Laboratory and Field Investigations of the Performance of HPCC Coatings

2004 ◽  
Author(s):  
Fraser King ◽  
Jenny Been ◽  
Robert Worthingham ◽  
Grant Rubie
Keyword(s):  
Laboratory Testing ◽  
High Performance ◽  
Impact Damage ◽  
Mechanical Damage ◽  
Degradation Process ◽  
Field Trials ◽  
Hot Water ◽  
Corrosion Properties ◽  
Field Exposure

Three-layer FBE-polyolefin coatings offer the promise of good adhesive and corrosion properties from the FBE layer coupled with resistance to mechanical damage from the outer polyolefin layer. TransCanada Pipelines have been investigating the long-term behaviour of High Performance Composite Coating (HPCC) using a combination of laboratory testing and field trials. In the laboratory, panels of HPCC were subjected to standard CD disbondment testing following a two-stage degradation process. The degradation process, designed to simulate field exposure, involved impact damage followed by exposure to either a hot-water soak (60°C), or to microbiologically active soil with and without the application of CP. Following exposure, the duplicate panels were subject to 28-day CD disbondment tests to determine the extent of damage caused by the combination of impact and soil/hot water exposure. In the field, a section of HPCC coating was excavated and examined after 11 years service. In addition to visual inspection, the coating was examined in situ using a newly developed impedance technique EISPlus. This technique is a development of earlier EIS techniques and allows the dielectric properties of the coating to be determined in addition to the impedance of the solution-filled pores. EISPlus provides an improved sensitivity for high-impedance coatings, such as FBE, HPCC, and polyolefin tape. Furthermore, since it is a dry technique, rapid measurements can be made on coatings exposed to field conditions allowing the in-service performance to be determined. Results of both the laboratory testing and field EISPlus measurements are presented and the long-term performance of the coating discussed.

Defining a New Era for Induction Motors

2021 ◽  
Author(s):  
Katherine Escobar ◽  
Maxim Radov ◽  
Cristina Vasilache
Keyword(s):  
Power Consumption ◽  
Induction Motor ◽  
Laboratory Testing ◽  
High Performance ◽  
Induction Motors ◽  
Simulated Data ◽  
Field Trials ◽  
Electrical Performance ◽  
Electrical Machine ◽  
New Era

Abstract Induction motors have been widely used in the ESP industry for decades. Motor operation, control, and optimization are well-understood topics among providers and final consumers, who strive to get the most efficient electrical machine in the well to reduce power consumption and, consequently, operating expenses. This paper presents a case study for a newly redesigned induction motor and changes made in its design and construction. A field trial of two wells deployed with the new motor and a comparison with a well deployed with the standard motor are described. Field and simulated data are used to analyze the electrical performance and power consumption. The test results included are from wells in the US Rocky Mountains. Additionally, some of the motors in this test were manufactured with a high-performance thermally conductive and electrically insulative windings encapsulation, which is further discussed in the paper. The increased efficiency was achieved through an optimized electromagnetic design that helped to reduce the motor total losses. Efficiency gains were measured against standard motor design through laboratory testing, and the result showed 2.2 to 2.5% higher efficiency for the newly developed motor. With the higher power density, the motor length was shortened from 20 to 25% during the field trials, reducing the total length of the string. In addition to the optimization of motor length, the newly redesigned motor generates a lower core temperature when compared to a previous motor of the same length and subjected to the same load. This fact allows the motor to be loaded up to 25% above its nameplate rating, improving the horsepower rating and opening a new era for highly flexible induction motors. The gathered results showed that the newly redesigned motor provides higher efficiency and lower total electrical power consumption compared to the standard induction motor that would have been used in those applications. Both results were evidenced in controlled laboratory testing and field trials. A further comparison of similar ESP equipment configuration running with former motor versions is also provided, as well as design comparison cases between the expected results of the previous and the newly designed motor.

scholarly journals Chemical Profile, Antioxidative, and Gut Microbiota Modulatory Properties of Ganpu Tea: A Derivative of Pu-erh Tea

Nutrients ◽  
2020 ◽  
Vol 12 (1) ◽  
pp. 224 ◽  
Author(s):  
Yuying Zheng ◽  
Xuan Zeng ◽  
Tingting Chen ◽  
Wei Peng ◽  
Weiwei Su
Keyword(s):  
Gut Microbiota ◽  
High Performance ◽  
Biological Activities ◽  
Hot Water ◽  
Chemical Profile ◽  
Potential Health ◽  
Essential Information ◽  
Dietary Consumption ◽  
Citrus Reticulate

