Physical properties of the oleoresin system of the four major southern pines

1977 ◽  
Vol 7 (3) ◽  
pp. 520-525 ◽  
Author(s):  
John D. Hodges ◽  
William W. Elam ◽  
William F. Watson
Keyword(s):  
Physical Properties ◽  
Function Analysis ◽  
Total Yield ◽  
Morphological Characteristics ◽  
High Viscosity ◽  
High Rate ◽  
High Yield ◽  
Breast Height ◽  
Low Viscosity ◽  
Very High

Oleoresin viscosity, flow (rate, duration, and total amount), and rate of crystallization were determined for Pinuselliottii Engelm., Pinuspalustris Mill., Pinustaeda L., and Pinusechinata Mill, in central Louisiana, U.S.A. Physical properties of the oleoresin and tree morphological characteristics (diameter at breast height, growth rate, height, crown ratio, and age) were not strongly related in either of the four species. Pinuselliottii oleoresin was extremenly viscous, crystallized very slowly, and flowed at a slow rate over a long period, and total yield was moderate. Pinuspalustris oleoresin was of moderately high viscosity and very high yield and had a high rate of flow. Pinustaeda and Pinusechinata oleoresin had, on the average, low viscosity, a moderate to low total yield, a short duration of flow, and rapid rate of crystallization. A discriminant function analysis revealed that 19% of the Pinustaeda and 6% of the Pinusechinata trees had oleoresin properties more similar to Pinuspalustris and Pinuselliottii than to the means for their own species. This information is being used to assess tree susceptibility to attack by Dendroctonusfrontalis Zimm.

DURIMPHY

Alloy Digest ◽  
2007 ◽  
Vol 56 (2) ◽  
Keyword(s):  
Tensile Strength ◽  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
High Yield ◽  
High Yield Strength ◽  
Precision Alloys ◽  
Very High

Abstract Durimphy is a maraging steel with 1724 MPa (250 ksi) tensile strength and a very high yield strength due to precipitation hardening. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-140. Producer or source: Metalimphy Precision Alloys.

scholarly journals Kappa-Carrageenan-Based Dual Crosslinkable Bioink for Extrusion Type Bioprinting

Polymers ◽  
2020 ◽  
Vol 12 (10) ◽  
pp. 2377
Author(s):  
Wonseop Lim ◽  
Gyeong Jin Kim ◽  
Hyun Woo Kim ◽  
Jiyeon Lee ◽  
Xiaowei Zhang ◽  
...  
Keyword(s):  
Shear Stress ◽  
Physical Properties ◽  
New Technology ◽  
High Viscosity ◽  
3D Bioprinting ◽  
Cell Compatibility ◽  
Low Viscosity ◽  
Shape Retention ◽  
Kappa Carrageenan ◽  
Nih 3T3

Bioink based 3D bioprinting is a promising new technology that enables fabrication of complex tissue structures with living cells. The printability of the bioink depends on the physical properties such as viscosity. However, the high viscosity bioink puts shear stress on the cells and low viscosity bioink cannot maintain complex tissue structure firmly after the printing. In this work, we applied dual crosslinkable bioink using Kappa-carrageenan (κ-CA) to overcome existing shortcomings. κ-CA has properties such as biocompatibility, biodegradability, shear-thinning and ionic gelation but the difficulty of controlling gelation properties makes it unsuitable for application in 3D bioprinting. This problem was solved by synthesizing methacrylated Kappa-carrageenan (MA-κ-CA), which can be dual crosslinked through ionic and UV (Ultraviolet) crosslinking to form hydrogel using NIH-3T3 cells. Through MA substitutions, the rheological properties of the gel could be controlled to reduce the shear stress. Moreover, bioprinting using the cell-laden MA-κ-CA showed cell compatibility with enhanced shape retention capability. The potential to control the physical properties through dual crosslinking of MA-κ-CA hydrogel is expected to be widely applied in 3D bioprinting applications.

