scholarly journals Chip-scale optical airflow sensor

2022 ◽  
Vol 8 (1) ◽  
Author(s):  
Yumeng Luo ◽  
Xiaoshuai An ◽  
Liang Chen ◽  
Kwai Hei Li
Keyword(s):  
Light Emission ◽  
Fast Response ◽  
Measurement Range ◽  
Pdms Membrane ◽  
Great Promise ◽  
Integration Scheme ◽  
Molding Process ◽  
Practical Applications ◽  
Wide Range ◽  
Airflow Sensor

AbstractAirflow sensors are an essential component in a wide range of industrial, biomedical, and environmental applications. The development of compact devices with a fast response and wide measurement range capable of in situ airflow monitoring is highly desirable. Herein, we report a miniaturized optical airflow sensor based on a GaN chip with a flexible PDMS membrane. The compact GaN chip is responsible for light emission and photodetection. The PDMS membrane fabricated using a droplet-based molding process can effectively transform the airflow stimuli into optical reflectance changes that can be monitored by an on-chip photodetector. Without the use of external components for light coupling, the proposed sensor adopting the novel integration scheme is capable of detecting airflow rates of up to 53.5 ms−1 and exhibits a fast response time of 12 ms, holding great promise for diverse practical applications. The potential use in monitoring human breathing is also demonstrated.

Differential Reflectometry of Fiber Bragg Gratings

2010 ◽  
Vol 437 ◽  
pp. 324-328
Author(s):  
Yuriy N. Kulchin ◽  
Anatoly M. Shalagin ◽  
Oleg B. Vitrik ◽  
Sergey A. Babin ◽  
Anton V. Dyshlyuk ◽  
...  
Keyword(s):  
Fiber Optic ◽  
Measurement Range ◽  
Light Power ◽  
Practical Applications ◽  
Fiber Optic Line ◽  
Optical Layout ◽  
Wide Range ◽  
Fbg Sensors ◽  
Interrogation Technique ◽  
Modulated Signals

A reflectometric approach is proposed for interrogation of multiple fiber Bragg grating (FBG) sensors recorded in a single fiber optic line, based on the differential registration FBGs’ response to a short probing laser pulse using conventional OTDR. A special optical layout has been developed allowing transformation of FBG’s spectrally modulated signals into intensity modulated signals and at the same time eliminating the susceptibility of the system to light power fluctuations. Threshold sensitivity of the method amounted to ~50 μstrain within the measurement range of ~4000 μstrain. The maximum number of FBGs interrogated by the proposed technique is estimated at several hundred, which by far surpasses the requirements of most practical applications. Due to its simplicity, efficiency and usage of conventional OTDR equipment the proposed FBG interrogation technique can find a wide range of applications, in particular in structural health monitoring.

A New Detector System For The HB5 Stem Instrument

1985 ◽  
Vol 43 ◽  
pp. 134-135
Author(s):  
J.M. Cowley
Keyword(s):  
Dark Field ◽  
Detector System ◽  
Electron Holography ◽  
Small Specimen ◽  
Bright Field ◽  
Multiple Images ◽  
Practical Applications ◽  
Wide Range ◽  
Diffraction Patterns ◽  
Operational Modes

The HB5 STEM instrument at ASU has been modified previously to include an efficient two-dimensional detector incorporating an optical analyser device and also a digital system for the recording of multiple images. The detector system was built to explore a wide range of possibilities including in-line electron holography, the observation and recording of diffraction patterns from very small specimen regions (having diameters as small as 3Å) and the formation of both bright field and dark field images by detection of various portions of the diffraction pattern. Experience in the use of this system has shown that sane of its capabilities are unique and valuable. For other purposes it appears that, while the principles of the operational modes may be verified, the practical applications are limited by the details of the initial design.

