Biochemical Analysis of Hepatic Lipid in Alcoholic and Diabetic and Control Subjects

1983 ◽  
Vol 65 (6) ◽  
pp. 645-652 ◽  
Author(s):  
S. R. Cairns ◽  
T. J. Peters

1. Percutaneous needle biopsy specimens of liver were obtained from alcoholic, diabetic and control patients. Micro-methods of lipid separation and quantification were employed to determine the detailed nature of hepatic lipid. 2. Triglyceride is the major accumulating liver lipid in both alcoholic and diabetic patients. Cholesteryl ester levels were raised in both alcoholic and diabetic patients but only diabetic patients had significantly increased free cholesterol and phospholipid levels. Determination of phospholipid/free cholesterol ratios revealed a significant decrease in alcoholic cirrhosis compared with controls. 3. Fatty acid ester analysis of hepatic phospholipid and triglyceride revealed significant differences between alcoholic patients and controls but not between diabetic patients and controls. An increased ratio of non-essential/essential fatty acids was found in the patients with alcoholic liver disease whereas those of diabetic patients were similar to the controls.

Author(s):  
Amankwah K.S. ◽  
A.D. Weberg ◽  
R.C. Kaufmann

Previous research has revealed that passive (involuntary inhalation) tobacco smoking during gestation can have adverse effects upon the developing fetus. These prior investigations did not concentrate on changes in fetal morphology. This study was undertaken to delineate fetal neural abnormalities at the ultrastructural level in mice pups exposed in utero to passive maternal smoking.Pregnant study animals, housed in a special chamber, were subjected to cigarette smoke daily from conception until delivery. Blood tests for determination of carbon monoxide levels were run at 15-18 days gestation. Sciatic nerve tissue from experimental and control animals were obtained following spontaneous delivery and fixed in 2.5% gluteraldehyde in 0.1M cacodylate buffer pH 7.3. The samples were post-fixed in osmium ferrocyanide (1:1 mixture of 1.5% aqueous OSO4 and 2.5% K4 Fe(CN)6). Following dehydration, the tissues were infiltrated with and embedded in Spurr. Sections were stained with uranyl acetate and lead citrate.


1982 ◽  
Vol 48 (03) ◽  
pp. 289-293 ◽  
Author(s):  
B A van Oost ◽  
B F E Veldhuyzen ◽  
H C van Houwelingen ◽  
A P M Timmermans ◽  
J J Sixma

SummaryPlatelets tests, acute phase reactants and serum lipids were measured in patients with diabetes mellitus and patients with peripheral vascular disease. Patients frequently had abnormal platelet tests and significantly increased acute phase reactants and serum lipids, compared to young healthy control subjects. These differences were compared with multidiscriminant analysis. Patients could be separated in part from the control subjects with variables derived from the measurement of acute phase proteins and serum lipids. Platelet test results improved the separation between diabetics and control subjects, but not between patients with peripheral vascular disease and control subjects. Diabetic patients with severe retinopathy frequently had evidence of platelet activation. They also had increased acute phase reactants and serum lipids compared to diabetics with absent or nonproliferative retinopathy. In patients with peripheral vascular disease, only the fibrinogen concentration was related to the degree of vessel damage by arteriography.


Author(s):  
Prong Kongsubto ◽  
Sirarat Kongwudthiti

Abstract Organic solderability preservatives (OSPs) pad is one of the pad finishing technologies where Cu pad is coated with a thin film of an organic material to protect Cu from oxidation during storage and many processes in IC manufacturing. Thickness of OSP film is a critical factor that we have to consider and control in order to achieve desirable joint strength. Until now, no non-destructive technique has been proposed to measure OSP thickness on substrate. This paper reports about the development of EDS technique for estimating OSP thickness, starting with determination of the EDS parameter followed by establishing the correlation between C/Cu ratio and OSP thickness and, finally, evaluating the accuracy of the EDS technique for OSP thickness measurement. EDS quantitative analysis was proved that it can be utilized for OSP thickness estimation.


2019 ◽  
Vol 15 (3) ◽  
pp. 247-253 ◽  
Author(s):  
Salwa S. Hosny ◽  
Ahmed M. Bahaaeldin ◽  
Mohamed S. Khater ◽  
Meram M. Bekhet ◽  
Hayam A. Hebah ◽  
...  

<P>Background: Type 2 diabetes (T2DM) is a risk factor for Alzheimer’s disease and mild cognitive impairment. The etiology of cognitive impairment in people with T2DM is uncertain but, chronic hyperglycemia, cerebral micro vascular disease, severe hypoglycemia, and increased prevalence of macro vascular disease are implicated. </P><P> Objectives: To determine the serum levels of soluble vascular adhesion molecule (sVCAM-1) and highly sensitive C-reactive protein (hs-CRP) in elderly type 2 diabetics with mild cognitive impairment (MCI). Methods: Our study was conducted on 90 elderly subjects (aged 60 years old or more). They were divided into Group І, 30 patients with T2DM and mild cognitive impairment, group ІІ, 30 patients with T2DM without cognitive impairment and group III, 30 healthy subjects as a control group. They were subjected to history taking, full clinical examination, anthropometric measurement, the Addenbrooke’s Cognitive Examination III (ACE---III 2012), Fasting plasma glucose, 2 hours plasma glucose, HbA1c, lipid profile, protein/creatinine ratio, serum sVCAM-1 and hs-CRP. Results: Serum levels of sVCAM-1 in diabetic elderly patients with MCI were significantly higher (946.7 ± 162.01 ng/ml) than diabetic elderly patients without cognitive impairment (479.06 ± 65.27 ng/ml) and control (263.7 ± 72.05 ng/ml) with (P=0.002). Serum levels of Hs-CRP in diabetic elderly patients with MCI were significantly higher than as diabetic elderly patients without cognitive impairment and control with (P=0.005). Conclusion: Elderly diabetic patients with mild cognitive impairment have higher levels of soluble adhesion molecules and markers of low-grade systemic inflammation than other groups.</P>


