Basic Body Plan General Overview

2004 ◽  
Author(s):  
Eliot Goldfinger
Keyword(s):  
Lower Limb ◽  
Three Dimensional ◽  
Lumbar Vertebrae ◽  
Body Plan ◽  
The Body ◽  
Upper Arm ◽  
Rib Cage ◽  
General Overview ◽  
Triceps Muscle ◽  
Basic Body

There is a basic body plan common to most of the animals presented in this book. At its most obvious, they all have a head, a body, and four limbs. Most are four-legged and stand on all fours, and are described as having front limbs and rear limbs. The front limb is anatomically equivalent to the arm and hand in humans and primates, and the rear limb to the human lower limb. The animals in this book are surprisingly similar in many ways. The head is connected to the rib cage by the neck vertebrae and the rib cage is connected to the pelvis by the lumbar vertebrae. The two front limbs are connected to the rib cage, and the two rear limbs are connected to the pelvis. These units move in relation to one another, establishing the stance, or pose, of an animal. Animals differ primarily in the shape and relative proportions of these structural units, in the position of the wrist, heel, and toe bones when standing and walking, and by the number of their toes. An animal can be visualized as being constructed of a series of simplified, three-dimensional, somewhat geometric volumes (head, forearm, thigh). Each of these volumes has one dimension that is longer than the others. A line projected through the center of the mass of this volume on its longest dimension is called its axis (plural, axes). For the most part, especially in the limbs, these axes follow the skeleton, so that a line drawn through the long dimension of a bone is on, or close to, the axis of the volume of that region (for example, the position of the radius is close to the axis of the forearm). One of the more confusing regions of the body is the volume of the upper arm. The humerus (upper arm bone) is mostly deeply buried in muscle, and lies toward the front of this muscle mass, with the massive triceps muscle located at its rear.

scholarly journals Petiole-Lamina Transition Zone: A Functionally Crucial but Often Overlooked Leaf Trait

Plants ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 774
Author(s):  
Max Langer ◽  
Thomas Speck ◽  
Olga Speck
Keyword(s):  
Transition Zone ◽  
Three Dimensional ◽  
Spatial Arrangement ◽  
Body Plan ◽  
The Body ◽  
Vascular Bundles ◽  
Cross Sectional ◽  
Thin Sections ◽  
Transition Zones ◽  
The Cross

Although both the petiole and lamina of foliage leaves have been thoroughly studied, the transition zone between them has often been overlooked. We aimed to identify objectively measurable morphological and anatomical criteria for a generally valid definition of the petiole–lamina transition zone by comparing foliage leaves with various body plans (monocotyledons vs. dicotyledons) and spatial arrangements of petiole and lamina (two-dimensional vs. three-dimensional configurations). Cross-sectional geometry and tissue arrangement of petioles and transition zones were investigated via serial thin-sections and µCT. The changes in the cross-sectional geometries from the petiole to the transition zone and the course of the vascular bundles in the transition zone apparently depend on the spatial arrangement, while the arrangement of the vascular bundles in the petioles depends on the body plan. We found an exponential acropetal increase in the cross-sectional area and axial and polar second moments of area to be the defining characteristic of all transition zones studied, regardless of body plan or spatial arrangement. In conclusion, a variety of terms is used in the literature for describing the region between petiole and lamina. We prefer the term “petiole–lamina transition zone” to underline its three-dimensional nature and the integration of multiple gradients of geometry, shape, and size.

Three-dimensional modelling of wheelchair contrived with lower limb exoskeleton for right hemiplegic dysfunction

2020 ◽  
Vol 234 (7) ◽  
pp. 651-659
Author(s):  
AN Nithyaa ◽  
S Poonguzhali ◽  
N Vigneshwari
Keyword(s):  
Lower Limb ◽  
Computer Aided Design ◽  
Age Groups ◽  
Three Dimensional ◽  
The Body ◽  
Three Dimensional Model ◽  
Design Quality ◽  
Lower Limb Exoskeleton ◽  
Repeated Exercise ◽  
Aided Design

