Stability and Robustness Analysis of Uncertain Nonlinear Systems Using Entropy Properties of Left and Right Singular Vectors

2017 ◽  
Vol 139 (3) ◽  
Author(s):  
Young Kap Son ◽  
Gordon J. Savage

This paper presents a novel approach to determine the stability space of nonlinear, uncertain dynamic systems that obviates the traditional eigenvalue approach and the accompanying linearizing approximations. In the new method, any long-term dynamic uncertainty is used in an extremely simple and economical way. First, the variability of the design variables about a particular design point is captured through the design of experiments (DOE). Then, corresponding computer simulations of the mechanistic model, over only a small time span, provide a matrix of discrete time responses. Finally, singular value decomposition (SVD) separates out parameter and time information and the expected uncertainty of the first few left and right singular vectors predicts any instability that might occur over the entire life-time of the dynamics. The singular vectors are viewed as random variables and their entropy leads to a simple metric that accurately predicts stability. The stable/unstable spaces are found by investigating the overall design space using an array of grid points of suitable spacing. The length of the time span needed to capture the nature of the dynamics can be as short as two or three periods. The robustness of the stability space is related to the tolerances assigned to the design variables. Errors due to sampling size, time increments, and number of significant singular vectors are controllable. The method can be implemented with readily available software. A study of two practical engineering systems with different distributions and tolerances, various initial conditions, and different time spans shows the efficacy of the proposed approach.

Author(s):  
Young Kap Son ◽  
Gordon J. Savage

A stable dynamic system implies safety, reliability, and satisfactory performance. However, the determination of stability is very difficult when the system is nonlinear and when the ever present uncertainties in the components must be considered. Herein a response-based approach that uses both system and time information obtained through singular value decomposition is presented to determine the stability space of nonlinear, uncertain dynamic systems: any approximating linearization of the nonlinearities has been obviated. The approach extends previous work for linear systems that invoked only the variability of the left singular vectors to predict stability. In the new approach, the variability of the right singular vectors is augmented to that of the left singular vectors and it is shown that a simulation time span, as short as two or three periods, is sufficient to predict stability over the entire life-time dynamics rendering the method very efficient. The stability space is a subset of the design space and its robustness is proportional to the tolerances assigned to the random design variables. Errors due to sampling size, time increments, and number of singular vectors used are controllable. The method can be implemented with readily available software. A study of a practical engineering system with different tolerances and different time spans shows the efficacy of the proposed approach.


Life ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 271
Author(s):  
Chentao Yong ◽  
Andras Gyorgy

While the vision of synthetic biology is to create complex genetic systems in a rational fashion, system-level behaviors are often perplexing due to the context-dependent dynamics of modules. One major source of context-dependence emerges due to the limited availability of shared resources, coupling the behavior of disconnected components. Motivated by the ubiquitous role of toggle switches in genetic circuits ranging from controlling cell fate differentiation to optimizing cellular performance, here we reveal how their fundamental dynamic properties are affected by competition for scarce resources. Combining a mechanistic model with nullcline-based stability analysis and potential landscape-based robustness analysis, we uncover not only the detrimental impacts of resource competition, but also how the unbalancedness of the switch further exacerbates them. While in general both of these factors undermine the performance of the switch (by pushing the dynamics toward monostability and increased sensitivity to noise), we also demonstrate that some of the unwanted effects can be alleviated by strategically optimized resource competition. Our results provide explicit guidelines for the context-aware rational design of toggle switches to mitigate our reliance on lengthy and expensive trial-and-error processes, and can be seamlessly integrated into the computer-aided synthesis of complex genetic systems.


