scholarly journals Processing technology and electrical decontamination of bedding manure and litter in ground trenches and bioreactors

2021 ◽  
Vol 845 (1) ◽  
pp. 012155
Author(s):  
D V Guryanov ◽  
V D Khmyrov ◽  
Yu V Guryanova ◽  
B S Trufanov ◽  
V B Kudenko

Abstract The paper presents data on the effect of electric current on the quantitative index of Mucor and Bacillus fungal colonies in bedding litter. It was found that with an increase in direct current to 3A, the quantitative index (%) of Mucor fungal colonies sharply decreases from 45 to 3 (by 42%), and the quantitative index (%) of Bacillus fungal colonies decreases from 70 to 50 (by 20%). Fresh litter has high acidity, and it cannot be used without preliminary processing and electrical decontamination in ground trenches and bioreactors.

1956 ◽  
Vol 11 (1) ◽  
pp. 71-75
Author(s):  
E. Haeffner ◽  
Th. Sjöborg ◽  
S. Lindhe

The isotope separation effect of a direct electric current in a liquid metal is demonstrated by passing a current through mercury, which is enclosed in a capillary tube. The second part of the paper deals with an attempt of establishing an isotope effect when a direct current is passed through an uranium wire.


Author(s):  
Khashayar Teimoori ◽  
Ali M. Sadegh ◽  
Bhaskar Paneri

Abstract The brain is encased in the skull and suspended and supported by a series of three fibrous tissue layers: Dura mater, Arachnoid and Pia matter, known as the Meninges. Arachnoid trabeculae are strands of collagen tissues located in a space between the arachnoid and the pia matter known as the subarachnoid space (SAS). The SAS trabeculae play an important role in damping and reducing the relative movement of the brain with respect to the skull. The SAS is filled with cerebrospinal fluid (CSF), which is a colorless fluid that surrounds all over the brain inside the subarachnoid spaces. This fluid stabilizes the shape and position of the brain during head movements. To address normal and pathological SAS functions, under conditions where an electrical stimulation is applied, this study proposes a novel fully-coupled electro-Fluid-Structure Interaction (eFSI) modeling approach to investigate the response of the system of SAS-CSF under the applied electric current, which is provided by the transcranial Direct Current Stimulation (tDCS) technique according to the following steps. First, a two-dimensional channel model of the brain SAS with several trabecular morphologies is numerically simulated using the finite element (FE) method. The channel model is then subjected to a specific electric field intensity by applying a 1∼2mA direct current. COMSOL Multiphysics v. 5.3a software is used to perform the coupled eFSI numerical simulation in order to investigate the effects of the applied electric field on the flow of the CSF, thereby showing the deflection of the trabeculae inside the channel model. The results of this study demonstrate that the induced electric field causes less deflection of the trabeculae by exacerbating the velocity profile of the cerebrospinal fluid flow and decreasing the flow pressure applied on each trabecula inside the trabecular SAS channel. This electro-mechanostructural modeling approach is significant because of the applied current on the channel walls that can directly affect the CSF flow. In fact, the results of this study can open up a new horizon for future research on disorders like hydrocephalus, which involves an unusual production rate of the CSF inside the brain. This disorder may be controlled by applying an electric current in the brain, using one of the available brain stimulation techniques, i.e. tDCS. By using an electrical stimulation technique, one might control the dynamics of brain function and, therefore, regulate dysfunctionality through the first eFSI multiphysics modeling approach proposed in this study. Briefly, the brain SAS may be considered as a novel region for electrotherapeutic and electromechanical neuromodulation.


2010 ◽  
Vol 32 (2) ◽  
pp. 120-130 ◽  
Author(s):  
Rolando Placeres Jiménez ◽  
Ana Elisa Bergues Pupo ◽  
Jesús Manuel Bergues Cabrales ◽  
Javier Antonio González Joa ◽  
Luis Enrique Bergues Cabrales ◽  
...  

2021 ◽  
Vol 13 ◽  
Author(s):  
Kilian Abellaneda-Pérez ◽  
Lídia Vaqué-Alcázar ◽  
Ruben Perellón-Alfonso ◽  
Cristina Solé-Padullés ◽  
Núria Bargalló ◽  
...  

Combining non-invasive brain stimulation (NIBS) with resting-state functional magnetic resonance imaging (rs-fMRI) is a promising approach to characterize and potentially optimize the brain networks subtending cognition that changes as a function of age. However, whether multifocal NIBS approaches are able to modulate rs-fMRI brain dynamics in aged populations, and if these NIBS-induced changes are consistent with the simulated electric current distribution on the brain remains largely unknown. In the present investigation, thirty-one cognitively healthy older adults underwent two different multifocal real transcranial direct current stimulation (tDCS) conditions (C1 and C2) and a sham condition in a crossover design during a rs-fMRI acquisition. The real tDCS conditions were designed to electrically induce two distinct complex neural patterns, either targeting generalized frontoparietal cortical overactivity (C1) or a detachment between the frontal areas and the posteromedial cortex (C2). Data revealed that the two tDCS conditions modulated rs-fMRI differently. C1 increased the coactivation of multiple functional couplings as compared to sham, while a smaller number of connections increased in C1 as compared to C2. At the group level, C1-induced changes were topographically consistent with the calculated electric current density distribution. At the individual level, the extent of tDCS-induced rs-fMRI modulation in C1 was related with the magnitude of the simulated electric current density estimates. These results highlight that multifocal tDCS procedures can effectively change rs-fMRI neural functioning in advancing age, being the induced modulation consistent with the spatial distribution of the simulated electric current on the brain. Moreover, our data supports that individually tailoring NIBS-based interventions grounded on subject-specific structural data might be crucial to increase tDCS potential in future studies amongst older adults.