Hemiplegia is a type of paralysis that affects one side of the body due to stroke, characterizing severe weakness or rigid movement. Many people of different age groups are affected by this condition which cannot be completely cured but can be minimized through proper physiotherapy. A continuous and repeated exercise has to be given to the hemiplegic subjects to regain their motor function. To serve this purpose, a three-dimensional model of wheelchair contrived with lower limb exoskeleton is designed and motion analysis is done using SolidWorks. This virtual model of the object is created with the assistance of computer-aided design software. Professionals can be able to do the experiment on what-if scenarios with their three-dimensional designs, which helps to validate their devices and identify any snags with design quality. The pattern of behaviour of lower limb exoskeleton is predicted using SimMechanics in MATLAB.

scholarly journals Kinematic gait analysis of a young man after amputation of the toes

2014 ◽  
Vol 6 (1) ◽  
Author(s):  
Wanda Forczek ◽  
Tadeusz Ruchlewicz ◽  
Anna Gawęda
Keyword(s):  
Lower Limb ◽  
Fear Of Falling ◽  
Sagittal Plane ◽  
Body Height ◽  
Three Dimensional ◽  
The Body ◽  
Mean Values ◽  
Stable Conditions ◽  
Partial Amputation ◽  
The Subject

Summary Study aim: the foot is recognised as a “functional unit” with two important aims: to support body weight and to serve as a lever to propel the body forward. When it is impaired, the locomotor pattern has to adapt to compensate for the dysfunction. The purpose of this study was to investigate gait kinematics of a man after bilateral partial amputation of the toes. Material and methods: the subject of the study was a young man aged 30 years (body height and mass: 186 cm, 82 kg) who suffered a frostbite injury in the feet while climbing in the severe mountain conditions. After a few months of treatment, the necessary amputation occurred. Three-dimensional lower limb kinematics was collected from motion capture system (Vicon 250) and Golem marker set-up using 5 video-based cameras with infrared strobes. The subject performed over-ground walking at self-selected speed, first barefoot, then wearing athletic shoes. Results: the patient’s results are the mean values of sixteen full gait cycles. The spatiotemporal parameters were lower during gait without shoes. In terms of the angular changes of the lower limb joints in sagittal plane, the analysis revealed similar functional patterns and typical trends in both recorded conditions. The differences, however, occurred in their amplitude. A larger range of motion was generally noted in shod conditions. The higher the joint was, the smaller the differences were. Conclusion: changes in gait due to the forefoot dysfunction may be stabilizing adaptations related to fear of falling. Footwear provided more stable conditions.

Approaches for Understanding Dynamic Cell Movements, Cell-Cell Interactions and Tissue Shaping During Embryogenesis of the Vertebrate Body Plan

1999 ◽  
Vol 5 (S2) ◽  
pp. 1078-1079
Author(s):  
G.C. Schoenwolf
Keyword(s):  
Descriptive Analysis ◽  
Molecular Genetic ◽  
Three Dimensional ◽  
Body Plan ◽  
The Body ◽  
Cell Interactions ◽  
Cell Movements ◽  
Dynamic Cell ◽  
Specialized Region ◽  
Cell Cell

The early vertebrate embryo develops a characteristic tube-within-a-tube body plan. This plan is realized through a series of cell movements and cell-cell interactions that collectively result in tissue shaping and the formation of the three-dimensional body plan. Tissue shaping is a highly choreographed process that is under the control of the organizer--a specialized region of the embryo that is both sufficient and required for formation of the body plan. Recent technical advances have greatly increased our understanding of the role of the organizer in vertebrate embryogenesis. Such advances include the use of new cellular, molecular, genetic, and embryological approaches.A hallmark of embryogenesis is its dynamic nature. Classically, embryos were studied in three major ways. 1) With morphological/descriptive analysis, initially involving histological procedures (stained whole mounts and serial sections cut in the three cardinal axes) and more recently electron microscopy.