Phytochemical evaluation of leaf extracts of Naringi crenulata (roxb.) Nicolson

2016 ◽  
Vol 5 (11) ◽  
pp. 5110
Author(s):  
Sartaj Ahmad Allayie ◽  
Mushtaq Ahmed Parray* ◽  
Bilal Ahmad Bhat ◽  
S. Hemalatha
Keyword(s):  
Quantitative Analysis ◽  
Solvent System ◽  
Great Promise ◽  
Phytochemical Analysis ◽  
Bioactive Constituents ◽  
Leaf Extracts ◽  
Traditional Medicines ◽  
The People ◽  
Wide Range ◽  
Rf Values

The use of traditional medicines holds a great promise as an easily available source as effective medicinal agents to cure a wide range of ailments among the people particularly in tropical developing countries like India. The present study investigates the qualitative and quantitative analysis of the major bioactive constituents of N. crenulata leaf extracts. The extractive values of aqueous, acetone and chloroform extracts were found to be 11.34, 4.24 and 6.06 respectively. Qualitative phytochemical analysis of these three solvent extracts confirm the presence of Alkaloids, Saponins, Flavonoids and Phenolic compounds in all the three extracts; however, these phytochemicals were more significant in aqueous extract. Quantitative analysis was carried out using TLC method by different solvent system. Amongst various solvent systems, Butanol: acetic acid: water (9: 0.9: 0.1 v/v/v) shows maximum resolution and number of spots produced at long UV (365 nm) and under iodine vapours. The TLC chromatograms constituted different coloured phytochemical compounds with different Rf values. It can be conveniently used to evaluate the quality of different area samples. This indicates that the leaves can be useful for treating different diseases because the therapeutic activity of a plant is due to the presence of particular class of compounds and thus can serve as potential sources of useful drugs in future.

scholarly journals A Resonant Pressure Microsensor with a Wide Pressure Measurement Range

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 382
Author(s):  
Chao Xiang ◽  
Yulan Lu ◽  
Chao Cheng ◽  
Junbo Wang ◽  
Deyong Chen ◽  
...  
Keyword(s):  
Chemical Mechanical Planarization ◽  
Measurement Range ◽  
Silicon On Insulator ◽  
Anodic Bonding ◽  
Pressure Measurements ◽  
Quality Factors ◽  
Deep Reactive Ion Etching ◽  
Wide Range ◽  
Form Pressure ◽  
Silicon Islands

This paper presents a resonant pressure microsensor with a wide range of pressure measurements. The developed microsensor is mainly composed of a silicon-on-insulator (SOI) wafer to form pressure-sensing elements, and a silicon-on-glass (SOG) cap to form vacuum encapsulation. To realize a wide range of pressure measurements, silicon islands were deployed on the device layer of the SOI wafer to enhance equivalent stiffness and structural stability of the pressure-sensitive diaphragm. Moreover, a cylindrical vacuum cavity was deployed on the SOG cap with the purpose to decrease the stresses generated during the silicon-to-glass contact during pressure measurements. The fabrication processes mainly contained photolithography, deep reactive ion etching (DRIE), chemical mechanical planarization (CMP) and anodic bonding. According to the characterization experiments, the quality factors of the resonators were higher than 15,000 with pressure sensitivities of 0.51 Hz/kPa (resonator I), −1.75 Hz/kPa (resonator II) and temperature coefficients of frequency of 1.92 Hz/°C (resonator I), 1.98 Hz/°C (resonator II). Following temperature compensation, the fitting error of the microsensor was within the range of 0.006% FS and the measurement accuracy was as high as 0.017% FS in the pressure range of 200 ~ 7000 kPa and the temperature range of −40 °C to 80 °C.

scholarly journals Ring-Forming Polymerization toward Perfluorocyclobutyl and Ortho-Diynylarene-Derived Materials: From Synthesis to Practical Applications

Materials ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1486
Author(s):  
Eugene B. Caldona ◽  
Ernesto I. Borrego ◽  
Ketki E. Shelar ◽  
Karl M. Mukeba ◽  
Dennis W. Smith
Keyword(s):  
Chemical Resistance ◽  
Structural Features ◽  
Review Article ◽  
Aryl Ether ◽  
Aromatic Rings ◽  
Practical Applications ◽  
Repeat Units ◽  
Wide Range ◽  
Synthetic Routes ◽  
The Cost

Many desirable characteristics of polymers arise from the method of polymerization and structural features of their repeat units, which typically are responsible for the polymer’s performance at the cost of processability. While linear alternatives are popular, polymers composed of cyclic repeat units across their backbones have generally been shown to exhibit higher optical transparency, lower water absorption, and higher glass transition temperatures. These specifically include polymers built with either substituted alicyclic structures or aromatic rings, or both. In this review article, we highlight two useful ring-forming polymer groups, perfluorocyclobutyl (PFCB) aryl ether polymers and ortho-diynylarene- (ODA) based thermosets, both demonstrating outstanding thermal stability, chemical resistance, mechanical integrity, and improved processability. Different synthetic routes (with emphasis on ring-forming polymerization) and properties for these polymers are discussed, followed by their relevant applications in a wide range of aspects.

