Estimating Road Angles With the Knowledge of the Vehicle Yaw Angle

2010 ◽  
Vol 132 (3) ◽  
Author(s):  
Ling-Yuan Hsu ◽  
Tsung-Lin Chen
Keyword(s):  
Vehicle Dynamics ◽  
Longitudinal Velocity ◽  
Lateral Acceleration ◽  
Vehicle Body ◽  
Estimation Accuracy ◽  
The Road ◽  
Displacement Sensors ◽  
State Observers ◽  
Acceleration Sensors ◽  
Yaw Angle

This paper presents a method of estimating road angles using state observers and three types of sensors (lateral acceleration sensors, longitudinal velocity sensors, and suspension displacement sensors). The proposed method differs from those in most existing literature in three aspects. First, a “full-state” vehicle model is used to describe nonlinear vehicle dynamics on a sloped road. Second, “switching observer” techniques are used to suggest suitable sensors and to construct state observers. Lastly, the road angles are described by three Euler angles, and two of them are estimated simultaneously. The analysis indicates that (1) road angles affect vehicle dynamics through components of the gravitational force acting on the vehicle body. These gravitational forces can be correctly estimated with an estimation accuracy less than 7.5%, even when road angles vary with time. (2) Those road angles can be correctly estimated only when the vehicle yaw angle is known.

Road wetness quantification via tyre spray

2018 ◽  
Vol 233 (1) ◽  
pp. 28-37 ◽  
Author(s):  
Bernhard Schmiedel ◽  
Frank Gauterin ◽  
Hans-Joachim Unrau
Keyword(s):  
Vehicle Dynamics ◽  
Autonomous Vehicles ◽  
Water Film ◽  
Significant Loss ◽  
Vehicle Speed ◽  
The Road ◽  
Acceleration Sensors ◽  
On The Road ◽  
Wheel Arch

Road wetness can lead to a significant loss in tyre traction. Although a driver can easily distinguish between dry and wet roads, the thickness of a water film on the road (wetness) and its impact on the vehicle dynamics are more difficult for a driver to classify. Furthermore, autonomous vehicles also need a graded classification of road conditions. There are known sensors, which are able to classify road conditions, but these are either not able to quantify the road wetness or are not suitable for mass production. Therefore, this work analyses a method to measure the road wetness by analysing tyre spray with plain acceleration sensors at positions like wheel arch liner or side skirt. It discusses influences of vehicle speed, road wetness, tyres, road structure and sensor positioning. The results show that a quantification of road wetness is possible, but it relies on the sum of all boundary conditions.

Lateral obstacle avoidance control based on driving behavior recognition of the preceding vehicles in adjacent lanes

2020 ◽  
Vol 68 (10) ◽  
pp. 880-892
Author(s):  
Youguo He ◽  
Xing Gong ◽  
Chaochun Yuan ◽  
Jie Shen ◽  
Yingkui Du
Keyword(s):  
Obstacle Avoidance ◽  
Lateral Displacement ◽  
Longitudinal Velocity ◽  
Driving Behavior ◽  
Lateral Acceleration ◽  
Lateral Motion ◽  
Behavior Recognition ◽  
Dynamic Surface ◽  
Lane Changing ◽  
The Impact

AbstractThis paper proposes a lateral lane change obstacle avoidance constraint control simulation algorithm based on the driving behavior recognition of the preceding vehicles in adjacent lanes. Firstly, the driving behavior of the preceding vehicles is recognized based on the Hidden Markov Model, this research uses longitudinal velocity, lateral displacement and lateral velocity as the optimal observation signals to recognize the driving behaviors including lane-keeping, left-lane-changing or right-lane-changing; Secondly, through the simulation of the dangerous cutting-in behavior of the preceding vehicles in adjacent lanes, this paper calculates the ideal front wheel steering angle according to the designed lateral acceleration in the process of obstacle avoidance, designs the vehicle lateral motion controller by combining the backstepping and Dynamic Surface Control, and the safety boundary of the lateral motion is constrained based on the Barrier Lyapunov Function; Finally, simulation model is built, and the simulation results show that the designed controller has good performance. This active safety technology effectively reduces the impact on the autonomous vehicle safety when the preceding vehicle suddenly cuts into the lane.

scholarly journals Striated Tire Yaw Marks—Modeling and Validation

Energies ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 4309
Author(s):  
Wojciech Wach ◽  
Jakub Zębala
Keyword(s):  
Vehicle Dynamics ◽  
Linear Equations ◽  
Tire Model ◽  
Vehicle Accidents ◽  
The Road ◽  
Variable Curvature ◽  
Macro Scale ◽  
On The Road ◽  
Multi Body ◽  
Non Linear Equations

