scholarly journals Developmental neuroanatomy of the Rosy Bitterling Rhodeus ocellatus (Teleostei: Cypriniformes)—A microCT study

2021 ◽  
Author(s):  
Wenjing Yi ◽  
Thomas Mueller ◽  
Martin Rücklin ◽  
Michael K. Richardson
Keyword(s):  
Brain Development ◽  
Three Dimensional ◽  
Freshwater Mussel ◽  
Micro Computed Tomography ◽  
Gill Chamber ◽  
Model Segmentation ◽  
Parasitic Lifestyle ◽  
The Brain ◽  
Embryonic And Larval Development ◽  
Rhodeus Ocellatus

ABSTRACTBitterlings are a group of teleost fish (Cyprinifromes: Acheilanathidae) notable for their brood parasitic lifestyle. Bitterling embryos develop as parasites inside the gill chamber of their freshwater mussel hosts. However, little is known about brain development in this species. Here, we have imaged the development of the brain of the Rosy Bitterling (Rhodeus ocellatus) at four embryonic stages (165, 185, 210, 235 hours post-fertilization) using micro-computed tomography (microCT) with special emphasis on developmental regionalization and brain ventricular organization. We provide a detailed neuroanatomical account of the development of the brain divisions with reference to The Atlas of Early zebrafish Brain Development and the updated prosomeric model. Segmentation and three-dimensional visualization of the ventricular system were performed in order to clarify changes in the longitudinal brain axis as a result of cephalic flexure during development. During early embryonic and larval development, we find that histological differentiation, tissue boundaries, periventricular proliferation zones, and ventricular spaces are all recognizable using microCT. Importantly, our approach is validated by the fact that the profile of CT values displayed here in the bitterling brain are consistent with genoarchitecture identified in previous studies. We also find developmental heterochrony of the inferior lobe in the Rosy Bitterling compared to the zebrafish. Our study provides a foundation for future studies of the brain development in the Rosy Bitterling, a valuable model species for studying the evolutionary adaptations associated with brood parasitism.

scholarly journals The orthopedic characterization of cfap298tm304 mutants validate zebrafish to faithfully model human AIS

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Marie-Hardy Laura ◽  
Cantaut-Belarif Yasmine ◽  
Pietton Raphaël ◽  
Slimani Lotfi ◽  
Pascal-Moussellard Hugues
Keyword(s):  
Cerebrospinal Fluid ◽  
Three Dimensional ◽  
Fluid Circulation ◽  
Micro Computed Tomography ◽  
Csf Flow ◽  
Cerebrospinal Fluid Circulation ◽  
Clinical Criteria ◽  
Brain And Spinal Cord ◽  
The Brain

AbstractCerebrospinal fluid (CSF) circulation relies on the beating of motile cilia projecting in the lumen of the brain and spinal cord cavities Mutations in genes involved in cilia motility disturb cerebrospinal fluid circulation and result in scoliosis-like deformities of the spine in juvenile zebrafish. However, these defects in spine alignment have not been validated with clinical criteria used to diagnose adolescent idiopathic scoliosis (AIS). The aim of this study was to describe, using orthopaedic criteria the spinal deformities of a zebrafish mutant model of AIS targeting a gene involved in cilia polarity and motility, cfap298tm304. The zebrafish mutant line cfap298tm304, exhibiting alteration of CSF flow due to defective cilia motility, was raised to the juvenile stage. The analysis of mutant animals was based on micro-computed tomography (micro-CT), which was conducted in a QUANTUM FX CALIPER, with a 59 µm-30 mm protocol. 63% of the cfap298tm304 zebrafish analyzed presented a three-dimensional deformity of the spine, that was evolutive during the juvenile phase, more frequent in females, with a right convexity, a rotational component and involving at least one dislocation. We confirm here that cfap298tm304 scoliotic individuals display a typical AIS phenotype, with orthopedic criteria mirroring patient’s diagnosis.

scholarly journals Application of subject-specific adaptive mechanical loading for bone healing in a mouse tail vertebral defect

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Angad Malhotra ◽  
Matthias Walle ◽  
Graeme R. Paul ◽  
Gisela A. Kuhn ◽  
Ralph Müller
Keyword(s):  
Mechanical Loading ◽  
Bone Defect ◽  
Bone Healing ◽  
Three Dimensional ◽  
Patient Specific ◽  
Dependent Manner ◽  
Micro Computed Tomography ◽  
Computed Tomography Images ◽  
Bone Defect Healing ◽  
Subject Specific