Mount Etna and the 1971 eruption - Lengths of lava flows

1973 ◽  
Vol 274 (1238) ◽  
pp. 107-118 ◽  
Keyword(s):  
Lava Flow ◽  
High Viscosity ◽  
Lava Flows ◽  
Mount Etna ◽  
High Rate ◽  
Low Viscosity ◽  
Depression Measurement ◽  
Lateral Extent ◽  
The One ◽  
Single Flow

The principal factor influencing the length of a lava flow is the rate of effusion. With a high rate the lava flows rapidly from the source and tends to form an extensive and far-reaching flow which is simple in character (i.e. made of a single flow unit). With a low rate the lava tends to pile up layer upon layer to form a local accumulation of limited lateral extent near the source, and this accumulation is strongly compound in character (i.e. divisible into flow units). The initial viscosity affects the length indirectly by controlling the thickness of the extrusion, and this thickness control is capable of accounting for the fact that the median length of low-viscosity basaltic extrusions is 3.2 times that of high-viscosity andesite, trachyte and rhyolite ones. Other factors, such as the local topography, are thought to be relatively unimportant, an exception being when lava is ponded in a topographic depression. Measurement of the rate of effusion may be critical in any attempt to predict the distance that a lava flow will travel, such as the one which threatened Fornazzo and other towns and villages on Etna in 1971.

PHYTIME

Alloy Digest ◽  
2007 ◽  
Vol 56 (3) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Yield Strength ◽  
Physical Properties ◽  
Tensile Properties ◽  
Precipitation Hardening ◽  
Heat Treating ◽  
High Yield ◽  
High Yield Strength ◽  
Precision Alloys ◽  
Very High

Abstract Phytime is a maraging steel with a 2068 MPa (300 ksi) strength and a very high yield strength due to precipitation hardening. The major improvement over Durimphy (see Alloy Digest Fe-140, February 2007) is cleanliness and improved fatigue performance. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: FE-141. Producer or source: Metalimphy Precision Alloys.

RODFLEX HIGH-YIELD

Alloy Digest ◽  
1973 ◽  
Vol 22 (10) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Cold Rolling ◽  
Physical Properties ◽  
Tensile Properties ◽  
High Strength ◽  
Heat Treating ◽  
High Yield ◽  
Corrosion Resistant ◽  
Very High

Abstract RODFLEX HIGH-YIELD is a stainless steel that develops exceptionally high strength levels by cold rolling. Rodflex 270 and Rodflex 290 are two grades with minimum tensile strengths of 270,000 and 290,000 psi, respectively. They provide a corrosion-resistant 300-type stainless alloy at the very high strength levels now being specified for many springs and related applications. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-289. Producer or source: Teledyne Rodney Metals.

scholarly journals PHYSICAL PROPERTIES OF GAMETES IN THREE SEA URCHIN SPECIES

1994 ◽  
Vol 194 (1) ◽  
pp. 263-284 ◽  
Author(s):  
F Thomas
Keyword(s):  
Physical Properties ◽  
Sea Urchin ◽  
Sea Urchins ◽  
Shear Thinning ◽  
High Viscosity ◽  
Wave Action ◽  
Shear Rates ◽  
Low Viscosity ◽  
Male Gametes ◽  
High Shear Rates

Physical properties (density in kg m-3, viscosity, sinking rates and dispersion rate) of the gametes and associated spawned materials were measured for three species of sea urchin, Tripneustes gratilla, Echinometra mathaei and Colobocentrotus atratus, from habitats that differ in wave exposure. The gametes of all three species are negatively buoyant, highly viscous and exhibit shear-thinning (a decrease in viscosity with increasing shear rate). Female gametes are more viscous than male gametes, and the viscosity of female gametes differs among the three species. The viscosity of female gametes is highest for C. atratus, the species from habitats most exposed to wave action. Within the species T. gratilla, viscosity of female gametes is higher in habitats exposed to wave action than in more protected habitats. Evidence reported in this paper suggests that the shear-thinning of gametes may provide a performance advantage for these sea urchins. High viscosity of gametes at low shear rates may decrease gamete dispersal upon release and, under certain flow conditions, allow gametes to form strings and clumps on the surface of the urchin. Depending upon the morphology of the surface, these clumps or strings may be retained and fertilization may occur within these clumps or strings. Conversely, low viscosity of gametes at high shear rates decreases the power required to extrude gametes through the gonoduct during spawning.

