Experimental study of the adaptive gain feature for improved position-sensitive ion spectroscopy with Timepix2

2022 ◽  
Vol 17 (01) ◽  
pp. C01025
Author(s):  
B. Bergmann ◽  
P. Smolyanskiy ◽  
P. Burian ◽  
S. Pospisil
Keyword(s):  
Energy Content ◽  
High Energy ◽  
Relative Energy ◽  
Ion Spectroscopy ◽  
Spatially Resolved ◽  
Deposited Energy ◽  
Novel Method ◽  
Thickness Variations ◽  
Sigma E ◽  
Better Than

Abstract In the present work, we study the Timepix2 pixels’ high energy response in the so-called adaptive gain mode. Therefore, Timepix2 with a 500 μm thick silicon sensor was irradiated with protons of energies in the range from 400 keV to 2 MeV and α-particles of 5.5 MeV from 241Am. A novel method was developed to determine the energy deposit in single pixels of particle imprints, which are spread out over a set of neighbor pixels (cluster). We show that each pixel is capable of measuring the deposited energy from 4 keV up to ∼3.2 MeV. Reconstructing the full energy content of the clusters, we found relative energy resolutions ( σ E ) better than 2.7% and better than 4% for proton and α-particle data, respectively. In a simple experiment with a 5.5 MeV α-particle source, we demonstrate that energy losses in thin (organic) specimen can be spatially resolved, mapping out sample thickness variations, with a resolution around 1–2 μm, across the sensor area. The inherent spatial resolution of the device was determined to be 350 nm in the best case.

scholarly journals Towards the Hydrogen Economy—A Review of the Parameters That Influence the Efficiency of Alkaline Water Electrolyzers

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3193
Author(s):  
Ana L. Santos ◽  
Maria-João Cebola ◽  
Diogo M. F. Santos
Keyword(s):  
Energy Content ◽  
Water Electrolysis ◽  
High Energy ◽  
Operating Conditions ◽  
Energy Sources ◽  
Alkaline Water Electrolysis ◽  
Alkaline Water ◽  
New Energy ◽  
Recent Developments ◽  
Cell Components

Environmental issues make the quest for better and cleaner energy sources a priority. Worldwide, researchers and companies are continuously working on this matter, taking one of two approaches: either finding new energy sources or improving the efficiency of existing ones. Hydrogen is a well-known energy carrier due to its high energy content, but a somewhat elusive one for being a gas with low molecular weight. This review examines the current electrolysis processes for obtaining hydrogen, with an emphasis on alkaline water electrolysis. This process is far from being new, but research shows that there is still plenty of room for improvement. The efficiency of an electrolyzer mainly relates to the overpotential and resistances in the cell. This work shows that the path to better electrolyzer efficiency is through the optimization of the cell components and operating conditions. Following a brief introduction to the thermodynamics and kinetics of water electrolysis, the most recent developments on several parameters (e.g., electrocatalysts, electrolyte composition, separator, interelectrode distance) are highlighted.

scholarly journals Spatially Resolved Forming Mechanisms Detection in Single Point Incremental Forming Using Synchrotron Based Texture Analysis

2021 ◽  
Author(s):  
Mateus Dobecki ◽  
Alexander Poeche ◽  
Walter Reimers
Keyword(s):  
Texture Analysis ◽  
Incremental Forming ◽  
Single Point ◽  
High Energy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Forming Mechanism ◽  
Spatially Resolved ◽  
Step Down ◽  
Stress States

