Introduction to RNAi in plant production and protection.

Author(s):  
Bruno Mezzetti ◽  
Jeremy Sweet ◽  
Lorenzo Burgos

Abstract This chapter focuses on the various applications of RNAi in agriculture, horticulture and forestry, the biosafety of these applications, and the socioeconomic aspects of these potential applications.

2017 ◽  
Vol 111 ◽  
pp. 1-9 ◽  
Author(s):  
John R. Lamont ◽  
Olivia Wilkins ◽  
Margaret Bywater-Ekegärd ◽  
Donald L. Smith

Agronomy ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 2229
Author(s):  
Iqra Bano ◽  
Sylvie Skalickova ◽  
Hira Sajjad ◽  
Jiri Skladanka ◽  
Pavel Horky

Plant production today depends on the ability of agriculturists to transport and recycle minerals, particularly those minerals which are nutritionally important to animals and human beings, through various agriculture products. It is important to note that the attenuation of these mineral deposits by green plants, as well as their subsequent role in the production of organic compounds, is fundamental to almost all known forms of life. Selenium (Se) is among those trace mineral which are crucial for the maintenance of plant physiology. The significance, production, and biological effects of this element, as well as its application in sustainable development, are remaining an interesting topic of discussion. Moreover, there has been a huge rise in the potential applications of nanotechnology in the food and agriculture industries. Several studies have been conducted on the various biological activities of selenium nanoparticles (SeNPs) and their biosynthesis. There is plenty of research performed on the effects of Se in plant nutrition and physiology, but there is a lack of information about the effects of SeNPs in SeNPs toxicity, and other aspects of using SeNPs in agriculture. The current review is focused on recent information related to the effects and fate of SeNPs in agronomy. We also aimed attention at the primary sources and behavior of Se in different environments, such as soil, water, air, and plants. All the data provides an extremely fertile domain for future investigation and research.


HortScience ◽  
2019 ◽  
Vol 54 (9) ◽  
pp. 1448-1458 ◽  
Author(s):  
Celina Gómez ◽  
Christopher J. Currey ◽  
Ryan W. Dickson ◽  
Hye-Ji Kim ◽  
Ricardo Hernández ◽  
...  

The recent increased market demand for locally grown produce is generating interest in the application of techniques developed for controlled environment agriculture (CEA) to urban agriculture (UA). Controlled environments have great potential to revolutionize urban food systems, as they offer unique opportunities for year-round production, optimizing resource-use efficiency, and for helping to overcome significant challenges associated with the high costs of production in urban settings. For urban growers to benefit from CEA, results from studies evaluating the application of controlled environments for commercial food production should be considered. This review includes a discussion of current and potential applications of CEA for UA, references discussing appropriate methods for selecting and controlling the physical plant production environment, resource management strategies, considerations to improve economic viability, opportunities to address food safety concerns, and the potential social benefits from applying CEA techniques to UA. Author’s viewpoints about the future of CEA for urban food production are presented at the end of this review.


Plants ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 8
Author(s):  
Romeo Rojas ◽  
Julio César Tafolla-Arellano ◽  
Guillermo C. G. Martínez-Ávila

Euphorbia antisyphilitica Zucc, better known as the candelilla plant, is one of the 10 non-timber forest products of greatest economic importance in the desert and semi-desert regions of Mexico. Moreover, it is a potential source of some functional phytochemicals such as polyphenolic compounds, wax and fiber, with potential applications in food, cosmetic and pharmaceutical industries. Thus, this review aims to describe these phytochemicals and their functional properties as antimicrobial, antioxidant, reinforcing and barrier agents. In addition, a suitable valorization of the candelilla plant and its byproducts is mandatory in order to avoid negative effects on the environment. This review provides, for the first time, an overview of the alternative methodologies for improving candelilla plant production, pointing out some of the agricultural aspects of the cultivation of this plant.


Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove ◽  
R. T. Tung

The cobalt disilicide/silicon system has potential applications as a metal-base and as a permeable-base transistor. Although thin, low defect density, films of CoSi2 on Si(111) have been successfully grown, there are reasons to believe that Si(100)/CoSi2 may be better suited to the transmission of electrons at the silicon/silicide interface than Si(111)/CoSi2. A TEM study of the formation of CoSi2 on Si(100) is therefore being conducted. We have previously reported TEM observations on Si(111)/CoSi2 grown both in situ, in an ultra high vacuum (UHV) TEM and ex situ, in a conventional Molecular Beam Epitaxy system.The procedures used for the MBE growth have been described elsewhere. In situ experiments were performed in a JEOL 200CX electron microscope, extensively modified to give a vacuum of better than 10-9 T in the specimen region and the capacity to do in situ sample heating and deposition. Cobalt was deposited onto clean Si(100) samples by thermal evaporation from cobalt-coated Ta filaments.