KARAKTERISASI SIFAT FISIKA DAN KIMIA CUKA KAYU DARI TANDAN KOSONG KELAPA SAWIT

2014 ◽  
Vol 6 (1) ◽  
pp. 35 ◽  
Author(s):  
Rizka Karima
Keyword(s):  
Specific Gravity ◽  
Physical Properties ◽  
Solid Waste ◽  
Ph Value ◽  
Total Yield ◽  
Chemical Properties ◽  
Phenol Content ◽  
Empty Fruit Bunches ◽  
Wood Vinegar ◽  
And Chemical Properties

There’s so many pal solid waste or palm empty fruit bunches, but the utilization is not maximized, this research its to optimized utilization of palm solid waste to be wood vinegar and want to know the composition physical properties and chemical properties of wood vinegar from palm empty fruit bunches. Total yield of wood vinegar from palm empty fruit bunches its 15,94 % and total yield of charcoal its 64,58 %. GCMS result showing chemical properties from wood vinegar of burning < 100oC its obtained 19 compound and burning >100 oC its obtained 6 compound. The result physichal properties testing from crued wood vinegar its obtained specific gravity 1,0005 and 1,0010, pH value are 3,233 and 3,186, TAT content are 9,36 % and 11,12 %, phenol content its 0,44 %. The result physical properties testing from wood vinegar which has decolorizatin by activated carbon its obtained specific gravity are 0,9987 and 0,999, pH value are 3,036 and 3,012, TAT content are 8,29 % and 9,27 % and phenol content its 0,01 %.Keywords: palm bunches, wood vinegar, liquid smoke

EVALUATION OF THE COMMON HOP VARIETY SAMPLES ACCORDING TO THE PHENOLOGICAL AND MORPHOLOGICAL FEATURES

2018 ◽  
pp. 40-42 ◽  
Author(s):  
А. А. Fadeev ◽  
Z. А. Nikonova
Keyword(s):  
Morphological Characteristics ◽  
Economic Importance ◽  
Morphological Features ◽  
High Yield ◽  
Early Maturity ◽  
Foreign Countries ◽  
Humulus Lupulus L ◽  
The Common ◽  
Regions Of Russia ◽  
Vegetative Season

The results of study of the 12 year cycle of studies on the only in Russia collection of hops ordinary (Humulus lupulus L.), which contains 250 samples from different regions of Russia and 17 foreign countries. The number of process varieties, composition and origin, it is unique and corresponds to world level. A collection of accessions of hops is a population of female plants with a set of phenological, morphological and economic importance of signs. In the article, the estimation of the collectible varieties of hops at different ripeness groups according to phenological and morphological characteristics according to the method of test for distinctness, uniformity and stability. As the result of the research the Common Hop (Humuluslupulus) sorts were classified in accordance with their maturity time as early maturity (less than 100 days) – 10%, middle-early (101…110 days) – 14, middle duration (111…120 days) – 40, middle-late (121…130 days) – 10% and slow-maturing (more than 130 days) – 26%. Each group has a phenotypic and morphologies features. The early maturity, middle-early and middle duration varieties with vegetative season approximately 120 days are more adaptive to the conditions of the Chuvashia and central part of the Russia and provide obtaining high yield of the hop cones.

MUMETAL

Alloy Digest ◽  
1991 ◽  
Vol 40 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Magnetic Alloy ◽  
High Permeability ◽  
Soft Magnetic ◽  
Soft Magnetic Alloy ◽  
Very High ◽  
Specialty Metals

Abstract MUMETAL is a very high permeability soft magnetic alloy. (See also Alloy Digest Ni-25, April 1956.) This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on heat treating. Filing Code: Ni-398. Producer or source: Spang Specialty Metals.

ALCOA 7075

Alloy Digest ◽  
1998 ◽  
Vol 47 (7) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
Stress Corrosion Cracking ◽  
High Strength ◽  
Structural Parts ◽  
7075 Alloy ◽  
Very High

Abstract Alcoa 7075 alloy has very high strength and is used for highly stressed structural parts. The T7351 temper offers improved stress-corrosion cracking resistance. The alloy’s strength level equals or exceeds mild steels. This datasheet provides information on composition, physical properties, and tensile properties. It also includes information on corrosion resistance as well as machining and surface treatment. Filing Code: AL-350. Producer or source: ALCOA Wire, Rod & Bar Division.

Sign in / Sign up

Export Citation Format

Share Document