AbstractDespite the ongoing success of understanding the deformation states in sheets manufactured by single-point incremental forming (SPIF), the unawareness of the spatially resolved influence of the forming mechanisms on the residual stress states of incrementally formed sheet metal parts impedes their application-optimized use. In this study, a well-founded experimental proof of the occurring forming mechanisms shear, bending and stretching is presented using spatially resolved, high-energy synchrotron x-ray diffraction-based texture analysis in transmission mode. The measuring method allows even near-surface areas to be examined without any impairment of microstructural influences due to tribological reactions. The depth-resolved texture evolution for different sets of forming parameters offers insights into the forming mechanisms acting in SPIF. Therefore, the forming mechanisms are triggered explicitly by adjusting the vertical step-down increment Δz for groove, plate and truncated cone geometries. The texture analysis reveals that the process parameters and the specimen geometries used lead to characteristic changes in the crystallites’ orientation distribution in the formed parts due to plastic deformation. These forming-induced reorientations of the crystallites could be assigned to the forming mechanisms by means of defined reference states. It was found that for groove, plate and truncated cone geometries, a decreasing magnitude of step-down increments leads to a more pronounced shear deformation, which causes an increasing work hardening especially at the tool contact area of the formed parts. Larger step-down increments, on the other hand, induce a greater bending deformation. The plastic deformation by bending leads to a complex stress field that involves alternating residual tensile stresses on the tool and residual compressive stresses on the tool-averted side incrementally formed sheets. The present study demonstrates the potential of high-energy synchrotron x-ray diffraction for the spatially resolved forming mechanism research in SPIF. Controlling the residual stress states by optimizing the process parameters necessitates knowledge of the fundamental forming mechanism action.

Phase composition depth profiles using spatially resolved energy dispersive X-ray diffraction

2004 ◽  
Vol 37 (6) ◽  
pp. 967-976 ◽  
Author(s):  
Andrew C. Jupe ◽  
Stuart R. Stock ◽  
Peter L. Lee ◽  
Nikhila N. Naik ◽  
Kimberly E. Kurtis ◽  
...  
Keyword(s):  
Phase Composition ◽  
Spatial Resolution ◽  
Zinc Coating ◽  
High Energy ◽  
Sulfate Attack ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Spatially Resolved ◽  
Composition Profiles

Spatially resolved energy dispersive X-ray diffraction, using high-energy synchrotron radiation (∼35–80 keV), was used nondestructively to obtain phase composition profiles along the radii of cylindrical cement paste samples to characterize the progress of the chemical changes associated with sulfate attack on the cement. Phase distributions were acquired to depths of ∼4 mm below the specimen surface with sufficient spatial resolution to discern features less than 200 µm thick. The experimental and data analysis methods employed to obtain quantitative composition profiles are described. The spatial resolution that could be achieved is illustrated using data obtained from copper cylinders with a thin zinc coating. The measurements demonstrate that this approach is useful for nondestructively visualizing the sometimes complex transformations that take place during sulfate attack on cement-based materials. These transformations can be spatially related to microstructure as seen by computed microtomography.

Autothermal biodrying of municipal solid waste with high moisture content

2010 ◽  
Vol 64 (2) ◽  
Author(s):  
Agnieszka Zawadzka ◽  
Liliana Krzystek ◽  
Stanisław Ledakowicz
Keyword(s):  
Moisture Content ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Energy Content ◽  
Plastic Material ◽  
Initial Moisture Content ◽  
Tubular Reactor ◽  
Calorific Value ◽  
High Energy ◽  
Total Capacity

AbstractTo carry out autothermal drying processes during the composting of biomass, a horizontal tubular reactor was designed and tested. A biodrying tunnel of the total capacity of 240 dm3 was made of plastic material and insulated with polyurethane foam to prevent heat losses. Municipal solid waste and structural plant material were used as the input substrate. As a result of autothermal drying processes, moisture content decreased by 50 % of the initial moisture content of organic waste of about 800 g kg−1. In the tested cycles, high temperatures of biodried waste mass were achieved (54–56°C). An appropriate quantity of air was supplied to maintain a satisfactory level of temperature and moisture removal in the biodried mass and high energy content in the final product. The heat of combustion of dried waste and its calorific value were determined in a calorimeter. Examinations of pyrolysis and gasification of dried waste confirmed their usefulness as biofuel of satisfactory energy content.

