scholarly journals A new generation of alloyed/multimetal chalcogenide nanowires by chemical transformation

2015 ◽  
Vol 1 (10) ◽  
pp. e1500714 ◽  
Author(s):  
Yuan Yang ◽  
Kai Wang ◽  
Hai-Wei Liang ◽  
Guo-Qiang Liu ◽  
Mei Feng ◽  
...  

One-dimensional metal chalcogenide nanostructures are important candidates for many technological applications such as photovoltaic and thermoelectric devices. However, the design and synthesis of one-dimensional metal chalcogenide nanostructured materials with controllable components and properties remain a challenge. We report a general chemical transformation process for the synthesis of more than 45 kinds of one-dimensional alloyed/hybrid metal chalcogenide nanostructures inherited from mother template TexSey@Se core-shell nanowires with tunable compositions. As many as nine types of monometal chalcogenide alloy nanowires (including AgSeTe, HgSeTe, CuSeTe, BiSeTe, PbSeTe, CdSeTe, SbSeTe, NiSeTe, and CoSeTe) can be synthesized. Alloyed and hybrid nanowires integrated with two or more alloyed metal chalcogenide phases can also be prepared. The compositions of all of these metal chalcogenide nanowires are tunable within a wide range. This protocol provides a new general route for the controllable synthesis of a new generation of one-dimensional metal chalcogenide nanostructures.

2019 ◽  
pp. 3-27 ◽  
Author(s):  
L. M. Kipriyanova ◽  
M. A. Kleshchev

Information on the aquatic and semiaquatic vegetation of the major watercourses of West Siberia is relatively scarce, while this of small rivers is practically absent. There are 430 rivers whose length exceeds 10 km within the Novosibirsk Region. The aim of our work was to study the phytocenotic diversity of their aquatic and semiaquatic vegetation. 130 geobotanical relevés were performed by the authors in July–August 2003–2005. The object was aquatic communities formed by true aquatic (submergent and floating-leaved) plants and semiaquatic ones with emergent plants and these of water′s edge. In total 10 watercourses were studied (Table 1): 2–3 in each of five geomorphologic regions within the forest-steppe zone (Table 2). The upper, middle and lower courses (Fig. 1, Table 1) with the length of 2–2.5 km were studied in each case to ensure the 4–5 repetition of main elements (stream pools and ridges) that would give a reliable information on their flora and vegetation. The sample plots were selected above the settlements, whenever possible in sites with no to intensive anthropogenic impact. The data were collected according to J. Braun-Blanquet (1964) approach. The relevés were done on the sample plot of 100 m2 placed in the most homogeneous part of the community or, in case of its smaller area, within the natural boundaries. The following scale was used for abundance estimation: r — the species is extremely rare; + — rare, small cover; 1 — the number of individuals is large, the cover is small or individuals are sparse, but the cover is large; 2 —cover of 5–25 %; 3 — 26–50 %; 4 — 51–75 %; 5 — more than 75 %. The date on water depth, transparency (on a white Secchi disk with a diameter of 30 cm), temperature and the flow rate were obtained. The soil mechanical composition and color, the degree and nature of anthropogenic impact on vegetation and river banks were quantified. Water samples for general chemical analysis were taken in the middle course of each river. Computer programs TURBOVEG and MEGATAB (Hennekens, 1996) were used for database. The syntaxonomic affiliation of phytocenoses was determined using modern literature (Bobrov, Chemeris, 2006; Vegetace..., 2011; Chepinoga, 2015; Landucci et al. 2015; Mucina et al., 2016, etc.). 36 associations and 3 communities belonging to 12 alliances, 9 orders, and 5 classes have been identified (Tables 3–14, Fig. 2–9). Such great syntaxonomic diversity is determined by the significant ecotopic variety, the variability of substrates, the wide range of water flow rates and the different water trophicity. For comparison, 26 associations, 13 variants, 2 communities were identified in the study of 50 rivers of Lithuania (Sinkyavichene, 1992); altogether 84 associations are known for the Upper Volga region as a whole (Bob­rov, Chemeris, 2006), while 45 ones were recorded previously in 130 watercourses of this region (Bobrov, 1999). Information on small river macroalgae cenoses in the study area is partially reflected in the paper published earlier (Bobrov et al., 2005).


