In situ vacuum thermal mass spectroscopy for the selection of an environmentally friendly, energy saving catalytic additive and optimization of the process by a novel ignition mechanism

RSC Advances ◽  
2013 ◽  
Vol 3 (25) ◽  
pp. 9677
Author(s):  
Anil Gopala ◽  
Stefan Mahn ◽  
Ulrich Panne ◽  
Heinrich Kipphardt
Nanoscale ◽  
2021 ◽  
Author(s):  
Wei Bing ◽  
Faming Wang ◽  
Yuhuan Sun ◽  
Jinsong Ren ◽  
Xiaogang Qu

An environmentally friendly biomimetic strategy has been presented and validated for the catalytic hydrogenation reaction in live bacteria. In situ formed ultra-fine metal nanoparticles can realize highly efficient asymmetric hydrogenation reactions.


Author(s):  
Lingjiang Huang ◽  
Jian Kang

AbstractThe solar incidence on an indoor environment and its occupants has significant impacts on indoor thermal comfort. It can bring favorable passive solar heating and can result in undesired overheating (even in winter). This problem becomes more critical for high altitudes with high intensity of solar irradiance, while received limited attention. In this study, we explored the specific overheating and rising thermal discomfort in winter in Lhasa as a typical location of a cold climate at high altitudes. First, we evaluated the thermal comfort incorporating solar radiation effect in winter by field measurements. Subsequently, we investigated local occupant adaptive responses (considering the impact of direct solar irradiance). This was followed by a simulation study of assessment of annual based thermal comfort and the effect on energy-saving potential by current solar adjustment. Finally, we discussed winter shading design for high altitudes for both solar shading and passive solar use at high altitudes, and evaluated thermal mass shading with solar louvers in terms of indoor environment control. The results reveal that considerable indoor overheating occurs during the whole winter season instead of summer in Lhasa, with over two-thirds of daytime beyond the comfort range. Further, various adaptive behaviors are adopted by occupants in response to overheating due to the solar radiation. Moreover, it is found that the energy-saving potential might be overestimated by 1.9 times with current window to wall ratio requirements in local design standards and building codes due to the thermal adaption by drawing curtains. The developed thermal mass shading is efficient in achieving an improved indoor thermal environment by reducing overheating time to an average of 62.2% during the winter and a corresponding increase of comfort time.


1982 ◽  
Vol 15 ◽  
Author(s):  
W. S. Fyfe

ABSTRACTSelection of the best rock types for radwaste disposal will depend on their having minimal permeability, maximal flow dispersion, minimal chance of forming new wide aperture fractures, maximal ion retention, and minimal thermal and mining disturbance. While no rock is perfect, thinly bedded complex sedimentary sequences may have good properties, either as repository rocks, or as cover to a repository.Long time prediction of such favorable properties of a rock at a given site may be best modelled from studies of in situ rock properties. Fracture flow, dispersion history, and geological stability can be derived from direct observations of rocks themselves, and can provide the parameters needed for convincing demonstration of repository security for appropriate times.


2013 ◽  
Vol 135 ◽  
pp. 396-402 ◽  
Author(s):  
Chuang Xue ◽  
Jingbo Zhao ◽  
Fangfang Liu ◽  
Congcong Lu ◽  
Shang-Tian Yang ◽  
...  

2012 ◽  
Vol 105 ◽  
pp. 1-11 ◽  
Author(s):  
Y.W. Chiang ◽  
R.M. Santos ◽  
K. Ghyselbrecht ◽  
V. Cappuyns ◽  
J.A. Martens ◽  
...  

