The Calibration of Thermocouples by Freezing-Point Baths and Empirical Equations

1959 ◽  
Vol 81 (2) ◽  
pp. 177-188 ◽  
Author(s):  
R. P. Benedict
Keyword(s):  
Digital Computer ◽  
High Speed ◽  
Freezing Point ◽  
Individual Characteristics ◽  
Empirical Equations ◽  
Test Results ◽  
Calibration System ◽  
Temperature Range ◽  
Experimental Values ◽  
The Individual

A calibration system is described which is based on the use of a few precisely determined experimental values obtained from freezing-point baths. Characteristics of the individual thermocouples at intermediate points are obtained by passing empirical equations of prescribed form through the test values. A program is reviewed, by which a high-speed digital computer accomplishes the necessary conversions, curve fittings, comparisons of individual characteristics with arbitrary reference tables, and the printing out of a table of differences. Test results for a series of iron-constantan thermocouples, over the temperature range 32–1225 F, are presented to illustrate the use of the system and the uncertainties involved. Comparisons are drawn between these results and those obtained by other methods.

Verification of Compressor Data Accuracy by Uncertainty Analysis and Testing Methods

1988 ◽  
Vol 110 (2) ◽  
pp. 265-269 ◽  
Author(s):  
N. D. Poti ◽  
D. C. Rabe
Keyword(s):  
Uncertainty Analysis ◽  
Spatial Variation ◽  
Air Force ◽  
Test Results ◽  
General Electric Company ◽  
Transonic Compressor ◽  
Air Force Base ◽  
Experimental Values ◽  
The Individual

A transonic compressor designed and instrumented by the General Electric Company was recently evaluated during several test programs in the Compressor Research Facility at Wright-Patterson Air Force Base. An analytical uncertainty analysis was performed for the individual measurements, as well as the calculated performance parameters. During the tests, the experimental values of precision uncertainty were compared to the analytical predictions. The spatial variation of the individual discharge measurements was evaluated for its effect on the uncertainty of the measured parameters and calculated performance. Through the comparison of the analytical and measured uncertainty and the evaluation of spatial variation, a final uncertainty of the measured performance is presented, and the overall quality of the test results is assessed. Through these data reviews, a more accurate understanding of the performance of the test compressor is obtained.

Second Virial Coefficient of the 2cLJ, 3cLJ and 4cLJ Molecules

1994 ◽  
Vol 59 (4) ◽  
pp. 756-767 ◽  
Author(s):  
Tomáš Boublík
Keyword(s):  
Virial Coefficient ◽  
Second Virial Coefficient ◽  
Temperature Range ◽  
Lennard Jones ◽  
Pair Potentials ◽  
Error Bars ◽  
Experimental Values ◽  
The Individual

The second virial coefficient was evaluated for the two-centre, three-centre and four-centre Lennard Jones molecules with the site site distance l ∈ (0,1) at the reduced temperatures Tr = 0.6 - 3.0. The obtained data are correlated by an expression derived originally for the Kihara non-spherical molecules; the same value of the σ-parameter is considered for the both pair potentials whereas εKihara/εncLJ and lKihara / lncLJ vary with the increasing values of lncLJ. Values of the virial coefficient of the individual ncLJ molecules agree within error bars with experimental values in the whole temperature range studied; with only slightly higher deviations also data for the single 2cLJ, 3cLJ and 4cLJ molecules for all the lncLJ values can be correlated.

ON A SUCCESSIVE APPROXIMATION METHOD FOR INTERPRETING GRAVITY ANOMALIES

Geophysics ◽  
1960 ◽  
Vol 25 (6) ◽  
pp. 1215-1228 ◽  
Author(s):  
Z. Frankenberger Danes
Keyword(s):  
Digital Computer ◽  
High Speed ◽  
Gulf Coast ◽  
Gravity Anomalies ◽  
Whole Body ◽  
Successive Approximations ◽  
Successive Approximation Method ◽  
Numerical Work ◽  
Salt Domes ◽  
The Individual

A new method for quantitative interpretation of gravity anomalies is presented. The disturbing body is represented by a finite number of vertical prisms arranged on a pre‐determined, regular grid. The horizontal dimensions of the individual prisms are small enough that they can be approximated by vertical‐line mass elements at the axis of the prisms. Formulas for gravity due to one prism are derived and, for the case of Gulf Coast salt densities, plotted on Figure 1. Gravity due to the whole body is an algebraic sum of the contributions of all prisms at the appropriate depths and distances. This method makes possible the direct interpretation by successive approximations by introducing proper geologic limitations. All the numerical work can be conveniently done on a high‐speed digital computer. The method is especially suitable for features with predominant vertical dimension such as salt domes and igneous plugs. It gives at least the same, and possibly higher, degree of accuracy as the graphical dot chart methods and, carried out on a digital computer, should be about two thousand times faster.

