Wideband Aperture-Coupled Dielectric Resonator Antenna at 5.8 GHz

2014 ◽  
Vol 69 (1) ◽  
Author(s):  
Mohd Haizal Jamaluddin ◽  
Guan Chai Eu ◽  
Sharul Kamal Abdul Rahim ◽  
Nur Izyani Dzulkipli

In this paper, a wideband aperture coupled dielectric resonator antenna (DRA) is presented using a rectangular dielectric resonator to increase operational bandwidth. By choosing a suitable combination of the DRA shape and slot, the resonance frequency from the aperture and DRA can be merged to achieve wideband frequency response without comprising antenna radiation efficiency and polarization. Effects of varying parameter in DRA size, slot dimension and feedline length on return-loss bandwidth are analysed.  The proposed technique yields 43% bandwidth in simulation and 21% bandwidth in measurement.

In this article, a novel offset microstrip line feed Rectangular Dielectric Resonator Antenna is used for bandwidth enhancement. The parameters such as Bandwidth, Return Loss and Radiation efficiency are improved in the proposed antenna. A comparison is also shown for the proposed feed structure with and without conformal strips. The improvement in the bandwidth is observed from 25% to 65% by optimizing the antenna design parameters. It works in three frequency bands, that is, 2.03-3.69 GHz, 3.86-7.26 GHz, and 7.32-9.26 GHz. The proposed antenna is appropriate for WIMAX/WLAN applications.


Author(s):  
Irfan Ali ◽  
Mohd Haizal Jamaluddin ◽  
Abinash Gaya

<span>In this paper, Microstrip slot aperture and Microstrip line feeding techniques of dielectric resonator antenna are investigated and examined at 26 GHz for 5G applications. The dielectric resonator has a dielectric constant of 10 and etched on Rogers RT/Duroid 5880 substrate having a thickness of 0.254mm and relative permittivity of 2.2. The proposed structures are optimized and simulated using the commercial software CST Microwave studio. The effect of feeding techniques on the bandwidth, radiation efficiency, gain, VSWR and radiation pattern are also examined and analysed. The return loss, bandwidth, gain, radiation efficiency, VSWR and radiation pattern are presented and compared based on the excitation method employed for the studied DRA. The simulated results show that the microstrip slot aperture provides good performance and is suitable for 5G applications.</span>


2021 ◽  
Author(s):  
Ashok kumar ◽  
Rajveer Singh Yaduvanshi

Abstract In this article Spherical DRA has been formulated , simulated and proto type developed. The detailed theoretical analysis along with simulations and measured results at 5.8 GHz have been presented in this article. The SDRA at 5.8 GHz covering 5G frewuenci band. The proposed design antenna provides the gain of 7.3 dB and return loss -25 dB. The measured results are in good match with simulated result. The proposed SDRA are good for 5G wireless networks, as well as other sub-6 band in wireless communication systems.


Author(s):  
S. Salihah ◽  
M. H. Jamaluddin ◽  
R. Selvaraju ◽  
M. N. Hafiz

In this article, a Multiple-Input-Multiple-Output (MIMO) H-shape Dielectric Resonator Antenna (DRA) is designed and simulated at 2.6 GHz for 4G applications. The proposed structure consists of H-shape DRA ( =10) which is mounted on FR4 substrate ( =4.6), and feed by two different feeding mechanisms. First, microstrip with slot coupling as Port 1. Second, coaxial probe as Port 2. The electrical properties of the proposed MIMO H-shape DRA in term of return loss, bandwidth and gain are completely obtained by using CST Microwave Studio Suite Software. The simulated results demonstrated a return loss more than 20 dB, an impedance bandwidth of 26 % (2.2 – 2.9 GHz), and gain of 6.11 dBi at Port 1. Then, a return loss more than 20 dB, an impedance bandwidth of 13 % (2.2 – 2.7 GHz), and gain of 6.63 dBi at Port 2. Both ports indicated impedance bandwidth more than 10 %, return loss lower than 20 dB, and gain more than 10 dBi at 2.6 GHz. The simulated electrical properties of the proposed design show a good potential for LTE applications.


2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Ke Gong ◽  
Xue Hui Hu ◽  
Peng Hu ◽  
Bing Jie Deng ◽  
You Chao Tu

A series-fed linear substrate-integrated dielectric resonator antenna array (SIDRAA) is presented for millimeter-wave applications, in which the substrate-integrated dielectric resonator antenna (SIDRA) elements and the feeding structure can be codesigned and fabricated using the same planar process. A prototype 4 × 1 SIDRAA is designed at Ka-band and fabricated with a two-layer printed circuit board (PCB) technology. Four SIDRAs are implemented in the Rogers RT6010 substrate using the perforation technique and fed by a compact substrate-integrated waveguide (SIW) through four longitudinal coupling slots within the Rogers RT5880 substrate. The return loss, radiation patterns, and antenna gain were experimentally studied, and good agreement between the measured and simulated results is observed. The SIDRAA example provides a bandwidth of about 10% around 34.5 GHz for 10 dB return loss and stable broadside radiation patterns with the peak gain of 10.5–11.5 dBi across the band.


Frequenz ◽  
2014 ◽  
Vol 0 (0) ◽  
Author(s):  
Arshad Mehmood ◽  
Yuliang Zheng ◽  
Hubertus Braun ◽  
Martun Hovhannisyan ◽  
Martin Letz ◽  
...  

AbstractThis paper presents the application of new high permittivity and low loss glass material for antennas. This glass material is transparent. A very simple rectangular dielectric resonator antenna is designed first with a simple microstrip feeding line. In order to widen the bandwidth, the feed of the design is modified by forming a T-shaped feeding. This new design enhanced the bandwidth range to cover the WLAN 5 GHz band completely. The dielectric resonator antenna cut into precise dimensions is placed on the modified microstrip feed line. The design is simple and easy to manufacture and also very compact in size of only 36 × 28 mm. A −10 dB impedance bandwidth of 18% has been achieved, which covers the frequency range from 5.15 GHz to 5.95 GHz. Simulations of the measured return loss and radiation patterns are presented and discussed.


Author(s):  
Devansh Sinha ◽  
Mohit Vyas ◽  
Sanjay Singh Kushwah

In this paper a Dielectric resonator antenna (DRA) consists of a rectangular geometry and a printed rectangular patch on top of it in order to achieve better performance and operation without significant increase in antenna size. DRA structure is proposed at a height of 2 mm from the ground plane and patch incorporated at the height of 3.638 mm. This work is mainly focused on increasing the potential parameters of DRA and analyze high frequency band. The proposed antenna is designed to resonate at 25 GHz and by varying the DRA size ‘a, then the simulated results shows variation in Return Loss. The impedance bandwidth of the DRA (23.417 GHz-26.961 GHz) and return loss is 26.543951dB.The proposed DRA is analyzed and design using CST-MSW (2010). The simulated result shows the Far field, smith chart. We have estimated the wavelength, frequency, bandwidth, Return loss and directivity.                                      


2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
M. Kamran Saleem ◽  
M. Abdel-Rahman ◽  
Majeed Alkanhal ◽  
Abdelrazik Sebak

A novel antenna-coupled sensor configuration for millimeter wave detection is presented. The antenna is based on two cylindrical dielectric resonators (CDRs) excited by rectangular slots placed below the CDRs. TheHEM11Δmode resonating at 94 GHz is generated within the CDRs and a 3 GHz impedance bandwidth is achieved at center frequency of 94 GHz. The simulated antenna gain is 7.8 dB, with a radiation efficiency of about 40%.


Sign in / Sign up

Export Citation Format

Share Document