Subfundamental Cycle Switching Frequency Variation for Switching Losses Reduction of a Two-Level Inverter Traction Drive

2017 ◽  
Vol 3 (3) ◽  
pp. 646-655 ◽  
Author(s):  
Subhadeep Bhattacharya ◽  
Sourabh Kumar Sharma ◽  
Diego Mascarella ◽  
Geza Joos
Keyword(s):  
Frequency Variation ◽  
Switching Frequency ◽  
Traction Drive ◽  
Switching Losses

Comparison of Total Losses of 1.2 kV SiC JFET and BJT in DC-DC Converter Including Gate Driver

2011 ◽  
Vol 679-680 ◽  
pp. 649-652 ◽  
Author(s):  
Jang Kwon Lim ◽  
Georg Tolstoy ◽  
Dimosthenis Peftitsis ◽  
Jacek Rabkowski ◽  
Mietek Bakowski ◽  
...  
Keyword(s):  
Threshold Voltage ◽  
Surface Recombination ◽  
Current Gain ◽  
Surface Recombination Velocity ◽  
Switching Frequency ◽  
Switching Losses ◽  
Insulator Interface ◽  
Gate Driver ◽  
Recombination Velocity ◽  
Emitter Junction

The 1.2 kV SiC JFET and BJT devices have been investigated and compared with respect to total losses including the gate driver losses in a DC-DC converter configuration. The buried grid, Normally-on JFET devices with threshold voltage of -50 V and -10V are compared to BJT devices with ideal semiconductor and passivating insulator interface and an interface with surface recombination velocity of 4.5•104 cm/s yielding agreement to the reported experimental current gain values. The conduction losses of both types of devices are independent of the switching frequency while the switching losses are proportional to the switching frequency. The driver losses are proportional to the switching frequency in the JFET case but to a large extent independent of the switching frequency in the BJT case. The passivation of the emitter junction modeled here by surface recombination velocity has a significant impact on conduction losses and gate driver losses in the investigated BJT devices.

Research on Multi-Mode Controller of Switching Power Supply

2014 ◽  
Vol 568-570 ◽  
pp. 1217-1220
Author(s):  
Shu Lin Liu ◽  
Li Li Qi
Keyword(s):  
Power Supply ◽  
Switching Frequency ◽  
Switching Power Supply ◽  
Load Range ◽  
Heavy Load ◽  
Operating Modes ◽  
Switching Power ◽  
Advantages And Disadvantages ◽  
Switching Losses ◽  
Light Load

In order to improve the efficiency of the switching power supply in whole load range, the controller with PWM, PFM and BURST operating modes is designed in this paper, which changes the operation mode automatically according to the load. The operating principle and the advantages and disadvantages of the three operating modes are analyzed and compared. PWM mode is used in heavy load; PFM mode is used in light load to reduce switching losses by reducing the switching frequency and BURST mode is used at the standby time to further reduce switching losses. The main control module is designed and simulation results verify the feasibility of the designed circuit.

scholarly journals Space vector PWM sequence and harmonic comparison for high power current source rectifier

2021 ◽  
Author(s):  
Nagaraja H. Chikkegowda
Keyword(s):  
High Power ◽  
Current Source ◽  
Switching Frequency ◽  
Space Vector Pwm ◽  
Vector Sequence ◽  
Space Vector ◽  
Switching Losses ◽  
Vector Sequences ◽  
Vector Modulation ◽  
A Current

The space vector PWM (SVPWM) schemes for high power current source drives normally produce low order harmonics due to low switching frequency. To provide a SVPWM with the best harmonic performance, different space vector sequences suitable for a current source rectifier (CSR) are investigated in this project. Details on how to achieve the waveform symmetries with minimum switching frequency for each sequence are discussed. A thorough comparison of the harmonic performance of different space vector sequences based on current source rectifier implementations is carried out. An optimum space vector modulation (SVM) method is proposed to achieve the best line current THD and reduced switching losses. The space vector sequence investigation has been verified in simulation and experimentally using a 10kVA GCT based CSR prototype.

scholarly journals Switching Regulation in the Control of 5-Phase Permanent Magnet Synchronous Motor Fed by 3×5 Direct Matrix Converter

2021 ◽  
Vol 23 (1) ◽  
pp. 27-35
Author(s):  
Muhammad Ishaq ◽  
Yanbo Che ◽  
Kifayat Ullah
Keyword(s):  
Permanent Magnet ◽  
Predictive Control ◽  
Permanent Magnet Synchronous Motor ◽  
Synchronous Motor ◽  
Matrix Converter ◽  
Control Technique ◽  
Frequency Regulation ◽  
Frequency Variation ◽  
Switching Frequency ◽  
Output Current