2020 ◽  
Author(s):  
Mayli Lañas-Navarro ◽  
Jose Ipanaque-Calderon Sr ◽  
Fiorela E Solano

BACKGROUND Research on the use of the Internet in the medical field is experiencing many advances, including mobile applications, social networks, telemedicine. Its implementation in medical care and comprehensive patient management is a much discussed topic at present. OBJECTIVE This narrative review aims to understand the impact of the internet and social networks on the management of diabetes, both for patients and medical staff. METHODS The bibliographic search was carried out in the databases Pubmed, Virtual Health Library (VHL) and Lilacs between 2018 to 2020. RESULTS Multiple mobile applications have been created for the help and control of diabetic patients, as well as the implementation of online courses, improving the knowledge of health personnel applying them in the field of telemedicine. CONCLUSIONS The use of the Internet and social networks brings many benefits for both the diabetic patient and the health personnel, offering advantages for both.


Author(s):  
Sandip Tiwari

This chapter brings together the physical underpinnings of field-effect transistors operating in their nanoscale limits. It tackles the change in dominant behavior from scattering-limited long-channel transport to mesoscopic and few scattering events limits in quantized channels. It looks at electrostatics and a transistor’s controllability as dimensions are shrunk—the interplay of geometry and control—and then brings out the operational characteristics in “off”-state, e.g., the detailed nature of insulator’s implications or threshold voltage’s statistical variations grounded in short-range and long-range effects, and “on”-state, where quantization, quantized channels, ballistic transport and limited scattering are important. It also explores the physical behavior for zero bandgap and monoatomic layer materials by focusing on real-space and reciprocal-space funneling as one of the important dimensional change consequences through a discussion of parasitic resistances.


Polymers ◽  
2021 ◽  
Vol 13 (4) ◽  
pp. 594
Author(s):  
Pavel Brdlík ◽  
Martin Borůvka ◽  
Luboš Běhálek ◽  
Petr Lenfeld

The influence of additives such as natural-based plasticiser acetyl tributyl citrate (ATBC), CaCO3 and lignin-coated cellulose nanocrystals (L-CNC) on the biodegradation of polylactic acid (PLA) biocomposites was studied by monitoring microbial metabolic activity through respirometry. Ternary biocomposites and control samples were processed by a twin-screw extruder equipped with a flat film die. Commonly available compost was used for the determination of the ultimate aerobic biodegradability of PLA biocomposites under controlled composting conditions (ISO 14855-1). In addition, the hydro-degradability of prepared films in a freshwater biotope was analysed. To determine the efficiency of hydro-degradation, qualitative analyses (SEM, DSC, TGA and FTIR) were conducted. The results showed obvious differences in the degradation rate of PLA biocomposites. The application of ATBC at 10 wt.% loading increased the biodegradation rate of PLA. The addition of 10 wt.% of CaCO3 into the plasticised PLA matrix ensured an even higher degradation rate at aerobic thermophilic composting conditions. In such samples (PLA/ATBC/CaCO3), 94% biodegradation in 60 days was observed. In contrast, neat PLA exposed to the same conditions achieved only 16% biodegradation. Slightly inhibited microorganism activity was also observed for ternary PLA biocomposites containing L-CNC (1 wt.% loading). The results of qualitative analyses of degradation in a freshwater biotope confirmed increased biodegradation potential of ternary biocomposites containing both CaCO3 and ATBC. Significant differences in the chemical and structural compositions of PLA biocomposites were found in the evaluated period of three months.


Author(s):  
Z. C. Ong ◽  
C. C. Lee

A novel modal analysis technique called impact-synchronous modal analysis (ISMA) was introduced in previous research. With the utilization of impact-synchronous time averaging (ISTA), this modal analysis can be performed in presence of ambient forces whereas the conventional analysis method requires machines to be totally shut down. However, lack of information of phase angles with respect to impact in ISMA has caused it to be labor-intensive and time-consuming. An automated impact device (AID) is introduced in this study in the effort to replace the manually operated impact hammer and prepare it to be used in the current practice of ISMA on the purpose of enhancing its effectiveness and practicability. Impact profile and isolation effect are noted to be the contributing parameters in this study. This paper devoted on calibrating and controlling of the AID which gives the desired impact profiles as compared to the manual impact hammer. The AID is found effective in the determination of dynamic characteristics when the device is isolated from the boundary condition of the test structure.


Sign in / Sign up

Export Citation Format

Share Document