AbstractMethods to repair bone defects arising from trauma, resection, or disease, continue to be sought after. Cyclic mechanical loading is well established to influence bone (re)modelling activity, in which bone formation and resorption are correlated to micro-scale strain. Based on this, the application of mechanical stimulation across a bone defect could improve healing. However, if ignoring the mechanical integrity of defected bone, loading regimes have a high potential to either cause damage or be ineffective. This study explores real-time finite element (rtFE) methods that use three-dimensional structural analyses from micro-computed tomography images to estimate effective peak cyclic loads in a subject-specific and time-dependent manner. It demonstrates the concept in a cyclically loaded mouse caudal vertebral bone defect model. Using rtFE analysis combined with adaptive mechanical loading, mouse bone healing was significantly improved over non-loaded controls, with no incidence of vertebral fractures. Such rtFE-driven adaptive loading regimes demonstrated here could be relevant to clinical bone defect healing scenarios, where mechanical loading can become patient-specific and more efficacious. This is achieved by accounting for initial bone defect conditions and spatio-temporal healing, both being factors that are always unique to the patient.

scholarly journals Direct 3D model extraction method for color volume images

2021 ◽  
Vol 29 ◽  
pp. 133-140
Author(s):  
Bin Liu ◽  
Shujun Liu ◽  
Guanning Shang ◽  
Yanjie Chen ◽  
Qifeng Wang ◽  
...  
Keyword(s):  
3D Model ◽  
Clinical Medicine ◽  
Three Dimensional ◽  
Laplacian Matrix ◽  
Segmentation Method ◽  
Human Organs ◽  
Model Segmentation ◽  
Treatment Objective ◽  
Organ Models ◽  
Different Parts

BACKGROUND: There is a great demand for the extraction of organ models from three-dimensional (3D) medical images in clinical medicine diagnosis and treatment. OBJECTIVE: We aimed to aid doctors in seeing the real shape of human organs more clearly and vividly. METHODS: The method uses the minimum eigenvectors of Laplacian matrix to automatically calculate a group of basic matting components that can properly define the volume image. These matting components can then be used to build foreground images with the help of a few user marks. RESULTS: We propose a direct 3D model segmentation method for volume images. This is a process of extracting foreground objects from volume images and estimating the opacity of the voxels covered by the objects. CONCLUSIONS: The results of segmentation experiments on different parts of human body prove the applicability of this method.

scholarly journals In-Vivo Degradation Behavior and Osseointegration of 3D Powder-Printed Calcium Magnesium Phosphate Cement Scaffolds

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 946
Author(s):  
Katharina Kowalewicz ◽  
Elke Vorndran ◽  
Franziska Feichtner ◽  
Anja-Christina Waselau ◽  
Manuel Brueckner ◽  
...  
Keyword(s):  
Three Dimensional ◽  
Bone Substitutes ◽  
Magnesium Phosphate ◽  
Degradation Behavior ◽  
Micro Computed Tomography ◽  
Calcium Magnesium ◽  
Interest In Research ◽  
In Vivo Degradation ◽  
Volume Decrease

Calcium magnesium phosphate cements (CMPCs) are promising bone substitutes and experience great interest in research. Therefore, in-vivo degradation behavior, osseointegration and biocompatibility of three-dimensional (3D) powder-printed CMPC scaffolds were investigated in the present study. The materials Mg225 (Ca0.75Mg2.25(PO4)2) and Mg225d (Mg225 treated with diammonium hydrogen phosphate (DAHP)) were implanted as cylindrical scaffolds (h = 5 mm, Ø = 3.8 mm) in both lateral femoral condyles in rabbits and compared with tricalcium phosphate (TCP). Treatment with DAHP results in the precipitation of struvite, thus reducing pore size and overall porosity and increasing pressure stability. Over 6 weeks, the scaffolds were evaluated clinically, radiologically, with Micro-Computed Tomography (µCT) and histological examinations. All scaffolds showed excellent biocompatibility. X-ray and in-vivo µCT examinations showed a volume decrease and increasing osseointegration over time. Structure loss and volume decrease were most evident in Mg225. Histologically, all scaffolds degraded centripetally and were completely traversed by new bone, in which the remaining scaffold material was embedded. While after 6 weeks, Mg225d and TCP were still visible as a network, only individual particles of Mg225 were present. Based on these results, Mg225 and Mg225d appear to be promising bone substitutes for various loading situations that should be investigated further.

scholarly journals Cinematic rendering of a burst sagittal suture caused by an occipito-frontal gunshot wound

2021 ◽  
Author(s):  
Dominic Gascho ◽  
Michael J. Thali ◽  
Rosa M. Martinez ◽  
Stephan A. Bolliger
Keyword(s):  
Gunshot Wound ◽  
Three Dimensional ◽  
The Novel ◽  
Sagittal Suture ◽  
Resonance Imaging ◽  
Cinematic Rendering ◽  
Reconstruction Methods ◽  
Dimensional Reconstruction ◽  
Magnetic Resonance Imaging Mri ◽  
The Brain

AbstractThe computed tomography (CT) scan of a 19-year-old man who died from an occipito-frontal gunshot wound presented an impressive radiating fracture line where the entire sagittal suture burst due to the high intracranial pressure that arose from a near-contact shot from a 9 mm bullet fired from a Glock 17 pistol. Photorealistic depictions of the radiating fracture lines along the cranial bones were created using three-dimensional reconstruction methods, such as the novel cinematic rendering technique that simulates the propagation and interaction of light when it passes through volumetric data. Since the brain had collapsed, depiction of soft tissue was insufficient on CT images. An additional magnetic resonance imaging (MRI) examination was performed, which enabled the diagnostic assessment of cerebral injuries.