Matrix converter is an AC-AC direct power converter comprising of an array of bi-directional switches. It does not require an intermediate DC-link and allows sinusoidal output waveforms with varying amplitudes and frequencies. The configuration of these bi-directional switches decides the number of inputs and outputs of the matrix converter. This research uses a direct matrix converter (DMC) as a phase-changing device that can convert a three-phase AC voltage into a 5-phase AC voltage. The DMC is modulated with the model predictive control algorithm. The output of DMC is fed to a five-phase permanent magnet synchronous motor (PMSM). The model predictive current control technique for DMC is carried out by developing a mathematical model of an input filter and PM motor used as a load. The predictive control of DMC results in sinusoidal output current, and it also enables the frequency variation in the output current. This frequency variation is useful in controlling the speed of the motor connected to the load. After controlling the 5-phase motor, the switching frequency regulation is done to observe its effect on the motor's stator current waveforms. Switching frequency regulation helps to limit the unnecessary switching of DMC. We developed a MATLAB-based Simulink model to study PMSM, and detailed results are presented. The results show that switching regulation can significantly reduce the switching frequency without compromising the current waveform quality.

scholarly journals A High-Efficiency Three-Level ANPC Inverter Based on Hybrid SiC and Si Devices

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1159 ◽  
Author(s):  
Zhijian Feng ◽  
Xing Zhang ◽  
Jianing Wang ◽  
Shaolin Yu
Keyword(s):  
Silicon Carbide ◽  
High Efficiency ◽  
The Other ◽  
Switching Frequency ◽  
Parallel Operation ◽  
Switching Loss ◽  
Hybrid Scheme ◽  
Excellent Performance ◽  
Switching Losses ◽  
The Cost

Silicon carbide (SiC) devices have excellent performance, such as higher switching frequency and lower switching loss compared with traditional silicon (Si) devices. The application of SiC devices in inverters can achieve higher efficiency and power density. In recent years, the production process of SiC devices has become more mature, but the cost is still several times that of traditional Si devices. In order to balance cost and efficiency, replacing only some of the Si devices with SiC devices in a topology is a better choice. This paper proposed a high-efficiency hybrid active neutral point clamped (ANPC) three-level inverter which has only two SiC devices and the other devices are Si devices. A specific modulation strategy was applied to concentrate switching losses on the SiC devices and reduce the on-state loss through parallel operation during freewheeling intervals. Theoretical efficiency curves and experimental verification of the proposed hybrid scheme with Si-only and SiC-only schemes were carried out.

Synchronized Symmetrical Bus-Clamping PWM Strategies for Three Level Inverter: Applications to Low Switching Frequencies

2011 ◽  
Vol 12 (2) ◽  
Author(s):  
Sreenivasappa Bhupasandra Veeranna ◽  
Udaykumar R Yaragatti ◽  
Abdul R Beig
Keyword(s):  
Pulse Width ◽  
Output Voltage ◽  
High Performance ◽  
Pulse Width Modulation ◽  
Industrial Applications ◽  
Voltage Source ◽  
Switching Frequency ◽  
Space Vector ◽  
Digital Implementation ◽  
Switching Losses

The digital control of three-level voltage source inverter fed high power high performance ac drives has recently become a popular in industrial applications. In order to control such drives, the pulse width modulation algorithm needs to be implemented in the controller. In this paper, synchronized symmetrical bus-clamping pulse width modulation strategies are presented. These strategies have some practical advantages such as reduced average switching frequency, easy digital implementation, reduced switching losses and improved output voltage quality compared to conventional space vector pulse width modulation strategies. The operation of three level inverter in linear region is extended to overmodulation region. The performance is analyzed in terms THD and fundamental output voltage waveforms and is compared with conventional space vector PWM strategies and found that switching losses can be minimized using bus-clamping strategy compared to conventional space vector strategy. The proposed method is implemented using Motorola Power PC 8240 processor and verified on a constant v/f induction motor drive fed from IGBT based inverter.

Load-Adaptive Soft-Switching Energy Recovery Sustainer for Plasma Display

2012 ◽  
Vol 241-244 ◽  
pp. 632-635
Author(s):  
H. L. Do
Keyword(s):  
Theoretical Analysis ◽  
Energy Recovery ◽  
Soft Switching ◽  
Switching Frequency ◽  
Switching Loss ◽  
Switching Characteristic ◽  
Switching Losses ◽  
Plasma Display ◽  
And Performance ◽  
A Current

In this paper, an energy recovery for plasma display is proposed. The proposed energy recovery sustainer provides soft-switching of main sustain switches and reduces the switching loss. Due to soft-switching characteristic, the switching losses of main switches are significantly reduced. In addition, the conduction losses in both main and auxiliary switches are effectively reduced by varying a current build-up time according to image patterns. Theoretical analysis and performance of the proposed energy recovery sustain driver were verified on an experimental prototype operating at 200 kHz switching frequency.

Research on the High Frequency Realization of High-Power Inverter

2011 ◽  
Vol 383-390 ◽  
pp. 1077-1083
Author(s):  
Run Hua Liu ◽  
Gang Wang
Keyword(s):  
High Power ◽  
High Frequency ◽  
Output Voltage ◽  
Harmonic Distortion ◽  
Soft Switching ◽  
Multilevel Inverter ◽  
Switching Frequency ◽  
Switching Losses ◽  
Simulation And Experiment

The paper presents the inverter method which based on cascade multilevel inverter and MOSFET-assisted soft-switching of IGBT and modulation strategy against the double requirement of high-power inverter and high frequency. The method can effectively improve the output voltage, reduce harmonic distortion and switching losses, improve the switching frequency and meet the double requirement of the high-power inverter and high frequency. The method proved to be feasible by simulation and experiment.

Sign in / Sign up

Export Citation Format

Share Document