Multilayer thick-film ceramic for multichip modules with laser microvias

2018 ◽  
Vol 35 (3) ◽  
pp. 158-163
Author(s):  
Sebastian Löffler ◽  
Christopher Mauermann ◽  
Angela Rebs ◽  
Günter Reppe
Keyword(s):  
Thick Film ◽  
State Of The Art ◽  
Temperature Stability ◽  
Industrial Applications ◽  
Multichip Modules ◽  
Content Type ◽  
Fine Line ◽  
Current Design ◽  
Product Lifetime ◽  
Aerospace Medical

Purpose The purpose of the paper is to show up the current possibilities by combination of classic thick-film technology with advanced processing. Thick-film hybrid ceramic substrates have been a base for highly reliable devices for space, aerospace, medical and industrial applications since many years. The combination of classic thick-film printing with advanced technologies for fine line structuring provides substrates best suited for packaging solutions with challenging requirements, such as temperature stability and extended product lifetime. Combined with state of the art assembly technologies, thick-film substrates are used in highly demanding industries. Design/methodology/approach In recent years, several technologies for fine line structuring have been introduced, e.g. fine line printing, photo imaging, etching, laser structuring for local chip fan-out or fine line structuring on single layers. For further miniaturization of thick-film multilayers circuits, after solving the fine line resolution, the reduction of electrical connection of conductive layers through printed insulation/dielectric layer (via) diameters to connect the layers should be addressed. Findings The focus of this paper is to show the results of combining fine line structuring with laser microvias and to compare laser drilling in thick-films with different established via forming technologies. Originality/value The reduction of via size to 60 µm – smaller than 50% compared to using state-of-the-art printing technologies enables a solution for significant relaxation of current design possibilities.

Accurate grasp detection learning using oriented regression loss

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Xuan Zhao ◽  
Hancheng Yu ◽  
Mingkui Feng ◽  
Gang Sun
Keyword(s):  
Deep Learning ◽  
Design Methodology ◽  
State Of The Art ◽  
Ground Truth ◽  
Industrial Applications ◽  
Experimental Result ◽  
Orientation Factor ◽  
Content Type ◽  
Direction Error ◽  
Robotic Grasp

Purpose Robot automatic grasping has important application value in industrial applications. Recent works have explored on the performance of deep learning for robotic grasp detection. They usually use oriented anchor boxes (OABs) as detection prior and achieve better performance than previous works. However, the parameters of their loss belong to different coordinates, this may affect the regression accuracy. This paper aims to propose an oriented regression loss to solve the problem of inconsistency among the loss parameters. Design/methodology/approach In the oriented loss, the center coordinates errors between the ground truth grasp rectangle and the predicted grasp rectangle rotate to the vertical and horizontal of the OAB. And then the direction error is used as an orientation factor, combining with the errors of the rotated center coordinates, width and height of the predicted grasp rectangle. Findings The proposed oriented regression loss is evaluated on the YOLO-v3 framework to the grasp detection task. It yields state-of-the-art performance with an accuracy of 98.8% and a speed of 71 frames per second with GTX 1080Ti on Cornell datasets. Originality/value This paper proposes an oriented loss to improve the regression accuracy of deep learning for grasp detection. The authors apply the proposed deep grasp network to the visual servo intelligent crane. The experimental result indicates that the approach is accurate and robust enough for real-time grasping applications.

scholarly journals Smoothing additive manufactured parts using ns-pulsed laser radiation

2021 ◽  
Author(s):  
Florian Kuisat ◽  
Fernando Lasagni ◽  
Andrés Fabián Lasagni
Keyword(s):  
Surface Roughness ◽  
Mechanical Performance ◽  
State Of The Art ◽  
Pulsed Laser ◽  
Industrial Applications ◽  
Laser Source ◽  
Pulsed Laser Radiation ◽  
Current State ◽  
The Impact

AbstractIt is well known that the surface topography of a part can affect its mechanical performance, which is typical in additive manufacturing. In this context, we report about the surface modification of additive manufactured components made of Titanium 64 (Ti64) and Scalmalloy®, using a pulsed laser, with the aim of reducing their surface roughness. In our experiments, a nanosecond-pulsed infrared laser source with variable pulse durations between 8 and 200 ns was applied. The impact of varying a large number of parameters on the surface quality of the smoothed areas was investigated. The results demonstrated a reduction of surface roughness Sa by more than 80% for Titanium 64 and by 65% for Scalmalloy® samples. This allows to extend the applicability of additive manufactured components beyond the current state of the art and break new ground for the application in various industrial applications such as in aerospace.