Tire yaw marks deposited on the road surface carry a lot of information of paramount importance for the analysis of vehicle accidents. They can be used: (a) in a macro-scale for establishing the vehicle’s positions and orientation as well as an estimation of the vehicle’s speed at the start of yawing; (b) in a micro-scale for inferring among others things the braking or acceleration status of the wheels from the topology of the striations forming the mark. A mathematical model of how the striations will appear has been developed. The model is universal, i.e., it applies to a tire moving along any trajectory with variable curvature, and it takes into account the forces and torques which are calculated by solving a system of non-linear equations of vehicle dynamics. It was validated in the program developed by the author, in which the vehicle is represented by a 36 degree of freedom multi-body system with the TMeasy tire model. The mark-creating model shows good compliance with experimental data. It gives a deep view of the nature of striated yaw marks’ formation and can be applied in any program for the simulation of vehicle dynamics with any level of simplification.

scholarly journals Vehicle Sideslip Angle Estimation Using Two Single-Antenna GPS Receivers

2010 ◽  
Author(s):  
Jong-Hwa Yoon ◽  
Huei Peng
Keyword(s):  
Low Cost ◽  
Longitudinal Velocity ◽  
Stability Control ◽  
Estimation Accuracy ◽  
Measurement Unit ◽  
Sideslip Angle ◽  
Gps Receivers ◽  
Single Antenna ◽  
Active Safety Systems ◽  
Safety Systems

Knowing vehicle sideslip angle accurately is critical for active safety systems such as Electronic Stability Control (ESC). Vehicle sideslip angle can be measured through optical speed sensors, or dual-antenna GPS. These measurement systems are costly (∼$5k to $100k), which prohibits wide adoption of such systems. This paper demonstrates that the vehicle sideslip angle can be estimated in real-time by using two low-cost single-antenna GPS receivers. Fast sampled signals from an Inertial Measurement Unit (IMU) compensate for the slow update rate of the GPS receivers through an Extended Kalman Filter (EKF). Bias errors of the IMU measurements are estimated through an EKF to improve the sideslip estimation accuracy. A key challenge of the proposed method lies in the synchronization of the two GPS receivers, which is achieved through an extrapolated update method. Analysis reveals that the estimation accuracy of the proposed method relies mainly on vehicle yaw rate and longitudinal velocity. Experimental results confirm the feasibility of the proposed method.

On the Road Profile Estimation from Vehicle Dynamics Measurements

2021 ◽  
Author(s):  
Angelo Domenico Vella ◽  
Antonio Tota ◽  
Alessandro Vigliani
Keyword(s):  
Vehicle Dynamics ◽  
The Road ◽  
Road Profile ◽  
On The Road ◽  
Profile Estimation

scholarly journals Characterization of Road Condition with Data Mining Based on Measured Kinematic Vehicle Parameters

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Johannes Masino ◽  
Jakob Thumm ◽  
Guillaume Levasseur ◽  
Michael Frey ◽  
Frank Gauterin ◽  
...  
Keyword(s):  
Data Mining ◽  
Support Vector ◽  
Matlab Toolbox ◽  
Data Set ◽  
The Road ◽  
Acceleration Sensors ◽  
Road Surfaces ◽  
Road Condition ◽  
Sensor Signals

This work aims at classifying the road condition with data mining methods using simple acceleration sensors and gyroscopes installed in vehicles. Two classifiers are developed with a support vector machine (SVM) to distinguish between different types of road surfaces, such as asphalt and concrete, and obstacles, such as potholes or railway crossings. From the sensor signals, frequency-based features are extracted, evaluated automatically with MANOVA. The selected features and their meaning to predict the classes are discussed. The best features are used for designing the classifiers. Finally, the methods, which are developed and applied in this work, are implemented in a Matlab toolbox with a graphical user interface. The toolbox visualizes the classification results on maps, thus enabling manual verification of the results. The accuracy of the cross-validation of classifying obstacles yields 81.0% on average and of classifying road material 96.1% on average. The results are discussed on a comprehensive exemplary data set.

LATERAL MOVEMENT OF VEHICLES UNDER WEAK-LANE DISCIPLINE HETEROGENEOUS TRAFFIC

2016 ◽  
Vol 78 (4) ◽  
Author(s):  
Geetimukta Mahapatra ◽  
Akhilesh Kumar Maurya ◽  
Anil Minhans
Keyword(s):  
Vehicle Dynamics ◽  
Important Variable ◽  
Heterogeneous Traffic ◽  
Lateral Acceleration ◽  
Initial Increase ◽  
Lateral Movement ◽  
Traffic Condition ◽  
Safe Driving ◽  
Different Types ◽  
Road Geometry

