scholarly journals Local density determines nuclear movements during syncytial blastoderm formation in a cricket

2021 ◽  
Author(s):  
Seth Donoughe ◽  
Jordan Hoffmann ◽  
Taro Nakamura ◽  
Chris H. Rycroft ◽  
Cassandra G. Extavour

AbstractAnimal embryos pass through an early stage called the blastoderm, in which cells are arranged in a continuous layer at the periphery of the embryo. Despite the broad evolutionary conservation of this embryonic stage, the cellular behaviours that lead to blastoderm formation vary across animals, and the mechanisms that regulate these behaviours are poorly understood. In most insects, pre-blastoderm development begins as a syncytium: that is, many nuclei divide and move throughout the single shared cytoplasm of the embryo. Then these syncytial nuclei must move from their scattered positions within the cytoplasm to form a single layer at the cortex. Recent work showed that in the fruit fly Drosophila melanogaster, some of these early nuclear movements are caused by pulses of cytoplasmic flows that are coupled to synchronous divisions. Here, we show that the cricket Gryllus bimaculatus has an altogether different solution to the problem. We quantified nuclear dynamics during the period of syncytial cleavages and movements that lead to blastoderm formation in G. bimaculatus embryos with transgenically labeled nuclei. We found that: (1) cytoplasmic flows were unimportant for nuclear movement, and (2) division cycles, nuclear speeds, and the directions of nuclear movement were not synchronized across the embryo as in D. melanogaster, but instead were heterogeneous in space and time. Moreover, several aspects of nuclear divisions and movements were correlated with local nuclear density. We show that previously proposed models for the movement of D. melanogaster syncytial nuclei cannot explain the behaviours of G. bimaculatus syncytial nuclei. We introduce a novel geometric model based on asymmetric local pulling forces on nuclei, which recapitulates the density-dependent nuclear speeds and orientations of unperturbed G. bimaculatus embryos, without invoking the common paradigms of localized polarity cues or cell lineage as determinants of nuclear activity. Our model also accurately predicts nuclear behavior in embryos physically manipulated to contain regions of atypical nuclear densities. We show that this model can be used to generate falsifiable predictions about the dynamics of blastoderm formation in other insect species.

Author(s):  
Francesca Pagani ◽  
Elisa Tratta ◽  
Patrizia Dell’Era ◽  
Manuela Cominelli ◽  
Pietro Luigi Poliani

AbstractEarly B-cell factor-1 (EBF1) is a transcription factor with an important role in cell lineage specification and commitment during the early stage of cell maturation. Originally described during B-cell maturation, EBF1 was subsequently identified as a crucial molecule for proper cell fate commitment of mesenchymal stem cells into adipocytes, osteoblasts and muscle cells. In vessels, EBF1 expression and function have never been documented. Our data indicate that EBF1 is highly expressed in peri-endothelial cells in both tumor vessels and in physiological conditions. Immunohistochemistry, quantitative reverse transcription polymerase chain reaction (RT-qPCR) and fluorescence-activated cell sorting (FACS) analysis suggest that EBF1-expressing peri-endothelial cells represent bona fide pericytes and selectively express well-recognized markers employed in the identification of the pericyte phenotype (SMA, PDGFRβ, CD146, NG2). This observation was also confirmed in vitro in human placenta-derived pericytes and in human brain vascular pericytes (HBVP). Of note, in accord with the key role of EBF1 in the cell lineage commitment of mesenchymal stem cells, EBF1-silenced HBVP cells showed a significant reduction in PDGFRβ and CD146, but not CD90, a marker mostly associated with a prominent mesenchymal phenotype. Moreover, the expression levels of VEGF, angiopoietin-1, NG2 and TGF-β, cytokines produced by pericytes during angiogenesis and linked to their differentiation and activation, were also significantly reduced. Overall, the data suggest a functional role of EBF1 in the cell fate commitment toward the pericyte phenotype.


1986 ◽  
Vol 163 ◽  
pp. 27-58 ◽  
Author(s):  
Laurence Armi

This is a theoretical and experimental study of the basic hydraulics of two flowing layers. Unlike single-layer flows, two-layer flows respond quite differently to bottom depth as opposed to width variations. Bottom-depth changes affect the lower layer directly and the upper layer only indirectly. Changes in width can affect both layers. In fact for flows through a contraction control two distinct flow configurations are possible; which one actually occurs depends on the requirements of matching a downstream flow. Two-layer flows can pass through internally critical conditions at other than the narrowest section. When the two layers are flowing in the same direction, the result is a strong coupling between the two layers in the neighbourhood of the control. For contractions a particularly simple flow then exists upstream in which there is no longer any significant interfacial dynamics; downstream in the divergent section the flow remains internally supercritical, causing one of the layers to be rapidly accelerated with a resulting instability at the interface. A brief discussion of internal hydraulic jumps based upon the energy equations as opposed to the more traditional momentum equations is included. Previous uniqueness problems are thereby avoided.