scholarly journals Sensing of Nickel(II) Ions by Immobilizing Ligands and Using Different SPEs

2021 ◽  
Vol 6 (1) ◽  
pp. 2
Author(s):  
Liliana Anchidin-Norocel ◽  
Sonia Amariei ◽  
Gheorghe Gutt
Keyword(s):  
Bismuth Oxide ◽  
Human Population ◽  
Raw Materials ◽  
Sensor Technology ◽  
Cyclic Voltammogram ◽  
Accurate Analysis ◽  
Nickel Allergy ◽  
Nickel Ions ◽  
Practical Applications ◽  
Wide Range

The aim of this paper is the development of a sensor for the quantification of nickel ions in food raw materials and foods. It is believed that about 15% of the human population suffers from nickel allergy. In addition to digestive manifestations, food intolerance to nickel may also have systemic manifestations, such as diffuse dermatitis, diffuse itching, fever, rhinitis, headache, altered general condition. Therefore, it is necessary to control this content of nickel ions for the health of the human population by developing a new method that offers the advantages of a fast, not expensive, in situ, and accurate analysis. For this purpose, bismuth oxide-screen-printed electrodes (SPEs) and graphene-modified SPEs were used with a very small amount of dimethylglyoxime and amino acid L-histidine that were deposited. A potentiostat that displays the response in the form of a cyclic voltammogram was used to study the electrochemical properties of nickel standard solution with different concentrations. The results were compared and the most sensitive sensor proved to be bismuth oxide-SPEs with dimethylglyoxime (Bi2O3/C-dmgH2) with a linear response over a wide range (0.1–10 ppm) of nickel concentrations. Furthermore, the sensor shows excellent selectivity in the presence of common interfering species. The Bi2O3/C-dmgH2 sensor showed good viability for nickel analysis in food samples (cocoa, spinach, cabbage, and red wine) and demonstrated significant advancement in sensor technology for practical applications.

scholarly journals Alcohol-based highly conductive polymer for conformal nanocoatings on hydrophobic surfaces toward a highly sensitive and stable pressure sensor

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Jung Joon Lee ◽  
Srinivas Gandla ◽  
Byeongjae Lim ◽  
Sunju Kang ◽  
Sunyoung Kim ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Mechanical Stability ◽  
Exchange Process ◽  
Conductive Polymer ◽  
High Sensitivity ◽  
Fast Response ◽  
Pdms Surface ◽  
Practical Applications ◽  
Sensor Applications ◽  
Water Based

Abstract Conformal and ultrathin coating of highly conductive PEDOT:PSS on hydrophobic uneven surfaces is essential for resistive-based pressure sensor applications. For this purpose, a water-based poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) solution was successfully exchanged to an organic solvent-based PEDOT:PSS solution without any aggregation or reduction in conductivity using the ultrafiltration method. Among various solvents, the ethanol (EtOH) solvent-exchanged PEDOT:PSS solution exhibited a contact angle of 34.67°, which is much lower than the value of 96.94° for the water-based PEDOT:PSS solution. The optimized EtOH-based PEDOT:PSS solution exhibited conformal and uniform coating, with ultrathin nanocoated films obtained on a hydrophobic pyramid polydimethylsiloxane (PDMS) surface. The fabricated pressure sensor showed high performances, such as high sensitivity (−21 kPa−1 in the low pressure regime up to 100 Pa), mechanical stability (over 10,000 cycles without any failure or cracks) and a fast response time (90 ms). Finally, the proposed pressure sensor was successfully demonstrated as a human blood pulse rate sensor and a spatial pressure sensor array for practical applications. The solvent exchange process using ultrafiltration for these applications can be utilized as a universal technique for improving the coating property (wettability) of conducting polymers as well as various other materials.