Ganpu tea is an emerging tea drink produced from Pu-erh tea and the pericarp of Citrus reticulate Chachi (GCP). Recently, it has been increasingly favored by consumers due to the potential health effects and special taste. However, information concerning its chemical profile and biological activities is scarce. In this work, a total of 92 constituents were identified in hot-water extracts of Ganpu tea with ultra-high performance liquid chromatography/quadrupole-time-of-flight tandem mass spectrometry (UHPLC-Q-TOF-MS/MS). Moreover, the antioxidative and gut microbiota modulatory properties of Ganpu tea were investigated in rats after long-term dietary consumption. Ganpu tea and GCP could significantly enhance the activities of superoxide dismutase (SOD) by 13.4% (p < 0.05) and 15.1% (p < 0.01), as well as the activities of glutathione peroxidase (GSH-Px) by 16.3% (p < 0.01) and 20.5% (p < 0.01), respectively. Both showed better antioxidant capacities than Pu-erh tea. Ganpu tea increased the abundance of Bifidobacterium, Lactobacillus, and Lactococcus, suggesting the potential of Ganpu tea in modulating the gut microbiota to benefit human health. The obtained results provide essential information for further investigation of Ganpu tea.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Efficient Co-Harvesting of Solar Energy and Low-Grade Heat by Molecular Photoswitches for High Energy Density, Long-Term Stable Solar Thermal Battery

2019 ◽  
Author(s):  
Zhao-Yang Zhang ◽  
Tao LI
Keyword(s):  
Energy Density ◽  
Solar Energy ◽  
High Performance ◽  
High Energy ◽  
Solar Thermal ◽  
High Energy Density ◽  
Low Grade ◽  
Thermal Battery ◽  
Low Grade Heat

Solar energy and ambient heat are two inexhaustible energy sources for addressing the global challenge of energy and sustainability. Solar thermal battery based on molecular switches that can store solar energy and release it as heat has recently attracted great interest, but its development is severely limited by both low energy density and short storage stability. On the other hand, the efficient recovery and upgrading of low-grade heat, especially that of the ambient heat, has been a great challenge. Here we report that solar energy and ambient heat can be simultaneously harvested and stored, which is enabled by room-temperature photochemical crystal-to-liquid transitions of small-molecule photoswitches. The two forms of energy are released together to produce high-temperature heat during the reverse photochemical phase change. This strategy, combined with molecular design, provides high energy density of 320-370 J/g and long-term storage stability (half-life of about 3 months). On this basis, we fabricate high-performance, flexible film devices of solar thermal battery, which can be readily recharged at room temperature with good cycling ability, show fast rate of heat release, and produce high-temperature heat that is >20<sup> o</sup>C higher than the ambient temperature. Our work opens up a new avenue to harvest ambient heat, and demonstrate a feasible strategy to develop high-performance solar thermal battery.

Use Of Tai Chi Elements To Increase Respiratory Amplitude

2019 ◽  
pp. 11-20
Author(s):  
Mihai-Alexandru Citea ◽  
Marius Neculaes
Keyword(s):  
High Performance ◽  
Tai Chi ◽  
Sports Club ◽  
Optimal Functioning ◽  
Physiological Adaptations ◽  
Competitive Activity ◽  
Abdominal Breathing ◽  
Study Participants ◽  
Different Levels

High performance sport has a major impact on the physiological adaptations of the respiratory system. The importance of the optimal functioning of this system is essential to achieve top results in high performance sport but also in maintaining a long term health status. Science journals present numerous studies that highlight the benefits of practicing Tai Chi on the general population, with effects ranging from improving cardiac function, to influencing the immune system. The purpose of this study is to identify whether by practicing Tai Chi forms a athlete can change their breathing pattern and develop their respiratory amplitude. The subjects of the study were 22 fencing practitioners, accredited at the Iași Municipal Sports Club (C.S.M. Iași), aged between 14 and 18 years, with over 3 years of competitive activity. Materials and method: The study participants were evaluated initially and at the end of 7 months of practice. The frequency was 3 sessions per week, and the duration of each session was 20-30 minutes. The evaluation consisted in measuring the circumference of the thorax at 3 different levels: subaxillary, medial thorax (T6-T7) and lower rib (diaphragmatic) in maximal inspiration and expiration. Conclusions: A constant evolution is observed in most of the exposed cases. In cases where this evolution is not visible, a change in the breathing mode can be noticed, transforming from an upper rib breathing into a thoracic or abdominal breathing. With the exception of one case, all subjects had an improvement of the value in the lower rib level.

scholarly journals RELaTED Project: New Developments on Ultra-Low Temperature District Heating Networks

Proceedings ◽  
2020 ◽  
Vol 65 (1) ◽  
pp. 25
Author(s):  
Antonio Garrido Marijuan ◽  
Roberto Garay ◽  
Mikel Lumbreras ◽  
Víctor Sánchez ◽  
Olga Macias ◽  
...  
Keyword(s):  
Low Temperature ◽  
High Performance ◽  
Waste Heat ◽  
District Heating ◽  
Hot Water ◽  
Thermal Systems ◽  
Heating Source ◽  
Wide Range ◽  
Thermal Sources ◽  
Heating Networks

