Enhancing Diesel Engine Performance and Reducing Emissions Using Binary Biodiesel Fuel Blend

2019 ◽  
Vol 142 (1) ◽  
Author(s):  
Paramvir Singh ◽  
S. R. Chauhan ◽  
Varun Goel ◽  
Ashwani K. Gupta
Keyword(s):  
Fuel Consumption ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Transport Sector ◽  
Biodiesel Fuel ◽  
Injection Timing ◽  
Fuel Blend ◽  
Fuel Blends ◽  
Fuel Mixing ◽  
Ci Engines

Fossil fuel consumption provides a negative impact on the human health and environment in parallel with the decreased availability of this valuable natural resource for the future generations to use as a source of chemical energy for all applications in energy, power, and propulsion. The diesel fuel consumption in the transport sector is higher than the gasoline in most developing countries for reasons of cost and economy. Biodiesel fuel offers a good replacement for diesel fuel in compression ignition (CI) diesel engines. Earlier investigations by the authors revealed that a blend of 70% amla seed oil biodiesel and 30% eucalyptus oil (AB70EU30) is the favorable alternative renewable fuel blend that can be used as a fuel in diesel engines. With any fuel, air/fuel mixing and mixture preparation impact efficiency, emissions, and performance in CI engines. Minor adjustments in engine parameters to improve air/fuel mixing and combustion are deployable approaches to achieve good performance with alternative fuel blends in CI engines. This paper provides the role of a minor modification to engine parameters (compression ratio, injection timing, and injection pressure) on improved performance using the above mixture of binary fuel blends (AB70EU30). The results showed that the use of AB70EU30 in modified engine resulted in higher brake thermal efficiency and lower brake specific fuel consumption compared to normal diesel for improved combustion that also resulted in very low tailpipe emissions.

scholarly journals Bibliometric Studies on Emissions from Diesel Engines Running on Alcohol/Diesel Fuel Blends: A Case Study about Noise Emissions

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 623
Author(s):  
María Dolores Redel-Macías ◽  
Sara Pinzi ◽  
Meisam Babaie ◽  
Ali Zare ◽  
Antonio Cubero-Atienza ◽  
...  
Keyword(s):  
Literature Review ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Internal Combustion Engines ◽  
Exhaust Emissions ◽  
Fuel Blend ◽  
Promising Alternative ◽  
Continuous Increase ◽  
Fuel Blends

The growing demand for fossil fuels, the rise in their price and many environmental concerns strengthen the incessant search for fuel alternatives. Recently, traffic noise has been described as a threat to human health and the environment, being responsible for premature deaths. In this context, the usage of alcohol/diesel fuel blends in diesel engines has gained increasing impact as a substitute fuel for use in internal combustion engines. Moreover, alcohol can be derived from environmentally friendly processes, i.e., fermentation. Furthermore, alcohols can enhance combustion characteristics due to a rise of the oxygen concentration, thus decreasing major emissions such as soot and reducing knock. The commonly used alcohols blended with diesel fuel are methanol and ethanol, recently followed by butanol. In contrast, there are very few studies about propanol blends; however, emissions reduction (including noise) could be remarkable. In the present work, an analytical literature review about noise and exhaust emissions from alcohol/diesel fuel blends was performed. The literature review analysis revealed a continuous increase in the number of publications about alcohol/diesel fuel blend exhaust emissions since 2000, confirming the growing interest in this field. However, only few publications about noise emission were found. Then, an experimental case study of noise emitted by an engine running on different alcohol (ethanol, butanol and propanol)/diesel fuel blends was presented. Experimental results showed that although diesel fuel provided the best results regarding noise emissions, butanol displayed the least deviation from that of diesel fuel among all tested alcohol blends. It may be concluded that tested alcohol/diesel fuel blends in general, and butanol blends in particular, could be a promising alternative to diesel fuel, considering noise behavior.

scholarly journals Effect of butanol on fuel consumption and smoke emission of direct injection diesel engine fueled by jatropha oil and diesel fuel blends with cold EGR system

