scholarly journals Preliminary estimation of fat depth in the lamb short loin using a hyperspectral camera

2018 ◽  
Vol 58 (8) ◽  
pp. 1488 ◽  
Author(s):  
S. Rahman ◽  
P. Quin ◽  
T. Walsh ◽  
T. Vidal-Calleja ◽  
M. J. McPhee ◽  
...  
Keyword(s):  
Machine Learning ◽  
Near Infrared ◽  
Hyperspectral Image ◽  
Subcutaneous Fat ◽  
Ground Truth ◽  
Hyperspectral Data ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Total Fat ◽  
Hyperspectral Camera

The objectives of the present study were to describe the approach used for classifying surface tissue, and for estimating fat depth in lamb short loins and validating the approach. Fat versus non-fat pixels were classified and then used to estimate the fat depth for each pixel in the hyperspectral image. Estimated reflectance, instead of image intensity or radiance, was used as the input feature for classification. The relationship between reflectance and the fat/non-fat classification label was learnt using support vector machines. Gaussian processes were used to learn regression for fat depth as a function of reflectance. Data to train and test the machine learning algorithms was collected by scanning 16 short loins. The near-infrared hyperspectral camera captured lines of data of the side of the short loin (i.e. with the subcutaneous fat facing the camera). Advanced single-lens reflex camera took photos of the same cuts from above, such that a ground truth of fat depth could be semi-automatically extracted and associated with the hyperspectral data. A subset of the data was used to train the machine learning model, and to test it. The results of classifying pixels as either fat or non-fat achieved a 96% accuracy. Fat depths of up to 12 mm were estimated, with an R2 of 0.59, a mean absolute bias of 1.72 mm and root mean square error of 2.34 mm. The techniques developed and validated in the present study will be used to estimate fat coverage to predict total fat, and, subsequently, lean meat yield in the carcass.

scholarly journals Evaluating Variable Selection and Machine Learning Algorithms for Estimating Forest Heights by Combining Lidar and Hyperspectral Data

2020 ◽  
Vol 9 (9) ◽  
pp. 507
Author(s):  
Sanjiwana Arjasakusuma ◽  
Sandiaga Swahyu Kusuma ◽  
Stuart Phinn
Keyword(s):  
Machine Learning ◽  
Feature Selection ◽  
Learning Algorithms ◽  
Principal Component ◽  
Hyperspectral Data ◽  
Machine Learning Algorithms ◽  
Gradient Boosting ◽  
Support Vector ◽  
Forest Height ◽  
Extreme Gradient Boosting

Machine learning has been employed for various mapping and modeling tasks using input variables from different sources of remote sensing data. For feature selection involving high- spatial and spectral dimensionality data, various methods have been developed and incorporated into the machine learning framework to ensure an efficient and optimal computational process. This research aims to assess the accuracy of various feature selection and machine learning methods for estimating forest height using AISA (airborne imaging spectrometer for applications) hyperspectral bands (479 bands) and airborne light detection and ranging (lidar) height metrics (36 metrics), alone and combined. Feature selection and dimensionality reduction using Boruta (BO), principal component analysis (PCA), simulated annealing (SA), and genetic algorithm (GA) in combination with machine learning algorithms such as multivariate adaptive regression spline (MARS), extra trees (ET), support vector regression (SVR) with radial basis function, and extreme gradient boosting (XGB) with trees (XGbtree and XGBdart) and linear (XGBlin) classifiers were evaluated. The results demonstrated that the combinations of BO-XGBdart and BO-SVR delivered the best model performance for estimating tropical forest height by combining lidar and hyperspectral data, with R2 = 0.53 and RMSE = 1.7 m (18.4% of nRMSE and 0.046 m of bias) for BO-XGBdart and R2 = 0.51 and RMSE = 1.8 m (15.8% of nRMSE and −0.244 m of bias) for BO-SVR. Our study also demonstrated the effectiveness of BO for variables selection; it could reduce 95% of the data to select the 29 most important variables from the initial 516 variables from lidar metrics and hyperspectral data.

scholarly journals Performance Comparison of Machine Learning Algorithms for Estimating the Soil Salinity of Salt-Affected Soil Using Field Spectral Data