Author(s):  
Fei Li ◽  
Qiuyue Yuan ◽  
Wei Di ◽  
Xinyi Xia ◽  
Zhuang Liu ◽  
...  

AbstractWhile cancer is commonly perceived as a disease of dedifferentiation, the hallmark of early stage prostate cancer is paradoxically the loss of more plastic basal cells and the abnormal proliferation of more differentiated secretory luminal cells. However, the mechanism of prostate cancer pro-luminal differentiation is largely unknown. Through integrating analysis of the transcription factors (TFs) from 806 human prostate cancers, we have identified that ERG highly correlated with prostate cancer luminal subtyping. ERG overexpression in luminal epithelial cells inhibits its normal plasticity to transdifferentiate into basal lineage and ERG supersedes PTEN-loss which favors basal differentiation. ERG knock-out disrupted prostate cell luminal differentiation, whereas AR knock-out had no such effects. Trp63 is a known master regulator of prostate basal lineage. Through analysis of 3D chromatin architecture, we found that ERG binds and inhibits the enhancer activity and chromatin looping of a Trp63 distal enhancer, thereby silencing its gene expression. Specific deletion of the distal ERG binding site resulted in the loss of ERG-mediated inhibition of basal differentiation. Thus, ERG orchestrates chromatin interactions and regulates prostate cell lineage toward pro-luminal program, as its fundamental role on lineage differentiation in prostate cancer initiation.


Author(s):  
Malgorzata M. Sturgill ◽  
Elaine Cohen ◽  
Richard F. Riesenfeld

Abstract During early stages of design, the mere presence of items, their relative positioning, and their interrelationships can be more significant than fine details, like exact dimensions, whether a hole is counterbored, or the exact cross-sectional shape of a groove. Most CAD systems have little, if any, support for this critical, incipient design stage, In addressing this economically compelling and highly leveraged area, we present an intuitive, feature-based approach to 3-D design which permits a complete first pass through the design-manufacturing cycle even before a detailed specification is complete. We report a functioning 3-D design front-end for a solid modeling system that has been used for fast intra-part and inter-part, visual, generalized feature specification, a frontend that is intimately connected to the system so that both visual and detailed design can be carried out concurrently on the same model to meet designer needs. Hence, the design that is “captured” during the sketch and modify phase using this approach is fully usable for activities that traditionally require a fully detailed solid model, such as rendering, finite element and other analysis, assembly analysis, process planning, and manufacturing at this initial stage instead of the traditionally late stages.


2020 ◽  
Vol 117 (26) ◽  
pp. 14676-14681 ◽  
Author(s):  
Yantao Yang ◽  
Wenyuan Chen ◽  
Roberto Verzicco ◽  
Detlef Lohse

When fluid stratification is induced by the vertical gradients of two scalars with different diffusivities, double-diffusive convection (DDC) may occur and play a crucial role in mixing. Such a process exists in many natural and engineering environments. Especially in the ocean, DDC is omnipresent since the seawater density is affected by temperature and salinity. The most intriguing phenomenon caused by DDC is the thermohaline staircase, i.e., a stack of alternating well-mixed convection layers and sharp interfaces with very large gradients in both temperature and salinity. Here we investigate DDC and thermohaline staircases in the salt finger regime, which happens when warm saltier water lies above cold fresher water and is commonly observed in the (sub)tropic regions. By conducting direct numerical simulations over a large range of parameters, we reveal that multiple equilibrium states exist in fingering DDC and staircases even for the same control parameters. Different states can be established from different initial scalar distributions or different evolution histories of the flow parameters. Hysteresis appears during the transition from a staircase to a single salt finger interface. For the same local density ratio, salt finger interfaces in the single-layer state generate very different fluxes compared to those within staircases. However, the salinity flux for all salt finger interfaces follows the same dependence on the salinity Rayleigh number of the layer and can be described by an effective power law scaling. Our findings have direct applications to oceanic thermohaline staircases.


Author(s):  
Daniel Möller ◽  
Maximilian Jüngst ◽  
Felix Holzinger ◽  
Christoph Brandstetter ◽  
Heinz-Peter Schiffer ◽  
...  

