scholarly journals Control of inherited accreted lithospheric heterogeneity on the architecture and the low long-lived subsidence rate of intracratonic basins

Author(s):  
Paul Perron ◽  
Laetitia Le Pourhiet ◽  
Michel Guiraud ◽  
Emmanuelle Vennin ◽  
Isabelle Moretti ◽  
...  

Intracratonic basins tend to subside much longer than the timescale predicted by thermal relaxation of the lithosphere. Many hypotheses have been suggested to explain their longevity, yet few have been tested using quantitative thermo-mechanical numerical models, which capture the dynamic of the lithosphere. Lithospheric scale geodynamic modelling preserving the tectono-stratigraphic architecture of these basins is challenging because they display only few kilometres of subsidence over 1000 of km during time periods exceeding 250 Myr. Here we present simulations that are designed to examine the relative role of thermal anomaly, tectonics and heterogeneity of the lithosphere on the dynamics of intracratonic basins. Our results demonstrate that initial heterogeneity of accretionary continental lithosphere explains long-term subsidence and the arches-basins architecture of Saharan type intracratonic basins at first order. The simulations show that initially warm and heterogeneous lithospheres inherited from accretion are strong enough to resist local isostatic re-equilibration for very long period of time. Indeed, the lateral density variations store potential gravitational energy that is then slowly dissipated by differential erosion and slow vertical movements. For relatively well-accepted coefficient of erosion of 10-6 m2/s, the subsidence last longer than 250 Myr. Extensional tectonic forcing and thermal anomalies both results in an effective strength drop of the lithosphere, which allows a temporarily acceleration of local isostatic re-equilibration. Periodic changes in far field tectonic forcing from extension to compression complicate the tectono-stratigraphic architecture (intra-basin arches, sub-basins) introducing stratigraphic unconformities between different neighbouring basins such as the ones observed in North Africa.

2010 ◽  
Vol 181 (4) ◽  
pp. 363-376 ◽  
Author(s):  
Cynthia Garibaldi ◽  
Laurent Guillou-Frottier ◽  
Jean-Marc Lardeaux ◽  
Damien Bonté ◽  
Simon Lopez ◽  
...  

Abstract Deep temperature estimates previously made in France show three main positive thermal anomalies, one of them being centred on the Provence basin (southeast France) between Marseille and Montpellier. This study presents newly corrected temperature data and improved temperature maps in order to (i) validate or to invalidate the thermal anomalies previously identified and (ii) relate deep temperatures with major geological structures of the area. Although the thermal gradient varies from place to place, it averages 31.3°C./km in the Provence basin (from 30.6 to 32.5°C/km in average for France according to the chosen database), but some locations show gradients reaching 36°C/km. To characterize thermal anomalous areas, a three-dimensional model of the temperatures was built between the surface and 6 km depth, allowing us to elaborate thermal maps and cross-sections. The identified thermal anomalies are different from those obtained by former works. New other "hot" anomalous areas (Montpellier, Lodève and Drôme areas) and cold anomalous areas (Aix-en-Provence and Cévennes areas) have been highlighted. At depth, thermal cross-sections show 50 km-scale anomalies, which are parallel with the major faults (Cévennes, Nimes, Salon-Cavaillon and Moyenne-Durance faults) whereas more elongated (roughly 100 km) anomalies are associated with perpendicular cross-sections. On these cross-sections each major fault is associated with a thermal anomaly. In addition, a cold area may overlie a warm one, and vice versa. Among different possible explanations, these thermal signatures could correspond to convective fluid circulation within the faults. Simple numerical models of hydrothermal convection within fault zones appear to reproduce similar amplitudes and vertical variations of thermal anomalies as those observed in the Provence basin.