2017 ◽  
Vol 744 ◽  
pp. 346-349
Author(s):  
Xiu Juan Li ◽  
Rui Song Guo ◽  
Min Zhao

The structure of the thin liquid films determines the stability of foams and emulsions. In this work the bubbles stretched length with different hollow SiO2 particles concentration is measured when the foam has been stilled for different time. The results show that the bubbles stretched length is longer than that of bubbles when the foam is free of hollow SiO2 particles even when the foam has been stilled for 500mins. The bubbles stretched length increases with increasing the concentration of hollow SiO2 particles. A strong hydration effect leaves a large volume of hydration layers on the solid particles surfaces in aqueous solutions. The water in hydration layers can help the film keep a certain thickness. The existence of hydration forces leads that two particles cannot be too close each other. The high concentration surfactant limited in the fixed area helps the film keep good elasticity. Therefore the film has a long life time with compatible thickness and elasticity and the three-phrase foam is upper stable.


1992 ◽  
Vol 02 (01) ◽  
pp. 1-9 ◽  
Author(s):  
YOHANNES KETEMA

This paper is concerned with analyzing Melnikov’s method in terms of the flow generated by a vector field in contrast to the approach based on the Poincare map and giving a physical interpretation of the method. It is shown that the direct implication of a transverse crossing between the stable and unstable manifolds to a saddle point of the Poincare map is the existence of two distinct preserved homoclinic orbits of the continuous time system. The stability of these orbits and their role in the phenomenon of sensitive dependence on initial conditions is discussed and a physical example is given.


2013 ◽  
Vol 859 ◽  
pp. 222-227
Author(s):  
Hong Jun Liu ◽  
Jin Hua Tan ◽  
Xue Wen Su ◽  
Hao Wu

Two typical monitoring sections are selected for obtaining the change law of the surface subsidence and the settlement after construction of soft soil foundations, and determining the reasonable unloading time. The research results show that the surface settlement rate is large during the filling stage, the rate decreases after the loading and gradually stabilized. The embankment midline settlement is larger than the settlement of the road shoulder which is concluded from the fact that the subsidence of the middle settlement plate is larger than those of the left and right plate. The surface subsidence rate is less than 5mm per month during the two month before unloading according to the data in the tables. The settlement after construction presumed from the middle plate is more significantly larger than that of left and right sides, hence, as the unloading basis of preloading drainage method in soft soil foundation treatment the settlement after construction which is calculated from the midline monitoring data of the road is appropriate. After 6 months the calculated post-construction settlements of the two sections are in the scope of the design requirement since they decrease with preloading time. The reliable basis is provided for the future design and construction of soft foundation in this area through the research results.


1999 ◽  
Author(s):  
O. Burak Ozdoganlar ◽  
William J. Endres

Abstract This paper presents a mathematical perspective, to complement the intuitive or practice-oriented perspective, to classifying machining operations as parallel-process (simultaneous) or single-process in nature. Illustrative scenarios are provided to demonstrate how these two perspectives may lead in different situations to the same or different conclusions regarding process parallelism. A model representation of a general parallel-process machining system is presented, based on which the general parallel-process stability eigenvalue problem is formulated. For a special simplified case of the general system, analytical methods are employed to derive a fully analytical stability solution. Thorough study of this solution through eigenvector analysis sheds light on some fundamental phenomena of parallel-process machining stability, such as dependence of the stability solution on phasing of the initial conditions (disturbances). This establishes the importance, when employing numerical time-domain simulation for such analyses, of specifying initial conditions for the multiple processes to be arbitrarily phased so that correct results are achieved across all spindle speeds.