2018 ◽  
Vol 49 ◽  
pp. 02010
Author(s):  
Syarifudin ◽  
Syaiful ◽  
Eflita Yohana
Keyword(s):  
Diesel Engine ◽  
Fuel Consumption ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Fossil Fuels ◽  
Direct Injection ◽  
Jatropha Oil ◽  
Fuel Blend ◽  
Direct Injection Diesel Engine

Diesel engines are widely used in industry, automotive, power generation due to better reliability and higher efficiency. However, diesel engines produce high smoke emissions. The main problem of diesel engine is actually the use of fossil fuels as a source of energy whose availability is diminishing. Therefore alternative fuels for diesel fuels such as jatropha and butanol are needed to reduce dependence on fossil fuels. In this study, the effect of butanol usage on fuel consumption and smoke emissions of direct injection diesel engine fueled by jatropha oil and diesel fuel with cold EGR system was investigated. The percentage of butanol was in the range of 5 to 15%, jatropha oil was in the range of 10 to 30% and the balance was diesel fuel. Cold EGR was varied through valve openings from 0 to 100% with 25% intervals. The experimental data shows that the BSFC value increases with increasing percentage of butanol. In addition, the use of EGR results in a higher increase of BSFC than that without EGR. While the addition of butanol into a blend of jatropha oil and diesel fuel causes a decrease in smoke emissions. The results also informed that the use of EGR in the same fuel blend led to increased smoke emissions.

scholarly journals Research on the Combustion, Energy and Emission Parameters of Various Concentration Blends of Hydrotreated Vegetable Oil Biofuel and Diesel Fuel in a Compression-Ignition Engine

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2978 ◽  
Author(s):  
Alfredas Rimkus ◽  
Justas Žaglinskis ◽  
Saulius Stravinskas ◽  
Paulius Rapalis ◽  
Jonas Matijošius ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Vegetable Oil ◽  
Diesel Fuel ◽  
Direct Injection ◽  
Engine Performance ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Fuel Blends ◽  
Wide Range ◽  
Torque Load

This article presents our research results on the physical-chemical and direct injection diesel engine performance parameters when fueled by pure diesel fuel and retail hydrotreated vegetable oil (HVO). This fuel is called NexBTL by NESTE, and this renewable fuel blends with a diesel fuel known as Pro Diesel. A wide range of pure diesel fuel and NexBTL100 blends have been tested and analyzed: pure diesel fuel, pure NexBTL, NexBTL10, NexBTL20, NexBTL30, NexBTL40, NexBTL50, NexBTL70 and NexBTL85. The energy, pollution and in-cylinder parameters were analyzed under medium engine speed (n = 2000 and n = 2500 rpm) and brake torque load regimes (30–120 Nm). AVL BOOST software was used to analyze the heat release characteristics. The analysis of brake specific fuel consumption showed controversial results due to the lower density of NexBTL. The mass fuel consumption decreased by up to 4%, and the volumetric consumption increased by up to approximately 6%. At the same time, the brake thermal efficiency mainly increased by approximately 0.5–1.4%. CO, CO2, NOx, HC and SM were analyzed, and the change in CO was negligible when increasing NexBTL in the fuel blend. Higher SM reduction was achieved while increasing the percentage of NexBTL in the blends.

scholarly journals Effect of Diesel Fuel-Coconut Oil-Butanol Blends on Operational Parameters of Diesel Engine

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3796
Author(s):  
Jakub Čedík ◽  
Martin Pexa ◽  
Michal Holúbek ◽  
Zdeněk Aleš ◽  
Radek Pražan ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Vegetable Oils ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Alternative Fuels ◽  
Coconut Oil ◽  
Solid Particles ◽  
Operational Parameters ◽  
Fuel Blends ◽  
Local Product