2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Hugo Duwiquet ◽  
Laurent Arbaret ◽  
Laurent Guillou-Frottier ◽  
Michael J. Heap ◽  
Mathieu Bellanger

Abstract The present study aims to understand the potential of a new and novel type of geothermal play system for high temperature and electricity production: crustal fault zones (CFZ). According to geological and geophysical data, the Pontgibaud fault zone (French Massif Central) is suspected to host an active hydrothermal system at a depth of a few kilometers. The deep geometry of the fault zone and the permeability distribution are the main unknown parameters that are required to assess the geothermal potential of the Pontgibaud site. Structural and thin-section observations, laboratory permeability and connected porosity measurements and X-ray micro-tomography observations suggest that the hydrothermal system behaves like a double matrix-fracture permeability reservoir. Numerical modeling in which we varied the fault dip and the ratio between the fault zone permeability and host rock, R, was performed. Results indicate that three main convective regimes can be identified (weak convection, single cellular-type convection and bicellular convection). For a sufficiently high fault zone permeability (> 1 × 10−15 m2), buoyancy-driven flow creates a positive thermal anomaly of several tens of °C at a depth of 2–5 km. For a vertical fault zone, the thermal anomaly is larger for higher R values. Numerical models, then applied to the geologically constrained Pontgibaud fault zone, show that a temperature of 150 °C at a depth of 2500 m can be obtained for a fault zone permeability of 1.6 × 10−14 m2. Based on a multi-disciplinary approach, this work establishes a potential predictive tool for future high-temperature geothermal operations within basement rocks hosting large-scale fault systems.


2020 ◽  
Author(s):  
Yves Godderis ◽  
Pierre Maffre ◽  
Yannick Donnadieu

<p>The weathering of continental silicate rocks is a main sink of CO<sub>2</sub> at the geological timescale. As it is dependent on the climatic conditions (more weathering in a warmer world), the silicate weathering acts as a negative feedback on the carbon cycle, limiting the amplitude of past climatic changes.</p><p>Many contributions have shown that silicate weathering efficiency (the « weatherability ») is strongly correlated to the physical erosion. Because of this tight link, many works have focused on the role of mountain ranges in the climatic evolution, because those areas are characterized by intense physical denudation, thus potentially boosting chemical weathering. Simply speaking, periods of active mountain building are suspected to generate cold conditions.</p><p>Conversely, little attention has been paid to the role of large and flat continental areas. Due to the lack of physical erosion in those flat areas, the weathering processes will generate thick regoliths, progressively shielding the bedrock and ultimately decreasing the weatherability. Periods of limited mountain building activity might generate very high CO<sub>2</sub> level and warm climatic episodes.</p><p>However, this simple scheme, defining two extreme poles for the surficial Earth system (one mountainous and cold, the other flat and warm) raises several questions:</p><ul><li>the two modes (mountainous and flat) generally co-exist. Their relative role in the control of the climate is probably dependent on the continental configuration, and on the location of tectonically active and non-active areas in latitude and longitude.</li> <li>the dynamics of the thick regolith is not well constrained. How long does it take to generate thick regoliths? What is the response time of thick regoliths to a perturbation?</li> <li>what about the horizontal transfer of sediments? Recent works have shown that sediments are exported from mountain ranges and weathered in plains at the feet of the mountains. How can we incorporate this into numerical models? </li> </ul><p>We will explore the role of the regolith thickness with the spatially-resolved GEOCLIM model. We will focus on the consequences of the colonization of the continents by vascular land plants over the course of the Devonian. This event is suspected to have impacted the weatherability of all the continental surfaces in the same direction (increase in weatherability). We will show that the way atmospheric CO<sub>2</sub> is responding is depending on the initial state of the weathering system, prior to the colonization event. We will also explore the response time of the regolith cover to the global environmental change. We show that short glacial events can be generated in the direct vicinity of the colonization event, if the response time of the regolith layer is long and the colonization is fast. This cold overshoot disappears when the colonization time is assumed to be long (10 Myr), and the continental configuration becomes a critical factor impacting the CO<sub>2</sub> evolution.</p>


2013 ◽  
Vol 26 (22) ◽  
pp. 9115-9136 ◽  
Author(s):  
David Medvigy ◽  
Robert L. Walko ◽  
Martin J. Otte ◽  
Roni Avissar