Scanning electron microscopy of freeze-fractured prescapular lymph node of caprine

1984 ◽  
Vol 42 ◽  
pp. 244-245
Author(s):  
O. Faroon ◽  
F. Al-Bagdadi ◽  
T. G. Snider ◽  
C. Titkemeyer
Keyword(s):  
Lymph Node ◽  
Lymph Nodes ◽  
Lymphatic System ◽  
Three Dimensional ◽  
Meat Products ◽  
The Body ◽  
Morphological Data ◽  
The World ◽  
Cellular Constituent ◽  
Scanning Electron

The lymphatic system is very important in the immunological activities of the body. Clinicians confirm the diagnosis of infectious diseases by palpating the involved cutaneous lymph node for changes in size, heat, and consistency. Clinical pathologists diagnose systemic diseases through biopsies of superficial lymph nodes. In many parts of the world the goat is considered as an important source of milk and meat products.The lymphatic system has been studied extensively. These studies lack precise information on the natural morphology of the lymph nodes and their vascular and cellular constituent. This is due to using improper technique for such studies. A few studies used the SEM, conducted by cutting the lymph node with a blade. The morphological data collected by this method are artificial and do not reflect the normal three dimensional surface of the examined area of the lymph node. SEM has been used to study the lymph vessels and lymph nodes of different animals. No information on the cutaneous lymph nodes of the goat has ever been collected using the scanning electron microscope.

Study on Pramana Shareera in relation to Prakriti

2016 ◽  
Vol 2 (3) ◽  
Author(s):  
Rajendra Pai N. ◽  
U. Govindaraju
Keyword(s):  
Observational Study ◽  
Upper Limb ◽  
Lower Limb ◽  
Characteristic Property ◽  
The Body ◽  
Artificial Limbs ◽  
Body Parts ◽  
Unit Of Measurement ◽  
The Individual ◽  
Different Parts

Ayurveda in its principle has given importance to individualistic approach rather than generalize. Application of this examination can be clearly seem like even though two patients suffering from same disease, the treatment modality may change depending upon the results of Dashvidha Pariksha. Prakruti and Pramana both used in Dashvidha Pariksha. Both determine the health of the individual and Bala (strength) of Rogi (Patient). Ayurveda followed Swa-angula Pramana as the unit of measurement for measuring the different parts of the body which is prime step assessing patient before treatment. Sushruta and Charaka had stated different Angula Pramana of each Pratyanga (body parts). Specificity is the characteristic property of Swa-angula Pramana. This can be applicable in present era for example artificial limbs. A scientific research includes collection, compilation, analysis and lastly scrutiny of entire findings to arrive at a conclusion. Study of Pramana and its relation with Prakruti was conducted in 1000 volunteers using Prakruti Parkishan proforma with an objective of evaluation of Anguli Pramana in various Prakriti. It was observed co-relating Pramana in each Prakruti and Granthokta Pramana that there is no vast difference in measurement of head, upper limb and lower limb. The observational study shows closer relation of features with classical texts.

scholarly journals Expression patterns of signalling molecules and transcription factors in the early rabbit embryo and their significance for modelling amniote axis formation

2021 ◽  
Author(s):  
Ruben Plöger ◽  
Christoph Viebahn
Keyword(s):  
Transcription Factors ◽  
Expression Patterns ◽  
In Situ Hybridisation ◽  
Body Plan ◽  
The Body ◽  
Anchor Point ◽  
Axis Formation ◽  
Point Model ◽  
Signalling Molecules ◽  
Rabbit Embryo

AbstractThe anterior-posterior axis is a central element of the body plan and, during amniote gastrulation, forms through several transient domains with specific morphogenetic activities. In the chick, experimentally proven activity of signalling molecules and transcription factors lead to the concept of a ‘global positioning system’ for initial axis formation whereas in the (mammotypical) rabbit embryo, a series of morphological or molecular domains are part of a putative ‘three-anchor-point model’. Because circular expression patterns of genes involved in axis formation exist in both amniote groups prior to, and during, gastrulation and may thus be suited to reconcile these models, the expression patterns of selected genes known in the chick, namely the ones coding for the transcription factors eomes and tbx6, the signalling molecule wnt3 and the wnt inhibitor pkdcc, were analysed in the rabbit embryonic disc using in situ hybridisation and placing emphasis on their germ layer location. Peripheral wnt3 and eomes expression in all layers is found initially to be complementary to central pkdcc expression in the hypoblast during early axis formation. Pkdcc then appears — together with a posterior-anterior gradient in wnt3 and eomes domains — in the epiblast posteriorly before the emerging primitive streak is marked by pkdcc and tbx6 at its anterior and posterior extremities, respectively. Conserved circular expression patterns deduced from some of this data may point to shared mechanisms in amniote axis formation while the reshaping of localised gene expression patterns is discussed as part of the ‘three-anchor-point model’ for establishing the mammalian body plan.

