Effect of particle size and CO2 treatment of waste cement powder on properties of cement paste

Author(s):  
Hamideh Mehdizadeh ◽  
Tung-Chai Ling ◽  
Xiongfei Cheng ◽  
Kim Hung Mo

This paper studies the role of CO2 treatment and the impact of particle size (<75 μm and 75-150 μm) of waste cement powder (WCP) with different cement replacement content (0%, 5%, 10%, 15%, 20%, and 30%) on the physical properties and microstructure of blended cement paste. The results show that carbonation of WCP can effectively increase the flowability of paste due to the formation of calcite and decrease the porosity of WCP microstructure, while the water demand to achieve the same workability decreases with increasing size of WCP particles. Cement paste containing decreased particles of carbonated waste cement powder (CWCP) possesses a higher 28-day compressive strength due to formation of a higher amount of calcite and hydration products, based on the thermogravimetric analysis.

Proceedings ◽  
2019 ◽  
Vol 34 (1) ◽  
pp. 9
Author(s):  
Joseph ◽  
Al-Bahar ◽  
Chakkamalayath ◽  
Al-Arbeed ◽  
Rasheed

One of the major concerns of concrete industries is to develop materials that consume less natural virgin resources and energy to make sustainable construction practices. Efforts have been made and even implemented to use the waste/by product materials such as fly ash, slag, silica fume, and natural pozzolana as a partial or complete replacement for Portland cement in concrete mixtures. The deterioration of concrete structures in the existing hot and cold climates of Gulf Cooperation Council countries, along with chloride and sulphate attack, demands the use of pozzolanic materials for concrete construction. Volcanic ash incorporated cement based concretes are known for its better performance in terms of strength and durability in harsh marine environments. Understanding the cement hydration process and characterizing the hydration products in microstructural level is a complex and interdependent process that allows one to design complex mix proportions to produce sustainable concrete materials. In this paper, the early and late age hydration behavior along with micro- and pore structure of cement paste samples prepared with locally available ordinary Portland cement (OPC) and volcanic ash (VA) obtained from Saudi Arabia was monitored using X-ray diffraction (XRD), scanning electron microscopy (SEM), thermogravimetric (TGA) and N2-Adsorption analysis. The hydration progress of cement paste samples with different combinations of OPC and VA (0%, 15%, 25%, and 35%) at a w/c ratio of 0.45 after 14, 28, and 90 days were discussed. The qualitative XRD and SEM of cement paste samples showed no new phases were formed during the course of hydration. The disappearance of portlandite with increase in VA content was due to both pozzolanic effect and dilution effect. This was further confirmed quantitatively by the TGA observations that the samples with VA contain less Ca(OH)2 compared to the control specimens. N2 adsorption experiments after 90 days of curing showed larger hysteresis as the VA content increases. The studies show that the incorporation of volcanic ash certainly contributes to the generation of C-S-H and hence the cement hydration progress, especially in the later ages through pozzolanic reactions. A 15–25 % volcanic ash blended cement paste samples showed compact and denser morphological features, which will be highly detrimental for the durability performances.


Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1362 ◽  
Author(s):  
Xiaowei Ouyang ◽  
Zichao Pan ◽  
Zhiwei Qian ◽  
Yuwei Ma ◽  
Guang Ye ◽  
...  

The interface between filler and hydration products can have a significant effect on the mechanical properties of the cement paste system. With different adhesion properties between filler and hydration products, the effect of microstructural features (size, shape, surface roughness), particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system is supposed to be different, as well. In order to understand the effect of the microstructural features, particle distribution and area fraction of filler on the fracture behavior of a blended cement paste system with either strong or weak filler-matrix interface, microscale simulations with a lattice model are carried out. The results show that the strength of the filler-matrix interface plays a more important role than the microstructural features, particle distribution and area fraction of filler in the crack propagation and the strength of blended cement paste. The knowledge acquired here provides a clue, or direction, for improving the performance of existing fillers. To improve the performance of fillers in cement paste in terms of strength, priority should be given to improving the bond strength between filler particles and matrix, not to modifying the microstructural features (i.e., shape and surface roughness) of the filler.


2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Wei He ◽  
Jihui Zhao ◽  
Gangqiang Yang

To clarify the role of steel slag powder in blended cement, steel slag powders with different amounts and particle sizes were mixed into blended cement and the inert quartz powder was selected as the reference. The influences of steel slag powder with different amounts and particle sizes on the hydration and hardening properties of blended cement were studied from hydration heat, nonevaporable water content, porosity, hydration products, and strength. The results show that the influence coefficient of nonevaporable water content (ՓWn) of blended cement paste is in an exponential relationship with the amount of steel slag powder. Moreover, at a dosage of 30%, ՓWn of blended cement gradually decreases with the increase of steel slag particle size. Both the early and late compressive strengths of blended cement are in a binomial relationship with the amount of steel slag powder. The influence coefficient of steel slag powder on the compressive strength of blended cement is negative at the age of 3 days, whereas it is positive at the age of 28 days. The chemical filling effect of 30% steel slag powder with different particle sizes in the blended cement paste is very small, only 1.13%–5.06%. The hydration products of blended cement containing steel slag are mainly amorphous C-S-H gels and platy Ca(OH)2, and their density are consistent with the law of their porosity.


2010 ◽  
Vol 113-116 ◽  
pp. 2283-2286
Author(s):  
Ming Zhang ◽  
Han Lu ◽  
Feng Xing ◽  
Shu Ping Wang

The paper studied effect of blast-furnace slag on rheology and hydration properties of blended cement paste. Rheology of blended cement paste with polycarboxylic series (PCS) and sulphamate series (SMS) superplasticizer is tested, appraised effect degree of the dosage and fineness of slag in blended cement by saturation dosage of superplasticizer, fluidity and gradual loss of fluidity. For hardened paste, the study tested development of strength and hydration products, activation effects of gypsum and sodium sulfate, analyzed macro mechanical behavior and micro structure of blend cement made from slag.


2020 ◽  
Author(s):  
Moruf O. Yusuf ◽  
Sami I. Shamsah ◽  
Khaled A. Al‐Sodani ◽  
Salihu Lukman

2022 ◽  
Vol 152 ◽  
pp. 106657
Author(s):  
M. Frías ◽  
S. Martínez-Ramírez ◽  
R. Vigil de la Villa ◽  
R. García-Giménez ◽  
M.I. Sánchez de Rojas

Sign in / Sign up

Export Citation Format

Share Document