Polyhedral Oligomeric Silsesquioxane (POSS)-Modified Thermoplastic and Thermosetting Nanocomposites: A Review

2008 ◽  
Vol 16 (8) ◽  
pp. 483-500 ◽  
Author(s):  
Jianqing Zhao ◽  
Yi Fu ◽  
Shumei Liu
Keyword(s):  
Processing Condition ◽  
Polyhedral Oligomeric Silsesquioxane ◽  
Physical And Mechanical Properties ◽  
Molecular Geometry ◽  
Surface Hydrophobicity ◽  
Dielectric Constants ◽  
Great Promise ◽  
Wide Range ◽  
Oligomeric Silsesquioxane ◽  
Mechanical Strengths

Polyhedral oligomeric silsesquioxane (POSS) nanoparticles have been successfully incorporated into thermoplastic and thermoset polymers via copolymerization, grafting, blending, surface bonding, or other transformations. A great promise in the development of a wide range of POSS-containing nanocomposites with diversely improved properties has been displayed. Thermal properties, viscoelastic properties, mechanical strengths, dielectric constants, surface hydrophobicity and flame-retardancy of the nanocomposites are easily varied to target properties by adjusting POSS structure, crosslink density, processing condition, etc. Investigations on the effects of POSS molecular geometry, composition, and concentration on physical and mechanical properties of resultant POSS-modified thermoplastic and thermosetting nanocomposites have been carefully reviewed in this article.

scholarly journals Activation of the receptor tyrosine kinase RET improves long-term hematopoietic stem cell outgrowth and potency

Blood ◽  
2020 ◽  
Vol 136 (22) ◽  
pp. 2535-2547 ◽  
Author(s):  
W. Grey ◽  
R. Chauhan ◽  
M. Piganeau ◽  
H. Huerga Encabo ◽  
M. Garcia-Albornoz ◽  
...  
Keyword(s):  
Intracellular Signaling ◽  
Culture Conditions ◽  
Cellular Growth ◽  
Great Promise ◽  
Bone Marrow Niche ◽  
Hematopoietic Stem ◽  
Intracellular Signaling Pathway ◽  
Wide Range

Abstract Expansion of human hematopoietic stem cells (HSCs) is a rapidly advancing field showing great promise for clinical applications. Recent evidence has implicated the nervous system and glial family ligands (GFLs) as potential drivers of hematopoietic survival and self-renewal in the bone marrow niche; how to apply this process to HSC maintenance and expansion has yet to be explored. We show a role for the GFL receptor, RET, at the cell surface of HSCs in mediating sustained cellular growth, resistance to stress, and improved cell survival throughout in vitro expansion. HSCs treated with the key RET ligand/coreceptor complex, glial-derived neurotrophic factor and its coreceptor, exhibit improved progenitor function at primary transplantation and improved long-term HSC function at secondary transplantation. Finally, we show that RET drives a multifaceted intracellular signaling pathway, including key signaling intermediates protein kinase B, extracellular signal-regulated kinase 1/2, NF-κB, and p53, responsible for a wide range of cellular and genetic responses that improve cell growth and survival under culture conditions.

scholarly journals Assessment of Linearization Approaches for Multibody Dynamics Formulations

2017 ◽  
Vol 12 (4) ◽  
Author(s):  
Francisco González ◽  
Pierangelo Masarati ◽  
Javier Cuadrado ◽  
Miguel A. Naya
Keyword(s):  
Mechanical System ◽  
Multibody Dynamics ◽  
Equations Of Motion ◽  
Differential Algebraic Equations ◽  
Algebraic Equations ◽  
Practical Applications ◽  
Linearization Methods ◽  
Highly Nonlinear ◽  
Wide Range ◽  
The Way

Formulating the dynamics equations of a mechanical system following a multibody dynamics approach often leads to a set of highly nonlinear differential-algebraic equations (DAEs). While this form of the equations of motion is suitable for a wide range of practical applications, in some cases it is necessary to have access to the linearized system dynamics. This is the case when stability and modal analyses are to be carried out; the definition of plant and system models for certain control algorithms and state estimators also requires a linear expression of the dynamics. A number of methods for the linearization of multibody dynamics can be found in the literature. They differ in both the approach that they follow to handle the equations of motion and the way in which they deliver their results, which in turn are determined by the selection of the generalized coordinates used to describe the mechanical system. This selection is closely related to the way in which the kinematic constraints of the system are treated. Three major approaches can be distinguished and used to categorize most of the linearization methods published so far. In this work, we demonstrate the properties of each approach in the linearization of systems in static equilibrium, illustrating them with the study of two representative examples.

Sign in / Sign up

Export Citation Format

Share Document