District heating networks deliver around 13% of the heating energy in the EU, being considered as a key element of the progressive decarbonization of Europe. The H2020 REnewable Low TEmperature District project (RELaTED) seeks to contribute to the energy decarbonization of these infrastructures through the development and demonstration of the following concepts: reduction in network temperature down to 50 °C, integration of renewable energies and waste heat sources with a novel substation concept, and improvement on building-integrated solar thermal systems. The coupling of renewable thermal sources with ultra-low temperature district heating (DH) allows for a bidirectional energy flow, using the DH as both thermal storage in periods of production surplus and a back-up heating source during consumption peaks. The ultra-low temperature enables the integration of a wide range of energy sources such as waste heat from industry. Furthermore, RELaTED also develops concepts concerning district heating-connected reversible heat pump systems that allow to reach adequate thermal levels for domestic hot water as well as the use of the network for district cooling with high performance. These developments will be demonstrated in four locations: Estonia, Serbia, Denmark, and Spain.

scholarly journals Review on Development and Dental Applications of Polyetheretherketone-Based Biomaterials and Restorations

Materials ◽  
2021 ◽  
Vol 14 (2) ◽  
pp. 408 ◽  
Author(s):  
Ludan Qin ◽  
Shuo Yao ◽  
Jiaxin Zhao ◽  
Chuanjian Zhou ◽  
Thomas W. Oates ◽  
...  
Keyword(s):  
High Performance ◽  
Dental Resin ◽  
Oral Environment ◽  
Inert Surface ◽  
Oral Implant ◽  
Long Term Performance ◽  
Dental Applications ◽  
Term Performance ◽  
Orthopedic Applications

Polyetheretherketone (PEEK) is an important high-performance thermoplastic. Its excellent strength, stiffness, toughness, fatigue resistance, biocompatibility, chemical stability and radiolucency have made PEEK attractive in dental and orthopedic applications. However, PEEK has an inherently hydrophobic and chemically inert surface, which has restricted its widespread use in clinical applications, especially in bonding with dental resin composites. Cutting edge research on novel methods to improve PEEK applications in dentistry, including oral implant, prosthodontics and orthodontics, is reviewed in this article. In addition, this article also discusses innovative surface modifications of PEEK, which are a focus area of active investigations. Furthermore, this article also discusses the necessary future studies and clinical trials for the use of PEEK in the human oral environment to investigate its feasibility and long-term performance.

Interpenetrating Gels as Conducting/Adhering Matrices Enabling High-Performance Silicon Anodes

2021 ◽  
Author(s):  
Tingting Xia ◽  
Chengfei Xu ◽  
Pengfei Dai ◽  
Xiaoyun Li ◽  
Riming Lin ◽  
...  
Keyword(s):  
Energy Storage ◽  
High Performance ◽  
Electrode Materials ◽  
Three Dimensional ◽  
Electrochemical Energy Storage ◽  
Active Materials ◽  
Silicon Anodes ◽  
Weak Binding ◽  
Binding Forces

Three-dimensional (3D) conductive polymers are promising conductive matrices for electrode materials toward electrochemical energy storage. However, their fragile nature and weak binding forces with active materials could not guarantee long-term...

scholarly journals Tracking Changes on Soil Structure and Organic Carbon Sequestration after 30 Years of Different Tillage and Management Practices

Agronomy ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 291
Author(s):  
Ramón Bienes ◽  
Maria Jose Marques ◽  
Blanca Sastre ◽  
Andrés García-Díaz ◽  
Iris Esparza ◽  
...  
Keyword(s):  
Triticum Aestivum ◽  
Organic Carbon ◽  
Management Practices ◽  
Management Strategies ◽  
Triticum Aestivum L ◽  
Field Trials ◽  
Conventional Tillage ◽  
Soil Parameters ◽  
Wilting Point

Long-term field trials are essential for monitoring the effects of sustainable land management strategies for adaptation and mitigation to climate change. The influence of more than thirty years of different management is analyzed on extensive crops under three tillage systems, conventional tillage (CT), minimum tillage (MT), and no-tillage (NT), and with two crop rotations, monoculture winter-wheat (Triticum aestivum L.) and wheat-vetch (Triticum aestivum L.-Vicia sativa L.), widely present in the center of Spain. The soil under NT experienced the largest change in organic carbon (SOC) sequestration, macroaggregate stability, and bulk density. In the MT and NT treatments, SOC content was still increasing after 32 years, being 26.5 and 32.2 Mg ha−1, respectively, compared to 20.8 Mg ha−1 in CT. The SOC stratification (ratio of SOC at the topsoil/SOC at the layer underneath), an indicator of soil conservation, increased with decreasing tillage intensity (2.32, 1.36, and 1.01 for NT, MT, and CT respectively). Tillage intensity affected the majority of soil parameters, except the water stable aggregates, infiltration, and porosity. The NT treatment increased available water, but only in monocropping. More water was retained at the permanent wilting point in NT treatments, which can be a disadvantage in dry periods of these edaphoclimatic conditions.

Sign in / Sign up

Export Citation Format

Share Document