THE METHODS OF DEVELOPING COMPUTATIONAL THINKING OF STUDENTS WHILE STUDYING THE COURSE "NUMERICAL METHODS" BASED ON BLENDED LEARNING

2019 ◽  
pp. 34-41
Author(s):  
M. M. Klunnikova
Keyword(s):  
Numerical Methods ◽  
Blended Learning ◽  
Computational Thinking ◽  
Individual Characteristics ◽  
Diagnostic Model ◽  
Mathematics Students ◽  
Professional Activities ◽  
Cognitive Component ◽  
Professional Field ◽  
The Individual

The work is devoted to the consideration of improving the quality of teaching students the discipline “Numerical methods” through the development of the cognitive component of computational thinking based on blended learning. The article presents a methodology for the formation of computational thinking of mathematics students, based on the visualization of algorithmic design schemes and the activation of the cognitive independence of students. The characteristic of computational thinking is given, the content and structure of computational thinking are shown. It is argued that a student with such a mind is able to manifest himself in his professional field in the best possible way. The results of the application of the technique are described. To determine the level of development of the cognitive component of computational thinking, a diagnostic model has been developed based on measuring the content, operational and motivational components. It is shown that the proposed method of developing computational thinking of students, taking into account the individual characteristics of students’ thinking, meaningfully based on the theoretical and practical aspects of studying the discipline, increases the effectiveness of learning the course “Numerical methods”. The materials of the article are of practical value for teachers of mathematical disciplines who use information and telecommunication technologies in their professional activities.

MEDIA SOCIALIZATION OF PERSONALITY IN THE CONTEXT OF INMUTATION IN THE MASS MEDIA

2021 ◽  
pp. 104-109
Author(s):  
Chernysh O.O.
Keyword(s):  
Mass Media ◽  
Negative Impact ◽  
Effective Interaction ◽  
Individual Characteristics ◽  
Media Culture ◽  
Active Growth ◽  
Media Space ◽  
The Media ◽  
The Individual

The urgency of the researched problem is connected with the growing role of mass media in modern conditions leads to change of values and transformation of identity of the person. The active growth of the role of the media, their influence on the formation and development of personality leads to the concept of “media socialization” and immutation in the media. The aim of the study is to outline the possibilities of the process of media socialization in the context of immutation in the media. The methods of our research are: analysis of pedagogical, psychological, literature, synthesis, comparison, generalization. The article analyzes the views of domestic and foreign scientists on the problem of immutation in the media and the transformation of the information space. In the context of the mass nature of the immutation of society, the concept of “media socialization” becomes relevant, which is the basis for reducing the negative impact of the media on the individual.The author identifies the lack of a thorough study of the concept of “media socialization” in modern scientific thought. Thus, media socialization is associated with the transformation of traditional means of socialization, and is to assimilate and reproduce the social experience of mankind with the help of new media.The article analyzes the essence of the concepts “media space”, “mass media” and “immutation”. The influence of mass media on the formation and development of the modern personality is described in detail.The study concluded that it is necessary to form a media culture of the individual, to establish safe and effective interaction of young people with the modern media system, the formation of media awareness, media literacy and media competence in accordance with age and individual characteristics for successful media socialization. The role of state bodies in solving the problem of media socialization of the individual was also determined. It is determined that the process of formation of media culture in youth should take place at the level of traditional institutions of socialization of the individual.The author sees the prospect of further research in a detailed analysis and study of the potential of educational institutions as an institution and a means of counteracting the mass nature of the immutation of society.Key words: immutation, media socialization, mass media, media space, information.

