scholarly journals Application of non-metric digital cameras to control the volume of soil displaced when performing earthworks

2020 ◽  
Vol 164 ◽  
pp. 02025
Author(s):  
Nina Rogova
Keyword(s):  
High Frequency ◽  
Digital Technologies ◽  
High Accuracy ◽  
Construction Site ◽  
Digital Cameras ◽  
Main Indicator ◽  
Field Works ◽  
The Cost ◽  
And Control

Moving soil during earthworks at a construction site requires its accounting and control. For this, expensive geodetic methods are widely used, while accounting and control must be performed with high accuracy and frequency. In practice, the use of terrestrial stereophotogrammetric survey can provide a high frequency and accuracy of the results obtained. The traditional stereophotogrammetric survey at this stage undergoes significant changes with the introduction of digital technologies, which allow it to be used more widely. It is proposed to use non-metric digital cameras when performing terrestrial stereophotogrammetric surveys, which will let to reduce the cost of performing the measurement works, as well as to increase the efficiency of field works. The main indicator of the possibility of using the non-metric digital cameras is their resolution, which allows ensuring the accuracy of definitions and acceptable parameters for their calibration.

Case study: Simulation and control of high frequency noise for commercial vehicle cab considering leak

2019 ◽  
Vol 67 (4) ◽  
pp. 315-329
Author(s):  
Rongjiang Tang ◽  
Zhe Tong ◽  
Weiguang Zheng ◽  
Shenfang Li ◽  
Li Huang
Keyword(s):  
High Frequency ◽  
Commercial Vehicle ◽  
Frequency Noise ◽  
High Frequency Noise ◽  
Simulation And Control ◽  
And Control

scholarly journals Multi-Blockchain-Based IoT Data Processing Techniques to Ensure the Integrity of IoT Data in AIoT Edge Computing Environments

Sensors ◽  
2021 ◽  
Vol 21 (10) ◽  
pp. 3515
Author(s):  
Sung-Ho Sim ◽  
Yoon-Su Jeong
Keyword(s):  
Low Cost ◽  
Third Party ◽  
Monitoring And Control ◽  
Constant Size ◽  
Computing Environments ◽  
Iot Devices ◽  
Cloud Servers ◽  
The Cost ◽  
Processing Techniques ◽  
And Control

As the development of IoT technologies has progressed rapidly recently, most IoT data are focused on monitoring and control to process IoT data, but the cost of collecting and linking various IoT data increases, requiring the ability to proactively integrate and analyze collected IoT data so that cloud servers (data centers) can process smartly. In this paper, we propose a blockchain-based IoT big data integrity verification technique to ensure the safety of the Third Party Auditor (TPA), which has a role in auditing the integrity of AIoT data. The proposed technique aims to minimize IoT information loss by multiple blockchain groupings of information and signature keys from IoT devices. The proposed technique allows IoT information to be effectively guaranteed the integrity of AIoT data by linking hash values designated as arbitrary, constant-size blocks with previous blocks in hierarchical chains. The proposed technique performs synchronization using location information between the central server and IoT devices to manage the cost of the integrity of IoT information at low cost. In order to easily control a large number of locations of IoT devices, we perform cross-distributed and blockchain linkage processing under constant rules to improve the load and throughput generated by IoT devices.

scholarly journals An Improved Time Integration Method Based on Galerkin Weak Form with Controllable Numerical Dissipation

2021 ◽  
Vol 11 (4) ◽  
pp. 1932
Author(s):  
Weixuan Wang ◽  
Qinyan Xing ◽  
Qinghao Yang
Keyword(s):  
High Frequency ◽  
Integration Method ◽  
Time Integration ◽  
Low Frequency ◽  
Weak Form ◽  
High Accuracy ◽  
Numerical Dissipation ◽  
Frequency Range ◽  
Time Integration Method ◽  
Numerical Damping

Based on the newly proposed generalized Galerkin weak form (GGW) method, a two-step time integration method with controllable numerical dissipation is presented. In the first sub-step, the GGW method is used, and in the second sub-step, a new parameter is introduced by using the idea of a trapezoidal integral. According to the numerical analysis, it can be concluded that this method is unconditionally stable and its numerical damping is controllable with the change in introduced parameters. Compared with the GGW method, this two-step scheme avoids the fast numerical dissipation in a low-frequency range. To highlight the performance of the proposed method, some numerical problems are presented and illustrated which show that this method possesses superior accuracy, stability and efficiency compared with conventional trapezoidal rule, the Wilson method, and the Bathe method. High accuracy in a low-frequency range and controllable numerical dissipation in a high-frequency range are both the merits of the method.