2018 ◽  
Vol 10 (7) ◽  
pp. 2548 ◽  
Author(s):  
Mariangela De Vita ◽  
Paolo Beccarelli ◽  
Eleonora Laurini ◽  
Pierluigi De Berardinis

The aim of this research, carried out in collaboration with Maco Technology Inc., was to analyse the energy performance of temporary textile structures that are often used to host itinerant events. This paper illustrates the dynamic simulations carried on the Ducati Pavilion, designed by Maco Technology, which hosted Ducati staff during the different stages of the Superbike World Championship. Specific aspects relating to the structural/constructive system of the project were also analysed. The theme of energy saving and carbon reduction is of great importance in temporary and itinerant structures and environmental sustainability in relation to the materials used, storage, re-use, mode of transport and ability to respond efficiently to the climatic conditions of the installation sites is an important aspect. The Ducati Pavilion was modelled and analysed from an energy point of view using Design Builder software. Ways of improving performance were analysed under summer conditions. The paper focuses on the importance of optimizing the performance of textile envelopes: the methodology proposed allows visible savings in terms of energy consumption and achieves good levels of environmental comfort in temporary buildings with low thermal mass structure.


Ars Adriatica ◽  
2016 ◽  
pp. 103
Author(s):  
Barbara Španjol-Pandelo

Matteo Moronzon, a member of the Venetian family of woodcarvers, was mentioned for the first time in 1407 according to the present known archival documents. Probably after being trained in his father's workshop in Venice, he moved to Zadar with his family – his wife Francisca and sons Pietro and Francesco. In 1418 he undertook the commission of furnishing carved choir stalls for the cathedral of St. Anastasia in Zadar. Various archival documents testify that Matteo lived and worked in Zadar for many years. Therefore it can be assumed that he probably founded his own workshop in Zadar where his son Francesco was trained too. Apart from the attempt to reconstruct Matteo's life and career, the aim of this paper is to interpret one important woodcarving work of art preserved in situ: choir stalls in the former cathedral of Rab, today the arch parish church of the Assumption of the Blessed Virgin Mary in Rab. Without doubt Matteo was the master carver in the production of the choir stalls in Zadar. Since he lived in Zadar it was not unusual that he had the main role in carving the stalls. In Zadar the selection of motives is more balanced and there are no significant differences in the modelling of decorative elements. However, the question whether Matteo carved absolutely everything or he had assistants arises. Considering the amount of work that had to be done it must be assumed that he had assistants who participated in work and helped him to shape the stalls. However, in literature Matteo was considered the only and undisputed author of the choir stalls in Zadar, mostly because of the preserved document. The analysis of the choir stalls in Rab by Ivo Petricioli as well as their evident formal and stylistic similarities with the stalls from the cathedral in Zadar have led to the general acceptance of the hypothesis that they were carved at the workshop of Matteo Moronzon. However, a comprehensive comparative analysis that could confirm that hypothesis was still missing. The analysis of the details and the whole led to the overall conclusion that there were a huge number of similarities between the choir stalls in Rab and Zadar. Therefore it was concluded that Matteo was the principal designer of the choir stalls in Rab who also carved the best parts in Rab, while others, less successful parts, were made by his apprentices and assistants who at the time lived on the island of Rab. In this respect, if Matteo was accepted as the author of the choir stalls of the cathedral in Zadar he must also be accepted as the author of the choir stalls from the excathedral in Rab.


2015 ◽  
Author(s):  
Stefano Acunto ◽  
Luigi Piazzi ◽  
Francesco L. Cinelli ◽  
Anna Maria De Biasi ◽  
Lorenzo Pacciardi ◽  
...  

Transplantation of seagrasses is considered a useful method to favour the recovery of degraded meadows. Hence, many projects have been carried out worldwide and a manifold of techniques have been applied. However, the choice of transplantation procedures remains a main problem to be assessed. In order to optimize efforts and to minimize risks of plants loss, the applied methodologies should take into account typology of hosting substratum, hydrodynamic conditions, depth and seagrass species. Due to their fundamental ecological role in the Mediterranean coastal system, many restoration projects aiming to preserve Posidonia oceanica meadows took place in the last decades. Several transplantation techniques have produced different results. In fact the same transplanting methodology may originate diverse results under different environmental conditions. Recently, naturalistic engineering techniques developed on land, have been used for transplantations of P. oceanica. Pilot projects concerning small surfaces were carried out between 2006 and 2010. More recently, a large-scale program (0.1 km2) was realized in 2012 at Civitavecchia (Roma, Thyrrenian Sea). The applied technique consists basically of mattresses filled with sand coupled with a net covering able to hold steady in situ the plant rhizomes. These structures have been variously modified in time to be adapted to the different type of substratum and various hydrodynamic conditions of the transplanting sites. Following the results of these transplantation experiences, we analyzed pros and cons of the techniques in order to improve the methodology. Firstly, these techniques may be considered suitable to large-scale projects allowing to minimize transplantation times. Secondly, the rhizomes may be successfully fixed to the structures; the majority of the transplanted shoots was not damaged showing a very good vegetative vitality with the production of new rhizomes, leaves and roots few months after transplanting. Finally, this procedure is flexible, as the basic technique can be modified and tailored to the various environmental conditions of the different receiving site. However, the results obtained in different areas are highly heterogeneous suggesting that a careful selection of the hosting site is a focal point. To this aim, a pilot study before the beginning of large-scale project seems mandatory, providing a fundamental support to guarantee successful results.