2013 ◽  
Vol 401-403 ◽  
pp. 643-646
Author(s):  
Ji Bo Hou ◽  
Xiong Fang Deng ◽  
Ru Na Tian ◽  
Jian Bin Hou

The effects of electric current, the altitude of the liquid outlet and liquid level change within crucible in direct-current electromagnetic pump (EMP) used to quantitative pouring of aluminum alloy on flow rate were studied. The results show that the effects of electric current on flow rate is affected by the hydraulic resistance; flow rate decrease with the increasing of the altitude of liquid outlet; when the output of aluminum alloy is large, the liquid level change within crucible have a significant impact on flow rate.


2010 ◽  
Vol 163 ◽  
pp. 141-144 ◽  
Author(s):  
Adam Bunsch ◽  
S.J. Skrzypek ◽  
J. Kowalska ◽  
Wiktoria Ratuszek ◽  
W. Rakowski

Influence of the electrodepositing parameters e.g. applied electric current as variable on texture formation and on mechanical properties of copper thin films was studied. Experiment was done for copper deposition from sulphate bath under galvanostatic and pulse current. It was found that copper layers exhibits different texture depending on applied current conditions during electrodepositing process. Pulse and direct current conditions leads to different texture of electrodeposited copper. Texture of electrodeposited copper coatings and mechanical properties could be correlated. It was found that, texture indexes although are not complex information about texture could be used for analysis of such correlation in technological process.


2009 ◽  
Vol 620-622 ◽  
pp. 101-104 ◽  
Author(s):  
Khanh Quoc Dang ◽  
Makoto Nanko ◽  
Masakazu Kawahara ◽  
Shinichi Takei

Densification and sample temperature of alumina (Al2O3) powder during pulsed electric current sintering with different pulse power generators, inverter type and pulsed direct current type were investigated. The sample temperature for inverter generator was higher than that for pulsed direct current generator in same die temperature ranging form 800 to 1400oC. The relative density increased with increasing of the sample temperature.


2021 ◽  
Author(s):  
Yu Kawamata ◽  
Kyohei Hayashi ◽  
Ethan Carlson ◽  
Shobin Shaji ◽  
Dirk Waldmann ◽  
...  

<div><div><div><p>Challenges in the selective manipulation of functional groups (chemoselectivity) in organic synthesis have historically been overcome using either reagents/catalysts that tunably interact with a substrate or through modification to shield undesired sites of reactivity (protecting groups). Although electrochemistry offers precise redox control to achieve unique chemoselectivity, this approach often becomes challenging in the presence of multiple redox-active functionalities. Historically, electrosynthesis has been performed almost solely by using direct current (DC). In contrast, utilization of alternating current (AC) has been considered as an option to improve reaction efficiency rather than a way to achieve distinctly different reaction outcomes. Here we show how a unique type of waveform employed to deliver electric current – rapid alternating polarity (rAP) – enables control over reaction outcomes in the chemoselective reduction of carbonyl compounds, one of the most widely used reaction manifolds. The reactivity observed cannot be recapitulated using DC electrolysis or chemical reagents. The synthetic value brought by this new method for controlling chemoselectivity is vividly demonstrated in the context of classical reactivity problems such as chiral auxiliary removal and cutting-edge medicinal chemistry topics such as the synthesis of PROTACs.</p></div></div></div>


1995 ◽  
Vol 60 (10) ◽  
pp. 1728-1732
Author(s):  
Vlastimil Kůdela ◽  
Jan Lokaj

Homogeneous membranes were prepared by casting chloroform solutions of methyl methacrylate-N-[2-methyl-5-(dimethylamino)phenyl]maleimide copolymers containing 2.3-8.7 mole % of the imide. After quaternization with methyl iodide, diffusive permeabilities and electric resistances (both with alternating and direct current) of the membranes were determined. During the passage of electric current a substantial decrease (2-10 fold) in the membrane resistance was observed; the lower the imide content was, the greater was the effect. The decrease suggests structural changes in the membranes due to electrohydrodynamic convection of unstable polymer chains caused by electric force. Significant correlations between the imide content and the resistance, both before and after the treatment with electric current, were found. According to oriented concentration potentials, the internal symmetry of the membranes was also affected by electric current.


Sign in / Sign up

Export Citation Format

Share Document