2019 ◽  
Vol 11 (22) ◽  
pp. 2605 ◽  
Author(s):  
Wang ◽  
Chen ◽  
Wang ◽  
Li
Keyword(s):  
Machine Learning ◽  
Spectral Data ◽  
Soil Salinity ◽  
Hyperspectral Data ◽  
Machine Learning Algorithms ◽  
Percentage Error ◽  
Support Vector ◽  
Boosted Regression Tree ◽  
Data Noise ◽  
Salt Affected Soil

Salt-affected soil is a prominent ecological and environmental problem in dry farming areas throughout the world. China has nearly 9.9 million km2 of salt-affected land. The identification, monitoring, and utilization of soil salinization have become important research topics for promoting sustainable progress. In this paper, using field-measured spectral data and soil salinity parameter data, through analysis and transformation of spectral data, five machine learning models, namely, random forest regression (RFR), support vector regression (SVR), gradient-boosted regression tree (GBRT), multilayer perceptron regression (MLPR), and least angle regression (Lars) are compared. The following performance measures of each model were evaluated: the collinear problems, handling data noise, stability, and the accuracy. In terms of these four aspects, the performance of each model on estimating soil salinity is evaluated. The results demonstrate that among the five models, RFR has the best performance in dealing with collinearity, RFR and MLPR have the best performance in dealing with data noise, and the SVR model is the most stable. The Lars model has the highest accuracy, with a determination coefficient (R2) of 0.87, ratio of performance to deviation (RPD) of 2.67, root mean square error (RMSE) of 0.18, and mean absolute percentage error (MAPE) of 0.11. Then, the comprehensive comparison and analysis of the five models are carried out, and it is found that the comprehensive performance of RFR model is the best; hence, this method is most suitable for estimating soil salinity using hyperspectral data. This study can provide a reference for the selection of regression methods in subsequent studies on estimating soil salinity using hyperspectral data.

scholarly journals Deep Learning and Conventional Machine Learning for Image-Based in-Situ Fault Detection During Laser Welding: A Comparative Study

2021 ◽  
Author(s):  
Christian Knaak ◽  
Moritz Kröger ◽  
Frederic Schulze ◽  
Peter Abels ◽  
Arnold Gillner
Keyword(s):  
Machine Learning ◽  
Deep Learning ◽  
Near Infrared ◽  
Learning Algorithms ◽  
Machine Learning Algorithms ◽  
Supervised Machine Learning ◽  
Support Vector ◽  
Detection Rates ◽  
Feature Extraction And Selection ◽  
Welding Defects

An effective process monitoring strategy is a requirement for meeting the challenges posed by increasingly complex products and manufacturing processes. To address these needs, this study investigates a comprehensive scheme based on classical machine learning methods, deep learning algorithms, and feature extraction and selection techniques. In a first step, a novel deep learning architecture based on convolutional neural networks (CNN) and gated recurrent units (GRU) is introduced to predict the local weld quality based on mid-wave infrared (MWIR) and near-infrared (NIR) image data. The developed technology is used to discover critical welding defects including lack of fusion (false friends), sagging and lack of penetration, and geometric deviations of the weld seam. Additional work is conducted to investigate the significance of various geometrical, statistical, and spatio-temporal features extracted from the keyhole and weld pool regions. Furthermore, the performance of the proposed deep learning architecture is compared to that of classical supervised machine learning algorithms, such as multi-layer perceptron (MLP), logistic regression (LogReg), support vector machines (SVM), decision trees (DT), random forest (RF) and k-Nearest Neighbors (kNN). Optimal hyperparameters for each algorithm are determined by an extensive grid search. Ultimately, the three best classification models are combined into an ensemble classifier that yields the highest detection rates and achieves the most robust estimation of welding defects among all classifiers studied, which is validated on previously unknown welding trials.

scholarly journals Ice Detection on Aircraft Surface Using Machine Learning Approaches Based on Hyperspectral and Multispectral Images

Drones ◽  
2020 ◽  
Vol 4 (3) ◽  
pp. 45
Author(s):  
Maria Angela Musci ◽  
Luigi Mazzara ◽  
Andrea Maria Lingua
Keyword(s):  
Machine Learning ◽  
Low Cost ◽  
Critical Role ◽  
Operating Time ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
Learning Approaches ◽  
Ice Detection ◽  
Under Construction ◽  
Hyperspectral Camera