A flutter phenomenon was observed in a 1.5-stage configuration at the Darmstadt transonic compressor. This phenomenon is investigated numerically for different compressor speeds. The flutter occurs for the second eigenmode of the rotor blades and is caused by tip clearance flow which is able to pass through multiple rotor gaps at highly throttled operating points. The vibration pattern during flutter is accompanied by a pressure fluctuation pattern of the tip clearance flow which is interacting with the blade motion causing the aeroelastic instability. The velocity of the tip clearance flow fluctuation is about 50% of the blade tip speed for simulation and experiment and also matches the mean convective velocity inside the rotor gap. This is consistent for all compressor speeds. From this investigations, general guidelines are drawn which can be applied at an early stage during compressor design to evaluate the susceptibility to this kind of blade vibration.


1970 ◽  
Vol 7 (2) ◽  
pp. 457-466 ◽  
Author(s):  
William M. Chapple

Examination and comparison of several computational studies of finite-amplitude single-layer folding bring to light an important unifying concept, that of the finite-amplitude instability. If the fold-causing stresses are constant throughout the development of a fold, the overall shortening strain-rate due to the folding will first show a marked increase with increasing fold amplitude and then decrease as the fold becomes tightly appressed; on the other hand, if the shortening strain-rate is held constant, the stresses necessary to maintain the constant shortening rate will decrease and then increase again. Considering the layer-in-medium system as a whole, this instability results in a bulk-effective viscosity with respect to layer-parallel compression, which is first high, then decreases to a minimum, and then rises again, These changes in bulk-effective viscosity are large, nearly two orders of magnitude.Effects of the finite-amplitude instability on the internal stresses within the layer and surrounding medium are as follows. First, there will probably be an early, low-amplitude stage with high layer-parallel stresses within the competent layer. The major development of deformation fabrics may occur during (his early stage. Second, development of plastic yield in the crestal region of the fold is strongly controlled by the details of external load pattern and therefore by the mechanism causing the folding. Third, the increase in effective bulk viscosity of the layer-in-medium system corresponds to a major rearrangement of the deformation patterns in both the medium and the layer.Consideration of décollement folding and multi-layer folding suggests that the concept of finite-amplitude instability may be applicable, at least qualitatively, to these more common fold types. If this is true, then the concept is important in considering more general geologic questions such as the dating of an orogenic episode by angular unconformity.


Author(s):  
A. U. Larkman ◽  
M. A. Carter

Actinia equina var. mesembryanthemum, the beadlet anemone (Stephenson, 1935), is a very common and widely distributed littoral anthozoan, whose sexual reproduction shows several interesting characteristics. Adult sea anemones of both sexes brood planulae and more advanced developmental stages within the gastrovascular cavity, although earlier embryonic stages are rarely found brooded in this way. Chia & Rostron (1970) suggest that embryos are expelled from the parent female anemone at an early stage and pass through a free-living phase before re-entering anemones of either sex for brooding. However, recent work (Cain, 1974) suggests that juvenile anemones are genetically related to the adult anemones in which they are brooded, and also the distribution of genetic material during sexual reproduction appears to be abnormal (Carter & Thorp, 1979). In an attempt to achieve a better understanding of the unusual sexual reproduction of this species, an ultrastructural investigation of gametogenesis was undertaken. This paper describes the fine structure of the spermatozoon within the testis.


2020 ◽  
Vol 48 (20) ◽  
pp. 11452-11467
Author(s):  
Yenan Yang ◽  
Xiaoli Zhu ◽  
Xiang Jia ◽  
Wanwan Hou ◽  
Guoqiang Zhou ◽  
...  

Abstract Msh homeobox (Msx) is a subclass of homeobox transcriptional regulators that control cell lineage development, including the early stage of vertebrate limb development, although the underlying mechanisms are not clear. Here, we demonstrate that Msx1 promotes the proliferation of myoblasts and mesenchymal stem cells (MSCs) by enhancing mitogen-activated protein kinase (MAPK) signaling. Msx1 directly binds to and upregulates the expression of fibroblast growth factor 9 (Fgf9) and Fgf18. Accordingly, knockdown or antibody neutralization of Fgf9/18 inhibits Msx1-activated extracellular signal-regulated kinase 1/2 (Erk1/2) phosphorylation. Mechanistically, we determined that the phosphorylation of Msx1 at Ser136 is critical for enhancing Fgf9 and Fgf18 expression and cell proliferation, and cyclin-dependent kinase 1 (CDK1) is apparently responsible for Ser136 phosphorylation. Furthermore, mesenchymal deletion of Msx1/2 results in decreased Fgf9 and Fgf18 expression and Erk1/2 phosphorylation, which leads to serious defects in limb development in mice. Collectively, our findings established an important function of the Msx1-Fgf-MAPK signaling axis in promoting cell proliferation, thus providing a new mechanistic insight into limb development.


Sign in / Sign up

Export Citation Format

Share Document