Abstract Numerical models have long predicted that the deforestation of the Amazon would lead to large regional changes in precipitation and temperature, but the extratropical effects of deforestation have been a matter of controversy. This paper investigates the simulated impacts of deforestation on the northwest United States December–February climate. Integrations are carried out using the Ocean–Land–Atmosphere Model (OLAM), here run as a variable-resolution atmospheric GCM, configured with three alternative horizontal grid meshes: 1) 25-km characteristic length scale (CLS) over the United States, 50-km CLS over the Andes and Amazon, and 200-km CLS in the far-field; 2) 50-km CLS over the United States, 50-km CLS over the Andes and Amazon, and 200-km CLS in the far-field; and 3) 200-km CLS globally. In the high-resolution simulations, deforestation causes a redistribution of precipitation within the Amazon, accompanied by vorticity and thermal anomalies. These anomalies set up Rossby waves that propagate into the extratropics and impact western North America. Ultimately, Amazon deforestation results in 10%–20% precipitation reductions for the coastal northwest United States and the Sierra Nevada. Snowpack in the Sierra Nevada experiences declines of up to 50%. However, in the coarse-resolution simulations, this mechanism is not resolved and precipitation is not reduced in the northwest United States. These results highlight the need for adequate model resolution in modeling the impacts of Amazon deforestation. It is concluded that the deforestation of the Amazon can act as a driver of regional climate change in the extratropics, including areas of the western United States that are agriculturally important.


2020 ◽  
Author(s):  
Remi J.G. Charton

Our understanding of the Earth’s interior is limited by the access we have of its deep layers, while the knowledge we have of Earth’s evolution is restricted to harvested information from the present state of our planet. We therefore use proxies, physical and numerical models, and observations made on and from the surface of the Earth. The landscape results from a combination of processes operating at the surface and in the subsurface. Thus, if one knows how to read the landscape, one may unfold its geological evolution.In the past decade, numerous studies have documented km-scale upward and downward vertical movements in the continental rifted margins of the Atlantic Ocean and in their hinterlands. These movements, described as exhumation (upward) and subsidence (downward), have been labelled as “unpredicted” and/or “unexpected”. ‘Unpredicted’ because conceptual, physical, and numerical models that we dispose of for the evolution of continental margins do not generally account for these relatively recent observations. ‘Unexpected’ because the km-scale vertical movements occurred when our record of the geological history is insufficient to support them. As yet, the mechanisms responsible for the km-scale vertical movements remain enigmatic.One of the common techniques used by geoscientists to investigate the past kinematics of the continental crust is to couple ‘low-temperature thermochronology’ and ‘time-temperature modelling’. In Morocco alone, over twenty studies were conducted following this approach. The reason behind this abundance of studies and the related enthusiasm of researchers towards Moroccan geology is due to its puzzling landscapes and complex history. In this Thesis, we investigate unconstrained aspects of the km-scale vertical movements that occurred in Morocco and its surroundings (Canary Islands, Algeria, Mali, and Mauritania). The transition area between generally subsiding domains and mostly exhuming domains, yet poorly understood, is discussed via the evolution of a profile, running across the rifted continental margin (chapter 2). Low-temperature thermochronology data from the central Morocco coastal area document a km-scale exhumation between the Permian and the Early/Middle Jurassic. The related erosion fed sediments to the subsiding Mesozoic basin to the northwest. Basement rocks along the transect were subsequently buried between the Late Jurassic and the Early Cretaceous. From late Early/Late Cretaceous onwards, rocks present along the transect were exhumed to their present-day position.The post-Variscan thermal and geological history of the Anti-Atlas belt in central Morocco is constrained with a transect constructed along strike of the belt (chapter 3). The initial episode occurred in the Late Triassic and led to a km-scale exhumation of crustal rocks by the end of the Middle Jurassic. The following phase was characterised by basement subsidence and occurred during the Late Jurassic and most of the Early Cretaceous. The basement rocks were then slowly brought to the surface after experiencing a km-scale exhumation throughout the Late Cretaceous and the Cenozoic. The exhumation episodes extended into the interior of the African tectonic plate, perhaps beyond the sampled belt itself. Exhumation rates and fluxes of material eroded from the hinterlands of the Moroccan rifted margin were quantified from the Permian (chapter 4). The high denudation rates, obtained in central Morocco during the Early to Middle Jurassic and in northern Morocco during the Neogene, are comparable to values typical of rift flank, domal, or structural uplifts. These are obtained in central Morocco during the Early to Middle Jurassic and in northern Morocco during the Neogene. Exhumation rates for other periods in northern to southern Morocco average around ‘normal’ denudation values. Periods of high production of sediments in the investigated source areas are the Permian, the Jurassic, the Early Cretaceous, and the NeogeneThe Phanerozoic evolution of source-to-sink systems in Morocco and surroundings is illustrated in several maps (chapter 5). Substantial shifts in the source areas were evidenced between the central and northern Moroccan domains during the Middle-Late Jurassic and between the Meseta and the Anti-Atlas during the Early-Late Cretaceous. Finally, the mechanisms responsible for the onset and subsistence of the unpredicted km-scale vertical movements are discussed (chapter 6). We propose that a combination of the large-scale crustal folding, mantle-driven dynamic topography, and thermal subsidence, superimposed to changes in climates, sea level and erodibility of the exposed rocks, were crucial to the timing, amplitude, and style of the observed vertical movements.The km-scale vertical movements will continue to be studied for years to come. Expectantly, this Thesis will deliver sufficiently robust grounds for further elaborated and integrated studies in Morocco and beyond.