2017 ◽  
Vol 16 (4) ◽  
pp. 289-297
Author(s):  
D. Yu. Snezgkov ◽  
S. N. Leonovich

The existing non-destructive testing system of structure concrete is actually orientated on the usage of longitudinal acoustical waves. This is due to simplicity of technical realization for measuring velocity (time) of acoustical pulse propagation in bulk concrete. But a reverse side of simple measuring procedure is a loss of additional information on concrete which is contained in the accepted acoustical signal. Therefore usage of an ultrasonic concrete testing method is limited by assessment of its strength. Joint usage of several wave types, so-called multi-wave testing, allows to refine metrology parameters of the ultrasonic method and to gain more information while determining physical and mechanical properties of concrete in laboratory and in situ conditions. The paper considers testing of elongated concrete elements and structures by an ultrasonic pulsing method on the basis of longitudinal subsurface and Rayleigh waves. It has been proposed to use methodology for time selection of wave components according to amplitude parameter and it has been applied for standard acoustical transformers with considerable reverberation time and not possessing spatial selectivity Basic principle of the proposed methodology is visual (according to oscillogram of the received signal) determination of characteristic time moments which are used for calculation of differential value of a propagation velocity in the Rayleigh wave impulse. The paper presents results pertaining to simulation of acoustical pulse propagation on the basis of 0.15 m and data of concrete ultrasonic in situ testing on measuring bases from 0.25 to 1.75 m. Advantage of large baseline for sonic test is a possibility for execution of a hundred percent inspection for surface of large-sized elements and structures, and so there is no need to make a selective inspection in some control areas as it is stipulated by provided by existing regulations. Responsivity of the Rayleigh wave parameters to near surface concrete defects permits quickly and efficiently to detect crack areas in a reinforced structure. Energy localization of a surface wave in a layer having width λ/2–λ provides a possibility to ignore reinforcement availability under appropriate selection of oscillation frequency. In addition to this, large measuring baseline makes it possible to lower effect of concrete structural inhomogeneity on statistical stability for pulse velocity assessment that ultimately reveals a possibility to register an appearance of concrete acoustical elasticity effect under in situ conditions.


Author(s):  
I Ketut Astawa ◽  
◽  
I Ketut Budarma ◽  
Cokorda Istri Sri Widhari ◽  
◽  
...  

Purpose: The purpose of this study is to examine the practice of selecting green suppliers conducted by companies to be environmentally friendly and how these practices have implications for purchasing green products in 5-star hotels in Bali. Research methods: This study is guided by the green supply chain management model and the green selection model. A descriptive research design is used. Data were collected using a questionnaire. The population consists of 63 employees from companies that supply room supplies, food & beverage, chemical, and Spa. Data were analyzed using SPSS and presented using tables, graphs, frequencies, and percentages. Results and discussions: The study revealed that the selection of environmentally friendly suppliers had a positive and significant effect on the implementation of environmentally friendly purchases. The implications of selecting green suppliers create new market opportunities. Hotel cooperation with suppliers is getting closer and mutually committed to operational purchasing activities. Conclusion: The study revealed that the selection of environmentally friendly suppliers had a positive and significant effect on the implementation of environmentally friendly purchases. The indication was that green supplier selection is a major factor that influences the implementation of green purchasing at 5 stars hotel in Bali.


Sign in / Sign up

Export Citation Format

Share Document