Safe driving can be achieved by prevention of risky situations which requires the knowledge of the vehicle dynamics and road geometry. The Indian traffic condition is heterogeneous in nature and has weak lane discipline. Hence, vehicles interactions takes place laterally also along with their longitudinal interaction. Vehicles lateral movements (interactions) are quite high due to absence of lane discipline. Therefore, the lateral acceleration of vehicles are an important variable which characterizes the corresponding vehicle dynamics. Several studies have been done by various authors on lateral acceleration in curves, however, lateral movement study of vehicles on straight road section is also important to analyze vehicles’ maneuver in such traffic (i.e. traffic stream with weak lane discipline). Therefore, the present study is about the observation of lateral movements of vehicles over different types of roads in three metropolitan cities of India (Kolkata, Mumbai and Pune) under moderate traffic conditions. Lateral acceleration variation of five different types of vehicles (SUV cars, Sedan cars, Hutch Back cars, motorized three wheeler and two wheeler) have been recorded to investigate its relationship with vehicles longitudinal characteristics (i.e. longitudinal speed) in Indian heterogeneous and weak lane disciplined traffic. Lateral acceleration values quickly rises with initial increase in speed afterward lateral acceleration values reduces with further increase in vehicles longitudinal speed.  Impact of vehicle type and locations on the lateral maneuvering of vehicles have also been studied

scholarly journals Mathematical Modelling of Two-Wheeler Suspension system in a wavy road

2019 ◽  
Vol 8 (11) ◽  
pp. 3630-3635
Keyword(s):  
Ride Comfort ◽  
Health Hazard ◽  
Suspension System ◽  
Vehicle Body ◽  
Continuous Exposure ◽  
Potential Health ◽  
Suspension Spring ◽  
The Road ◽  
Potential Health Hazard ◽  
Two Wheeler

Two wheelers like motorbikes and scooters are one of the major transports in India. In major cities and towns, it is most common private transport as it is fast and easy approach to the destination. But the prolonged drive in the two-wheeler leads to the potential health hazard and musco-skeletal disorder due to continuous exposure to the vibration caused during the ride and force transmitted to the vehicle body due to road irregularities. It is a challenge of automobile engineers to design a promising suspension system to overcome the risk of ride comfort during continuous driving. In this research, two-wheeler suspension system is modelled with a condition of bump and valley in a wavy road. The road surface is assumed to be wavy and the response of new suspension spring with different materials (stainless steel, tungsten and polymeric) along with viscous damper is analyzed and compared. By this analysis, it will be proposed to industry to modify the suspension system to improve its efficiency and reduce force transmitted to the human body to improve the ride comfort

scholarly journals Adhesion state estimation based on improved tire brush model

2018 ◽  
Vol 10 (1) ◽  
pp. 168781401774770
Author(s):  
Bei Shaoyi ◽  
Li Bo ◽  
Zhu Yanyan
Keyword(s):  
Lateral Force ◽  
Longitudinal Force ◽  
Lateral Acceleration ◽  
Stable Range ◽  
The Road ◽  
Nonlinear Compensation ◽  
The Stability ◽  
Standard Calculation ◽  
Double Nonlinear ◽  
Brush Model

On the basis of calculating the longitudinal force using the original brush model, we simplify the tire structure and consider the lateral force generated by the lateral elasticity of the tread. At the same time, the boundary conditions between the adhesion area and the slip zone in the contact area of the tire are fully discussed. By establishing an improved tire brush model, the error caused by neglecting the sideslip characteristics is avoided, and the adaptability of the tire model is improved. A double nonlinear compensation method based on the lateral acceleration deviation and the yaw rate deviation is employed to estimate the road adhesion coefficient, which is closer to the actual attachment situation than the standard calculation. Based on this model, the vehicle stability coefficient k is defined and calculated to describe the stability of the vehicle during the driving process. The modeling results show that the value of k is always in the stable range of [0, 1]. Therefore, the vehicle that utilizes the improved tire brush model is always within the controllable range in the driving process, which verifies the effectiveness of the model.

scholarly journals Sliding Mode Control of Laterally Interconnected Air Suspensions

2020 ◽  
Vol 10 (12) ◽  
pp. 4320 ◽  
Author(s):  
Dou Guowei ◽  
Yu Wenhao ◽  
Li Zhongxing ◽  
Amir Khajepour ◽  
Tan Senqi
Keyword(s):  
Ride Comfort ◽  
Control Method ◽  
Sliding Mode ◽  
Suspension System ◽  
Lateral Acceleration ◽  
Sliding Mode Controller ◽  
The Road ◽  
Air Suspension ◽  
Simulation Based ◽  
Different Levels

This paper presents a control method based the lateral interconnected air suspension system, in order to improve the road handling of vehicles. A seven-DOF (Degree of freedom) full-vehicle model has been developed, which considers the features of the interconnected air suspension system, for example, the modeling of the interconnected pipelines and valves by considering the throttling and hysteresis effects. On the basis of the well-developed model, a sliding mode controller has been designed, with a focus on constraining and minimizing the roll motion of the sprung mass caused by the road excitations or lateral acceleration of the vehicle. Moreover, reasonable road excitations have been generated for the simulation based on the coherence of right and left parts of the road. Afterwards, different simulations have been done by applying both bumpy and random road excitations with different levels of roughness and varying vehicle lateral accelerations. The simulation results indicate that the interconnected air suspension without control can improve the ride comfort, but worsen the road handling performance in many cases. However, by applying the proposed sliding mode controller, the road handling of the sprung mass can be improved by 20% to 85% compared with the interconnected or non-interconnected mode at a little cost of comfort.

Sign in / Sign up

Export Citation Format

Share Document