Preparation of yolk–shell structured Ag@Cu particles and their application in high performance electrochemical sensing of p-aminobenzoic acid

2019 ◽  
Vol 97 (2) ◽  
pp. 140-146
Author(s):  
Tian Gan ◽  
Zhikai Wang ◽  
Mengru Chen ◽  
Wanqiu Fu ◽  
Haibo Wang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Performance ◽  
Electrochemical Impedance ◽  
High Sensitivity ◽  
Differential Pulse ◽  
Electrochemical Sensing ◽  
High Catalytic Activity ◽  
Aminobenzoic Acid ◽  
Transmission Electron

In this work, the Ag@Cu particles with yolk–shell nanostructure was prepared by facile solvothermal method, which was modified on glassy carbon electrode (GCE) to fabricate electrochemical sensor for the convenient and fast determination of p-aminobenzoic acid (PABA). The surface morphology and electrochemical properties of the as-prepared Ag@Cu nanocomposite modified electrode were characterized by scanning electron microscopy, transmission electron microscopy, chronocoulometry, and electrochemical impedance spectroscopy. Further, the electrochemical sensing of PABA was performed on the Ag@Cu/GCE using cyclic voltammetry and differential pulse voltammetry techniques, showing high catalytic activity. Under the optimal conditions, the sensor exhibited a wide linear range, high sensitivity, and low detection limit of 0.315 μmol/L for PABA. The developed sensor was also successfully applied for PABA detection in anesthetic and cosmetics with satisfactory results.

scholarly journals Construction of a simple and selective electrochemical sensor based on Nafion/TiO2 for the voltammetric determination of olopatadine

2021 ◽  
Author(s):  
Mohammad Mehmandoust ◽  
Amirhossein Mehmandoust ◽  
Nevin Erk
Keyword(s):  
High Performance ◽  
Electrochemical Impedance ◽  
Titanium Dioxide Nanoparticles ◽  
Differential Pulse ◽  
Screen Printed Electrode ◽  
Limit Of Quantification ◽  
Transmission Electron ◽  
Performance Ability ◽  
Screen Printed

A selective and facile voltammetric method based on titanium dioxide nanoparticles and Nafion (Nafion/TiO2 NPs) on the screen-printed electrode (SPE) was proposed for olopatadine determination. Followed by the synthesis of TiO2 nanoparticles, various methods, including high-resolution transmission electron microscopy (HR-TEM), ultraviolet-visible spectroscopy (UV-Vis), energy-dispersive X-ray (EDX) Raman spectrum, and electrochemical impedance spectroscopy (EIS) were utilized to characterize the nanomaterials. Nafion/TiO2 on the screen-printed electrode (NFN/TiO2/SPE) was used to determine olopatadine in concentration ranges of 0.01 to 0.07 and 0.07 to 14.6 µM with a limit of quantification as low as 7.0 nM, via differential pulse voltammetry technique. The NFN/TiO2/SPE offered a high-performance ability to determine olopatadine in the eye drop sample with satisfactory recovery data of 98.2–99.0 %. Also, the developed electrode showed good reproducibility, repeatability, and high selectivity features. The obtained results indicate that NFN/TiO2/SPE could be utilized as an appropriate candidate for electrochemical olopatadine sensing.

Synthesis of Trilaminar Core–Shell Au/α-Fe2O3@SnO2Nanocomposites and their Application for Nonenzymatic Dopamine Electrochemical Sensing

NANO ◽  
2019 ◽  
Vol 14 (11) ◽  
pp. 1950138 ◽  
Author(s):  
Sai Zhang ◽  
Shijun Yue ◽  
Jiajia Li ◽  
Jianbin Zheng ◽  
Guojie Gao
Keyword(s):  
Electron Microscopy ◽  
High Sensitivity ◽  
Electrochemical Sensing ◽  
Synthesis Process ◽  
Core Shell ◽  
X Ray Diffraction ◽  
X Ray ◽  
Long Term Stability ◽  
Transmission Electron