Antioxidants ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 1224
Author(s):  
Stefania Marano ◽  
Cristina Minnelli ◽  
Lorenzo Ripani ◽  
Massimo Marcaccio ◽  
Emiliano Laudadio ◽  
...  

Synthetic nitrone spin-traps are being explored as therapeutic agents for the treatment of a wide range of oxidative stress-related pathologies, including but not limited to stroke, cancer, cardiovascular, and neurodegenerative diseases. In this context, increasing efforts are currently being made to the design and synthesis of new nitrone-based compounds with enhanced efficacy. The most researched nitrones are surely the ones related to α-phenyl-tert-butylnitrone (PBN) and 5,5-dimethyl-1-pyrroline N-oxide (DMPO) derivatives, which have shown to possess potent biological activity in many experimental animal models. However, more recently, nitrones with a benzoxazinic structure (3-aryl-2H-benzo[1,4]oxazin-N-oxides) have been demonstrated to have superior antioxidant activity compared to PBN. In this study, two new benzoxazinic nitrones bearing an electron-withdrawing methoxycarbonyl group on the benzo moiety (in para and meta positions respect to the nitronyl function) were synthesized. Their in vitro antioxidant activity was evaluated by two cellular-based assays (inhibition of AAPH-induced human erythrocyte hemolysis and cell death in human retinal pigmented epithelium (ARPE-19) cells) and a chemical approach by means of the α,α-diphenyl-β-picrylhydrazyl (DPPH) scavenging assay, using both electron paramagnetic resonance (EPR) spectroscopy and UV spectrophotometry. A computational approach was also used to investigate their potential primary mechanism of antioxidant action, as well as to rationalize the effect of functionalization on the nitrones reactivity toward DPPH, chosen as model radical in this study. Further insights were also gathered by exploring the nitrone electrochemical properties via cyclic voltammetry and by studying their kinetic behavior by means of EPR spectroscopy. Results showed that the introduction of an electron-withdrawing group in the phenyl moiety in the para position significantly increased the antioxidant capacity of benzoxazinic nitrones both in cell and cell-free systems. From the mechanistic point of view, the calculated results closely matched the experimental findings, strongly suggesting that the H-atom transfer (HAT) is likely to be the primary mechanism in the DPPH quenching.


Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1651
Author(s):  
Cristina Arqueros ◽  
Félix Zamora ◽  
Carmen Montoro

Global population growth and water resource scarcity are significant social problems currently being studied by many researchers focusing on finding new materials for water treatment. The aim is to obtain quality water suitable for drinking and industrial consumption. In this sense, an emergent class of crystalline porous materials known as Covalent-Organic Frameworks (COFs) offers a wide range of possibilities since their structures can be designed on demand for specific applications. Indeed, in the last decade, many efforts have been made for their use in water treatment. This perspective article aims to overview the state-of-the-art COFs collecting the most recent results in the field for water detection of pollutants and water treatment. After the introduction, where we overview the classical design strategies on COF design and synthesis for obtaining chemically stable COFs, we summarize the different experimental methodologies used for COFs processing in the form of supported and free-standing membranes and colloids. Finally, we describe the use of COFs in processes involving the detection of pollutants in water and wastewater treatment, such as the capture of organic compounds, heavy metals, and dyes, the degradation of organic pollutants, as well as in desalination processes. Finally, we provide a perspective on the field and the potential technological use of these novel materials.