scholarly journals An enhancement of the current design concepts for the improved consideration of residual stresses in fatigue-loaded welds

2021 ◽  
Vol 65 (4) ◽  
pp. 643-651
Author(s):  
Th. Nitschke-Pagel ◽  
J. Hensel
Keyword(s):  
Residual Stresses ◽  
State Of The Art ◽  
High Strength Steels ◽  
High Strength ◽  
Design Tools ◽  
Design Concepts ◽  
Treatment Processes ◽  
Real Distribution ◽  
Current Design ◽  
Reliable Knowledge

AbstractThe consideration of residual stresses in fatigue-loaded welds is currently done only qualitatively without reliable knowledge about their real distribution, amount and prefix. Therefore, the tools which enable a more or less unsafe consideration in design concepts are mainly based on unsafe experiences and doubtful assumptions. Since the use of explicitly determined residual stresses outside the welding community is state of the art, the target of the presented paper is to show a practicable way for an enhanced consideration of residual stresses in the current design tools. This is not only limited on residual stresses induced by welding, but also on post-weld treatment processes like HFMI or shot peening. Results of extended experiments with longitudinal fillet welds and butt welds of low and high strength steels evidently show that an improved use of residual stresses in fatigue strength approximation enables a better evaluation of peening processes as well as of material adjusted welding procedures or post-weld stress relief treatments. The concept shows that it is generally possible to overcome the existing extremely conservative but although unsafe rules and regulations and may also enable the improved use of high strength steels.

scholarly journals Absorption heat transformer - state-of-the-art of industrial applications

2021 ◽  
Vol 141 ◽  
pp. 110757 ◽  
Author(s):  
Falk Cudok ◽  
Niccolò Giannetti ◽  
José L. Corrales Ciganda ◽  
Jun Aoyama ◽  
P. Babu ◽  
...  
Keyword(s):  
State Of The Art ◽  
Industrial Applications ◽  
Heat Transformer

Performance measurement and management in the public sector: state of the art and research opportunities

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Patrizia Garengo ◽  
Alberto Sardi
Keyword(s):  
Public Sector ◽  
Performance Measurement ◽  
State Of The Art ◽  
Business Management ◽  
Academic Research ◽  
Conceptual Structure ◽  
Content Type ◽  
Research Opportunities ◽  
The Public ◽  
Public Organisations

PurposeSince the 1980s, performance measurement and management (PMM) has been described as an essential element of new public management (NPM) reforms. The purpose of this paper is to provide an overview of the current state of the art and future research opportunities for PMM in public sector management.Design/methodology/approachThe paper carried out a bibliometric literature review using two main techniques named (1) performance analysis and (2) science mapping techniques. It investigated the academic research area describing the main publications' trend, the conceptual structure and its evolution from 1996 to 2019.FindingsThe results highlighted the growing relevance of PMM research in public organisations and confirmed a great interest of the business, management and accounting literature on PMM in public sector management. Furthermore, the results also described a conceptual structure of the public PMM literature analysed and its evolution being too generic to answer public organisations' needs. The results identified five main research gaps and research opportunities.Originality/valueAlthough the adoption of rigorous bibliometric techniques was recognised as being useful for assessing the academic research study, the paper describes the business, management and accounting literature contributing to new theoretical and practical future opportunities.

Information processing by elderly consumers: a five-decade review

2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Gianluigi Guido ◽  
Marco Pichierri ◽  
Cristian Rizzo ◽  
Verdiana Chieffi ◽  
George Moschis
Keyword(s):  
Information Processing ◽  
Design Methodology ◽  
State Of The Art ◽  
Relevant Literature ◽  
Academic Research ◽  
The Elderly ◽  
Marketing Strategies ◽  
Content Type ◽  
Processing Activity ◽  
Elderly Consumers

Purpose The purpose of this study is to review scholarly research on elderly consumers’ information processing and suggest implications for services marketing. Design/methodology/approach The review encompasses a five-decade period (1970–2018) of academic research and presents relevant literature in four main areas related to information processing: sensation, attention, interpretation and memory. Findings The study illustrates how each of the aforementioned phases of the information processing activity may affect how elderly individuals buy and consume products and services, emphasizing the need for a better comprehension of the elderly to develop effectual marketing strategies. Originality/value The study provides readers with detailed state-of-the-art knowledge about older consumers’ information processing, offering a comprehensive review of academic research that companies can use to improve the effectiveness of their marketing efforts that target the elderly market.

