scholarly journals Inductively coupled low resistance circuits

1. When two electrical circuits each possessing capacitance and inductance are placed in the neighbourhood of each other, so that some of the lines of magnetic induction due to one pass through the other, that is, the circuits have a mutual inductance or are "coupled", the frequencies of the electrical oscillations which can take place in each of the circuits differ from those possible in the circuits apart, and there is in general a periodic movement of some of the energy of the oscillations from one circuit to the other and back again. These effects are referred to in nearly all text-books on wireless telegraphy. When the resistance of each circuit is sufficient to cause appreciable damping of the oscillations the treatment of the problem of the two circuits is somewhat complicated and is seldom given. Without damping, the calculations are simpler, but the final results for the frequencies and amplitudes have not, it appears to me, been given in as simple a form as they are capable of taking.

2017 ◽  
Vol 1 (2) ◽  
pp. 11-21
Author(s):  
Adnan Adnan

Sufism as a spiritual life was frequently to be a return place for the tired man because of his life journey and an escape place for the pressed man. Beside that, actually sufism can strengthen the week individuals missing his self-existance. By sufism, they found the real meaning of life. In the teachings of sufi order, the seeker (salik) has to pass through spiritual path (thariqah) in order to know Allah as the Final Goal by passing a long journey and spiritual stations (maqamat) to improve their bad characteristics. This is significant to do for salikin, especially to make his inner empty, and then adorn and decorate it with all of good characteristics to reach higher and higher stations (maqamat). In the other hand, they found a religious-psycological experiences which is called ahwal to achive the spiritual experiences with Divine Reality (Haqiqah).


2021 ◽  
Vol 263 (3) ◽  
pp. 3097-3107
Author(s):  
Shahin Sohrabi ◽  
Peter Svensson ◽  
Teresa Pàmies Gómez ◽  
Jordi Romeu Garbi

Over the last decades, the applications of the active noise control system are broadened. In this study, the active noise control is modeled to reduce the noise pass through an open window. The objective is to define a suitable location for the control sources and error microphones to achieve more noise level reduction at the other side of the window. The performances of the active noise control system are calculated for two different arrangements: (1) the control sources on the edge of the opening and (2) the control sources distributed on the surface of the window. Furthermore, two cost functions are considered to model the noise control system including the minimization of the total squared pressure at cancellation points and the minimization of sound intensity at the surface of the aperture.


2019 ◽  
Vol 53 (5) ◽  
pp. 567-575
Author(s):  
Luma Fabiane Almeida ◽  
Lina María Marín ◽  
Esperanza Angeles Martínez-Mier ◽  
Jaime Aparecido Cury

We evaluated if the low resistance of fluorotic enamel to demineralization could be overcome by fluoride dentifrice (FD) treatment. Paired enamel slabs of sound and fluorotic enamel (n = 20/group) from human teeth presenting Thylstrup and Fejerskov index (TF) scores from 0 to 4 were obtained. Half of the anatomic surface of the enamel slabs was isolated and used as a control (baseline) regarding enamel mineralization and fluoride concentration. The slabs were submitted to a pH-cycling model simulating a high cariogenic challenge, and 2×/day they were treated with placebo dentifrice (PD) or FD (1,100 µg F/g, as NaF). After 10 days, the slabs were cut into two halves. Enamel demineralization was evaluated by cross-sectional microhardness in one half, and the fluoride formed (FF) concentration was determined in the other half. For statistical analysis, the data on net demineralization area (ΔΔS) and FF (µg F/g) were grouped into TF0, TF1–2, and TF3–4, and analyzed by two-way ANOVA followed by Tukey’s test (α = 5%). The factors studied were TF (0, 1–2, and 3–4) and dentifrice treatment (PD or FD). The effect of the factors was statistically significant for ΔΔS and FF (p < 0.05). In the PD group, the following pattern for ΔΔS was observed: TF3–4 > TF1–2 > TF0 (p < 0.05); however, the groups did not differ (p > 0.05) when FD was used. Regarding FF, the groups treated with PD did not differ (p > 0.05), but the greatest (p < 0.05) FF concentration was found in group TF3–4 treated with FD. These findings suggest that the higher susceptibility of fluorotic enamel to demineralization lesions is decreased by the use of FD.


