Determination of Power and Torque Curves of Electric Driven Vehicles Based on Diagnostic Methods

2015 ◽  
Author(s):  
István Lakatos ◽  
Dániel Pup ◽  
Dávid Czeglédi
Keyword(s):  
Test Bench ◽  
Diagnostic Methods ◽  
Power Measurement ◽  
Measuring System ◽  
Motor Power ◽  
Power Characteristics ◽  
Torque Curve ◽  
Curve Determination ◽  
First Time

The transmitted power of motors can be defined by test bench examinations, in which the motor needs to be dismounted. By applying diagnostic methods only minimal disassembly, or indeed none at all, is necessary. In this paper diagnostic methods are systematized by different studies. Moreover, a new diagnostic procedure (established by the authors) is also introduced, which can be carried out by a relatively cheap measuring system design. Power measurement on a roller test bench is a well-tried technique for vehicle examination. Basically, the wheel parameters (tractive force, torque, power) are measured, but there are also procedures for motor power measurement. By applying the new procedure, the diagnostic method, (simple construction and test bench construction at a favourable price) torque and power characteristics of the mounted motor can be defined. The theoretical considerations of the new measuring technique and the implementation of the measuring system are introduced in this paper. Test bench for drive motor power and torque curve determination. In this study the diagnostical measuring systems and, for the first time, the measuring principle and technology of the new theory-based roller power test bench are presented. For its construction measurements have been carried out which make an important contribution to the research. The results of the research contribute to the development of diagnostics methods and to making them more wide-spread.

scholarly journals Methodological issues of metrological analysis of planned medieval towns and villages

ACTA IMEKO ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 217
Author(s):  
Anna Maria Kubicka ◽  
Maria Legut-Pintal
Keyword(s):  
Historical Research ◽  
Measuring System ◽  
Methodological Issues ◽  
Metrological Analysis ◽  
Units Of Measurement ◽  
Modular Analysis ◽  
First Time

<p class="Abstract">In this paper, we illustrate problems related to the application of two methods used for the reconstruction of the parcellation of medieval towns: modular analysis and the cosine quantogram. We propose the usage of the cosine quantogram, which is rarely used to study urban layout, for the identification of units of measurement in regular medieval towns. Based on two examples from the region of Silesia, Poland, Namyslów and Dzierzoniów, we discuss the usefulness of both methods in the reconstruction of the original measuring system and town layout. For the first time, we have applied these two methods to the study of the layout of a regular village. Despite the limitations, such as the level of precision in the construction of a medieval town’s layout at the time of its foundation, later changes to the division of plots and the known inaccuracy of modern maps, it seems that combining both methods allows the determination of the module used for the planning of the original urban layout. The application of the cosine quantogram can be useful for improving the results of modular analysis. Nevertheless, the results of both methods should be verified against archaeological results and historical research.</p>

EVALUATION OF HYSTEROSALPINGOGRAPHY VERSUS LAPAROSCOPY IN THE DETERMINATION OF TUBAL FACTORS IN FEMALE INFERTILITY: A HOSPITAL BASED COMPARATIVE STUDY.

2020 ◽  
Vol 4 (9) ◽  
Author(s):  
Richa Choudhary ◽  
Rishikant Sinha
Keyword(s):  
Female Infertility ◽  
Diagnostic Methods ◽  
Panoramic View ◽  
Tubal Patency ◽  
Pelvic Organs ◽  
Clinical Investigations ◽  
Detailed Assessment ◽  
Reproductive Anatomy ◽  
Tubal Pathology

Objectives: Hysterosalpingography and laparoscopy both are the diagnostic methods for assessment of female infertility.  The present study was to compare the evaluation of hysterosalpingography (HSG) versus laparoscopy in determination of tubal factors in female infertility. Methods: Detailed assessment, physical examination and clinical investigations were performed in all 100 infertile female with age 20 years to 40 years. All patients were advised to perform digital HSG. Patients with an abnormal HSG underwent laparoscopy without delay, whereas in patients with a normal HSG, laparoscopy was performed three months after HSG. HSG is best scheduled during the 2nd -5th day interval immediately following the end of menstruation, to minimize risk for infection, avoid interference from intrauterine blood and clot, and to prevent any possibility that the procedure might be performed after conception. Results: Data was analysed by using IBM SPSS version 23 software.  All data was tabulated and percentages were calculated. Mean ± standard deviation was observed. Conclusions: Diagnostic laparoscopy is the gold standard in diagnosing tubal pathology and other intra-abdominal causes of infertility. Other hand, Hysterosalpingography is a frequently utilized diagnostic tool in the assessment of tubal status and detection of uterine anatomical defects in infertility. Hysterosalpingography and laparoscopy are not alternatives but complimentary investigations. But, inadequacy of hysterosalpingography (HSG) in determining the state of tubal patency, emphasizes the need for laparoscopy. Laparoscopy provides both a panoramic view of the pelvic reproductive anatomy and a magnified view of pelvic organs and peritoneal surfaces. Keywords: Female infertility, Tubal patency, HSG, Laparoscopy