2020 ◽  
Vol 287 (1933) ◽  
pp. 20201379 ◽  
Author(s):  
C. N. Klepac ◽  
D. J. Barshis

Coral bleaching events are increasing in frequency and severity, resulting in widespread losses in coral cover. However, branching corals native to highly variable (HV) thermal environments can have higher bleaching resistance than corals from more moderate habitats. Here, we investigated the response of two massive corals, Porites lobata and Goniastrea retiformis , from a moderately variable (MV) and a low variability (LV) pool transplanted into a HV pool on Ofu Island in American Samoa. Paired transplant and native ramets were exposed to an acute thermal stress after 6 and 12 months of exposure to the HV pool to evaluate changes in thermal tolerance limits. For both species, photosynthetic efficiency and chlorophyll loss following acute heat stress did not differ between ramets transplanted into the HV pool and respective native pool. Moreover, HV native P. lobata exhibited the greatest bleaching susceptibility compared to MV and LV natives and there was no effect of acute heat stress on MV P. lobata . There was also a thermal anomaly during the study, where Ofu's backreef thermal regime surpassed historical records—2015 had 8 degree heating weeks (DHW) and 2016 had up to 5 DHW (in comparison to less than or equal to 3 over the last 10 years)—which may have exceeded the upper thermal limits of HV native P. lobata . These results strongly contrast with other research on coral tolerance in variable environments, potentially underscoring species-specific mechanisms and regional thermal anomalies that may be equally important in shaping coral responses to extreme temperatures.


2019 ◽  
Vol 11 (5) ◽  
pp. 553 ◽  
Author(s):  
Fabio Sansivero ◽  
Giuseppe Vilardo

In this technical paper, the state-of-art of automated procedures to process thermal infrared (TIR) scenes acquired by a permanent ground-based surveillance system, is discussed. TIR scenes regard diffuse degassing areas at Campi Flegrei and Vesuvio in the Neapolitan volcanic district (Italy). The processing system was developed in-house by using the flexible and fast processing Matlab© environment. The multi-step procedure, starting from raw infrared (IR) frames, generates a final product consisting mainly of de-seasoned temperatures and heat fluxes time-series as well as maps of yearly rates of temperature change of the IR frames. Accurate descriptions of all operational phases and of the procedures of analysis are illustrated; a Matlab© code (Natick, Massachusetts, U.S.A.) is provided as supplementary material. This product is ordinarily addressed to study volcanic dynamics and improve the forecasting of the volcanic activity. Nevertheless, it can be a useful tool to investigate the surface temperature field of any areas subjected to thermal anomalies, both of natural and anthropic origin.