The global concentration of greenhouse gasses in the atmosphere is increasing as well as the emissions of harmful pollutants. Utilization of liquid biofuels in combustion engines helps to reduce these negative effects. For diesel engines, the most common alternative fuels are based on vegetable oils. Blending neat vegetable oils with diesel and/or alcohol fuels is a simple way to make them suitable for diesel engines. In this study, coconut oil was used in ternary fuel blends with diesel and butanol. Coconut oil is a potentially usable source of renewable energy, especially in the Pacific, where it is a local product. Diesel fuel-coconut oil-butanol fuel blends were used in concentrations of 70%/20%/10% and 60%/20%/20%, and 100% diesel fuel was used as a reference. The effect of the fuel blends on the production of harmful emissions, engine smoke, performance parameters, fuel consumption and solid particles production was monitored during the measurement. The engine was kept at a constant speed during the measurement and the load was selected at 50%, 75% and 100%. From the results, it can be stated that in comparison with diesel fuel, specific fuel consumption increased with a positive effect on the reduction of engine smoke.

Binary Biodiesel Blend Endurance Characteristics in a Compression Ignition Engine

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Paramvir Singh ◽  
S. R. Chauhan ◽  
Varun Goel ◽  
Ashwani K. Gupta
Keyword(s):  
Diesel Fuel ◽  
Biodiesel Fuel ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Engine Operation ◽  
Endurance Tests ◽  
Ci Engines

The results obtained on wear assessment from a compression ignition (CI) engine fueled with a blend of 70% amla seed biodiesel (AB) and 30% eucalyptus oil (EU) on volume basis (called AB70EU30). The results showed stable engine operation and good operability of the engine-fuel system with the binary biodiesel fuel blend. The feasibility of this blend over a long-term endurance tests was explored. The specific assessment examination included the fate of cylinder head, pump plunger, injector nozzle, and piston crown, which affects the engine performance and engine life. The experimental results revealed better tribological performance characteristics with the binary fuel blend as compared to contemporary diesel fuel. No specific problem was encountered during the long-term endurance tests with the binary fuel blend using the modified engine parameters. The results show that the binary fuel mixture offers good potential for use as diesel fuel in CI engines while maintaining good performance and endurance.

Engine Performance with Diesel-Biodiesel Blends Fuel and Emission Characteristics

2020 ◽  
Vol 38 (5A) ◽  
pp. 779-788
Author(s):  
Marwa N. Kareem ◽  
Adel M. Salih
Keyword(s):  
Sulfur Content ◽  
Diesel Fuel ◽  
Engine Performance ◽  
Esterification Reaction ◽  
Biodiesel Fuel ◽  
Exhaust Gas ◽  
Gas Temperature ◽  
Biodiesel Blends ◽  
Fuel Blends ◽  
Hc Emissions

In this study, the sunflowers oil was utilized as for producing biodiesel via a chemical operation, which is called trans-esterification reaction. Iraqi diesel fuel suffers from high sulfur content, which makes it one of the worst fuels in the world. This study is an attempt to improve the fuel specifications by reducing the sulfur content of the addition of biodiesel fuel to diesel where this fuel is free of sulfur and has a thermal energy that approaches to diesel.20%, 30% and 50% of Biodiesel fuel were added to the conventional diesel. Performance tests and pollutants of a four-stroke single-cylinder diesel engine were performed. The results indicated that the brake thermal efficiency a decreased by (4%, 16%, and 22%) for the B20, B30 and B50, respectively. The increase in specific fuel consumption was (60%, 33%, and 11%) for the B50, B30, and B20 fuels, respectively for the used fuel blends compared to neat diesel fuel. The engine exhaust gas emissions measures manifested a decreased of CO and HC were CO decreased by (13%), (39%) and (52%), and the HC emissions were lower by (6.3%), (32%), and (46%) for B20, B30 and B50 respectively, compared to diesel fuel. The reduction of exhaust gas temperature was (7%), (14%), and (32%) for B20, B30 and B50 respectively. The NOx emission increased with the increase in biodiesel blends ratio. For B50, the raise was (29.5%) in comparison with diesel fuel while for B30 and B20, the raise in the emissions of NOx was (18%) and...