Au nanoparticles anchored on core–shell [Formula: see text]-Fe2O3@SnO2 nanospindles were successfully constructed through hydrothermal synthesis process and used for fabricating a novel nonenzymatic dopamine (DA) sensor. The structure and morphology of the Au/[Formula: see text]-Fe2O3@SnO2 trilaminar nanohybrid film were characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The electrochemical properties of the sensor were investigated by cyclic voltammetry and amperometry. The experimental results suggest that the composites have excellent catalytic property toward DA with a wide linear range from 0.5[Formula: see text][Formula: see text]M to 0.47[Formula: see text]mM, a low detection limit of 0.17[Formula: see text][Formula: see text]M (S/[Formula: see text]) and high sensitivity of 397.1[Formula: see text][Formula: see text]A[Formula: see text]mM[Formula: see text][Formula: see text]cm[Formula: see text]. In addition, the sensor exhibits long-term stability, good reproducibility and anti-interference.

Laccase Biosensor Based on Ag-Doped TiO2 Nanoparticles on CuCNFs for the Determination of Hydroquinone

NANO ◽  
2016 ◽  
Vol 11 (12) ◽  
pp. 1650132 ◽  
Author(s):  
Jie Yang ◽  
Dawei Li ◽  
Zengyuan Pang ◽  
Qufu Wei
Keyword(s):  
Electron Microscopy ◽  
Storage Stability ◽  
Electrochemical Impedance ◽  
The Novel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
New Material ◽  
And Storage

A novel nanomaterial composed of copper and carbon nanofibers (CuCNFs) decorated with Ag-doped TiO2 (Ag–TiO[Formula: see text] nanoparticles was prepared through electrospinning, carbonization and solvothermal treatment. The composites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS). The obtained composites were mixed with laccase and Nafion to construct novel hydroquinone biosensor. The electrochemical behavior of the novel biosensor was studied using cyclic voltammetry (CV) and chronoamperometry. The results demonstrated that the biosensor possessed a wide detection linear range (1.20–176.50[Formula: see text][Formula: see text]M), a good selectivity, repeatability, reproducibility and storage stability. This work provides a new material to design more efficient laccase (Lac) based biosensor for hydroquinone detection.

scholarly journals Sonochemically Prepared GdWNFs/CNFs Nanocomposite As An Electrode Material For The Electrochemical Detection of Antibiotic Drug in Water Bodies

2021 ◽  
Author(s):  
Manikanta P ◽  
Hari Prasad B R ◽  
Sanjay B P ◽  
Sandeep S ◽  
Santhosh A S ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Differential Pulse ◽  
Electrochemical Sensing ◽  
Pencil Graphite Electrode ◽  
X Ray Diffraction ◽  
Standard Samples ◽  
Tem Analysis ◽  
X Ray ◽  
Transmission Electron ◽  
Antibiotic Drug

Abstract The work demonstrates the development of an electrochemical sensor for quantification of Chloramphenicol (CA) using pencil graphite electrode (PGE) modified with Gadolinium tungstate nano flakes and carbon nano fibers composite (PGE/GWNfs/CNFs). The composite was further characterized and confirmed by X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), Transmission electron microscopy (TEM) analysis. The prepared GWNfs/CNFs nano composite was fabricated by drop casting method to get PGE/GWNfs/CNFs working electrode. The modified electrode is then analyzed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) methods for its electrochemical and electrocatalytic property. The electrochemical investigation of developed sensor shows enhanced activity towards electro-oxidation of CA. The DPV studies revealed high efficacy characteristics such as sensitivity in the range 0.03984 µA µM-1cm-2, selectivity, good linear range (5-50 μM), and low detection limit (0.4 μM). The study benchmarks the use of GWNfs/CNFs as an excellent transducer material in electrochemical sensing of CA in standard samples thus, it finds an efficient potential application in the analysis of CA in environment sample analysis.

scholarly journals Sensitive and Selective Electrochemical Detection of Epirubicin as Anticancer Drug Based on Nickel Ferrite Decorated with Gold Nanoparticles