An experimental study on feature-based SLAM for multi-legged robots with RGB-D sensors

2017 ◽  
Vol 44 (4) ◽  
pp. 428-441 ◽  
Author(s):  
Michał R. Nowicki ◽  
Dominik Belter ◽  
Aleksander Kostusiak ◽  
Petr Cížek ◽  
Jan Faigl ◽  
...  
Keyword(s):  
Performance Metrics ◽  
State Of The Art ◽  
Building Blocks ◽  
Bundle Adjustment ◽  
The State ◽  
Legged Robots ◽  
Evaluation Methodology ◽  
Walking Robots ◽  
Content Type ◽  
Feature Based

Purpose This paper aims to evaluate four different simultaneous localization and mapping (SLAM) systems in the context of localization of multi-legged walking robots equipped with compact RGB-D sensors. This paper identifies problems related to in-motion data acquisition in a legged robot and evaluates the particular building blocks and concepts applied in contemporary SLAM systems against these problems. The SLAM systems are evaluated on two independent experimental set-ups, applying a well-established methodology and performance metrics. Design/methodology/approach Four feature-based SLAM architectures are evaluated with respect to their suitability for localization of multi-legged walking robots. The evaluation methodology is based on the computation of the absolute trajectory error (ATE) and relative pose error (RPE), which are performance metrics well-established in the robotics community. Four sequences of RGB-D frames acquired in two independent experiments using two different six-legged walking robots are used in the evaluation process. Findings The experiments revealed that the predominant problem characteristics of the legged robots as platforms for SLAM are the abrupt and unpredictable sensor motions, as well as oscillations and vibrations, which corrupt the images captured in-motion. The tested adaptive gait allowed the evaluated SLAM systems to reconstruct proper trajectories. The bundle adjustment-based SLAM systems produced best results, thanks to the use of a map, which enables to establish a large number of constraints for the estimated trajectory. Research limitations/implications The evaluation was performed using indoor mockups of terrain. Experiments in more natural and challenging environments are envisioned as part of future research. Practical implications The lack of accurate self-localization methods is considered as one of the most important limitations of walking robots. Thus, the evaluation of the state-of-the-art SLAM methods on legged platforms may be useful for all researchers working on walking robots’ autonomy and their use in various applications, such as search, security, agriculture and mining. Originality/value The main contribution lies in the integration of the state-of-the-art SLAM methods on walking robots and their thorough experimental evaluation using a well-established methodology. Moreover, a SLAM system designed especially for RGB-D sensors and real-world applications is presented in details.

A NEW LAYOUT DESIGN SYSTEM FOR MULTICHIP MODULES

1995 ◽  
Vol 06 (03) ◽  
pp. 509-538 ◽  
Author(s):  
BERNHARD M. RIESS ◽  
ANDREAS A. SCHOENE
Keyword(s):  
Efficient Algorithm ◽  
State Of The Art ◽  
Layout Design ◽  
The State ◽  
Design System ◽  
Multichip Modules ◽  
Analytical Technique ◽  
Cut Method ◽  
First Time ◽  
Three Components

A new layout design system for multichip modules (MCMs) consisting of three components is described. It includes a k-way partitioning approach, an algorithm for pin assignment, and a placement package. For partitioning, we propose an analytical technique combined with a problem-specific multi-way ratio cut method. This method considers fixed module-level pad positions and assigns the cells to regularly arranged chips on the MCM substrate. In the subsequent pin assignment step the chip-level pads resulting from cut nets are positioned on the chip borders. Pin assignment is performed by an efficient algorithm, which profits from the cell coordinates generated by the analytical technique. Global and final placement for each chip is computed by the state-of-the-art placement tools GORDIANL and DOMINO. For the first time, results for MCM layout designs of benchmark circuits with up to 100,000 cells are presented. They show a small number of required chip-level pads, which is the most restricted resource in MCM design, and short total wire lengths.

