scholarly journals Smoothing additive manufactured parts using ns-pulsed laser radiation

Author(s):  
Florian Kuisat ◽  
Fernando Lasagni ◽  
Andrés Fabián Lasagni

AbstractIt is well known that the surface topography of a part can affect its mechanical performance, which is typical in additive manufacturing. In this context, we report about the surface modification of additive manufactured components made of Titanium 64 (Ti64) and Scalmalloy®, using a pulsed laser, with the aim of reducing their surface roughness. In our experiments, a nanosecond-pulsed infrared laser source with variable pulse durations between 8 and 200 ns was applied. The impact of varying a large number of parameters on the surface quality of the smoothed areas was investigated. The results demonstrated a reduction of surface roughness Sa by more than 80% for Titanium 64 and by 65% for Scalmalloy® samples. This allows to extend the applicability of additive manufactured components beyond the current state of the art and break new ground for the application in various industrial applications such as in aerospace.

2020 ◽  
pp. 1599-1631
Author(s):  
Stathis Th. Konstantinidis ◽  
Ellen Brox ◽  
Per Egil Kummervold ◽  
Josef Hallberg ◽  
Gunn Evertsen ◽  
...  

The population is getting older, and the resources for care will be even more limited in the future than they are now. There is thus an aim for the society that the seniors can manage themselves as long as possible, while at the same time keeping a high quality of life. Physical activity is important to stay fit, and social contact is important for the quality of life. The aim of this chapter is to provide a state-of-the-art of online social exergames for seniors, providing glimpses of senior users' opinions and games limitations. The importance of the motivational techniques is emphasized, as well as the impact that the exergames have to seniors. It contributes to the book objectives focusing on current state and practice in health games for physical training and rehabilitation and the use of gamification, exploring future opportunities and uses of gamification in eHealth and discussing the respective challenges and limitations.


Author(s):  
Stathis Th. Konstantinidis ◽  
Ellen Brox ◽  
Per Egil Kummervold ◽  
Josef Hallberg ◽  
Gunn Evertsen ◽  
...  

The population is getting older, and the resources for care will be even more limited in the future than they are now. There is thus an aim for the society that the seniors can manage themselves as long as possible, while at the same time keeping a high quality of life. Physical activity is important to stay fit, and social contact is important for the quality of life. The aim of this chapter is to provide a state-of-the-art of online social exergames for seniors, providing glimpses of senior users' opinions and games limitations. The importance of the motivational techniques is emphasized, as well as the impact that the exergames have to seniors. It contributes to the book objectives focusing on current state and practice in health games for physical training and rehabilitation and the use of gamification, exploring future opportunities and uses of gamification in eHealth and discussing the respective challenges and limitations.


2017 ◽  
Vol 13 ◽  
pp. 244-261
Author(s):  
Mariola Tracz ◽  
Małgorzata Bajgier-Kowalska ◽  
Radosław Uliszak

Podkarpackie Voivodeship is one of the regions of Poland in which the number of agritourism entities is very high. Therefore tourism plays a significant role in its development strategy. The aim of the paper is to identify the current state of agritourism and the changes that have occurred in the region in the years 2000–2016. Specific objectives are to determine the distribution of agritourism farms and their offer, together with a comprehensive analysis of the environmental and socio-economic factors, as well as the impact of the Slovak-Ukrainian border. The report was developed on the statistical materials from the Polish Central Statistical Office, Podkarpackie Agricultural Advisory Centre in Boguchwała and data collected from municipalities and district offices that is published on their websites, as well as through interviews with 100 owners of agritourism farms in the Podkarpackie Voivodeship. The research has shown, on the one hand, the decline in the number of farms in the region and, on the other hand, the increase in the diversity of the tourist offer of these entities. Distribution of agritourism farms is closely linked to the attractiveness of natural environment and quality of secondary tourism resources. Traditional agritourism has not yet fully used its countryside, as well as cross-border advantages of its location.