Geophysics ◽  
1985 ◽  
Vol 50 (11) ◽  
pp. 1732-1745 ◽  
Author(s):  
Howard P. Ross ◽  
Joseph N. Moore

The Cove Fort‐Sulphurdale KGRA is part of one of the largest thermal anomalies in the western United States. Since 1975 an extensive data base has been developed which includes the results of detailed and regional geologic, gravity, magnetic, seismic, and resistivity investigations. Geologic studies have delineated the major tectonic elements of the thermal system and have led to the recognition of large‐scale gravitational glide blocks that act as a leaky cap to portions of the geothermal system. Gravity and magnetic data have delineated major throughgoing structures beneath alluvium and basalt cover, and have indicated the importance of the Cove Fort‐Beaver graben in localizing the geothermal reservoir. The presence of these structures and a high level of microearthquake activity suggest other target areas within the larger thermal anomaly. Electrical resistivity surveys and thermal gradient holes both contribute to the delineation of the known reservoir. Four deep exploration wells which test the geothermal system were drilled between 1975 and 1979. One well, CFSU 42–7, recorded temperatures of 178°C. The high cost of drilling, high corrosion rates, low reservoir pressures, and the apparent limited extent of the high‐temperature reservoir led to a premature conclusion in 1980 that the field was not economic for large‐scale electric power production. More recent drilling in the vicinity of CFSU 42–7 resulted in the discovery of high‐temperature (200°C?) geothermal fluids at a depth of approximately 350 m. A well‐head generator was installed and power production is expected in 1985. Additional development of the geothermal reservoir is anticipated in the 1985 to 1987 time frame.


Author(s):  
Rui Wang ◽  
Roberto F. Weinberg ◽  
Di-Cheng Zhu ◽  
Zeng-Qian Hou ◽  
Zhi-Ming Yang

The Yadong-Gulu Rift, cutting across the Gangdese belt and Himalayan terranes, is currently associated with a thermal anomaly in the mantle and crustal melting at 15−20 km depth. The rift follows the trace of a tear in the underthrusted Indian continental lithospheric slab recognized by high resolution geophysical methods. The Miocene evolution of a 400-km-wide band following the trace of the tear and the rift, records differences interpreted as indicative of a higher heat flow than its surroundings. In the Gangdese belt, this band is characterized by high-Sr/Y granitic magmatism that lasted 5 m.y. longer than elsewhere and by the highest values of εHf(i) and association with the largest porphyry Cu-Mo deposits in the Gangdese belt. Anomalously young magmatic rocks continue south along the rift in the Tethyan and Higher Himalayas. Here, a 300-km-wide belt includes some of the youngest Miocene Himalayan leucogranites; the only occurrence of mantle-derived mafic enclaves in a leucogranite; young mantle-derived lamprophyre dikes; and the youngest and hottest migmatites in the Higher Himalayas. These migmatites record a history of rapid exhumation contemporaneous with the exhumation of Miocene mafic eclogite blocks, which are unique to this region and which were both heated to >800 °C at ca. 15−13 Ma, followed by isothermal decompression. We suggest that the prominent tear in the Indian lithosphere, sub-parallel to the rift, is the most likely source for these tectono-thermal anomalies since the Miocene.


Author(s):  
Mebrouk Bellaoui ◽  
Abdelatif Hassini ◽  
Kada Bouchouicha

Thermal anomaly Detection prior to earthquake events has been widely confirmed by researchers over the past decade. In this paper, we use robust satellite technique approach (RST) on a collection of six years of MODIS satellite data, representing land surface temperature (LST) images to predict 21st May 2003 Boumerdès Algeria earthquake. The thermal anomalies results were compared with the ambient temperature variation measured in three meteorological stations of Algerian National Office of Meteorology (ONM) (DELLYS-AFIR, TIZI-OUZOU, and DAR-EL-BEIDA). The results confirm the importance of robust satellite technique as an approach highly effective for monitoring the earthquakes.


Sign in / Sign up

Export Citation Format

Share Document