Markets and competition.

2021 ◽  
pp. 51-71
Author(s):  
Berkeley Hill
Keyword(s):  
Price System ◽  
Monopoly Power ◽  
Perfect Competition ◽  
General Description ◽  
Market Models ◽  
Different Types ◽  
Agricultural Producer ◽  
Price Movements ◽  
The Individual

Abstract Following an introduction into the functions of the price system and a general description of markets, this chapter examines three market models in more detail: first, perfect competition viewed from the levels of the individual agricultural producer and of the whole industry; secondly, monopoly; and thirdly, monopsony. The use of monopoly power in agriculture is discussed, as well as different types of price movements in agriculture.

GENERAL CHARACTERISTIC OF TEA IN THE MARKETS OF TURKESTAN IN THE XIX-XX CENTURIES

2019 ◽  
Vol 16 (2) ◽  
pp. 55-60
Author(s):  
Maxfuza Mamatova ◽  
Keyword(s):  
General Characteristic ◽  
General Description ◽  
Different Types ◽  
History Of

This article deals with the general description of tea in the markets of Turkestan,provides an overview of the history of our country in the XIX-XX centuries, which based on archival materials and sources. This article tells about the types and varieties of tea consumed by our people, about the different types of tea that replace tea, where they were brought from, the meanings of their historical names and the consumption that was loved by our people.

scholarly journals Selected In Situ Hybridization Methods: Principles and Application

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3874
Author(s):  
Dominika Veselinyová ◽  
Jana Mašlanková ◽  
Katarina Kalinová ◽  
Helena Mičková ◽  
Mária Mareková ◽  
...  
Keyword(s):  
In Situ Hybridization ◽  
Imaging Techniques ◽  
Cell Communication ◽  
Probe Design ◽  
Rapid Progress ◽  
In Situ Techniques ◽  
Different Types ◽  
Laboratory Procedures ◽  
The Individual

We are experiencing rapid progress in all types of imaging techniques used in the detection of various numbers and types of mutation. In situ hybridization (ISH) is the primary technique for the discovery of mutation agents, which are presented in a variety of cells. The ability of DNA to complementary bind is one of the main principles in every method used in ISH. From the first use of in situ techniques, scientists paid attention to the improvement of the probe design and detection, to enhance the fluorescent signal intensity and inhibition of cross-hybrid presence. This article discusses the individual types and modifications, and is focused on explaining the principles and limitations of ISH division on different types of probes. The article describes a design of probes for individual types of in situ hybridization (ISH), as well as the gradual combination of several laboratory procedures to achieve the highest possible sensitivity and to prevent undesirable events accompanying hybridization. The article also informs about applications of the methodology, in practice and in research, to detect cell to cell communication and principles of gene silencing, process of oncogenesis, and many other unknown processes taking place in organisms at the DNA/RNA level.

The Nature of Political Thought

1923 ◽  
Vol 17 (2) ◽  
pp. 204-215
Author(s):  
Raymond G. Gettell
Keyword(s):  
Political Thought ◽  
Social Life ◽  
Political Organization ◽  
Present Condition ◽  
Medieval Period ◽  
Economic Interests ◽  
Different Types ◽  
Philosophy Professor ◽  
Political Conditions ◽  
The Individual

In the introduction to his readings in political philosophy, Professor Coker says, “since the time of Plato there has been, in every philosophic age, some inquiry as to the justification of political organization in general, as to the relative merits of different political forms, and as to the appropriate position and privileges of the individual as master, member, or subject of the political order of society. Why do we have political organization? What in our present condition do we owe to it? What future benefits may we properly expect to derive from it? Are its purposes characteristically manifold and changing, or are they ultimately reducible to a few limited objects or to some single end? What is its best form? Who should control it? What is its proper relation to the ideas and sentiments of the community at its basis? What spheres of individual and social life is it incompetent to enter? Philosophers and publicists of various types have sought to answer these questions in abstract terms.”If an analysis be made of the questions with which political thought has been concerned, it is found that emphasis was placed at various periods upon widely different types of problems. In the medieval period political controversy centered in the contest for supremacy between spiritual and temporal authorities; in the seventeenth and eighteenth centuries, the dominant interest was in the contest between monarchic and democratic theories of political organization; at present, the extent of state activities has come into prominence, and the connection between political and economic interests is especially close. Besides, political conditions have changed so greatly from age to age that the same problem had quite different meanings at different periods.