In-line filtration reduced phlebitis associated with peripheral venous cannulation: Focus on cost-effectiveness and patients’ perspectives

2019 ◽  
Vol 21 (2) ◽  
pp. 154-160
Author(s):  
Gianluca Villa ◽  
Rosa Giua ◽  
Timothy Amass ◽  
Lorenzo Tofani ◽  
Cosimo Chelazzi ◽  
...  
Keyword(s):  
Cost Effectiveness ◽  
Vascular Access ◽  
Cost Effective ◽  
Causative Factor ◽  
Control Group ◽  
Previous Trial ◽  
Venous Cannulation ◽  
Group A ◽  
The Cost ◽  
And Control

Background: In a previous trial, in-line filtration significantly prevented postoperative phlebitis associated with short peripheral venous cannulation. This study aims to describe the cost-effectiveness of in-line filtration in reducing phlebitis and examine patients’ perception of in-hospital vascular access management with and without in-line filtration. Methods: We analysed costs associated with in-line filtration: these data were prospectively recorded during the previous trial. Furthermore, we performed a follow-up for all the 268 patients enrolled in this trial. Among these, 213 patients responded and completed 6 months after hospital discharge questionnaires evaluating the perception of and satisfaction with the management of their vascular access. Results: In-line filtration group required 95.60€ more than the no-filtration group (a mean of € 0.71/patient). In terms of satisfaction with the perioperative management of their short peripheral venous cannulation, 110 (82%) and 103 (76.9%) patients, respectively, for in-line filtration and control group, completed this survey. Within in-line filtration group, 97.3% of patients were satisfied/strongly satisfied; if compared with previous experiences on short peripheral venous cannulation, 11% of them recognised in-line filtration as a relevant causative factor in determining their satisfaction. Among patients within the control group, 93.2% were satisfied/strongly satisfied, although up to 30% of them had experienced postoperative phlebitis. At the qualitative interview, they recognised no difference than previous experiences on short peripheral venous cannulation, and mentioned postoperative phlebitis as a common event that ‘normally occurs’ during a hospital stay. Conclusion: In-line filtration is cost-effective in preventing postoperative phlebitis, and it seems to contribute to increasing patient satisfaction and reducing short peripheral venous cannulation–related discomfort

Contour Extraction of Cerebrovascular Based on Maximum Optimization Cost

2011 ◽  
Vol 204-210 ◽  
pp. 1415-1418
Author(s):  
De Jiang Zhang ◽  
Na Na Dong ◽  
Xiao Mei Lin
Keyword(s):  
Dynamic Programming ◽  
Blood Vessel ◽  
High Efficiency ◽  
High Accuracy ◽  
Differential Method ◽  
Cost Curve ◽  
Contour Extraction ◽  
Target Image ◽  
The Cost ◽  
Conventional Algorithm

By studying the conventional algorithm of contour extraction, a new method of contour extraction in blood vessel of brain is proposed based on the MOC maximum optimization cost. First of all, the theory computes the gray differential of the image by conventional differential method to build the cost space. Then, by using dynamic programming theory, the maximum optimization cost curve in the space is extracted to serve as the specific cerebrovascular profile. The experiments show that this method ensures high efficiency in extracting cerebrovascular contour and a high accuracy in positioning cerebrovascular contour, and it diminishes the target image ambiguity caused by noise to improve the anti-interference ability of Contour extraction.

Design and Construction of a Small Reverberation Chamber Applied to Absorption and Scattering Acoustic Measurements

2014 ◽  
Vol 1077 ◽  
pp. 197-202
Author(s):  
D. Hernandez ◽  
E.J. Liu ◽  
J.H. Huang ◽  
Y.C. Liu
Keyword(s):  
High Frequency ◽  
Integration Method ◽  
Sound Field ◽  
Acoustic Measurements ◽  
Acoustic Characteristics ◽  
Reverberation Chamber ◽  
Scattering Coefficients ◽  
Reverberation Chambers ◽  
The Cost ◽  
Design And Construction

Reverberation chambers are used to create a diffuse incidence sound field, where multiple types of acoustic measurements can be performed. The chambers tend to have a large volume in order to extent the reverberation time. However, this requirement may be conditioned by the cost and the infrastructure limitations. This paper presents the design and construction of a small-scaled reverberation chamber of 3 m3 for middle-high frequency acoustic measurements. On the design, the acoustic characteristics of chamber are confirmed via finite element computer simulation. As case studies, absorption and scattering coefficients of several materials and diffusors are measured. The reverberation times needed for the measurements were obtained by the impulse response integration method. The small reverberation chamber demonstrated to be a reliable tool for middle and high frequency acoustic measurements.