Author(s):  
E. Thilliez ◽  
S. T. Maddison

AbstractNumerical simulations are a crucial tool to understand the relationship between debris discs and planetary companions. As debris disc observations are now reaching unprecedented levels of precision over a wide range of wavelengths, an appropriate level of accuracy and consistency is required in numerical simulations to confidently interpret this new generation of observations. However, simulations throughout the literature have been conducted with various initial conditions often with little or no justification. In this paper, we aim to study the dependence on the initial conditions of N-body simulations modelling the interaction between a massive and eccentric planet on an exterior debris disc. To achieve this, we first classify three broad approaches used in the literature and provide some physical context for when each category should be used. We then run a series of N-body simulations, that include radiation forces acting on small grains, with varying initial conditions across the three categories. We test the influence of the initial parent body belt width, eccentricity, and alignment with the planet on the resulting debris disc structure and compare the final peak emission location, disc width and offset of synthetic disc images produced with a radiative transfer code. We also track the evolution of the forced eccentricity of the dust grains induced by the planet, as well as resonance dust trapping. We find that an initially broad parent body belt always results in a broader debris disc than an initially narrow parent body belt. While simulations with a parent body belt with low initial eccentricity (e ~ 0) and high initial eccentricity (0 < e < 0.3) resulted in similar broad discs, we find that purely secular forced initial conditions, where the initial disc eccentricity is set to the forced value and the disc is aligned with the planet, always result in a narrower disc. We conclude that broad debris discs can be modelled by using either a dynamically cold or dynamically warm parent belt, while in contrast eccentric narrow debris rings are reproduced using a secularly forced parent body belt.


Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 327
Author(s):  
Morwenna J. Spear ◽  
Simon F. Curling ◽  
Athanasios Dimitriou ◽  
Graham A. Ormondroyd

Wood modification is now widely recognized as offering enhanced properties of wood and overcoming issues such as dimensional instability and biodegradability which affect natural wood. Typical wood modification systems use chemical modification, impregnation modification or thermal modification, and these vary in the properties achieved. As control and understanding of the wood modification systems has progressed, further opportunities have arisen to add extra functionalities to the modified wood. These include UV stabilisation, fire retardancy, or enhanced suitability for paints and coatings. Thus, wood may become a multi-functional material through a series of modifications, treatments or reactions, to create a high-performance material with previously impossible properties. In this paper we review systems that combine the well-established wood modification procedures with secondary techniques or modifications to deliver emerging technologies with multi-functionality. The new applications targeted using this additional functionality are diverse and range from increased electrical conductivity, creation of sensors or responsive materials, improvement of wellbeing in the built environment, and enhanced fire and flame protection. We identified two parallel and connected themes: (1) the functionalisation of modified timber and (2) the modification of timber to provide (multi)-functionality. A wide range of nanotechnology concepts have been harnessed by this new generation of wood modifications and wood treatments. As this field is rapidly expanding, we also include within the review trends from current research in order to gauge the state of the art, and likely direction of travel of the industry.


In 1980 it was only possible to express foreign genes in bacteria and a few easily cultured animal cells. During the subsequent eight years specialized vectors have been developed to allow the genetic manipulation of a wide range of both prokaryotes and eukaryotes. One of the major goals of biotechnology in 1980 was to use host cells as ‘factories’ for the production of proteins that were only available in minute quantities from natural sources. This has already lead to a new generation of pharmaceutical products. Advances in our understanding of host-vector systems have defined new goals. The basic concepts of expression vector design will be illustrated. Some of the new goals are discussed with particular reference to the exploitation of novel host-vector systems to develop vaccines and anti-viral agents against AIDS.


2014 ◽  
Vol 49 ◽  
pp. 180-186 ◽  
Author(s):  
Jing Li ◽  
Xiaoxu wang ◽  
Ruibin Liu ◽  
Lijie shi ◽  
Muhammad Arshad Kamran ◽  
...  