scholarly journals Fast Nonsupervised 3D Registration of PET and MR Images of the Brain

1994 ◽  
Vol 14 (5) ◽  
pp. 749-762 ◽  
Author(s):  
Jean-François Mangin ◽  
Vincent Frouin ◽  
Isabelle Bloch ◽  
Bernard Bendriem ◽  
Jaime Lopez-Krahe
Keyword(s):  
Three Dimensional ◽  
Magnetic Resonance Images ◽  
Surface Matching ◽  
3D Registration ◽  
Matching Algorithm ◽  
Distance Map ◽  
Brain Surface ◽  
Discrete Surfaces ◽  
Positron Emission ◽  
The Brain

We propose a fully nonsupervised methodology dedicated to the fast registration of positron emission tomography (PET) and magnetic resonance images of the brain. First, discrete representations of the surfaces of interest (head or brain surface) are automatically extracted from both images. Then, a shape-independent surface-matching algorithm gives a rigid body transformation, which allows the transfer of information between both modalities. A three-dimensional (3D) extension of the chamfer-matching principle makes up the core of this surface-matching algorithm. The optimal transformation is inferred from the minimization of a quadratic generalized distance between discrete surfaces, taking into account between-modality differences in the localization of the segmented surfaces. The minimization process is efficiently performed via the precomputation of a 3D distance map. Validation studies using a dedicated brain-shaped phantom have shown that the maximum registration error was of the order of the PET pixel size (2 mm) for the wide variety of tested configurations. The software is routinely used today in a clinical context by the physicians of the Service Hospitalier Frédéric Joliot (>150 registrations performed). The entire registration process requires ∼5 min on a conventional workstation.

scholarly journals Heidelberg-mCT-Analyzer: a novel method for standardized microcomputed-tomography-guided evaluation of scaffold properties in bone and tissue research

2015 ◽  
Vol 2 (11) ◽  
pp. 150496 ◽  
Author(s):  
Fabian Westhauser ◽  
Christian Weis ◽  
Melanie Hoellig ◽  
Tyler Swing ◽  
Gerhard Schmidmaier ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Characteristic Parameter ◽  
Micro Computed Tomography ◽  
Mineral Density ◽  
Independent Analysis ◽  
Scaffold Properties

Bone tissue engineering and bone scaffold development represent two challenging fields in orthopaedic research. Micro-computed tomography (mCT) allows non-invasive measurement of these scaffolds’ properties in vivo . However, the lack of standardized mCT analysis protocols and, therefore, the protocols’ user-dependency make interpretation of the reported results difficult. To overcome these issues in scaffold research, we introduce the Heidelberg-mCT-Analyzer. For evaluation of our technique, we built 10 bone-inducing scaffolds, which underwent mCT acquisition before ectopic implantation (T0) in mice, and at explantation eight weeks thereafter (T1). The scaffolds’ three-dimensional reconstructions were automatically segmented using fuzzy clustering with fully automatic level-setting. The scaffold itself and its pores were then evaluated for T0 and T1. Analysing the scaffolds’ characteristic parameter set with our quantification method showed bone formation over time. We were able to demonstrate that our algorithm obtained the same results for basic scaffold parameters (e.g. scaffold volume, pore number and pore volume) as other established analysis methods. Furthermore, our algorithm was able to analyse more complex parameters, such as pore size range, tissue mineral density and scaffold surface. Our imaging and post-processing strategy enables standardized and user-independent analysis of scaffold properties, and therefore is able to improve the quantitative evaluations of scaffold-associated bone tissue-engineering projects.

Bone-brain crosstalk and potential associated diseases

2016 ◽  
Vol 28 (2) ◽  
Author(s):  
Audrey Rousseaud ◽  
Stephanie Moriceau ◽  
Mariana Ramos-Brossier ◽  
Franck Oury
Keyword(s):  
Central Nervous System ◽  
Nervous System ◽  
Brain Development ◽  
Cognitive Functions ◽  
Intimate Relationship ◽  
Whole Body ◽  
Reciprocal Relationships ◽  
Skeletal Homeostasis ◽  
The Central Nervous System ◽  
The Brain

AbstractReciprocal relationships between organs are essential to maintain whole body homeostasis. An exciting interplay between two apparently unrelated organs, the bone and the brain, has emerged recently. Indeed, it is now well established that the brain is a powerful regulator of skeletal homeostasis via a complex network of numerous players and pathways. In turn, bone via a bone-derived molecule, osteocalcin, appears as an important factor influencing the central nervous system by regulating brain development and several cognitive functions. In this paper we will discuss this complex and intimate relationship, as well as several pathologic conditions that may reinforce their potential interdependence.

Sign in / Sign up

Export Citation Format

Share Document