2010 ◽  
Vol 56 (No. 5) ◽  
pp. 244-251 ◽  
Author(s):  
K. Agyarko ◽  
E. Darteh ◽  
B. Berlinger

Concentrations of Cd, Hg, Pb, Cr, Fe, Co, Ni, Cu, Zn, Mo and As were determined in soils and leaves of plants from refuse dumpsites and background soils in two cities, a municipality and a rural community in Ghana, using a ThermoFinnigan Element 2 high resolution inductively coupled plasma mass spectrometric (HR-ICP-MS) instrument. The refuse dump soils were classified between 'Uncontaminated to Moderate' and 'Strongly Contaminated'. Pollution levels for Cd (Igeo = 2.06&ndash;2.40) and Zn (Igeo = 2.95&ndash;3.36) were higher than of the other metals. The refuse dump soil from the rural community was the least polluted with the metals. Fe and Ni loads in plants from the refuse dump soils in the cities and the municipality were beyond the normal ranges of 40&ndash;500 &micro;g/g (Fe) and 0.02&ndash;5.00 &micro;g/g (Ni). Transfer ratios for Cd, Hg, Cu, Zn and Pb and Fe of plants from the background soils were higher than those from the refuse dump soils, which might be due to the higher levels of organic matter, pH, phosphate, Ca and Mg in the refuse dump soils.


1965 ◽  
Vol 208 (6) ◽  
pp. 1286-1290 ◽  
Author(s):  
M. B. Nikitovitch-Winer ◽  
A. H. Pribble ◽  
A. D. Winer

A method has been devised for the partial purification of luteinizing hormone-releasing factor (LHRF) from extracts of ovine median-eminence tissue. Acid extracts are boiled for 20 min, dialyzed against water for 12 hr, and the dialysate lyophilized. The lyophilized residue is dissolved in a small volume of 5 x 10–3 m ammonium acetate, pH 4.6, and chromatographed on carboxymethylcellulose with an ammonium acetate gradient to 1.0 m, pH 4.6. Several acidic peptides pass through the column rapidly; a peptide with LHRF activity appears in the effluent at about 0.4 m ammonium acetate. The ability of various fractions to induce ovulation on intrapituitary infusion into "atropine-pentobarbital-blocked" proestrous rats was used as the biological test for the release of LH. It was found that, following the infusion of the LHRF-containing fraction, 42 of 54 animals ovulated, while no ovulation was observed in 64 animals treated with any of the other fractions. The LHRF material is probably a small polypeptide which is dialyzable, heat stable, has little absorbancy at either 260 or 280 mµ, and does not give a positive reaction with ninhydrin after paper chromatography in the solvent system used. Evidence is presented that the partially purified LHRF is devoid of LH contamination.