pH Dependent Release Potential of Natural Polymers in Sustained Release of Ornidazole From Colon Targeted Delivery System)

2019 ◽  
Vol 9 (02) ◽  
Author(s):  
Sharma Pankaj ◽  
Tailang Mukul
Keyword(s):  
Drug Release ◽  
Delivery System ◽  
Targeted Delivery ◽  
Guar Gum ◽  
Acidic Environment ◽  
Natural Polymers ◽  
Weight Variation ◽  
Curve Determination ◽  
Preformulation Studies

The aim of present work was to prepare colon specific delivery system of Ornidazole using different ratio of shellac, zein and guar gum. From study of various literature it revealed that shellac, zein and guar gum released drug from dosage form at the pH of 6.9, 11.5, 7-9 respectively. The main problem associated with colon targeted drug delivery system is degradation of drug in the acidic environment of stomach to circumvent the present problem different combinations of shellac, zein and guar gum were employed in the formulation of colon targeted tablet. Several preformulation parameters were determined such as melting point, FTIR spectroscopy, preparation of calibration curve, determination of λmax and partition coefficient. After the preformulation studies, next steps were preparation of core tablets, evaluation of core of tablets and coating of tablets. The data obtained from preformulation study seven formulations were developed and evaluated for various parameters. Based on evaluated parameter such as weight variation, friability, dissolution study, invitro drug release etc. the F7 formulation show better results colon targeted tablets. Drug content in F7 formulation was 95% and drug release after 6 hrs was 96%. Formulation containing combination of shellac, zein and guar gum released least amount of drug in the acidic environment of stomach and released most of the drug in colon. It is evide

Disability as a social phenomenon

2020 ◽  
pp. 22-38
Author(s):  
Natalia Guseva ◽  
Vitaliy Berdutin
Keyword(s):  
Social Protection ◽  
Russian Society ◽  
Stage Model ◽  
High Quality ◽  
Rehabilitation Programs ◽  
Current State ◽  
The Social ◽  
Consistent Solution ◽  
First Time

At present, the problem of establishing disability is a point at issue in Russia. Despite the fact that medical criteria for disability are being developed very actively, high-quality methods for assessing social hallmarks are still lacking. Since disability is a phenomenon inherent in any society, each state forms a social and economic policy for people with disabilities in accordance with its level of development, priorities and opportunities. We have proposed a three-stage model, which includes a system for the consistent solution of the main tasks aimed at studying the causes and consequences of the problems encountered today in the social protection of citizens with health problems. The article shows why the existing approaches to the determination of disability and rehabilitation programs do not correspond to the current state of Russian society and why a decrease in the rate of persons recognized as disabled for the first time does not indicate an improvement in the health of the population. The authors proposed a number of measures with a view to correcting the situation according to the results of the study.

Phytochemical Constituents of Annona reticulata and their Cytotoxic Activity

2020 ◽  
Vol 17 (3) ◽  
pp. 206-210
Author(s):  
Ty Viet Pham ◽  
Thang Quoc Le ◽  
Anh Tuan Le ◽  
Hung Quoc Vo ◽  
Duc Viet Ho
Keyword(s):  
Cytotoxic Activity ◽  
Cell Lines ◽  
Structural Determination ◽  
Phytochemical Investigation ◽  
Ic50 Values ◽  
Phytochemical Constituents ◽  
First Time ◽  
Annona Reticulata

A phytochemical investigation of the leaves of Annona reticulata led to the isolation and structural determination of β-sitosterol (1), ent-pimara-8(14),15-dien-19-oic acid (2), ent-pimara- 8(14),15-dien-19-ol (3), quercetin (4), quercetin 3-O-α-L-arabinopyranoside (5), and a mixture of quercetin 3-O-β-D-galactopyranoside (6a) and quercetin 3-O-β-D-glucopyranoside (6b). Of these, compounds 2 and 3 were isolated from the genus Annona for the first time. Compound 3 showed strong cytotoxicity against SK-LU-1 and SW626 cell lines with IC50 values of 17.64 ± 1.07 and 19.79 ± 1.41 μg mL-1, respectively.