Aircraft ground de-icing operations play a critical role in flight safety. However, to handle the aircraft de-icing, a considerable quantity of de-icing fluids is commonly employed. Moreover, some pre-flight inspections are carried out with engines running; thus, a large amount of fuel is wasted, and CO2 is emitted. This implies substantial economic and environmental impacts. In this context, the European project (reference call: MANUNET III 2018, project code: MNET18/ICT-3438) called SEI (Spectral Evidence of Ice) aims to provide innovative tools to identify the ice on aircraft and improve the efficiency of the de-icing process. The project includes the design of a low-cost UAV (uncrewed aerial vehicle) platform and the development of a quasi-real-time ice detection methodology to ensure a faster and semi-automatic activity with a reduction of applied operating time and de-icing fluids. The purpose of this work, developed within the activities of the project, is defining and testing the most suitable sensor using a radiometric approach and machine learning algorithms. The adopted methodology consists of classifying ice through spectral imagery collected by two different sensors: multispectral and hyperspectral camera. Since the UAV prototype is under construction, the experimental analysis was performed with a simulation dataset acquired on the ground. The comparison among the two approaches, and their related algorithms (random forest and support vector machine) for image processing, was presented: practical results show that it is possible to identify the ice in both cases. Nonetheless, the hyperspectral camera guarantees a more reliable solution reaching a higher level of accuracy of classified iced surfaces.

scholarly journals Simulated Annealing-Based Hyperspectral Data Optimization for Fish Species Classification: Can the Number of Measured Wavelengths Be Reduced?

2021 ◽  
Vol 11 (22) ◽  
pp. 10628
Author(s):  
John Chauvin ◽  
Ray Duran ◽  
Kouhyar Tavakolian ◽  
Alireza Akhbardeh ◽  
Nicholas MacKinnon ◽  
...  
Keyword(s):  
Machine Learning ◽  
Simulated Annealing ◽  
Spectral Data ◽  
Near Infrared ◽  
Tunable Filter ◽  
Hyperspectral Data ◽  
Machine Learning Algorithms ◽  
Imaging Systems ◽  
Large Set ◽  
Scanning Method

Relative to standard red/green/blue (RGB) imaging systems, hyperspectral imaging systems offer superior capabilities but tend to be expensive and complex, requiring either a mechanically complex push-broom line scanning method, a tunable filter, or a large set of light emitting diodes (LEDs) to collect images in multiple wavelengths. This paper proposes a new methodology to support the design of a hypothesized system that uses three imaging modes—fluorescence, visible/near-infrared (VNIR) reflectance, and shortwave infrared (SWIR) reflectance—to capture narrow-band spectral data at only three to seven narrow wavelengths. Simulated annealing is applied to identify the optimal wavelengths for sparse spectral measurement with a cost function based on the accuracy provided by a weighted k-nearest neighbors (WKNN) classifier, a common and relatively robust machine learning classifier. Two separate classification approaches are presented, the first using a multi-layer perceptron (MLP) artificial neural network trained on sparse data from the three individual spectra and the second using a fusion of the data from all three spectra. The results are compared with those from four alternative classifiers based on common machine learning algorithms. To validate the proposed methodology, reflectance and fluorescence spectra in these three spectroscopic modes were collected from fish fillets and used to classify the fillets by species. Accuracies determined from the two classification approaches are compared with benchmark values derived by training the classifiers with the full resolution spectral data. The results of the single-layer classification study show accuracies ranging from ~68% for SWIR reflectance to ~90% for fluorescence with just seven wavelengths. The results of the fusion classification study show accuracies of about 95% with seven wavelengths and more than 90% even with just three wavelengths. Reducing the number of required wavelengths facilitates the creation of rapid and cost-effective spectral imaging systems that can be used for widespread analysis in food monitoring/food fraud, agricultural, and biomedical applications.

scholarly journals Machine Learning for Estimating Leaf Dust Retention Based on Hyperspectral Measurements

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Wenlong Jing ◽  
Xia Zhou ◽  
Chen Zhang ◽  
Chongyang Wang ◽  
Hao Jiang
Keyword(s):  
Machine Learning ◽  
Southern China ◽  
Regional Scale ◽  
Hyperspectral Data ◽  
Machine Learning Algorithms ◽  
Classification And Regression Tree ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Plant Leaves ◽  
Dust Retention

