scholarly journals Development of multistage plowing method that involves subsurface loosening

2021 ◽  
Vol 37 ◽  
pp. 00044
Author(s):  
Maxim P. Erzamaev ◽  
Dmitry S. Sazonov ◽  
Leila S. Kurmanova ◽  
Evgeny S. Nesterov ◽  
Alexey E. Shlykov
Keyword(s):  
Experimental Studies ◽  
New Method ◽  
Energy Costs ◽  
Theoretical Relationship ◽  
Bottom Soil ◽  
Soil Cultivation ◽  
Working Bodies

The paper proposes a new method for multistage plowing that implies loosening bottom soil and subsoil horizon simultaneously, followed by overturning the bottom soil without cutting, which improves the quality of soil cultivation, softens a plow sole and reduces energy costs. Experimental studies confirmed the theoretical relationship for determining the plowing resistance, both of certain working bodies of a section, and of a whole plow. The method proposed for multistage plowing that implies loosening the subsoil provides a decrease in plowing resistance by 8.3-9.8% compared to the existing double-depth plowing followed by loosening the subsoil.

scholarly journals Optimization of the design and technological parameters of an active ripper of a combined working body

2021 ◽  
Vol 37 ◽  
pp. 00068
Author(s):  
S. A. Ivanaisky ◽  
M. A. Kanaev ◽  
Y. A. Kirov ◽  
M. S. Ivanaisky ◽  
S. V. Denisov
Keyword(s):  
Soil Layer ◽  
Winter Period ◽  
Technological Parameters ◽  
High Quality ◽  
Quality Performance ◽  
Soil Cultivation ◽  
Surface Moisture ◽  
Tillage Operation ◽  
Working Bodies

The research objective is to improve the quality of soil loosening using combined working bodies for surface moisture-retaining soil cultivation. The efficiency of accumulation and conservation of precipitation in the autumn-winter period depends on the method of post-harvest soil cultivation. One of them is the autumn surface water-retaining treatment, which makes it possible to increase the efficiency of the processes of accumulation and conservation of moisture due to the deeper loosening of the cultivated soil layer. During loosening and mulching, the top layer of the soil contributes to the accumulation and preservation of moisture not only in the upper but also in deeper soil horizons. However, the used tillage tools do not fully solve the problem of the high-quality performance of surface moisture-retaining soil cultivation. The article presents the results of studies of the degree of influence of geometric and technological parameters of the additional active cultivator on the quality of surface tillage. Based on the results of the research carried out, the technological process of performing the surface tillage operation has been improved and combined working bodies have been developed for its implementation.

scholarly journals Comparative experimental studies of the main electrical parameters of electrical equipment insulation after drying by various methods

2021 ◽  
Vol 2131 (4) ◽  
pp. 042076
Author(s):  
E Dulskiy ◽  
V Kruchek ◽  
P Kolpahchyan
Keyword(s):  
Experimental Studies ◽  
Electrical Equipment ◽  
Convective Drying ◽  
Energy Costs ◽  
Electrical Parameters ◽  
Ir Radiation ◽  
Theoretical Terms ◽  
Industrial Environment ◽  
Quality And Reliability

Abstract The article is devoted to the assessment of the comparative experimental studies’ results of various technologies for drying impregnated insulation of power electrical equipment in the process of manufacturing and repair: standard technology, which provides for convective drying using high-power electric ovens, and the proposed technology and methods for accelerated drying in hardware complexes using infrared (IR) radiation. In particular, the article presents the results of the polymer insulation surface microstructure analysis after drying by the indicated methods. The research was carried out in an industrial environment, using specialized certified equipment. In theoretical terms, the article presents the calculations on the rationale for the use of IR radiation during drying of a multilayer insulating structure of various compositions. The studies carried out confirm the hypothesis about the formation of microcavities on the surface and in the thickness of the polymer insulation when using convection during drying, which reduce the quality and reliability of the electrical equipment insulation as a whole. At the same time, the proposed technology and technique for accelerated drying of electrical equipment insulation using IR-radiation gives an opportunity to improve the quality of the resulting polymer insulation, increasing its reliability. In addition, this technology can significantly increase the productivity of insulation repair and reduce energy costs.

scholarly journals Дослідження безприводного ротаційного органу адаптера до сівалки просапних культур