Clinical Utility of an Exoskeleton Robot Using 3-Dimensional Scanner Modeling in Burn Patient: A Case Report

2021 ◽  
Author(s):  
So Young Joo ◽  
Seung Yeol Lee ◽  
Yoon Soo Cho ◽  
Sangho Yi ◽  
Cheong Hoon Seo
Keyword(s):  
Burn Injury ◽  
Hand Function ◽  
Three Dimensional ◽  
The Body ◽  
3D Technology ◽  
Early Management ◽  
3 Dimensional ◽  
Exoskeleton Robot ◽  
Physical Abilities ◽  
Upper Limb Dysfunction

Abstract Hands are the part of the body that are most commonly involved in burns, and the main complications are finger joint contractures and nerve injuries. Hypertrophic scarring cannot be avoided despite early management of acute hand burn injuries, and some patients may need application of an exoskeleton robot to restore hand function. To do this, it is essential to individualize the customization of the robot for each patient. Three-dimensional (3D) technology, which is widely used in the field of implants, anatomical models, and tissue fabrication, makes this goal achievable. Therefore, this report is a study on the usefulness of an exoskeleton robot using 3D technology for patients who lost bilateral hand function due to burn injury. Our subject was a 45-year-old man with upper limb dysfunction of 560 days after a flame and chemical burn injury, with resultant impairment of manual physical abilities. After wearing an exoskeleton robot made using 3D printing technology, he could handle objects effectively and satisfactorily. This innovative approach provided considerable advantages in terms of customization of size and reduction in manufacturing time and costs, thereby showing great potential for use in patients with hand dysfunction after burn injury.

scholarly journals Virtual Archaeology of Death and Burial: A Procedure for Integrating 3D Visualization and Analysis in Archaeothanatology

2021 ◽  
Vol 7 (1) ◽  
pp. 540-555
Author(s):  
Hayley L. Mickleburgh ◽  
Liv Nilsson Stutz ◽  
Harry Fokkens
Keyword(s):  
Spatial Information ◽  
3D Visualization ◽  
Rapid Development ◽  
Three Dimensional ◽  
3D Models ◽  
The Body ◽  
Test Case ◽  
Archaeology Of Death ◽  
Human Burials ◽  
3D Information

Abstract The reconstruction of past mortuary rituals and practices increasingly incorporates analysis of the taphonomic history of the grave and buried body, using the framework provided by archaeothanatology. Archaeothanatological analysis relies on interpretation of the three-dimensional (3D) relationship of bones within the grave and traditionally depends on elaborate written descriptions and two-dimensional (2D) images of the remains during excavation to capture this spatial information. With the rapid development of inexpensive 3D tools, digital replicas (3D models) are now commonly available to preserve 3D information on human burials during excavation. A procedure developed using a test case to enhance archaeothanatological analysis and improve post-excavation analysis of human burials is described. Beyond preservation of static spatial information, 3D visualization techniques can be used in archaeothanatology to reconstruct the spatial displacement of bones over time, from deposition of the body to excavation of the skeletonized remains. The purpose of the procedure is to produce 3D simulations to visualize and test archaeothanatological hypotheses, thereby augmenting traditional archaeothanatological analysis. We illustrate our approach with the reconstruction of mortuary practices and burial taphonomy of a Bell Beaker burial from the site of Oostwoud-Tuithoorn, West-Frisia, the Netherlands. This case study was selected as the test case because of its relatively complete context information. The test case shows the potential for application of the procedure to older 2D field documentation, even when the amount and detail of documentation is less than ideal.

Sign in / Sign up

Export Citation Format

Share Document