scholarly journals PHEMTO: the polarimetric high energy modular telescope observatory

2021 ◽  
Author(s):  
P. Laurent ◽  
F. Acero ◽  
V. Beckmann ◽  
S. Brandt ◽  
F. Cangemi ◽  
...  
Keyword(s):  
Black Holes ◽  
Energy Range ◽  
High Performance ◽  
Angular Resolution ◽  
High Energy ◽  
Thermal Processes ◽  
Scientific Performance ◽  
X Ray ◽  
Measurement Capability ◽  
Better Than

AbstractBased upon dual focusing techniques, the Polarimetric High-Energy Modular Telescope Observatory (PHEMTO) is designed to have performance several orders of magnitude better than the present hard X-ray instruments, in the 1–600 keV energy range. This, together with its angular resolution of around one arcsecond, and its sensitive polarimetry measurement capability, will give PHEMTO the improvements in scientific performance needed for a mission in the 2050 era in order to study AGN, galactic black holes, neutrons stars, and supernovae. In addition, its high performance will enable the study of the non-thermal processes in galaxy clusters with an unprecedented accuracy.

Net energy efficiencies of Holstein, Jersey and Holstein-Jersey F1-crosses

2001 ◽  
Vol 72 (2) ◽  
pp. 335-342 ◽  
Author(s):  
R. Schwager-Suter ◽  
C. Stricker ◽  
D. Erdin ◽  
N. Künzi
Keyword(s):  
Body Weight ◽  
Body Condition ◽  
Fixed Effects ◽  
Energy Content ◽  
High Energy ◽  
Repeated Measurements ◽  
Low Energy ◽  
Body Tissue ◽  
Net Energy ◽  
Tissue Change

Abstract Net energy efficiencies were calculated from data of an experimental herd with respect to type of cow, lactation number, stage of lactation and diet. The trial consisted of 71 Holstein-Friesians, 71 Jerseys and 71 Holstein-Jersey F1-crosses in 1st, 2nd and > 2nd lactation. Data were collected during 210 days of lactation, from calving to week 30 and included total dry matter intake, energy content of foods, milk yield, milk solids, body weight, body condition scores and several body measurements. The cows were divided into four feeding groups : high and low energy content of roughage as well as high and low proportion of concentrates. Net energy efficiency was calculated as the ratio of milk energy to total net energy intake after subtracting energy utilized for maintenance and body tissue change. Body tissue change was calculated either via body-weight changes or body condition-score changes. Due to the distribution of the efficiencies being skewed, efficiencies were transformed applying a Box-Cox transformation. Transformed net energy efficiencies were analysed using a repeated measurements design considering the sequential nature of the observations. Mixed models with a compound symmetry structure for the variance components were applied. Final models contained the fixed effects of type, lactation number, feeding group and the covariates week of lactation and its square. Holstein-Jersey crosses were more efficient than purebreds, second lactation cows were least efficient, cows given low energy roughage and a lower proportion of concentrates were more efficient than cows on the other diets. Least efficient were the cows belonging to the high energy roughage and higher proportion of concentrates group. The coefficients of determination of the final models were between 0·357 and 0·492.

Hydrogen Generation in an Annular Micro-Reactor: an Experimental Investigation of Water Splitting Reaction Using Aluminum in Presence of Potassium Hydroxide

2018 ◽  
Vol 17 (2) ◽  
Author(s):  
Shyam P. Tekade ◽  
Diwakar Z. Shende ◽  
Kailas L. Wasewar
Keyword(s):  
Water Splitting ◽  
Potassium Hydroxide ◽  
Hydrogen Generation ◽  
Energy Content ◽  
Average Rate ◽  
High Energy ◽  
Low Flow ◽  
Flow Rates ◽  
Metal Aluminum ◽  
Micro Reactor