2018 ◽  
pp. 153-160
Author(s):  
Є. Я. Прасолов ◽  
С. А. Бєловол ◽  
Б. С. Черненко ◽  
А. В. Ужищенко ◽  
А. В. Шеметюк
Keyword(s):  
Fractional Composition ◽  
Technological Scheme ◽  
Field Profile ◽  
Transverse Beam ◽  
Soil Cultivation ◽  
Operating Modes ◽  
Soil Hardness ◽  
Working Bodies ◽  
Rotary Device

Представлено результати розробки безприводного ротаційного органу адаптера до сівалки просапних культур. Проведено аналіз робочих органів ґрунтообробних машин; обґрунтовано ґрунтообробний адаптер; визначено кути афронтальності й нахилу дискового  органу; проведено порівняльну оцінку показників твердості ґрунту; визначено раціональні параметри і режими роботи робочого органу; визначено фракційний склад ґрунту та розпушення робочим органом; проведено  дослідження з визначення раціонального кута φ робочого органу; встановлено поздовжній профіль насіннєвого ложа; виконано співвідношення ширини і глибини обробленої смуги; визначено коефіцієнти к1 і к2  у формулі тягового опору безприводного ротаційного органу. Для  підвищення якості передпосівного обробітку ґрунту запропоновано адаптер із безприводним ротаційним органом до сівалок, який складається з поперечної балки рами, на якій розташовані секції безприводного ротаційного органу. Для копіювання профілю поля кожна секція забезпечена паралелограмною підвіскою і підпружиненою штангою. Крім поперечної балки  рама адаптера складається з двох автозчіпок, які слугують для агрегатування з трактором, а автозчеплення з сівалкою, пов'язаних між собою поздовжніми балками.  Проведено випробування результатів науково-дослідної роботи, яким підтверджено ефективність та доцільність для використання у господарстві ПП Агрофірма «Анастасія» Глобинського району Полтавської області. The article presents the results of the development of a non-rotating rotational organ of the soil-working adapter to a seed drill of cultivating crops. The analysis of working bodies of soil-working machines was carried out; the constructive-technological scheme of the soil-working adapter is substantiated; defined angles of inclination and inclination of the disc body; comparative estimation of soil hardness indexes; defined rational parameters and operating modes of the working body; determined fractional composition of soil and loosening by the working body;  researches have been conducted to determine the rational angle φ of the working organ; the longitudinal profile of the seed bed is established; the ratio of the width and depth of the treated strip is executed; the coefficients k1 and k2 in the formula of the traction resistance of the non-driven rotational body are determined. To improve the quality of pre-sowing soil cultivation, an adapter with a rotary rotary device to the seeders is proposed. It consists of a transverse beam of a frame, on which, with the help of brackets, there are sections of a non-rotating rotary body. To improve the quality of pre-sowing soil cultivation, an adapter with a rotary device to the seeders is offered. It consists of a transverse beam of a frame, on which, with the help of brackets, there are sections of a non-rotating rotary body. To copy the field profile, each section is provided with a parallelogram suspension and a spring-loaded rod. In addition to the transverse beam of the adapter frame consists of two auto-scraps, which serve for aggregating with the tractor, and auto-coupling with a drill, connected by a longitudinal beam. The testing of research results has been carried out, which confirms the efficiency and expediency for use in the farm of the PP agricultural firm «Anastasia» in Globyno district, Poltava region.

Modernization of the upper head of the bucket elevator

2015 ◽  
Vol 5 (1) ◽  
pp. 207-214
Author(s):  
Шатохин ◽  
Ivan Shatokhin ◽  
Дерканосова ◽  
Natalya Derkanosova ◽  
Оробинский ◽  
...  
Keyword(s):  
Experimental Studies ◽  
Mechanical Action ◽  
Belt Conveyor ◽  
Food Grains ◽  
Processed Material ◽  
Bucket Elevator ◽  
Negative Effect ◽  
Working Bodies ◽  
The Individual