Learning from criticisms of quality management

2015 ◽  
Vol 7 (2/3) ◽  
pp. 201-216 ◽  
Author(s):  
Gilles Barouch ◽  
Stéphane Kleinhans
Keyword(s):  
Quality Management ◽  
Literature Review ◽  
Design Methodology ◽  
State Of The Art ◽  
Senior Managers ◽  
Content Type ◽  
Adequate Response ◽  
Academic Results

Purpose – This paper aims at summing up the main criticisms concerning quality management (QM) in order to address them through objective arguments or extant research. Since its diffusion in the Occident in the 70s, QM gained as much approvals as criticisms. Therefore, with 40 years distance, it seems useful to sum up the main criticisms addressed to QM, to present a synthesis of the answers provided by researchers to these criticisms and to propose extant research when it appears that some criticisms have not received yet the adequate response. Design/methodology/approach – This paper is based on a literature review. Findings – This paper comes up with a list of the main criticisms addressed to QM. Then, main causes of criticisms are identified: ignorance of QM, confusion concerning QM definitions and theory and misuse of QM by senior managers. At last, QM organizational solutions are proposed which answer most expressed criticisms. Extant research tracks are considered for those relevant criticisms which have not been sufficiently addressed until now. Research limitations/implications – Further research will look into depicting a survey conducted among QM professionals concerning QM criticisms in their organization and confronting them to these academic results. Originality/value – This paper actualizes and completes Giroux and Landry’s (1998) article which dealt extensively with QM criticisms. Professionals will find in this paper answers to most criticisms against QM and a better understanding of the present limits of this discipline. Researchers will be provided with a state of the art concerning this sensitive topic, allowing them to go deeper in the fields that require special attention.

Environmental tests of embedded thin- and thick-film resistors in comparison to chip resistors

Circuit World ◽  
2014 ◽  
Vol 40 (1) ◽  
pp. 7-12 ◽  
Author(s):  
Wojciech Steplewski ◽  
Andrzej Dziedzic ◽  
Janusz Borecki ◽  
Grazyna Koziol ◽  
Tomasz Serzysko
Keyword(s):  
Thin Film ◽  
Thick Film ◽  
Electrical Resistance ◽  
Printed Circuit Boards ◽  
Base Material ◽  
Forming Process ◽  
Content Type ◽  
Thin Film Resistors ◽  
Embedded Resistors ◽  
The Impact

Purpose – The purpose of this paper is to investigate the influence of parameters of embedded resistive elements manufacturing process as well as the influence of environmental factors on their electrical resistance. The investigations were made in comparison to the similar constructions of discrete chip resistors assembled to standard printed circuit boards (PCBs). Design/methodology/approach – The investigations were based on the thin-film resistors made of NiP alloy, thick-film resistors made of carbon or carbon-silver inks as well as chip resistors in 0402 and 0603 packages. The polymer thick-film resistive films were screen-printed on the several types finishing materials of contact terminations such as copper, silver, and gold. To determine the sensitivity of embedded resistors versus standard assembled chip resistors on environmental exposure, the climatic chamber was used. The measurements of resistance were carried out periodically during the tests, and after the exposure cycles. Findings – The results show that the change of electrical resistance of embedded resistors, in dependence of construction and base material, is different and mainly not exceed the range of 3 per cent. The achieved results in reference to thin-film resistors are comparable with results for standard chip resistors. However, the results that were obtained for thick-film resistors with Ag and Ni/Au contacts are similar. It was not found the big differences between resistors with and without conformal coating. Research limitations/implications – The studies show that embedded resistors can be used interchangeably with chip resistors. It allows to save the area on the surface of PCB, occupied by these passive elements, for assembly of active elements (ICs) and thus enable to miniaturization of electronic devices. But embedding of passive elements into PCB requires to tackle the effect of each forming process steps on the operational properties. Originality/value – The technique of passive elements embedding into PCB is generally known; however, there are no detailed reports on the impact of individual process steps and environmental conditions on the stability of their electrical resistance. The studies allow to understand the importance of each factor process and the mechanisms of operational properties changes depending on the used materials.

Sign in / Sign up

Export Citation Format

Share Document