Hyperspectral sensors provide detailed information for dust retention content (DRC) estimation. However, rich hyperspectral data are not fully utilized by traditional image analysis techniques. We integrated several recently developed machine learning algorithms to estimate DRC on plant leaves using the spectra measured by the ASD FieldSpec 3. The experiments were carried out on three common green plants of southern China. The important hyperspectral variables were first identified by applying the random forest (RF) algorithm. Three estimation models were then developed using the support vector machine (SVM), classification and regression tree (CART), and RF algorithms. The results showed that the increase in dust retention contents on plant leaves enhanced their reflectance in the visible wavelength but weakened their reflectance in the infrared wavelength. Wavelengths in the ranges of 450–500 nm, 550–600 nm, 750–1000 nm, and 1100–1300 nm were identified as important variables using the RF algorithm and were used to estimate the DRC. The comparison of the three machine learning techniques for DRC estimation confirmed that the SVM and RF models performed well because their estimations were similar to the measured DRC. Specifically, the average R2 for SVM and RF model are 0.85 and 0.88. The technical approach of this study proved to be a successful illustration of using hyperspectral measurements to estimate the DRC on plant leaves. The findings of this study can be applied to monitor the DRC on leaves of other plants and can also be integrated with other types of spectral data to measure the DRC at a regional scale.

scholarly journals Machine Learning-Based Approach to Predict Insect-Herbivory-Damage and Insect-Type Attack in Maize Plants Using Hyperspectral Data

2021 ◽  
Author(s):  
Danielle Elis Garcia Furuya ◽  
Mayara Maezano Faita Pinheiro ◽  
Felipe David Georges Gomes ◽  
Wesley Nunes Gonçalves ◽  
José Marcato Júnior ◽  
...  
Keyword(s):  
Machine Learning ◽  
Near Infrared ◽  
Crop Yields ◽  
Spectral Response ◽  
Insect Herbivory ◽  
Hyperspectral Data ◽  
Support Vector ◽  
Reflectance Measurement ◽  
Maize Plants ◽  
The Impact

A strategy to reduce qualitative and quantitative losses in crop-yields refers to early and accurate detection of insect-damage caused in plants. Remote sensing systems like hyperspectral proximal sensors are a promising strategy for managing crops. In this aspect, machine learning predictions associated with clustering techniques may be an interesting approach mainly because of its robustness to evaluate high dimensional data. In this paper, we model the spectral response of insect-herbivory-damage in maize plants and propose an approach based on machine learning and a clustering method to predict whether the plant is herbivore-attacked or not using leaf reflectance measurements. We differentiate insect-type damage based on the spectral response and indicate the most contributive wavelengths to perform it. For this, we used a maize experiment in semi-field conditions. The maize plants were submitted to three different treatments: control (health plants); plants submitted to Spodoptera frugiperda herbivory-damage, and; plants submitted to Dichelops melacanthus herbivory-damage. The leaf spectral response of all plants (controlled and submitted to herbivory) was measured with a FieldSpec 3.0 Spectroradiometer from 350 to 2500 nm for eight consecutive days. We evaluated the performance of different learners like random forest (RF), support vector machine (SVM), extreme gradient boost (XGB), neural networks (MLP), and measured the impact of a day-by-day analysis into the prediction. We proposed a novel framework with a ranking strategy, based on the accuracy returned by predictions, and a clusterization method based on a self-organizing map (SOM) to identify important regions in the reflectance measurement. Our results indicated that the RF-based framework algorithm is the overall best learner to deal with this type of data. After the 5th day of analysis, the accuracy of the algorithm improved substantially. It separated the three treatments into different groups with an F-measure equal to 0.967, 0.917, and 0.881, respectively. We also verified that the most contributive spectral regions are situated in the near-infrared domain. We conclude that the proposed approach with machine learning methods is adequate to monitor herbivory-damage of S. frugiperda and stink bugs like Dichelops melacanthus in maize, differentiating the types of insect-attack early on. We also demonstrate that the framework proposed for the analysis of the most contributive wavelengths is suitable to highlight spectral regions of interest.