Studies of many authors show that injury of seeds has a negative effect, both on seeds and food grains. Damage in food grains reduces its trade, technological and baking performances. The main reasons causing injury to the seed, is mechanical action of the working bodies of machines and implements for post-harvest treatment of seeds. In this injury will be greater, the greater the speed of the seeds moving. Analysis of the distribution of injury between the individual elements of the line revealed that about 50 % of all injury of grain (28.3 %) falls on transporting machines. From above it follows that a reduction of injury to the seeds is an important problem, which is caused by the need to solve large yield losses, worsening of seeds storage and decrease in quality of the seed, and it is necessary firstly to investigate the possibility of improving the quality of conveying machines, and in particular , bucket elevators. This is because grain cleaning machines provide improved cleaning quality of grain, and conveying ones- conversely increase its. Taking into account that in cleaning lines usually there are several elevators, the reduction of seed damage by them will substantially improve the quality of the processed material. For this purpose, it is necessary to improve bucket elevators, providing softer mode. In this regard, the work was done to improve the design of the upper head of the elevator to reduce feedback eruption. On this construction patent for utility model number ZA 140052 was received. On the basis of this patent bucket elevator was refitted, in which head was an additional horizontal belt conveyor. Experimental studies have been conducted to identify the degree of feedback. It was found that an additional belt conveyor helps to reduce feedback rash when its speed is higher than the speed of bucket belt.

scholarly journals Mini crusher-shredder for farms

2021 ◽  
Vol 264 ◽  
pp. 04038
Author(s):  
Komil Astanakulov ◽  
Fakhriddin Karshiev ◽  
Shokir Gapparov ◽  
Dilshod Khudaynazarov ◽  
Shavkat Azizov
Keyword(s):  
Rotation Angle ◽  
High Reliability ◽  
Experimental Studies ◽  
Mathematical Planning ◽  
Quality Performance ◽  
Working Bodies ◽  
Planning Of Experiments ◽  
Good Visibility ◽  
Rotary Type

The purpose of the study is to substantiate the parameters of a mini crusher-shredder for processing coarse feed stalks in farms. The feasibility of using a mini crusher-shredder for processing coarse feed in the conditions of farms and farms with a small number of animals, which has a rotary-type shredder that combines the operations of grinding and crushing, is justified. The research uses the laws and rules of mathematical statistics, mathematical planning of experiments, and the methods given in existing regulatory documents. Experimental studies were carried out to study the influence of the rotor parameters of the mini crusher-shredder on its quality performance. A compact crusher-shredder has been developed, which has good visibility of the working bodies, high reliability, and quality of work due to zootechnical requirements. Experimental studies have established that when using a hammer of a flat-turned shape with a lower sharpening and a rotation angle of 60 or more, high-quality grinding of the stems is provided.

scholarly journals Influence of working bodies of technical means on injury and quality of seed of grain crops

2020 ◽  
Vol 11 (3) ◽  
pp. 49-54
Author(s):  
D. A. Derevianko ◽  
◽  
V. M. Polishchuk ◽  
O. D. Derevianko ◽  
◽  
...  
Keyword(s):  
Technological Process ◽  
Theoretical Calculations ◽  
Structural Parameters ◽  
Experimental Studies ◽  
Grain Crops ◽  
Transportation Process ◽  
Working Bodies ◽  
The Relationship ◽  
Harmful Effects

Theoretical calculations and experimental studies show that during the technological process of transporting seeds by technical means, in particular ladle conveyors, macro- and especially microtrauma of grains occurs, which affects a decrease in quality indicators. Analysis of the studies shows that the structural parameters of the working bodies, the biological and physico-mechanical properties of the kernels, as well as the material for the manufacture or coating of the working elements, affect the trauma and quality of the seeds. Experimental data showed that microtrauma of winter wheat grains before transportation was in the range of 22,9- 23,5%, and after completion of the transportation process was 45,3-46,4%, that is, doubled. Further studies to improve the quality of seeds of grain crops, reduce the harmful effects of microorganisms on caryopsis and reduce macro- and microtrauma should be carried out in the relationship and the complex of biological and physico-mechanical features of the entire technological process.

scholarly journals Parameters of the angle-lift of the front plow for smooth, rowless plowing

2021 ◽  
Vol 264 ◽  
pp. 04042
Author(s):  
Nikolay Aldoshin ◽  
Sherzod Kurbanov ◽  
Akmal Abdullaev ◽  
Alham Khujayev ◽  
Dilsabo Choriyeva
Keyword(s):  
Carbon Monoxide ◽  
Experimental Studies ◽  
Energy Costs ◽  
Mathematical Planning ◽  
Quality Performance ◽  
Side Face ◽  
Required Quality ◽  
Theoretical Mechanics ◽  
Planning Of Experiments