scholarly journals Progress in the Use of Biobutanol Blends in Diesel Engines

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3215
Author(s):  
David Fernández-Rodríguez ◽  
Magín Lapuerta ◽  
Lizzie German
Keyword(s):  
Ambient Temperature ◽  
Diesel Fuel ◽  
Diesel Engines ◽  
Electronic Control Unit ◽  
Control Unit ◽  
Transport Sector ◽  
Particulate Matter Emissions ◽  
Production Techniques ◽  
Road Freight Transportation ◽  
Advanced Production

Nowadays, the transport sector is trying to face climate change and to contribute to a sustainable world by introducing modern after-treatment systems or by using biofuels. In sectors such as road freight transportation, agricultural or cogeneration in which the electrification is not considered feasible with the current infrastructure, renewable options for diesel engines such as alcohols produced from waste or lignocellulosic materials with advanced production techniques show a significant potential to reduce the life-cycle greenhouse emissions with respect to diesel fuel. This study concludes that lignocellulosic biobutanol can achieve 60% lower greenhouse gas emissions than diesel fuel. Butanol-diesel blends, with up to 40% butanol content, could be successfully used in a diesel engine calibrated for 100% diesel fuel without any additional engine modification nor electronic control unit recalibration at a warm ambient temperature. When n-butanol is introduced, particulate matter emissions are sharply reduced for butanol contents up to 16% (by volume), whereas NOX emissions are not negatively affected. Butanol-diesel blends could be introduced without startability problems up to 13% (by volume) butanol content at a cold ambient temperature. Therefore, biobutanol can be considered as an interesting option to be blended with diesel fuel, contributing to the decarbonization of these sectors.

scholarly journals Influence of blends of diesel and renewable fuels on CI engine emissions over transient engine conditions.

2018 ◽  
Author(s):  
Adriaan Smuts Van Niekerk ◽  
Benjamin Drew ◽  
Neil Larsen ◽  
Peter Kay
Keyword(s):  
Fuel Consumption ◽  
Co2 Emissions ◽  
Nox Emissions ◽  
Compression Ignition ◽  
Engine Emissions ◽  
Drive Cycle ◽  
Fuel Blend ◽  
High Oxygen Content ◽  
Fuel Blends ◽  
Ci Engine

To reduce the amount of carbon dioxide released from transportation the EU has implemented legislation to mandate the renewable content of petrol and diesel fuels. However, due to the complexity of the combustion process the addition of renewable content, such as biodiesel and ethanol, can have a detrimental effect on other engine emissions. In particular the engine load can have a significant impact on the emissions. Most research that have studied this issue are based on steady state tests, that are unrealistic of real world driving and will not capture the difference between full and part loads. This study aims to address this by investigating the effect of renewable fuel blends of diesel, biodiesel and ethanol on the emissions of a compression ignition engine tested over the World Harmonised Light Vehicle Test Procedure (WLTP). Diesel, biodiesel and ethanol were blended to form binary and ternary blends, the ratios were determined by Design of Experiments (DoE). The total amount of emissions for CO, CO2 and NOx as well as the fuel consumption, were measured from a 2.4 liter compression ignition (CI) engine running over the WLTP drive cycle. The results depicted that percentages smaller than 10 % of ethanol in the fuel blend can reduce CO emissions, CO2 emissions as well as NOx emissions, but increases fuel consumption with increasing percentage of ethanol in the fuel blend. Blends with biodiesel resulted in minor increases in CO emissions due to the engine being operated in the low and medium load regions over the WLTP. CO2 emissions as well as NOx emissions increased as a result of the high oxygen content in biodiesel which promoted better combustion. Fuel consumption increased for blends with biodiesel as a result from biodiesel's lower heating value. All the statistical models describing the engine responses were significant and this demonstrated that a mixture DoE is suitable to quantify the effect of fuel blends on an engine's emissions response. An optimised ternary blend of B2E9 was found to be suitable as a 'drop in' fuel that will reduce harmful emissions of CO emissions by approximately 34 %, NOx emissions by 10 % and CO2 emissions by 21 % for transient engine operating scenarios such as the WLTP drive cycle.