2016 ◽  
Vol 30 (25) ◽  
pp. 1650184 ◽  
Author(s):  
Moumita Dey ◽  
Santanu K. Maiti

In the present work, we propose that a one-dimensional quantum heterostructure composed of magnetic and non-magnetic (NM) atomic sites can be utilized as a spin filter for a wide range of applied bias voltage. A simple tight-binding framework is given to describe the conducting junction where the heterostructure is coupled to two semi-infinite one-dimensional NM electrodes. Based on transfer matrix method, all the calculations are performed numerically which describe two-terminal spin-dependent transmission probability along with junction current through the wire. Our detailed analysis may provide fundamental aspects of selective spin transport phenomena in one-dimensional heterostructures at nanoscale level.


Stroke ◽  
2014 ◽  
Vol 45 (suppl_1) ◽  
Author(s):  
Ajay K Wakhloo ◽  
Pedro Lylyk ◽  
Joost de Vries ◽  
Matthew J Gounis ◽  
Alexandra Biondi ◽  
...  

Objective: Validated through experimental studies a new generation of flow diverters (Surpass™ FD) was evaluated for treatment of intracranial aneurysms (IA). We present our multicenter preliminary clinical and angiographic experience. METHODS: To achieve the calculated flow disruption between the parent artery and aneurysm for thrombosis, single FDs were placed endovascularly in parent arteries. Implants measured 2.5-5.3mm in diameter with a length of 10-80mm. Patients were enrolled harboring a wide range large and giant wide-neck, fusiform and multiple small and blister-type aneurysm. Clinical and angiographic follow-up were performed at 1-3, 6, and 12 months. RESULTS: A total of 186 consecutive IA in 161 patients (mean age 57.1 years) were treated at 33 centers. Fifty-three aneurysms were smaller than 5 mm, 64 were 5-9.9mm in diameter, 47 were 10-20mm in diameter, and 22 were larger than 20mm (10.4±0.7mm, neck size 6.0±0.5mm [mean±SEM]) . The aneurysms originated in 63.4% from the internal carotid artery; 22% and 14.5% of the lesions were located in the anterior circulation distal to Circle of Willis and posterior circulation respectively. Technical success was achieved in 182 aneurysms (98%); average number of devices used per aneurysm was 1.05. Permanent morbidity and mortality during the follow-up period of mean 8.4months (range 1-24 months) including periprocedural complications for patients with aneurysms of the anterior circulation were encountered in 5 (3.7%) and 2 (1.5 %) patients respectively and 1 (3.7%) and 4 (14.8%) respectively for patients with aneurysms of the posterior circulation location. One-hundred-ten patients (70.5%) harboring 127 (70.2%) were available for clinical and angiographic follow-up and showed a complete or near complete aneurysm occlusion in 63 (81.8%) of the ICA. Aneurysms of the ICA≥10mm that were completely covered by FD and not previously stent-treated with a minimum of 6 months follow-up available in 16 patients showed a complete obliteration in 81.3% (n=13) and >90% occlusion in remaining 3 patients. CONCLUSION: Preliminary data demonstrate high safety and efficacy of a new generation of FD for a wide range of IA of the anterior and posterior circulation with a single implant.


2021 ◽  
Vol 27 (1) ◽  
pp. 9-17
Author(s):  
V. P. Bui ◽  
◽  
S. S. Gavruishin ◽  
V. B. Phung ◽  
H. M. Dang ◽  
...  

A new technique is described, used by the authors to automate the design process of the main drive of a new generation machine intended for industrial washing of fruits and vegetables. To solve the problem of multi-criteria design, the original approach is proposed that uses interconnected mathematical models describing the dynamic behavior, strength reliability and functional characteristics of the machine in a unified information space. The generalized mathematical model includes 12 controlled parameters, 16 functional constraints, and 3 quality criteria. A genetic algorithm was used to find the space of Pareto-optimal solutions. The situational approach was used to select the final rational solution from a set of solutions belonging to the Pareto-optimal domain. The rational design of option the washer found using the proposed approach is compared with the existing ones. The proposed design methodology can be recommended for the design of a wide range of similar mechanical structures.


Sign in / Sign up

Export Citation Format

Share Document