Micromachines ◽  
2021 ◽  
Vol 12 (11) ◽  
pp. 1334
Author(s):  
Mohammad Mehmandoust ◽  
Nevin Erk ◽  
Ceren Karaman ◽  
Fatemeh Karimi ◽  
Sadegh Salmanpour
Keyword(s):  
Electron Microscopy ◽  
Gold Nanoparticles ◽  
Nickel Ferrite ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
X Ray ◽  
Transmission Electron ◽  
The Stability ◽  
Electrochemical Electrode

The accurate and precise monitoring of epirubicin (EPR), one of the most widely used anticancer drugs, is significant for human and environmental health. In this context, we developed a highly sensitive electrochemical electrode for EPR detection based on nickel ferrite decorated with gold nanoparticles (Au@NiFe2O4) on the screen-printed electrode (SPE). Various spectral characteristic methods such as Fourier transform infrared spectra (FT-IR), X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-Vis), energy-dispersive X-ray spectroscopy (EDX) and electrochemical impedance spectroscopy (EIS) were used to investigate the surface morphology and structure of the synthesized Au@NiFe2O4 nanocomposite. The novel decorated electrode exhibited a high electrocatalytic activity toward the electrooxidation of EPR, and a nanomolar limit of detection (5.3 nM) was estimated using differential pulse voltammetry (DPV) with linear concentration ranges from 0.01 to 0.7 and 0.7 to 3.6 µM. The stability, selectivity, repeatability reproducibility and reusability, with a very low electrode response detection limit, make it very appropriate for determining trace amounts of EPR in pharmaceutical and clinical preparations.

scholarly journals The Effect of rGO-Doping on the Performance of SnO2/rGO Flexible Humidity Sensor

Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3368
Author(s):  
Huangping Yan ◽  
Zilu Chen ◽  
Linyuan Zeng ◽  
Zijun Wang ◽  
Gaofeng Zheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Performance ◽  
Humidity Sensor ◽  
High Sensitivity ◽  
Polyimide Film ◽  
Fast Response ◽  
Humidity Sensing ◽  
Transmission Electron ◽  
Bending Radius ◽  
New Applications

The development of a flexible and high-performance humidity sensor is essential to expand its new applications, such as personal health monitoring and early diagnosis. In this work, SnO2/rGO nanocomposites were prepared by one-step hydrothermal method. The effect of rGO-doping on humidity sensing performance was investigated. Scanning electron microscopy, transmission electron microscopy, X-ray diffraction and Raman spectroscopy were used to characterize the nanostructure, morphology and chemical composition of SnO2/rGO nanocomposites. The SnO2/rGO humidity sensitive film was prepared by electrospinning on a polyimide film modified with gold electrodes. The humidity test results show that different doping ratios of rGO have different effects on humidity sensing properties. Among them, the sensor with 2 wt% rGO-doping has a high sensitivity (37,491.2%) within the humidity range as well as the fast response time (80 s) and recover time (4 s). Furthermore, the sensor with 2 wt% rGO-doping remains good flexibility and stability in the case of bending (1000 times). The sensitivity of the 2 wt% rGO-doping sensor at the bending radius (8 mm and 4 mm) is 48,219% and 91,898%, respectively. More importantly, the sensor could reflect different breathing states clearly and track breathing intervals as short as 3 s. The SnO2/rGO flexible humidity sensor with accuracy, flexibility and instantaneity as well as the facile fabrication strategy is conceivable to be applied in the potential application for human health real-time monitoring.

scholarly journals 3D-Flower-Like Copper Sulfide Nanoflake-Decorated Carbon Nanofragments-Modified Glassy Carbon Electrodes for Simultaneous Electrocatalytic Sensing of Co-existing Hydroquinone and Catechol