scholarly journals Experimental investigation on performance, smoke and exhaust gas analysis of four stroke diesel engine using pongomia/neem oil biodiesel

2021 ◽  
Vol 12 (4) ◽  
pp. 23-40
Author(s):  
Naresh Kumar Konada ◽  
K.N.S. Suma ◽  
B.B. Ashok Kumar
Keyword(s):  
Diesel Engine ◽  
Energy Demand ◽  
Alternative Fuels ◽  
Gas Analysis ◽  
Load Test ◽  
Transport Sector ◽  
Exhaust Gas ◽  
Neem Oil ◽  
Fuel Blends ◽  
Ci Engines

Increase in energy demand, stringent emission norms and depletion of oil resources led to the discovery of alternative fuels forinternal combustion engines. Many alternative fuels like alcohols, petroleum gas, and compressed natural gas have been alreadycommercialized in the transport sector. In the present work, Pongomia oil and Neem oil are blended with diesel and used as analternate fuel for CI engines. The Pongomia oil and Neem oil can be converted into bio diesel using a chemical process of trans- esterification.Different proportions of fuel blends have been produced by the process of blending bio diesel consisting of 10%, 15%, 20%, 25%, and 30% (B10, B15, B20, B25, B30). The fuel properties of each blend are determined. The load test along with smoke and exhaust gas analysis of 4- Stroke Diesel engine using the blends of Pongomia oil and Neem oil with diesel are done in this study. The performance parameters of an engine are calculated for different blends. The sustainability of using alternate fuels in Diesel engines, especially the potential use of Pongomia oil and Neem oil as biodiesel have been brought to the fore through this work and suitable blends of bio diesel is suggested from the results. Keywords: 4-Stroke Diesel Engine, Pongomia and Neem oil Bo diesel, Performance, Smoke and exhaust gas analysis.

Spray and Combustion Characteristics of Biodiesel∕Diesel Blended Fuel in a Direct Injection Common-Rail Diesel Engine

2008 ◽  
Vol 130 (3) ◽  
Author(s):  
Hyun Kyu Suh ◽  
Hyun Gu Roh ◽  
Chang Sik Lee
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Direct Injection ◽  
Injection Rate ◽  
Combustion Characteristics ◽  
Biodiesel Fuel ◽  
Injection Timing ◽  
Pilot Injection ◽  
Blended Fuel ◽  
Conventional Diesel Fuel

The aim of this work is to investigate the effect of the blending ratio and pilot injection on the spray and combustion characteristics of biodiesel fuel and compare these factors with those of diesel fuel in a direct injection common-rail diesel engine. In order to study the factors influencing the spray and combustion characteristics of biodiesel fuel, experiments involving exhaust emissions and engine performance were conducted at various biodiesel blending ratios and injection conditions for engine operating conditions. The macroscopic and microscopic spray characteristics of biodiesel fuel, such as injection rate, split injection effect, spray tip penetration, droplet diameter, and axial velocity distribution, were compared with the results from conventional diesel fuel. For biodiesel blended fuel, it was revealed that a higher injection pressure is needed to achieve the same injection rate at a higher blending ratio. The spray tip penetration of biodiesel fuel was similar to that of diesel. The atomization characteristics of biodiesel show that it has higher Sauter mean diameter and lower spray velocity than conventional diesel fuel due to high viscosity and surface tension. The peak combustion pressures of diesel and blending fuel increased with advanced injection timing and the combustion pressure of biodiesel fuel is higher than that of diesel fuel. As the pilot injection timing is retarded to 15deg of BTDC that is closed by the top dead center, the dissimilarities of diesel and blending fuels combustion pressure are reduced. It was found that the pilot injection enhanced the deteriorated spray and combustion characteristics of biodiesel fuel caused by different physical properties of the fuel.

Sign in / Sign up

Export Citation Format

Share Document