Abstract Hydrogen is one of the important non-conventional energy sources because of its high energy content and non-polluting nature of combustions. The water splitting reaction is one of the significant methods for hydrogen generation from non-fossil feeds. In the present paper, the hydrogen generation has been experimentally investigated with water splitting reaction using metal aluminum in presence of potassium hydroxide as an activator under flow conditions. The rate of hydrogen generation was reported in the annular micro- reactor of 1 mm annulus using various flow rates of aqueous 0.5 N KOH ranging from 1 ml/min to 10 ml/min. The complete conversion of aluminum was observed at all the flow rates of aqueous KOH. The hydrogen generation rate was observed to depend on the flow rate of liquid reactant flowing through the reactor. At 1 ml/min of 0.5 N KOH, hydrogen generates at an average rate of 3.36 ml/min which increases to 10.70 ml/min at 10 ml/min of aqueous KOH. The Shrinking Core Model was modified for predicting the controlling mechanism. The rate of hydrogen generation was observed to follow different controlling mechanisms on various time intervals at low flow rates of aqueous KOH. It was observed that chemical reaction controls the overall rate of hydrogen generation at higher flow rates of aqueous KOH.

Yields Performance of Automotive Paint Sludge via Microwave Assisted Pyrolysis

2014 ◽  
Vol 548-549 ◽  
pp. 191-195 ◽  
Author(s):  
Zakiuddin Januri ◽  
Norazah Bt Abdul Rahman ◽  
Siti Shawalliah Idris ◽  
Sharmeela Matali ◽  
Shareena Fairuz Abdul Manaf
Keyword(s):  
Energy Content ◽  
Power Level ◽  
Liquid Product ◽  
Product Yield ◽  
High Energy ◽  
Microwave Assisted ◽  
Automotive Paint ◽  
Optimum Weight ◽  
Paint Sludge

This paper reported on the product yield of automotive paint sludge via microwave assisted pyrolysis. By having an optimum weight sample loading and power level at 500g and 1000W respectively, optimum product in terms of liquid yields has been obtained. This desired liquid product comprised hydrocarbon material since it contains oil layer and almost 40% of the product can be recovered from the automotive paint sludge with an optimum microwave parameter. Furthermore, the liquid product has a potential to be used as fuel since it exhibit high energy content at 22.6 MJ/kg.

Growth Evolution of (Zn,Cd)Se Quantum Dots Deduced from Spatially Resolved Structural and Optical Characterization

1999 ◽  
Vol 571 ◽  
Author(s):  
K. Leonard ◽  
D. Hommel ◽  
A. Stockmann ◽  
H. Selke ◽  
J. Seufert ◽  
...  
Keyword(s):  
Quantum Dots ◽  
Quantum Wells ◽  
Three Dimensional ◽  
High Energy ◽  
Growth Direction ◽  
Growth Mode ◽  
Gradual Transition ◽  
Mode Transition ◽  
Spatially Resolved ◽  
Composition Fluctuations

ABSTRACTThe growth mode of CdSe layers grown by migration enhanced epitaxy between ZnSe barriers has been investigated. In situ reflection high-energy electron diffraction shows a gradual transition to a three-dimensional growth mode which, however, is not accompanied by a change of the surface lattice constant. High-resolution transmission electron micrographs reveal a strong Cd diffusion, leading to ternary ZnCdSe quantum wells. Furthermore. composition fluctuations perpendicular to the growth direction on a nanometer scale are found already prior to the beginning of the growth mode transition. In the case of heterostructures containing a CdSe layer that has undergone the growth mode transition, micrographs show Cd-rich quantum dots with diameters of around 8 nm and heights of around 1.5 nm within a ternary quantum well. By spatially resolved photoluminescence the emission from single quantum dots could be observed. The polarization dependence of the emission from single dots indicates an asymmetric shape of the dots with certain preferential orientations along the [110] and [110] directions.

Sign in / Sign up

Export Citation Format

Share Document