Sensors ◽  
2019 ◽  
Vol 19 (10) ◽  
pp. 2289 ◽  
Author(s):  
Lina Abdullah Alshahrani ◽  
Liqiong Miao ◽  
Yanyu Zhang ◽  
Shengming Cheng ◽  
Palanivel Sathishkumar ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Glassy Carbon ◽  
Photoelectron Spectroscopy ◽  
Copper Sulfide ◽  
Environmental Pollutants ◽  
Differential Pulse ◽  
Glassy Carbon Electrodes ◽  
X Ray ◽  
Transmission Electron

A copper sulfide nanoflakes-decorated carbon nanofragments-modified glassy carbon electrode (CuS-CNF/GCE) was fabricated for the electrocatalytic differentiation and determination of hydroquinone (HQ) and catechol (CC). The physicochemical properties of the CuS-CNF were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and Raman spectroscopy. The electrocatalytic determination of HQ and CC over the CuS-CNF/GCE was evaluated by cyclic voltammetry and differential pulse voltammetry. An excellent detection limit and sensitivity of the CuS-CNF/GCE are obtained (0.293 µM and 0.259 µM) with a sensitivity of 184 nA µM−1 cm−2 and 208 nA µM−1 cm−2 (S/N=3) for HQ and CC, respectively. In addition, the CuS-CNF/GCE shows a selective identification of HQ and CC over potential interfering metal ions (Zn2+, Na+, K+, NO3−, SO42−, Cl−) and organic compounds (ascorbic acid, glucose), and a satisfactory recovery is also obtained in the spiked water samples. These results suggest that the CuS-CNF/GCE can be used as an efficient electrochemical sensor for the simultaneous determination of co-existing environmental pollutants such as HQ and CC in water environments with high selectivity and acceptable reproducibility.

scholarly journals Preparation of Imazethapyr Surface Molecularly Imprinted Polymers for Its Selective Recognition of Imazethapyr in Soil Samples

2018 ◽  
Vol 2018 ◽  
pp. 1-9
Author(s):  
Yanqiang Zhou ◽  
Yinhui Yang ◽  
Meihua Ma ◽  
Zhian Sun ◽  
Shanshan Wu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
High Performance ◽  
Limit Of Detection ◽  
Solid Phase ◽  
Selective Extraction ◽  
Soil Samples ◽  
Specific Recognition ◽  
Transmission Electron ◽  
Novel Strategy

A novel strategy based on imazethapyr (IM) molecular-imprinting polymers (MIPs) grafted onto the surface of chloromethylation polystyrene resin via surface-initiated atom transfer radical polymerization (SI-ATRP) for specific recognition and sensitive determination of trace imazethapyr in soil samples was developed. The SI-ATRP was performed by using methanol-water (4 : 1, v/v) as the solvent, acrylamide as the functional monomer, trimethylolpropane trimethacrylate (TRIM) as the cross-linker, imazethapyr as the template, and CuBr/2,2′-bipyridine as the catalyst. The resulting MIPs were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Then, the binding selectivity, adsorption capacity, and reusability of the MIPs were evaluated. The results indicated that the prepared MIPs exhibited specific recognition and high selectivity for imazethapyr. The MIPs were further used as solid-phase extraction (SPE) materials coupled with high-performance liquid chromatography (HPLC) for selective extraction and detection of trace imazethapyr from soil samples. The results showed that good linearity was observed in the range of 0.10–5.00 μg/mL, with a correlation coefficient of 0.9995. The limit of detection (LOD) of this method was 15 ng/g, and the extraction recoveries of imazethapyr from real samples were in the range of 91.1–97.5%, which proved applicable for analysis of trace imazethapyr in soils. This work proposed a sensitive, rapid, and convenient approach for determination of trace imazethapyr in soil samples.

scholarly journals An amperometric H2O2 biosensor based on hemoglobin nanoparticles immobilized on to a gold electrode