Electronics ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 567
Author(s):  
Donghun Yang ◽  
Kien Mai Mai Ngoc ◽  
Iksoo Shin ◽  
Kyong-Ha Lee ◽  
Myunggwon Hwang

To design an efficient deep learning model that can be used in the real-world, it is important to detect out-of-distribution (OOD) data well. Various studies have been conducted to solve the OOD problem. The current state-of-the-art approach uses a confidence score based on the Mahalanobis distance in a feature space. Although it outperformed the previous approaches, the results were sensitive to the quality of the trained model and the dataset complexity. Herein, we propose a novel OOD detection method that can train more efficient feature space for OOD detection. The proposed method uses an ensemble of the features trained using the softmax-based classifier and the network based on distance metric learning (DML). Through the complementary interaction of these two networks, the trained feature space has a more clumped distribution and can fit well on the Gaussian distribution by class. Therefore, OOD data can be efficiently detected by setting a threshold in the trained feature space. To evaluate the proposed method, we applied our method to various combinations of image datasets. The results show that the overall performance of the proposed approach is superior to those of other methods, including the state-of-the-art approach, on any combination of datasets.


Author(s):  
Вячеслав Безъязычный ◽  
Vyacheslav Bezyazychnyy ◽  
Максим Басков ◽  
Maksim Baskov

The impact of cutter wear-resistant coatings upon cutting process parameters and characteristics of surface layer quality in the parts worked: residual stresses, a degree and a depth of work hardening of a surface layer, surface roughness is investigated.


2020 ◽  
Author(s):  
Ali Fallah ◽  
Sungmin O ◽  
Rene Orth

Abstract. Precipitation is a crucial variable for hydro-meteorological applications. Unfortunately, rain gauge measurements are sparse and unevenly distributed, which substantially hampers the use of in-situ precipitation data in many regions of the world. The increasing availability of high-resolution gridded precipitation products presents a valuable alternative, especially over gauge-sparse regions. Nevertheless, uncertainties and corresponding differences across products can limit the applicability of these data. This study examines the usefulness of current state-of-the-art precipitation datasets in hydrological modelling. For this purpose, we force a conceptual hydrological model with multiple precipitation datasets in > 200 European catchments. We consider a wide range of precipitation products, which are generated via (1) interpolation of gauge measurements (E-OBS and GPCC V.2018), (2) combination of multiple sources (MSWEP V2) and (3) data assimilation into reanalysis models (ERA-Interim, ERA5, and CFSR). For each catchment, runoff and evapotranspiration simulations are obtained by forcing the model with the various precipitation products. Evaluation is done at the monthly time scale during the period of 1984–2007. We find that simulated runoff values are highly dependent on the accuracy of precipitation inputs, and thus show significant differences between the simulations. By contrast, simulated evapotranspiration is generally much less influenced. The results are further analysed with respect to different hydro-climatic regimes. We find that the impact of precipitation uncertainty on simulated runoff increases towards wetter regions, while the opposite is observed in the case of evapotranspiration. Finally, we perform an indirect performance evaluation of the precipitation datasets by comparing the runoff simulations with streamflow observations. Thereby, E-OBS yields the best agreement, while furthermore ERA5, GPCC V.2018 and MSWEP V2 show good performance. In summary, our findings highlight a climate-dependent propagation of precipitation uncertainty through the water cycle; while runoff is strongly impacted in comparatively wet regions such as Central Europe, there are increasing implications on evapotranspiration towards drier regions.


2019 ◽  
Vol 4 (1) ◽  
pp. 24
Author(s):  
Dwi Khotimah ◽  
Abdul Salam ◽  
AASP Chandradewi ◽  
Irianto Irianto