Formation of Standing Waves in Radial Tires

1984 ◽  
Vol 12 (1) ◽  
pp. 44-63 ◽  
Author(s):  
Y. D. Kwon ◽  
D. C. Prevorsek
Keyword(s):  
High Speed ◽  
Critical Speed ◽  
Unit Length ◽  
Standing Waves ◽  
Rolling Resistance ◽  
Damping Coefficient ◽  
Circular Membrane ◽  
Critical Speeds ◽  
Steel Cord ◽  
The Individual

Abstract Radial tires for automobiles were subjected to high speed rolling under load on a testing wheel to determine the critical speeds at which standing waves started to form. Tires of different makes had significantly different critical speeds. The damping coefficient and mass per unit length of the tire wall were measured and a correlation between these properties and the observed critical speed of standing wave formation was sought through use of a circular membrane model. As expected from the model, desirably high critical speed calls for a high damping coefficient and a low mass per unit length of the tire wall. The damping coefficient is particularly important. Surprisingly, those tire walls that were reinforced with steel cord had higher damping coefficients than did those reinforced with polymeric cord. Although the individual steel filaments are elastic, the interfilament friction is higher in the steel cords than in the polymeric cords. A steel-reinforced tire wall also has a higher density per unit length. The damping coefficient is directly related to the mechanical loss in cyclic deformation and, hence, to the rolling resistance of a tire. The study shows that, in principle, it is more difficult to design a tire that is both fuel-efficient and free from standing waves when steel cord is used than when polymeric cords are used.

DECISION-MAKING ON INVESTMENT OF IT-INNOVATION BASED ON FUZZY EXPERT INFORMATION

2018 ◽  
pp. 103-111
Author(s):  
Olga Olegovna Eremenko ◽  
Lyubov Borisovna Aminul ◽  
Elena Vitalievna Chertina
Keyword(s):  
Decision Making ◽  
Individual Characteristics ◽  
Production Model ◽  
Investment Management ◽  
It Projects ◽  
Product Model ◽  
Project Cost ◽  
Reasoning System ◽  
Managerial Decisions ◽  
The Individual

The subject of the research is the process of making managerial decisions for innovative IT projects investing. The paper focuses on the new approach to decision making on investing innovative IT projects using expert survey in a fuzzy reasoning system. As input information, expert estimates of projects have been aggregated into six indicators having a linguistic description of the individual characteristics of the project type "high", "medium", and "low". The task of decision making investing has been formalized and the term-set of the output variable Des has been defined: to invest 50-75% of the project cost; to invest 20-50% of the project cost; to invest 10-20% of the project cost; to send the project for revision; to turn down investing project. The fuzzy product model of making investment management decisions has been developed; it adequately describes the process of investment management. The expediency of using constructed production model on a practical example is shown.

THEORETICAL PRINCIPLES OF FORECASTING THE COST OF A SOFTWARE PRODUCT

2017 ◽  
Author(s):  
Pavlo Rodionov ◽  
◽  
Anna Ploskonos ◽  
Lesya Gavrutenko ◽  
◽  
...  
Keyword(s):  
Selection Process ◽  
Individual Characteristics ◽  
Successful Implementation ◽  
Software Products ◽  
Software Product ◽  
Continue Research ◽  
Cocomo Model ◽  
Factors Of Influence ◽  
The Individual ◽  
The Cost

The paper analyzes the factors that affect the amount of effort required to create a mobile application and its cost. It is established that the main factors of influence are the design of the application, its functionality, the type of mobile platform, the availability and level of testing and support, as well as the individual characteristics of the developer. Based on the analysis of information sources, the main methods and approaches to forecasting the cost of software products are identified, which include the COCOMO model, Price-to-win method, expert evaluation, algorithmic methods and the method of analogies. It is proposed to consider the method of analogies as a tool that allows you to make predictions about the cost of resources required for the successful implementation of IT projects based on the experience of similar projects. It is proved that the advantages of this method are the simplicity of its implementation and the clarity of the results obtained, which follows from the practical orientation of this tool. Among the limitations of the method of analogy is the mandatory need for reliable data relating to similar projects, as well as the difficulty of taking into account unspecified indicators. Taking into account the mentioned limitations of the method of analogies and on the basis of the analysis of scientific sources the possible directions of its optimization are determined. Thus, among the ways to improve the effectiveness of this method are those aimed at optimizing the project selection process, the data for which are used as a basis for forecasting. Attempts to improve the method of analogies by including parameters that were previously ignored by this technique seem promising. This in turn can lead to an expansion of the scope of the method of analogies and increase the accuracy of forecasts. As prospects for further research, the need to continue research in the field of optimization of the method of analogies with the subsequent practical verification of theoretical positions on the data of real projects.

Sign in / Sign up

Export Citation Format

Share Document