The Effect of Stand-Off Distance on the Structure and Properties of Zirconium – Carbon Steel Bimetal Produced by Explosion Welding / Wpływ Odległości Blach Na Strukturę I Własności Bimetalu Cyrkon - Stal Wytworzonego Technologią Zgrzewania Wybuchowego

2012 ◽  
Vol 57 (4) ◽  
pp. 1201-1210 ◽  
Author(s):  
M. Prażmowski ◽  
H. Paul
Keyword(s):  
Carbon Steel ◽  
Optical Microscopy ◽  
Longitudinal Section ◽  
Strength Properties ◽  
Strength Distribution ◽  
Explosion Welding ◽  
General Description ◽  
Bond Zone ◽  
Bond Interface ◽  
The Individual

This study focuses on the effect of the stand-off distance between the bonded plates on the properties of zirconium (Zr700) - steel (P355NL2) bimetal produced by explosion welding. Bonding trials were carried out in parallel arrangement at constant detonation velocity. The analyses of microstructural transformations occurring in the bond zone and mechanical properties of the clad were performed for as-bonded welds, i.e. immediately following explosion welding. A general description of the obtained welds was made (height and length of the wave was determined) and the quantitative fraction of the melt zones was calculated along the bond’s length. Using optical microscopy and scanning electron microscopy (SEM) enabled the assessment of the quality of the formed bonds, initial identification of phases and quantitative analysis of the individual phases on the longitudinal section. The microhardness results were used in the analysis of hardening changes at the interface area. The completed research proves the potential to obtain a proper bond for zirconium/carbon steel sheets. A strong effect of the stand-off distance on the strength properties of the fabricated plates was observed, and the ’direction’ of these transformations was pointed out. Optical microscopy and SEM examinations allowed determining the characteristic of the bond interface for diverse stand-off distances. It was established that increasing the stand-off distance between the plates causes the reduction of the melt area along the length of the bond, which improves strength properties of the bimetal. The analysis of the strength distribution performed based on the microhardness measurements showed that the changes occur within the distances up to 500µm from the bond interface and the highest hardening, for both zirconium and steel, is directly at the interface and then successively decreases.

PRAGMATIC POTENTIAL OF AUTHOR’S AND TRANSFORMED PHRASEOLOGIES IN THE WORK OF CARLOS RUIZ ZAFÓN «THE PRISONER OF HEAVEN»

2021 ◽  
pp. 18-28
Author(s):  
A. Yu. Bovsunivska A. Yu.
Keyword(s):  
Emotional State ◽  
Spanish Language ◽  
The Novel ◽  
Unique Combination ◽  
Textual Space ◽  
Different Types ◽  
General Linguistic ◽  
The Individual ◽  
Pragmatic Aspects ◽  
Individual Style

The article is devoted to the study of pragmatic aspects of the use of phraseology in the textual space of Carlos Ruiz Safón’s novel «Prisoner of Heaven». One of the defining features of the individual style of this well-known modern Spanish writer is the metaphoricity and figuration of aristic expression, the saturation of the text with phraseological units that play a significant role in creating a pragmatic charge of the work of art. Along with general linguistic phraseological units, which include commonly-used vocabulary, the author uses dialectal and authorial phraseological units, which is a feature of his individual style. All three designated groups of phraseological units mostly reflect the negative psychophysical and emotional state of the characters. The author uses dialectal, individually-authorial and modified phraseological units, which is a feature of his individual style. It is determined that transformation is one of the most productive and most effective ways to update linguistic means in works of art. Author’s modification of FU leads to a change in the semantics and structure of expression, gives it a more expressive or emotional coloring. Transformed phraseology is limited to individual usage and is subject to the context of the work. Modified FUs in the Zafón’s artistic space acquire certain aesthetic and artistic qualities. Their modification is mainly to create the desired stylistic effect – to achieve emotional or expressive expression, which increases the reader’s interest, focuses on the content, issues of the work, as well as reveals the potential expressive potential of the Spanish language. In the transformed FUs, not just a new meaning is traced, but a combination of the well-known and the occasional. The unique combination of different types of phraseological units in the novel is considered a manifestation of individual style and makes a representation of the individually-authorial linguistic picture of the world more expressive.

