Broadband high gain cavity resonator antenna using planar electromagnetic bandgap (EBG) superstrate

2022 ◽  
pp. 1-12
Author(s):  
Soumik Dey ◽  
Sukomal Dey
Keyword(s):  
Patch Antenna ◽  
Impedance Matching ◽  
Cavity Resonator ◽  
High Gain ◽  
Center Frequency ◽  
Electromagnetic Bandgap ◽  
Gain Enhancement ◽  
Rectangular Patch ◽  
Fabry Perot ◽  
Rectangular Microstrip Antenna

Abstract This paper presents a broadband miniaturized Fabry–Perot cavity resonator antenna (CRA) made of novel electromagnetic bandgap (EBG) superstrate as partially reflecting surface (PRS) and reactive impedance surface (RIS) backed rectangular patch antenna. To the best of the authors' knowledge, the proposed EBG exhibits the highest stopband bandwidth (BW) with a bandgap existing between 7.37 and 12.4 GHz (50.9%). Frequency-selective property of the EBG is utilized under plane wave incidence to demonstrate it as PRS superstrate in CRA antenna. The cavity is excited with a rectangular microstrip antenna which is made of two dielectric substrates with an additional RIS layer sandwiched between them. The RIS provides wideband impedance matching of the primary feed antenna. A 7 × 7 array of the EBG superstrate is loaded over the patch antenna having an overall lateral dimension of only 45 × 45 mm2 or 1.62 λ0 × 1.62 λ0 where λ0 is the free space wavelength at the center frequency of 10.8 GHz. The proposed Fabry–Perot CRA (FP-CRA) achieves gain enhancement of 6.59 dB as compared with the reference antenna and has a 10 dB return loss BW of 23.79% from 10.07 to 12.79 GHz. A prototype of the FP-CRA is fabricated and experimentally tested with single and dual layers of EBG superstrate. Measured results show BWs of 21.5 and 24.8% for the two cases with peak realized gain of 12.05 and 14.3 dBi, respectively. Later a four-element antenna array with corporate feeding is designed as the primary feed of the CRA. The simulation result shows a flat gain of >13 dBi with gain variation <1.2 dB over the impedance BW of 13.2%.

scholarly journals High-gain cavity backed patch antenna arrays at 140 GHz based on LTCC technology

2019 ◽  
Vol 11 (08) ◽  
pp. 829-834 ◽  
Author(s):  
Zihang Qi ◽  
Xiuping Li ◽  
Jinjin Chu ◽  
Jun Xiao ◽  
Hua Zhu
Keyword(s):  
Antenna Arrays ◽  
Patch Antenna ◽  
Impedance Matching ◽  
High Gain ◽  
Ceramic Technology ◽  
Antenna Element ◽  
Maximum Gain ◽  
Gain Enhancement ◽  
High Gain Antenna ◽  
Element Array

AbstractIn this paper, high-gain cavity backed patch antenna arrays are proposed based on low temperature co-fired ceramic technology at 140 GHz. By introducing a substrate integrated cavity to the patch antenna element, the gain is enhanced by 3.3 dB. Moreover, a rectangular ring is loaded around the patch for better impedance matching and further gain enhancement. The final simulated maximum gain of the proposed antenna element is 9.8 dBi. Based on the proposed high-gain antenna element, a 4 × 4-element array and an 8 × 8- element array are presented. The 4 × 4-element array shows a measured maximum gain of 16.9 dBi with 9.5 GHz bandwidth (136.2–145.7 GHz) and the 8 × 8-element array shows a measured maximum gain of 21.8 dBi with 9.8 GHz bandwidth(136.7–146.5 GHz), respectively.

scholarly journals A Rectangular Patch Antenna based on Flexible and Non-Flexible Substrates for Wireless Applications

2019 ◽  
Vol 8 (3) ◽  
pp. 8796-8804
Keyword(s):  
Patch Antenna ◽  
Microstrip Antenna ◽  
Communication Systems ◽  
Low Cost ◽  
Flexible Substrate ◽  
Impedance Matching ◽  
Polyimide Film ◽  
Center Frequency ◽  
Wireless Applications ◽  
Rectangular Patch