Development of an HPLC-UV Method for Quantification of Stattic

2019 ◽  
Vol 15 (6) ◽  
pp. 568-573
Author(s):  
Soheil Sedaghat ◽  
Ommoleila Molavi ◽  
Akram Faridi ◽  
Ali Shayanfar ◽  
Mohammad Reza Rashidi
Keyword(s):  
High Performance ◽  
Accurate Method ◽  
Plasma Samples ◽  
Promising Target ◽  
Relative Standard ◽  
Dimerization Inhibitor ◽  
Oncogenic Protein ◽  
First Time ◽  
Transcription 3

Background: Signal transducer and activator of transcription 3 (STAT3), an oncogenic protein found constitutively active in many types of human malignancies, is considered to be a promising target for cancer therapy. Objective: In this study for the first time, a simple and accurate method has been developed for the determination of a STAT3 dimerization inhibitor called stattic in aqueous and plasma samples. Methods: A reverse-phase high-performance liquid chromatography (RP-HPLC) composed of C18 column as stationary phase, and the mixture of acetonitrile (60%) and water (40%) as mobile phase with a UV detection at 215 nm were applied for quantification of stattic. The developed method was validated by Food and Drug Administration (FDA) guideline. Results: The method provided a linear range between 1-40 and 2.5-40 µg mL-1 for aqueous and plasma samples, respectively, with a correlation coefficient of 0.999. The accuracy (as recovery) of the developed method was found to be between 95-105% for aqueous medium and 85-115% for plasma samples. The precision (as relative standard deviation) for aqueous and plasma samples was less than 6% and 15%, respectively. The sensitivity of the developed method based on FDA guideline was 1 µg mL-1 for aqueous and 2.5 µg mL-1 for plasma samples. Conclusion: These results show that the established method is a fast and accurate quantification for stattic in aqueous and plasma samples.

Carbon dots derived from Fusobacterium nucleatum for intracellular determination of Fe3+ and bioimaging both in vitro and in vivo

2021 ◽  
Author(s):  
Lijuan Liu ◽  
Shengting Zhang ◽  
Xiaodan Zheng ◽  
Hongmei Li ◽  
Qi Chen ◽  
...  
Keyword(s):  
Carbon Dots ◽  
Fusobacterium Nucleatum ◽  
Living Cells ◽  
First Time ◽  
Fluorescent Carbon Dots ◽  
Fluorescent Carbon

Fusobacterium nucleatum has been employed for the first time to synthesize fluorescent carbon dots which could be applied for the determination of Fe3+ ions in living cells and bioimaging in vitro and in vivo with excellent biocompatibility.

scholarly journals Experimental investigation to characterize simple versus multi scaling analysis of hydraulic conductivity at a mesoscale

2021 ◽  
Author(s):  
Guglielmo Federico Antonio Brunetti ◽  
Samuele De Bartolo ◽  
Carmine Fallico ◽  
Ferdinando Frega ◽  
Maria Fernanda Rivera Velásquez ◽  
...  
Keyword(s):  
Hydraulic Conductivity ◽  
Spatial Variability ◽  
Hydraulic Properties ◽  
Scaling Laws ◽  
Scaling Analysis ◽  
Field Scale ◽  
Porous Formation ◽  
Proper Design ◽  
First Time

AbstractThe spatial variability of the aquifers' hydraulic properties can be satisfactorily described by means of scaling laws. The latter enable one to relate the small (typically laboratory) scale to the larger (typically formation/regional) ones, therefore leading de facto to an upscaling procedure. In the present study, we are concerned with the spatial variability of the hydraulic conductivity K into a strongly heterogeneous porous formation. A strategy, allowing one to identify correctly the single/multiple scaling of K, is applied for the first time to a large caisson, where the medium was packed. In particular, we show how to identify the various scaling ranges with special emphasis on the determination of the related cut-off limits. Finally, we illustrate how the heterogeneity enhances with the increasing scale of observation, by identifying the proper law accounting for the transition from the laboratory to the field scale. Results of the present study are of paramount utility for the proper design of pumping tests in formations where the degree of spatial variability of the hydraulic conductivity does not allow regarding them as “weakly heterogeneous”, as well as for the study of dispersion mechanisms.

Sign in / Sign up

Export Citation Format

Share Document