Author(s):  
D. L. Callahan ◽  
Z. Ball ◽  
H. M. Phillips ◽  
R. Sauerbrey

Ultraviolet laser-irradiation can be used to induce an insulator-to-conductor phase transition on the surface of Kapton polyimide. Such structures have potential applications as resistors or conductors for VLSI applications as well as general utility electrodes. Although the percolative nature of the phase transformation has been well-established, there has been little definitive work on the mechanism or extent of transformation. In particular, there has been considerable debate about whether or not the transition is primarily photothermal in nature, as we propose, or photochemical. In this study, cross-sectional optical microscopy and transmission electron microscopy are utilized to characterize the nature of microstructural changes associated with the laser-induced pyrolysis of polyimide.Laser-modified polyimide samples initially 12 μm thick were prepared in cross-section by standard ultramicrotomy. Resulting contraction in parallel to the film surface has led to distortions in apparent magnification. The scale bars shown are calibrated for the direction normal to the film surface only.


Author(s):  
Amanda K. Petford-Long ◽  
A. Cerezo ◽  
M.G. Hetherington

The fabrication of multilayer films (MLF) with layer thicknesses down to one monolayer has led to the development of materials with unique properties not found in bulk materials. The properties of interest depend critically on the structure and composition of the films, with the interfacial regions between the layers being of particular importance. There are a number of magnetic MLF systems based on Co, several of which have potential applications as perpendicular magnetic (e.g Co/Cr) or magneto-optic (e.g. Co/Pt) recording media. Of particular concern are the effects of parameters such as crystallographic texture and interface roughness, which are determined by the fabrication conditions, on magnetic properties and structure.In this study we have fabricated Co-based MLF by UHV thermal evaporation in the prechamber of an atom probe field-ion microscope (AP). The multilayers were deposited simultaneously onto cobalt field-ion specimens (for AP and position-sensitive atom probe (POSAP) microanalysis without exposure to atmosphere) and onto the flat (001) surface of oxidised silicon wafers (for subsequent study in cross-section using high-resolution electron microscopy (HREM) in a JEOL 4000EX. Deposi-tion was from W filaments loaded with material in the form of wire (Co, Fe, Ni, Pt and Au) or flakes (Cr). The base pressure in the chamber was around 8×10−8 torr during deposition with a typical deposition rate of 0.05 - 0.2nm/s.


2020 ◽  
Vol 13 (5) ◽  
pp. 1429-1461 ◽  
Author(s):  
Xiaona Li ◽  
Jianwen Liang ◽  
Xiaofei Yang ◽  
Keegan R. Adair ◽  
Changhong Wang ◽  
...  

This review focuses on fundamental understanding, various synthesis routes, chemical/electrochemical stability of halide-based lithium superionic conductors, and their potential applications in energy storage as well as related challenges.


2019 ◽  
Vol 10 (45) ◽  
pp. 6116-6121 ◽  
Author(s):  
Tan Ji ◽  
Lei Xia ◽  
Wei Zheng ◽  
Guang-Qiang Yin ◽  
Tao Yue ◽  
...  

We present a new family of porphyrin-functionalized coordination star polymers prepared through combination of coordination-driven self-assembly and post-assembly polymerization. Their self-assembly behaviour in water and potential for photodynamic therapy were demonstrated.


2020 ◽  
Vol 48 (2) ◽  
pp. 399-409
Author(s):  
Baizhen Gao ◽  
Rushant Sabnis ◽  
Tommaso Costantini ◽  
Robert Jinkerson ◽  
Qing Sun

Microbial communities drive diverse processes that impact nearly everything on this planet, from global biogeochemical cycles to human health. Harnessing the power of these microorganisms could provide solutions to many of the challenges that face society. However, naturally occurring microbial communities are not optimized for anthropogenic use. An emerging area of research is focusing on engineering synthetic microbial communities to carry out predefined functions. Microbial community engineers are applying design principles like top-down and bottom-up approaches to create synthetic microbial communities having a myriad of real-life applications in health care, disease prevention, and environmental remediation. Multiple genetic engineering tools and delivery approaches can be used to ‘knock-in' new gene functions into microbial communities. A systematic study of the microbial interactions, community assembling principles, and engineering tools are necessary for us to understand the microbial community and to better utilize them. Continued analysis and effort are required to further the current and potential applications of synthetic microbial communities.


Sign in / Sign up

Export Citation Format

Share Document