Background. Nutrition less in infants is a health problem around the world especially the countries develop. In Indonesia nutritional problems less in toddlers about 19.6%. Nutritional problems have little effect on the low quality of human resources, especially the impact of toddlers who are malnourished by poor brain development, unoptimal physical growth, and metabolic developments (the Kemenkes RI, 2014). The current state of nutrition especially in children is still ematitiate. Given the impact of the nutrient less widespread, it is necessary to do a handling of PMT in the form of sausages using local food that is effective in increasing the weight of children with less nutritional nutrition.Metodelogi. In this study used experimental research Desan with a complete random draft (RAL) One treatment comparison of cork fish with composite flour 75%: 25% 80%: 20% 85%: 15%. Data processing. Processing of data obtained from observations presented in the form of tables, to find out the nature of organoleptic (aroma, flavor, texture and color) in each addition of the sausage making materials processed and analyzed using a statistical analysis of One Way Anova at a trust level of 95% (A = 0.05). If there is a significant impact, the data is analyzed further using the Tukey test to see which treatment is causing the difference. Research results. The comparison of cork fish and composite flour is significant effect on the taste color of texture and aroma. The PMT of Gasuhiru sausage contains 262KKL and 16.72 gr of protein in 100gr. Gasuhiru sausage receiving 83.3% well received.Conclusion: The most liked sausage is a comparison of 85%: 15%. The administration of PMT provides a significant effect on children's weight loss and is 3 times greater than the Conntrol group.


“Slicing tool” or “Slicing Software” computes the intersection curves of models and slicing planes. They improve the quality of the model being printed when given in the form of STL file. Upon analyzing a specimen that has been printed using two different slicing tools, there was a drastic variation on account of the mechanical properties of the specimen. The ultimate tensile strength and the surface roughness of the material vary from one tool to another. This paper reports an investigation and analysis of the variation in the ultimate tensile strength and the surface roughness of the specimen, given that the 3D printer and the model being printed is the same, with a variation of usage of slicing software. This analysis includes ReplicatorG, Flashprint as the two different slicing tools that are used for slicing of the model. The variation in the ultimate tensile strength and the surface roughness are measured and represented statistically through graphs. An appropriate decisive conclusion was drawn on the basis of the observations and analysis of the experiment on relevance to the behavior and mechanical properties of the specimen.


2021 ◽  
Vol 129 ◽  
pp. 01029
Author(s):  
Zuzana Stofkova ◽  
Peter Seemann

Research background: The paper deals with the quality of life and the impact of the pandemic COVID-19 on people’s lives in Slovakia and in selected region. The concept of quality of life and dimensions of quality of life, which are necessary for its evaluation are mentioned, too. It also describes the current state of the issue in Slovakia and abroad on the basis of the selected indicators, where individual countries of the world are compared. Purpose of the article: There are mentioned approaches to quality of life assessment and to conduct a survey of quality of life in a selected region which deals with the development of the quality of life. The paper deals with the analysis of the current state of the problem in Slovakia and abroad. Various definitions of the term quality of life through several authors and views. Methods: Indices in a global and national level for assessment of selected aspects of objective and subjective quality of life in terms of pandemics COVID-19 are mentioned. In order to assess the impact of a pandemic related to COVID-19 on satisfaction of citizens with several aspects of their lives in selected region is analyzed on the basis of an e-survey. Findings & Value added: The result of the article is a comparison of individual indicators of the subjective quality of life in selected EU member states and the Slovak Republic. A survey of the satisfaction of the inhabitants of selected region with selected areas of quality of their lives connected with the COVID-19 pandemic is carried out in order to monitor and evaluate the quality of life at the level of local governments.


Author(s):  
Brendan M. Hickey ◽  
Samuel T. Woo ◽  
Sally F. Shady

Lower limb deficiencies and below knee amputations are the most common form of deficiency that may arise from disease or trauma, and returning a patient close to a normal quality-of-life requires prosthetics, which can be quite challenging. Children present even further difficulty to prosthetists and physicians than adults. Although the underlying prosthetic principles for adults are the same for children, additional considerations must be made for practicality, such as downsizing while maintaining its degree of complexity, and frequent appointments to account for the rapid growth of an adolescent. This review article will evaluate the current state-of-the-art in the field of transtibial-amputee prosthetics, review the insurance coverage a typical family would face, and suggest potential improvements to children’s biomimetic prostheses that aid in reducing the frequency of health care provider intervention.


Sign in / Sign up

Export Citation Format

Share Document