Stereo Imagery Based Depth Sensing in Diverse Outdoor Environments

Author(s):  
Yuxian Zhang ◽  
Anat Caspi
Author(s):  
Robert Glaeser ◽  
Thomas Bauer ◽  
David Grano

In transmission electron microscopy, the 3-dimensional structure of an object is usually obtained in one of two ways. For objects which can be included in one specimen, as for example with elements included in freeze- dried whole mounts and examined with a high voltage microscope, stereo pairs can be obtained which exhibit the 3-D structure of the element. For objects which can not be included in one specimen, the 3-D shape is obtained by reconstruction from serial sections. However, without stereo imagery, only detail which remains constant within the thickness of the section can be used in the reconstruction; consequently, the choice is between a low resolution reconstruction using a few thick sections and a better resolution reconstruction using many thin sections, generally a tedious chore. This paper describes an approach to 3-D reconstruction which uses stereo images of serial thick sections to reconstruct an object including detail which changes within the depth of an individual thick section.


2019 ◽  
Vol E102.B (8) ◽  
pp. 1676-1688 ◽  
Author(s):  
Mitsuki NAKAMURA ◽  
Motoharu SASAKI ◽  
Wataru YAMADA ◽  
Naoki KITA ◽  
Takeshi ONIZAWA ◽  
...  

ROBOT ◽  
2011 ◽  
Vol 33 (3) ◽  
pp. 265-272 ◽  
Author(s):  
Bo ZHOU ◽  
Xianzhong DAI ◽  
Jianda HAN

Nanomaterials ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 15 ◽  
Author(s):  
Nikolay V. Perepelkin ◽  
Feodor M. Borodich ◽  
Alexander E. Kovalev ◽  
Stanislav N. Gorb

Classical methods of material testing become extremely complicated or impossible at micro-/nanoscale. At the same time, depth-sensing indentation (DSI) can be applied without much change at various length scales. However, interpretation of the DSI data needs to be done carefully, as length-scale dependent effects, such as adhesion, should be taken into account. This review paper is focused on different DSI approaches and factors that can lead to erroneous results, if conventional DSI methods are used for micro-/nanomechanical testing, or testing soft materials. We also review our recent advances in the development of a method that intrinsically takes adhesion effects in DSI into account: the Borodich–Galanov (BG) method, and its extended variant (eBG). The BG/eBG methods can be considered a framework made of the experimental part (DSI by means of spherical indenters), and the data processing part (data fitting based on the mathematical model of the experiment), with such distinctive features as intrinsic model-based account of adhesion, the ability to simultaneously estimate elastic and adhesive properties of materials, and non-destructive nature.


2019 ◽  
Vol 232 ◽  
pp. 111300
Author(s):  
Xiaogang Song ◽  
Nana Han ◽  
Xinjian Shan ◽  
Chisheng Wang ◽  
Yingfeng Zhang ◽  
...  

2020 ◽  
Vol 12 (4) ◽  
pp. 1360 ◽  
Author(s):  
Robert D. Brown ◽  
Robert C. Corry

More than 80% of the people in the USA and Canada live in cities. Urban development replaces natural environments with built environments resulting in limited access to outdoor environments which are critical to human health and well-being. In addition, many urban open spaces are unused because of poor design. This paper describes case studies where traditional landscape architectural design approaches would have compromised design success, while evidence-based landscape architecture (EBLA) resulted in a successful product. Examples range from school-yard design that provides safe levels of solar radiation for children, to neighborhood parks and sidewalks that encourage people to walk and enjoy nearby nature. Common characteristics for integrating EBLA into private, public, and academic landscape architecture practice are outlined along with a discussion of some of the opportunities and barriers to implementation.


2014 ◽  
Vol 606 ◽  
pp. 253-256 ◽  
Author(s):  
Martin Ovsik ◽  
Petr Kratky ◽  
David Manas ◽  
Miroslav Manas ◽  
Michal Stanek ◽  
...  

This article deals with the influence of different doses of Beta radiation to the structure and mico-mechanical properties of Low-density polyethylene (LDPE). Hard surface layers of polymer materials, especially LDPE, can be formed by radiation cross-linking by β radiation with doses of 33, 66 and 99 kGy. Material properties created by β radiation are measured by micro-hardness test using the DSI method (Depth Sensing Indentation). Individual radiation doses caused structural and micro-mechanical changes which have a significant effect on the final properties of the LDPE tested. The highest values of micro-mechanical properties were reached at radiation dose of 66 and 99 kGy, when the micro-hardness values increased by about 21%. The changes were examined and confirmed by X-ray diffraction.


Diversity ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 254
Author(s):  
Constance Woodman ◽  
Chris Biro ◽  
Donald J. Brightsmith

The release of captive-raised parrots to create or supplement wild populations has been critiqued due to variable survival rates and unreliable flocking behavior. Private bird owners free-fly their parrots in outdoor environments and utilize techniques that could address the needs of conservation breed and release projects. We present methods and results of a free-flight training technique used for 3 parrot flocks: A large-bodied (8 macaws of 3 species and 2 hybrids), small-bodied (25 individuals of 4 species), and a Sun Parakeet flock (4 individuals of 1 species). Obtained as chicks, the birds were hand-reared in an enriched environment. As juveniles, the birds were systematically exposed to increasingly complex wildland environments, mirroring the learning process of wild birds developing skills. The criteria we evaluated for each flock were predation rates, antipredator behavior, landscape navigation, and foraging. No parrots were lost to predation or disorientation during over 500 months of free-flight time, and all birds demonstrated effective flocking, desirable landscape navigation, and wild food usage. The authors conclude that this free-flight method may be directly applicable for conservation releases, similar to the use of falconry methods for raptor conservation.


Sign in / Sign up

Export Citation Format

Share Document