibilities of reproducing different linen fabric colors were determined.

scholarly journals The study of multipeaked type-I X-ray bursts in the neutron star low-mass X-ray binary 4U 1636 − 536 with RXTE

2020 ◽  
Vol 501 (1) ◽  
pp. 168-178
Author(s):  
Chen Li ◽  
Guobao Zhang ◽  
Mariano Méndez ◽  
Jiancheng Wang ◽  
Ming Lyu
Keyword(s):  
Neutron Star ◽  
Flux Ratio ◽  
Light Curves ◽  
Type I ◽  
X Ray ◽  
Soft State ◽  
Peak Flux ◽  
Low Mass ◽  
Two Peaks ◽  
Second Peak

ABSTRACT We have found and analysed 16 multipeaked type-I bursts from the neutron-star low-mass X-ray binary 4U 1636 − 53 with the Rossi X-ray Timing Explorer (RXTE). One of the bursts is a rare quadruple-peaked burst that was not previously reported. All 16 bursts show a multipeaked structure not only in the X-ray light curves but also in the bolometric light curves. Most of the multipeaked bursts appear in observations during the transition from the hard to the soft state in the colour–colour diagram. We find an anticorrelation between the second peak flux and the separation time between two peaks. We also find that in the double-peaked bursts the peak-flux ratio and the temperature of the thermal component in the pre-burst spectra are correlated. This indicates that the double-peaked structure in the light curve of the bursts may be affected by enhanced accretion rate in the disc, or increased temperature of the neutron star.

Heat Treatment Effects on Distortion, Residual Stress, and Retained Austenite in Carburized 4320 Steel

2014 ◽  
Vol 783-786 ◽  
pp. 692-697 ◽  
Author(s):  
Andrew Clark ◽  
Randy J. Bowers ◽  
Derek O. Northwood
Keyword(s):  
Heat Treatment ◽  
Residual Stress ◽  
Retained Austenite ◽  
Compressive Residual Stress ◽  
Surface Residual Stress ◽  
Depth Profiles ◽  
Size And Shape ◽  
Austenite Content ◽  
Treatment Conditions ◽  
The Difference

The effects of heat treatment on distortion, residual stress, and retained austenite were compared for case-carburized 4320 steel, in both the austempered and quench-and-tempered condition. Navy C-ring samples were used to quantify both size and shape distortions, as well as residual stress. The austempering heat treatment produced less distortion and a higher surface residual stress. Both hoop and axial stresses were measured; the difference between them was less than seven percent in all cases. Depth profiles were obtained for residual stress and retained austenite from representative C-ring samples for the austempered and quench-and-tempered heat treatment conditions. Austempering maintained a compressive residual stress to greater depths than quench-and-tempering. Quench-and-tempering also resulted in lower retained austenite amounts immediately beneath the surface. However, for both heat treatments, the retained austenite content was approximately one percent at depths greater than 0.5 mm.

scholarly journals Evaluation of Wear Behaviour in Metallic Binders Employed in Diamond Tools for Cutting Stone

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3988
Author(s):  
Fátima Ternero ◽  
Pedro M. Amaral ◽  
Jorge Cruz Fernandes ◽  
Luís Guerra Rosa
Keyword(s):  
Wear Behavior ◽  
Wear Behaviour ◽  
Empirical Expression ◽  
Testing Conditions ◽  
Diamond Tools ◽  
Test Methodology ◽  
Different Types ◽  
Stone Material ◽  
The Difference ◽  
Wear Tests

A type of disc-on-plate test methodology was used to determine the wear behavior of metallic binders employed in the manufacturing of diamond impregnated tools. The disc consists of a special circular wheel that allows the binder materials alone (i.e., without diamond, but sintered under conditions identical to those of the complete tool) to be tested against a plate of stone material under pre-determined testing conditions. The testing conditions are intended to be equivalent to those used in the industrial processes. Using plates of five types of granite and one type of marble, this work comprises wear tests of 15 different types of metallic binders and two sintering modes conducted under, at least, three different values of contact-force. The analysis of the results demonstrated that the wear of the binders can be related to their mechanical properties through an empirical expression. The larger the difference between the characteristics of the tribological pair (binder versus stone), the higher is the correlation between the experimental wear data and the values given by the empirical expression. The relationships presented in this work allow predicting the wear behavior of the binder, and therefore may help in the design process of diamond tools. There was a clear difference between the wear behavior of metallic binders when they were employed against the two main classes of stone under analysis (marble and granite).

The opposite and antagonistic effects of the closely related POU family transcription factors Brn-3a and Brn-3b on the activity of a target promoter are dependent on differences in the POU domain

1994 ◽  
Vol 14 (10) ◽  
pp. 6907-6914
Author(s):  
P J Morris ◽  
T Theil ◽  
C J Ring ◽  
K A Lillycrop ◽  
T Moroy ◽  
...  
Keyword(s):  
Transcription Factors ◽  
Promoter Activity ◽  
Group Iv ◽  
Promoter Activation ◽  
Antagonistic Effects ◽  
Pou Domain ◽  
Close Relationship ◽  
Two Factors ◽  
The Difference ◽  
Target Promoter

The Brn-3a, Brn-3b, and Brn-3c POU family transcription factors are closely related to one another and are members of the group IV subfamily of POU factors. Here we show that despite this close relationship, the factors have different effects on the activity of a target promoter: Brn-3a and Brn-3c stimulate the promoter whereas Brn-3b represses it. Moreover, Brn-3b can antagonize the stimulatory effect of Brn-3a on promoter activity and can also inhibit promoter activation by the Oct-2.1 POU factor. The difference in the transactivation activities of Brn-3a and Brn-3b is dependent upon the C-terminal region containing the POU domain of the two proteins, since exchange of this domain between the two factors converts Brn-3a into a repressor and Brn-3b into an activator.

scholarly journals LOGICAL REASONING ANALYSIS BASED ON HIPPOCRATES PERSONALITY TYPES

Aksioma ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 57-73
Author(s):  
Nurdin Nurdin ◽  
Ita Sarmita Samad ◽  
Sardia Sardia
Keyword(s):  
Problem Solving ◽  
Mathematical Problem ◽  
Logical Reasoning ◽  
Personality Types ◽  
The Body ◽  
Mathematical Problem Solving ◽  
Different Types ◽  
Ways Of Thinking ◽  
The Difference ◽  
Descriptive Qualitative

Abstract: The theory distinguishes human based on four different personality types such as: sanguine, choleric, melancholic, and phlegmatic. Different types of personality caused by differences in the dominant fluid in the body. These differences will result in terms of behavior, ways of thinking and to get along. The type of this research that is descriptive qualitative which it is describing the logical reasoning based on Hippocrates personality types. The logical reasoning is analyzed through the four types of personality in relation to mathematical problem solving. The Analysis is done based on the logical reasoning indicator/ subindicator and the steps of problem solving stated by Polya. The result shows that there is a reasoning difference on each type of personalities. The difference can be terms of the strenght or the weakness. Sanguine is quicker in understanding problems and communicating results, choleric is more accelerated in work, melancholic is more perfect at work, and  phlegmatic is superior in terms of accuracy. Keywords: Logical reasoning, Hippocrates, sanguine, choleric, melancholic, phlegmatic

Sign in / Sign up

Export Citation Format

Share Document