A study on orthodontic retention practices in Nepal

2021 ◽  
Vol 11 (1) ◽  
pp. 29-33
Author(s):  
Anjana Karmacharya ◽  
Dashrath Kafle ◽  
Ram Bhakta Adhikari ◽  
Nirjalla Malla
Keyword(s):  
Social Sciences ◽  
Background Information ◽  
Specific Situation ◽  
Multiple Choice Questions ◽  
Short Answer ◽  
Different Types ◽  
The Individual ◽  
Retention Practices ◽  
Survey Questionnaires

Introduction: Retainers are used after all orthodontic treatment, to prevent or minimize relapse and recurrence. Among various retainers used, Hawley retainer and ‘invisible’ retainers are the most common. Most of the orthodontists favored permanent retention. It is obvious that the retention procedures are variable and depended largely on personal preferences, and there does not seem to be any consistent pattern in the application of retention methodologies. The  purpose of this study was to survey the retention protocols among orthodontists in Nepal. Materials and Method: The complete lists of the names and addresses of orthodontists in Nepal was obtained from the ODOAN. The questionnaire was sent to them which consisted of multiple-choice questions and short answer, related to background information of the individual orthodontist, retention use in general, the frequency of different types of bonded or removable retainers that are used, the retention protocol, the type of retainer used in specific situation. All statistical analyses were performed using the Statistical Package for Social Sciences (SPSS), version 12.0.1 (SPSS Inc, Chicago, Illinois, USA) Result: The survey questionnaires were completed by 90.42% of the 94 orthodontists of Nepal, 58.8% males and 41.2% females with a mean age of 36.7 years. Most of the orthodontists used a clear (vacuum) retainer (80%) in the maxilla and fixed bonded retainer in the mandible. Most of them prefer the use of retainer for a continuous 24 hours except during eating and brushing for 6 months to 1 year (56.5%) and if possible, for 1 to 2 years (28.2%). Conclusion: Majority of Nepalese orthodontists provide vacuum formed retainer on maxillary arch and bonded retainer in mandibular arch. There is no specific consensus on other type of retainers, duration of wear and follow up visits which is affected by various other factors.

scholarly journals МОДЕРНІЗАЦІЯ ПРОГРАМНО-ТЕХНІЧНОГО КОМПЛЕКСУ ПТК-МСБ-2 ДЛЯ АВТОМАТИЗАЦІЇ РЕСУРСНИХ ВИПРОБУВАНЬ ВЕРТОЛЬОТІВ

2018 ◽  
pp. 128-132
Author(s):  
Нина Николаевна Лопунова ◽  
Вадим Владимирович Нерубасский
Keyword(s):  
Remote Control ◽  
Control Panel ◽  
General Description ◽  
Test Cycle ◽  
Sensors And Actuators ◽  
Test Stage ◽  
Communication Device ◽  
Upper Level ◽  
The Individual ◽  
Technical Complex

Today, Motor Sich JSC is developing its helicopter production. At the same time, great attention is paid to the creation of an infrastructure that should provide a full cycle of development and testing of new and modernized  helicopter assemblies. For resource testing of the power plant, the carrier system and transmission of the MSB-2 helicopter was created an open stand. To modernization the stand the program-technical complex PTK-MSB-2 was developed and implemented.A general description of the composition and structure of the open rig for resource testing of the MSB-2 light helicopter is given. The rig equipment includes a control panel with helicopter remote control, power supplies, sensors and actuators, communication channels. The control panel allows performing all technological operations for start/stop of two AI-450M turboshaft engines, helicopter remote control along seven channels (using seven servo-amplifiers/servomotors). It is indicated that the main means of automation of the rig is the PTC-MSB-2 program-technical complex. The basic elements and principles of operation of the hardware of PTC-MSB-2 are described. PTC-MSB-2 hardware consists of two hierarchical levels: the lower and the upper. Lower level consists of the cabs of the communication device with the object. The upper level of the PTC is two workstations (WS1 and WS2) and matrix printer. The software tools of PTC-MSB-2, their main functions and features of functioning are considered in detail. It is noted that the Running the software components is possible when the individual measuring channels fail, and when the WS2 fails. At the same time, the functions of the failed components are terminated.The goals of the modernization of the PTC-MSB-2 are listed, the principles for the implementation of algorithms for emergency protection and automation of helicopter resource testing are described. The chosen principle of automation of cyclic tests is based on the concepts of test mode, test cycle and test stage. There is a normal and emergency interruption of the test cycle. With a normal interruption, it is possible to resume the test stage from the next test cycle. The features of testing automation in regular and abnormal situations are briefly described.