To improve the quality and energy indicators on the front plow in front of the housings, the angle axes are installed in the form of a triangular wedge. The purpose of the study is to substantiate the parameters of the angle-lift of the front plow, which provides high-quality performance of the technological process according to agrotechnical requirements with the lowest energy costs for smooth, rowless plowing. The research uses the laws and rules of theoretical mechanics, mathematical statistics, mathematical planning of experiments, and methods of strain measurement, as well as the methods given in existing regulatory documents. Based on the study of the process of interaction of the carbon monoxide with the soil, analytical dependences are obtained that allow us to determine the parameters of the carbon monoxide. According to the results of theoretical and experimental studies, it was found that the required quality of tillage with a front plow following the established agrotechnical requirements with minimal energy consumption is provided at the height of 22 cm, a length of 27 cm, a wing angle of 32° and an angle of inclination of the side face of 36°.

scholarly journals Justification of the rotary working body for soil cultivation when fertilizing in the garden

2021 ◽  
Vol 845 (1) ◽  
pp. 012129
Author(s):  
A V Alyokhin ◽  
V I Gorshenin ◽  
M S Koldin ◽  
I A Drobyshev
Keyword(s):  
Uniform Distribution ◽  
Technological Process ◽  
Soil Structure ◽  
Experimental Studies ◽  
Agricultural Technology ◽  
Soil Cultivation ◽  
Theoretical Substantiation ◽  
Working Surface ◽  
Made In

Abstract The paper considers the effect of milling the soil for fertilizing with the ability to obtain a soil structure, in which there will be a uniform distribution of fertilizers for their more active assimilation. The device of the rotary working body for the implementation of this technological process is presented. The theoretical substantiation of the curvilinear working surface of the knife is carried out to obtain the optimal structure of the soil. The dependence of the shape of the knife working surface on the parameter of the parabola p is plotted. The results of experimental studies are given. It was concluded that the quality of soil cultivation required by agricultural technology by this working body with a knife working surface made in a parabola was obtained with a parameter p = 2.5.

scholarly journals The new antierosion and water saving technologies and tools for soil cultivation under the conditions of Uzbekistan

2017 ◽  
Vol 4 ◽  
pp. 16-20
Author(s):  
Mamatov F.M. ◽  
Mirzaev B.S.
Keyword(s):  
Performance Indicators ◽  
Water Conservation ◽  
Field Tests ◽  
Water Erosion ◽  
Energy Costs ◽  
Increase Labor Productivity ◽  
Labor Costs ◽  
Soil Cultivation ◽  
Sloping Lands

The purpose of the research is developing technology and technical tools for soil cultivation, which contributes water conservation and prevention of water erosion on sloping lands. The technology of soil cultivation on sloping lands exposed to water erosion, basic schemes and designs of a two-tier ripper and a plow for row-stepping plowing have been developed. The results of experimental and field tests of developed tools showed that they are significantly superior than the serial machines in terms of their main performance indicators, they help to preserve soil from water erosion, allow to improve the quality of soil cultivation, reduce energy costs, and increase the productivity of aggregates. Using two-level soil-ripper with inclined stands and a plow for stepped-stump plowing, allowed to reduce labor costs by 18.75 % and 14.4 %, fuel consumption by 19.12 % and 14.25 %, and increase labor productivity by 18.96 % and 14.28 %.

scholarly journals ANALYSIS OF WORKING BODIES OF EQUIPMENT EXTINGUISHING FOREST FIRES

2020 ◽  
Vol 8 (1) ◽  
pp. 119-122
Author(s):  
Anton Pozdnyakov ◽  
Ivan Bartenev
Keyword(s):  
Comparative Analysis ◽  
Forest Fire ◽  
Forest Fires ◽  
Experimental Studies ◽  
Large Mass ◽  
Soil Layers ◽  
Loose Soil ◽  
Working Bodies ◽  
Milling Tools

Currently, the machines are energy-intensive and inefficient, since the tools are mounted on tractors with a creeper reducer, and the cutters have to work in the conditions of the sodden upper soil layers, which significantly reduces the quality and productivity of the process. This served as an impetus for the creation of new technical tools that would combine the best qualities of plows and milling tools, expand the range of possible applications, but at the same time were devoid of their shortcomings. So there appeared tools with combined working bodies, for example, a strip thrower, developed on the basis of the G.F. Morozova. However, these developments also do not completely solve the problems of the efficiency and quality of preventive and forest fire operations, since the working bodies of milling, although working on a loose soil-soil shaft, are still not protected from roots and stumps, they have a large mass and dimensions due to a combination of two types working bodies in one design. A comparative analysis of technical means and experimental studies of a prototype forest fire soil-throwing machine with a combined working body was carried out.

Sign in / Sign up

Export Citation Format

Share Document