Microstrip antenna is one of the most popular types of printed antenna. It plays an excellent role in today’s world of wireless communication systems. Microstrip antenna offers the advantages of thin profile, light weight, low cost, ease of fabrication and compatibility with the integrated circuitry. In this paper, the design of a rectangular patch antenna based on flexible and non-flexible substrate is presented. First a simple rectangular shape patch antenna using microstrip feeding based on FR4 substrate is designed. The designed antenna operates at a center frequency 2.3 GHz with bandwidth ranging from 2.25 to 2.35 GHz (100 MHz). The same rectangular patch is subjected to two different flexible substrate i.e. Kapton polyimide film with thickness of 0.82 mm and Kapton polyimide film with thickness of 0.85 mm. With Kapton polyimide as substrate having thickness of 0.82 mm resulted in a center frequency of 2.4 GHz with bandwidth ranging from 2.36 to 2.45 GHz (90 MHz). With Kapton polyimide as substrate having thickness of 0.85 mm, the antenna provides a center frequency at 2.3 GHz, with bandwidth ranging from 2.25 to 2.35 GHz (100 MHz). The other radiational parameters (such as impedance matching, radiation pattern, radiation efficiency and gain) from all the three substrate are studied. The antenna based on FR4 substrate is finally fabricated and its results are compared with the simulated ones.

scholarly journals Performance Improvement of Substrate Integrated Cavity Fed Dipole Array Antenna Using ENZ Metamaterial for 5G Applications

Sensors ◽  
2021 ◽  
Vol 22 (1) ◽  
pp. 125
Author(s):  
Shaza El-Nady ◽  
Rania R. Elsharkawy ◽  
Asmaa I. Afifi ◽  
Anwer S. Abd El-Hameed
Keyword(s):  
Coplanar Waveguide ◽  
Impedance Matching ◽  
High Gain ◽  
Dipole Antenna ◽  
Center Frequency ◽  
Antenna Element ◽  
Gain Enhancement ◽  
Radiated Power ◽  
Low Profile ◽  
Unit Cells

This paper exhibits a high-gain, low-profile dipole antenna array (DAA) for 5G applications. The dipole element has a semi-triangular shape to realize a simple input impedance regime. To reduce the overall antenna size, a substrate integrated cavity (SIC) is adopted as a power splitter feeding network. The transition between the SIC and the antenna element is achieved by a grounded coplanar waveguide (GCPW) to increase the degree of freedom of impedance matching. Epsilon-near-zero (ENZ) metamaterial technique is exploited for gain enhancement. The ENZ metamaterial unit cells of meander shape are placed in front of each dipole perpendicularly to guide the radiated power into the broadside direction. The prospective antenna has an overall size of 2.58 λg3 and operates from 28.5 GHz up to 30.5 GHz. The gain is improved by 5 dB compared to that of the antenna without ENZ unit cells, reaching 11 dBi at the center frequency of 29.5 GHz. Measured and simulated results show a reasonable agreement.

Coplanar waveguide-fed ISM band implantable crossed-type triangular slot antenna for biomedical applications

2013 ◽  
Vol 6 (2) ◽  
pp. 167-172 ◽  
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Biomedical Applications ◽  
Biomedical Application ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
High Gain ◽  
Slot Antenna ◽  
Center Frequency ◽  
Ism Band ◽  
High Data ◽  
Implantable Antenna

A novel coplanar waveguide fed Industrial, Scientific, and Medical (ISM) band implantable crossed-type triangular slot antenna is proposed for biomedical applications. The antenna operates at the center frequency of 2450 MHz, which is in ISM band, to support GHz wideband communication for high-data rate implantable biomedical application. The size of the antenna is 78 mm3 (10 mm × 12 mm × 0.65 mm). The simulated and measured bandwidths are 7.9 and 8.2% at the resonant frequency of 2.45 GHz. The specific absorption rate distribution induced by the implantable antenna inside a human body tissue model is evaluated. The communication between the implanted antenna and external device is also examined. The proposed antenna has substantial merits such as miniaturization, lower return loss, better impedance matching, and high gain over other implanted antennas.

scholarly journals A Novel Circular Slotted Microstrip-Fed Patch Antenna with three Triangle Shape Defected Ground Structure for Multiband Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 56-63 ◽  
Author(s):  
A. Jaiswal ◽  
R. K. Sarin ◽  
B. Raj ◽  
S. Sukhija
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Impedance Matching ◽  
Ground Plane ◽  
Defected Ground Structure ◽  
Ground Structure ◽  
Resonant Frequencies ◽  
Wireless Applications ◽  
Rectangular Patch ◽  
Miniaturized Antenna