scholarly journals Death following accidental compression of neck by safety harness: A case of fall from height

2021 ◽  
Vol 8 (4) ◽  
pp. 258-261
Author(s):  
Bedanta Sarma ◽  
Shreemanta Kumar Dash ◽  
Pankaj Suresh Ghormade
Keyword(s):  
Spinal Cord ◽  
Cervical Spine ◽  
Economic Burden ◽  
Construction Sites ◽  
Work Related ◽  
The Family ◽  
Different Types ◽  
Proper Training ◽  
Fall From Height ◽  
The Individual

Work related fall from height many a times causes fatal injuries and death amongst working in various construction sites. It leads to different types of fatal bodily injuries including spinal injuries causing economic burden to the family. Although, they have been provided with protective gears and proper training for its use; it has been observed that workers are not using these in a proper ways. They eventually met with accidents which can easily be prevented. Accidental compression of neck by safety harness following fall from height has rarely been described leading to death of the individual. A case was brought for autopsy following accidental compression of neck structure causing fracture of cervical spine and transaction of spinal cord. In this paper, the case has been described with its autopsy findings.

scholarly journals Farms Typologies and Their Impact on the Development of Rural Areas in Moldova

2018 ◽  
Vol 1 (1) ◽  
pp. 190-195
Author(s):  
Liliana Cimpoies ◽  
Elena Semionova
Keyword(s):  
Cluster Analysis ◽  
Rural Areas ◽  
Agricultural Production ◽  
Rural Economy ◽  
Family Farms ◽  
Market Place ◽  
Sustainable Rural Development ◽  
Different Types ◽  
The Individual ◽  
Academy Of Sciences

Abstract For Moldova’s agriculture are characterized the existence of many small family farms and only a small number of corporate holdings (limited liabilities companies, agricultural production cooperatives etc). Most of individual farms, small by size produce only for own family consumption and cannot find their way to the market place. The accentuated poverty makes rural economy to flow more and more to a natural subsistence economy, isolating itself from the market economy. The goal of this paper is to delimitate different types of farms based on selected indicators and to appreciate their level of development. Differences in farms levels of development are appreciated through cluster analysis. The research includes the analysis of farms survey data. This research was carried as a part of the Academy of Sciences project “Sustainable rural development in Republic of Moldova in the context of EU accession”. In the project were surveyed 938 individual farms from nine districts across the country. As a result, we distinguish three types of farms: natural, family and market household. The cluster analysis allows to characterize the farms level development, to determine the main priority directions, and to elaborate measures for the individual farms further sustainable development.

scholarly journals Modelling nonlinear dynamics of interacting tipping elements on complex networks: the PyCascades package

2021 ◽  
Author(s):  
Nico Wunderling ◽  
Jonathan Krönke ◽  
Valentin Wohlfarth ◽  
Jan Kohler ◽  
Jobst Heitzig ◽  
...  
Keyword(s):  
Dynamical Systems ◽  
Open Source Software ◽  
Software Package ◽  
Model Systems ◽  
Stochastic Dynamical Systems ◽  
Moisture Recycling ◽  
Modelling Framework ◽  
Different Types ◽  
Open Source Software Package ◽  
The Individual

AbstractTipping elements occur in various systems such as in socio-economics, ecology and the climate system. In many cases, the individual tipping elements are not independent of each other, but they interact across scales in time and space. To model systems of interacting tipping elements, we here introduce the PyCascades open source software package for studying interacting tipping elements (10.5281/zenodo.4153102). PyCascades is an object-oriented and easily extendable package written in the programming language Python. It allows for investigating under which conditions potentially dangerous cascades can emerge between interacting dynamical systems, with a focus on tipping elements. With PyCascades it is possible to use different types of tipping elements such as double-fold and Hopf types and interactions between them. PyCascades can be applied to arbitrary complex network structures and has recently been extended to stochastic dynamical systems. This paper provides an overview of the functionality of PyCascades by introducing the basic concepts and the methodology behind it. In the end, three examples are discussed, showing three different applications of the software package. First, the moisture recycling network of the Amazon rainforest is investigated. Second, a model of interacting Earth system tipping elements is discussed. And third, the PyCascades modelling framework is applied to a global trade network.

Sign in / Sign up

Export Citation Format

Share Document