Using Machine Learning Algorithms on Prediction of Stock Price

2020 ◽  
Vol 12 (2) ◽  
pp. 84-99
Author(s):  
Li-Pang Chen
Keyword(s):  
Machine Learning ◽  
Stock Price ◽  
Short Term Memory ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Short Term ◽  
Learning Techniques ◽  
Historical Database ◽  
Long Short Term Memory

In this paper, we investigate analysis and prediction of the time-dependent data. We focus our attention on four different stocks are selected from Yahoo Finance historical database. To build up models and predict the future stock price, we consider three different machine learning techniques including Long Short-Term Memory (LSTM), Convolutional Neural Networks (CNN) and Support Vector Regression (SVR). By treating close price, open price, daily low, daily high, adjusted close price, and volume of trades as predictors in machine learning methods, it can be shown that the prediction accuracy is improved.

A Comparative Study of Different Machine Learning Algorithms for Disease Prediction

2017 ◽  
Vol 7 (7) ◽  
pp. 172
Author(s):  
Anantvir Singh Romana
Keyword(s):  
Machine Learning ◽  
Subsequent Treatment ◽  
Machine Learning Algorithms ◽  
Machine Learning Techniques ◽  
Support Vector ◽  
Disease Prediction ◽  
Classification Problems ◽  
Learning Techniques ◽  
Neural Network Classifiers ◽  
Diagnostic Detection

Accurate diagnostic detection of the disease in a patient is critical and may alter the subsequent treatment and increase the chances of survival rate. Machine learning techniques have been instrumental in disease detection and are currently being used in various classification problems due to their accurate prediction performance. Various techniques may provide different desired accuracies and it is therefore imperative to use the most suitable method which provides the best desired results. This research seeks to provide comparative analysis of Support Vector Machine, Naïve bayes, J48 Decision Tree and neural network classifiers breast cancer and diabetes datsets.

scholarly journals Predicting Future Occurrence of Acute Hypotensive Episodes Using Noninvasive and Invasive Features

2021 ◽  
Vol 186 (Supplement_1) ◽  
pp. 445-451
Author(s):  
Yifei Sun ◽  
Navid Rashedi ◽  
Vikrant Vaze ◽  
Parikshit Shah ◽  
Ryan Halter ◽  
...  
Keyword(s):  
Machine Learning ◽  
Support Vector Machine ◽  
Real World ◽  
Short Term Memory ◽  
Model Performance ◽  
Learning Technologies ◽  
Machine Learning Algorithms ◽  
Support Vector ◽  
K Nearest Neighbor ◽  
Continuous Map

ABSTRACT Introduction Early prediction of the acute hypotensive episode (AHE) in critically ill patients has the potential to improve outcomes. In this study, we apply different machine learning algorithms to the MIMIC III Physionet dataset, containing more than 60,000 real-world intensive care unit records, to test commonly used machine learning technologies and compare their performances. Materials and Methods Five classification methods including K-nearest neighbor, logistic regression, support vector machine, random forest, and a deep learning method called long short-term memory are applied to predict an AHE 30 minutes in advance. An analysis comparing model performance when including versus excluding invasive features was conducted. To further study the pattern of the underlying mean arterial pressure (MAP), we apply a regression method to predict the continuous MAP values using linear regression over the next 60 minutes. Results Support vector machine yields the best performance in terms of recall (84%). Including the invasive features in the classification improves the performance significantly with both recall and precision increasing by more than 20 percentage points. We were able to predict the MAP with a root mean square error (a frequently used measure of the differences between the predicted values and the observed values) of 10 mmHg 60 minutes in the future. After converting continuous MAP predictions into AHE binary predictions, we achieve a 91% recall and 68% precision. In addition to predicting AHE, the MAP predictions provide clinically useful information regarding the timing and severity of the AHE occurrence. Conclusion We were able to predict AHE with precision and recall above 80% 30 minutes in advance with the large real-world dataset. The prediction of regression model can provide a more fine-grained, interpretable signal to practitioners. Model performance is improved by the inclusion of invasive features in predicting AHE, when compared to predicting the AHE based on only the available, restricted set of noninvasive technologies. This demonstrates the importance of exploring more noninvasive technologies for AHE prediction.

Sign in / Sign up

Export Citation Format

Share Document