2012 ◽  
Vol 32 (1) ◽  
pp. 9-14 ◽  
Author(s):  
Tatiane Regina Albarici ◽  
José Dalton Cruz Pessoa

This study assesses the storage temperature effect on the anthocyanins of pasteurized and unpasteurized açaí pulp. The data was obtained using a pasteurized and lyophilized pulp (PLP) to evaluate the temperature effect (0, 25, and 40 °C). Part of non-pasteurized frozen pulp (NPP) was pasteurized (NPP-P) at 90 °C for 30 seconds; both pulps were stored at 40 °C. The anthocyanin content reduction in the drink was evaluated from the half-life time (t1/2), activation energy (Ea), temperature quotient (Q10), and the reaction rate constant (k). The t1/2 of the PLP anthocyanins stored at 40 °C was 1.8 times less than that stored at 25 °C and 15 times less than that stored at 0 °C; therefore, the higher temperatures decreased the stability of anthocyanins. The pasteurization increased the t1/2 by 6.6 times (10.14 hours for NPP and 67.28 hours for NPP-P). The anthocyanin degradation on NPP-P followed a first order kinetic, while NPP followed a second order kinetic; thus it can be said that the pasteurization process can improve the preservation of anthocyanins in the pulp.


2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Andery Lim ◽  
Noramaliyana Haji Manaf ◽  
Kushan Tennakoon ◽  
R. L. N. Chandrakanthi ◽  
Linda Biaw Leng Lim ◽  
...  

Chlorophyll and xanthophyll dyes extracted from a single source of filamentous freshwater green algae (Cladophora sp.) were used to sensitize dye sensitized solar cells and their performances were investigated. A more positive interaction is expected as the derived dyes come from a single natural source because they work mutually in nature. Cell sensitized with mixed chlorophyll and xanthophyll showed synergistic activity with improved cell performance of 1.5- to 2-fold higher than that sensitized with any individual dye. The effect of temperature and the stability of these dyes were also investigated. Xanthophyll dye was found to be more stable compared to chlorophyll that is attributed in the ability of xanthophyll to dissipate extra energy via reversible structural changes. Mixing the dyes resulted to an increase in effective electron life time and reduced the process of electron recombination during solar cell operation, hence exhibiting a synergistic effect.


Sensor nodes are exceedingly energy compelled instrument, since it is battery operated instruments. In wsn network, every node is liable to the data transmission through the wireless mode [1]. Wireless sensor networks (WSN) is made of a huge no. of small nodes with confined functionality. The essential theme of the wireless sensor network is energy helpless and the WSN is collection of sensor. Every sensor terminal is liable to sensing, store and information clan and send it forwards into sink. The communication within the node is done via wireless network [3].Energy efficiency is the main concentration of a desining the better routing protocol. LEACH is a protocol. This is appropriate for short range network, since imagine that whole sensor node is capable of communication with inter alia and efficient to access sink node, which is not always correct for a big network. Hence, coverage is a problem which we attempt to resolve [6]. The main focus within wireless sensor networks is to increase the network life-time span as much as possible, so that resources can be utilizes efficiently and optimally. Various approaches which are based on the clustering are very much optimal in functionality. Life-time of the network is always connected with sensor node’s energy implemented at distant regions for stable and defect bearable observation [10].


2020 ◽  
Vol 198 ◽  
pp. 02006
Author(s):  
Nana Li ◽  
Yongqiang Zhou ◽  
Yanqiang Zhao ◽  
Guiju Li

In order to study the interaction between the left and right tunnels of suspension bridge tunnel-type anchorage, the finite difference numerical software is used to analyze the mechanical properties of the surrounding rock during the construction process. A numerical analysis model based on FLAC3D is established to analyze the stress, displacement and plastic zone changes of the surrounding rock of right tunnel anchor cavern during the construction of left tunnel anchor cavern. The right tunnel anchor cavern is excavated firstly, and then the left tunnel anchor cavern is excavated. The numerical simulation results show that the main displacement of the right tunnel occurs in the construction stage of the anchor plug body and the rear anchor cavern of the left tunnel. During the excavation of the left tunnel, the plastic zones of the left and right tunnel anchor caverns are only connected above the middle of the waist wall. Therefore, it is suggested that during the construction process, especially in the excavation stage of the anchor plug body and the rear anchor cavern, the area above the middle of the tunnel waist wall should be strengthened in time to ensure the construction safety.


Sign in / Sign up

Export Citation Format

Share Document