1832 ◽  
Vol 122 ◽  
pp. 195-228 ◽  

The perturbations of the planets is the subject of reiterated researches by all the great geometers who have raised up Physical Astronomy to its present elevation. They have been successful in determining the variations which the elements of the orbit of a disturbed planet undergo; and in expressing these variations analytically, in the manner best adapted for computation. But the inquirer who turns his attention to this branch of study will find that it is made to depend upon a theory in mechanics, which is one of considerable analytical intricacy, known by the name of the Variation of the Arbitrary Constants. Considerations similar to those employed in this theory were found necessary in Physical Astronomy from its origin; but the genius of Lagrange imagined and completed the analytical processes of general application. In a dynamical problem which is capable of an exact solution, such as a planet revolving by the central attraction of the sun, the formulas constructed by Lagrange enable us to ascertain the alterations that will be induced on the original motions of the body, if we suppose it urged by new and very small forces, such as the irregular attractions of the other bodies of the planetary system. General views of this nature are very valuable, and contribute greatly to the advancement of science. But their application is sometimes attended with inconvenience. In particular cases, the general structure of the formulas may require a long train of calculation, in order to extricate the values of the quantities sought. It may be necessary for attaining this end to pass through many differential equations, and to submit to much subordinate calculation. The remedy for this inconvenience seems to lie in separating the general principles from the analytical processes by which they are carried into effect. In some important problems, a great advantage, both in brevity and clearness, will be obtained by adapting the investigation to the particular circumstance of the case, and attending solely to the principles of the method in deducing the solution. It may therefore become a question whether it be not possible to simplify physical astronomy by calling in the aid only of the usual principles of dynamics, and by setting aside every formula or equation not absolutely necessary for arriving at the final results. The utility of such an attempt, if successful, can hardly be doubted. By rendering more accessible a subject of great interest and importance, the study of English mathematicians may be recalled to a theory which, although it originated in England, has not received the attention it deserves, and which it has met with in foreign countries. The paper which I have the honour to submit to the Royal Society, contains a complete determination of the variable elements of the elliptic orbit of a disturbed planet, deduced from three differential equations that follow readily from the mechanical conditions of the problem. In applying these equations, the procedure is the same whether a planet is urged by the sole action of the central force of the sun, or is besides disturbed by the attraction of other bodies revolving about that luminary; the only difference being that, in the first case, the elements of the orbit are all constant, whereas in the other case they are all variable. The success of the method here followed is derived from a new differential equation between the time and the area described by the planet in its momentary plane, which greatly shortens the investigation by making it unnecessary to consider the projection of the orbit. But the solution in this paper, although no reference is made to the analytical formulas of the theory of the variation of the arbitrary constants, is no less an application of that method, and an example of its utility and of the necessity of employing it in very complicated problems.


1. Introductory .—Recently at the National Physical Laboratory we have constructed a standard of mutual inductance of novel type, whose value has been accurately calculated from the dimensions. This inductance has formed the basis for the determination of the unit of resistance in absolute measure by two different methods, in both of which alternating current is employed. Although there is no doubt that the accuracy attainable by these methods could be increased by greater elaboration of the apparatus used, the results already obtained seem to be of sufficient interest to warrant publication. It should be mentioned that the accuracy here aimed at was of a considerably lower order than that contemplated in the determination of the ohm by the Lorenz apparatus which is at present being carried out in the laboratory. For the experiments here described, no apparatus was specially constructed, but use was made of instruments which had already been designed and set up for the measurement of inductance and capacity. I shall first give a brief description of the standard inductance and then pass on to the methods and results. 2. Standard Mutual Inductance .—The design of the mutual inductance has already been described. The electrical circuits have the form and arrange­ment shown in section in fig. 1.


2014 ◽  
Vol 46 (2) ◽  
pp. 73-76
Author(s):  
B. Kim Barnes

Purpose – The purpose of this paper is to help readers consider the value of identifying the values, beliefs, and vested interests of someone they wish to influence and to frame their idea, request, or call to action in a way that will make sense in the other person's internal model of the world and be interesting and attractive to him or her. Design/methodology/approach – The paper defines several key terms and presents a rationale for exploring the point of view of individuals one wishes to influence and framing an idea in a way that will be most meaningful to the other. Findings – There is no one way to view any idea. People have a set of mental filters that any influence attempt must pass through. These filters shape the impact and meaning of the other person's idea or request. The skillful influencer takes this into account in framing his or her influence approach. Research limitations/implications – This paper is the result of many years of observation and pattern recognition in situations where people are asked to influence one another. It is also consistent with current behavioral economics research, but is not itself based on laboratory research. Practical implications – Applying this approach should enable readers to have better results in influencing a variety of people. Originality/value – Influence is a key skill set for leaders and key contributors.


1901 ◽  
Vol 67 (435-441) ◽  
pp. 245-250 ◽  

The primary object of the investigations described in the paper was the determination of the energy required to produce a gaseous ion when X rays pass through a gas, and to deduce from the result the amount of energy radiated out into the gas by uranium, thorium, and the other radio-active substances. In order to determine this “ionic energy” it has been necessary to accurately measure the heating effect of X rays and the absorption Röntgen radiation in passing through a gas.


Sign in / Sign up

Export Citation Format

Share Document