2017 ◽  
Vol 37 (4) ◽  
Author(s):  
Vinay Narwal ◽  
Neelam Yadav ◽  
Manisha Thakur ◽  
Chandra S. Pundir
Keyword(s):  
Electron Microscopy ◽  
Electrochemical Impedance ◽  
Uv Spectroscopy ◽  
Colorimetric Method ◽  
High Sensitivity ◽  
Electrochemical Impedance Spectra ◽  
Sodium Phosphate Buffer ◽  
Transmission Electron ◽  
Before And After ◽  
Optimum Response

The nanoparticles (NPs) of hemoglobin (Hb) were prepared by desolvation method and characterized by transmission electron microscopy (TEM), UV spectroscopy and Fourier-transform IR (FTIR) spectroscopy. An amperometric H2O2 biosensor was constructed by immobilizing HbNPs covalently on to a polycrystalline Au electrode (AuE). HbNPs/AuE were characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) before and after immobilization of HbNPs. The HbNPs/AuE showed optimum response within 2.5 s at pH 6.5 in 0.1 M sodium phosphate buffer (PB) containing 100 μM H2O2 at 30°C, when operated at –0.2 V against Ag/AgCl. The HbNPs/AuE exhibited Vmax of 5.161 ± 0.1 μA cm−2 with apparent Michaelis-Menten constant (Km) of 0.1 ± 0.01 mM. The biosensor showed lower detection limit (1.0 μM), high sensitivity (129 ± 0.25 μA cm−2 mM−1) and wider linear range (1.0–1200 μM) for H2O2 as compared with earlier biosensors. The analytical recoveries of added H2O2 in serum (0.5 and 1.0 μM) were 97.77 and 98.01% respectively, within and between batch coefficients of variation (CV) were 3.16 and 3.36% respectively. There was a good correlation between sera H2O2 values obtained by standard enzymic colorimetric method and the present biosensor (correlation coefficient, R2 =0.99). The biosensor measured H2O2 level in sera of apparently healthy subjects and persons suffering from diabetes type II. The HbNPs/AuE lost 10% of its initial activity after 90 days of regular use, when stored dry at 4°C.

scholarly journals Modification of screen printed gold electrode with 1,4-dithiothreitol: Application to sensitive voltammetric determination of Sudan II

2020 ◽  
Author(s):  
Kuddusi Karaboduk
Keyword(s):  
High Performance ◽  
Gold Electrode ◽  
Electrochemical Impedance ◽  
Reference Method ◽  
Differential Pulse ◽  
Peak Current ◽  
Ft Ir ◽  
Recovery Percentage ◽  
Screen Printed

Abstract Objectives The aim of this study is to investigate the electrochemical behavior of Sudan II (SuII) using a screen printed gold electrode (SPGE) modified with 1,4-dithiothreitol (DTT) and to determine the amount of Sudan II by voltammetry. Materials and Methods A DTT modified screen printed gold electrode (DTT/SPGE) was fabricated and its application for differential pulse voltammetric (DPV) determination of SuII was reported. Fourier transform infrared spectroscopy (FT-IR), cyclic voltammetry (CV) and electrochemical impedance spectroscopy were used for the characterization of modified electrode. The effects of instrumental and chemical parameters were optimized for the determination of SuII. The fabricated electrode was used for the analysis of SuII in fortified and real samples. High performance liquid chromatography (HPLC) was preferred as a reference method for the evaluation of the obtained voltammetric results. Results The electrochemical studies and FT-IR demonstrated that the SPGE was modified with DTT. The obtained peak current at DTT/SPGE was 6.67 times higher than that recorded with SPGE. At the optimized conditions of DPV in pH = 2.5 of H2SO4, the oxidation peak current of SuII was proportional to its concentration in range: 0.001 - 1.500 μmol L -1 with a detection limit of 0.0002 μmol L -1 (S/N=3). For the analysis of SuII, 101.67 - 104.33% of recovery percentage was obtained. Conclusions A new electrode was successfully improved for the determination of SuII. This highly selective and sensitive electrode supplied the fast determination of SuII in ketchup, chili sauce and salsa dip sauce. In addition, voltammetric and chromatographic results are found to be consistent.

Sign in / Sign up

Export Citation Format

Share Document