An Efficient Galerkin BEM to Compute High Acoustic Eigenfrequencies

2009 ◽  
Vol 131 (3) ◽  
Author(s):  
Mario Durán ◽  
Jean-Claude Nédélec ◽  
Sebastián Ossandón
Keyword(s):  
Numerical Method ◽  
Integral Equations ◽  
High Frequency ◽  
High Accuracy ◽  
Integral Representations ◽  
Stability And Convergence ◽  
Symmetric Matrices ◽  
Frequency Interval ◽  
Numerical Treatment ◽  
The Stability

An efficient numerical method, using integral equations, is developed to calculate precisely the acoustic eigenfrequencies and their associated eigenvectors, located in a given high frequency interval. It is currently known that the real symmetric matrices are well adapted to numerical treatment. However, we show that this is not the case when using integral representations to determine with high accuracy the spectrum of elliptic, and other related operators. Functions are evaluated only in the boundary of the domain, so very fine discretizations may be chosen to obtain high eigenfrequencies. We discuss the stability and convergence of the proposed method. Finally we show some examples.

Testing of Sonic-Absorbent Panels’ Behavior in Open-Air Environment

2012 ◽  
Author(s):  
Petru A. Pop ◽  
Patricia A. Ungur ◽  
Liviu Lazar ◽  
Mircea Gordan ◽  
Florin M. Marcu
Keyword(s):  
High Frequency ◽  
Noise Pollution ◽  
Sound Level ◽  
Sound Level Meter ◽  
Data Logger ◽  
Public Buildings ◽  
Gypsum Plaster ◽  
Level Meter ◽  
And Control

One wildly used method to reduce and control the noise pollution in green city’s buildings is using sonic-absorbent panels. Their applications can be multiple, such as the insulation of buildings, acoustic barriers and fences along the highway or in front of supermarkets, hospitals and other public buildings. This paper presents a method for testing the behavior of sonic-absorbent panels in open-air environment. The work represents a carrying on of previous research about absorbent materials from gypsum family, tested in lab conditions. The experiment setup used a dynamic installation and as a sample a stand formed by six sonic-absorbent panels from special modeling alpha-gypsum plaster. This installation has been composed of two loudspeakers for emitting the sound at a well-defined frequency by the first laptop, the microphone for detecting and transmitting the signal to the second laptop for analyzing and processing the data. All operations were performed using MATLAB Programs, while a Data Logger Sound Level Meter type CENTER 332 was put on near the microphone to compare both results. The first experiment of acoustic stand has been realized by setting up the installation at a frequency from 50 Hz to 1250 Hz and altering the distance between loudspeakers and stand at 0.5m to 1m and 1.5m, respectively. The second experiment kept the same test’s conditions, while two and three layers of sonic-absorbent panels formed the stand, respectively, but at same distance from source of 0.5 m. In both tests, the results underlined the good sonic-absorbent properties of these panels, especially at medium and high frequency, which can recommend using the panels for multiple outside applications.

Synergetic Concept of Software Control of Machining Processes on Metal-Cutting Machines

2021 ◽  
pp. 24-36
Author(s):  
V.L. Zakovorotny ◽  
V.E. Gvindzhiliya
Keyword(s):  
Tool Wear ◽  
Metal Cutting ◽  
Wear Testing ◽  
External Control ◽  
Machining Processes ◽  
Cutting Zone ◽  
Output Characteristics ◽  
The Cost ◽  
And Control ◽  
Cutting System

High precision metal-cutting machines ensure that the programmed machine actuator trajectories correspond to the real ones. For lathes these are the trajectories of the longitudinal and transverse calipers of the system, as well as the spindle. The purpose of processing is to produce parts of a given quality while minimizing the manufacturing costs. The condition of the dynamic cutting system, determined by the trajectories of forces and deformations, affects the quality indicators of parts and the cutting efficiency, which depends on the intensity of tool wear. The properties of the system change depending on the phase trajectory of the power of irreversible transformations of the energy supplied to the cutting zone by the work performed. Their changes related with the evolution of the parameters of the dynamic link formed by cutting are manifested in the development of tool wear and changes in the quality of the part. Thus, the power of irreversible energy transformations is one of the internal factors causing changes in the output characteristics of processing and the state of the process. In this regard, when processing on machine tools, there is a problem of synergistic coordination of external control (for example, the CNC program) with internal one, the source of which is the irreversible transformation of the energy supplied to the cutting zone. The article considers the problem of synergetic coordination of external and internal controls during cutting process, the solution of which will allow increasing the efficiency of processing on CNC machines. A mathematical model of a controlled dynamic cutting system and control algorithms are proposed to improve the efficiency of processing parts of a given quality while minimizing the intensity of tool wear. Testing of the developed algorithms has shown that their use reduces the cost of manufacturing parts by 1.2.

Sign in / Sign up

Export Citation Format

Share Document