In this paper, a novel circular slotted rectangular patch antenna with three triangle shape Defected Ground Structure (DGS) has been proposed. Radiating patch is made by cutting circular slots of radius 3 mm from the three sides and center of the conventional rectangular patch structure and three triangle shape defects are presented on the ground layer. The size of the proposed antenna is 38 X 25 mm2. Optimization is performed and simulation results have been obtained using Empire XCcel 5.51 software. Thus, a miniaturized antenna is designed which has three impedance bandwidths of 0.957 GHz,  0.779 GHz, 0.665 GHz with resonant frequencies at 3.33 GHz, 6.97 GHz and 8.59 GHz and the corresponding return loss at the three resonant frequencies are -40 dB, -43 dB and -38.71 dB respectively. A prototype is also fabricated and tested. Fine agreement between the measured and simulated results has been obtained. It has been observed that introducing three triangle shape defects on the ground plane results in increased bandwidth, less return loss, good radiation pattern and better impedance matching over the required operating bands which can be used for wireless applications and future 5G applications.

scholarly journals Millimeter Wave Fabry-Perot Resonator Antenna Fed by CPW with High Gain and Broadband

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Xue-Xia Yang ◽  
Guan-Nan Tan ◽  
Bing Han ◽  
Hai-Gao Xue
Keyword(s):  
Millimeter Wave ◽  
Coplanar Waveguide ◽  
Dielectric Substrate ◽  
High Gain ◽  
Center Frequency ◽  
Impedance Bandwidth ◽  
Gain Bandwidth ◽  
Broad Bandwidth ◽  
Low Profile ◽  
Fabry Perot

A novel millimeter wave coplanar waveguide (CPW) fed Fabry-Perot (F-P) antenna with high gain, broad bandwidth, and low profile is reported. The partially reflective surface (PRS) and the ground form the F-P resonator cavity, which is filled with the same dielectric substrate. A dual rhombic slot loop on the ground acts as the primary feeding antenna, which is fed by the CPW and has broad bandwidth. In order to improve the antenna gain, metal vias are inserted surrounding the F-P cavity. A CPW-to-microstrip transition is designed to measure the performances of the antenna and extend the applications. The measured impedance bandwidth ofS11less than −10 dB is from 34 to 37.7 GHz (10.5%), and the gain is 15.4 dBi at the center frequency of 35 GHz with a 3 dB gain bandwidth of 7.1%. This performance of the antenna shows a tradeoff among gain, bandwidth, and profile.

scholarly journals Low Cross-Polarization Improved-Gain Rectangular Patch Antenna

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1189 ◽  
Author(s):  
Anurag Singh ◽  
Sandip Vijay ◽  
Rudra Narayan Baral
Keyword(s):  
Patch Antenna ◽  
Frequency Selective Surface ◽  
Cross Polarization ◽  
Gain Enhancement ◽  
Rectangular Patch ◽  
Shorting Pin ◽  
Half Power ◽  
Broadside Radiation ◽  
Polarization Level ◽  
Good Agreement

In this paper, a low cross-polarization improved-gain rectangular patch antenna is presented. A patch-ground shorting pin with defected patch structure (DPS) is introduced to suppress the cross-polarization level. A High Reflective Frequency Selective Surface (HRFSS) superstrate is designed and placed over the proposed antenna at an optimized position to intensify the gain. To characterize the unit-cell of the superstrate, its transmission characteristics are extracted and discussed. Integration of the superstrate achieves a beam contraction resulting in a gain enhancement to 10.65 dBi. The proposed antenna has perfect broadside radiation with a cross-polarization level of below −30 dB in the entire half power beamwidth. The prototype of the antenna exhibits good agreement between experimental and simulated results.

scholarly journals Metamaterial extended CSRR based monopole antenna for wideband applications

2017 ◽  
Vol 7 (1.1) ◽  
pp. 461 ◽  
Author(s):  
Pronami Bora ◽  
Mona Mudaliar ◽  
Yuvraj Baburao Dhanade ◽  
K Sreelakshm ◽  
Chayan Paul ◽  
...  
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Impedance Matching ◽  
Monopole Antenna ◽  
High Frequency Structure Simulator ◽  
Rectangular Patch ◽  
Measurement Results ◽  
Defected Ground Structures ◽  
Ground Structures ◽  
Ku Band

A metamaterial extended microstrip rectangular patch antenna with CSRR loading and defected ground structures(DGS) is proposed for wideband applications with band notching at the frequencies of KU band. The proposed antenna is designed by embedding it on Rogers RT/Duroid 5880 substrate with good impedance matching of 50 Ω at the feedline.The high frequency structure simulator (HFSS) is used to design and simulate the antennas parameters in the operating band. Measurement results confirm the antenna characteristics as predicted in the simulation with a slight shift in frequencies.

Sign in / Sign up

Export Citation Format

Share Document